Attachment 222747 Details for Bug 253787 – 6 x 2.8TB RAID 10 (8.3TB) EFI serial console boot log

6 x 2.8TB RAID 10 (8.3TB) EFI serial console boot log

working-8.3tb.txt (text/plain), 7.26 KB, created by rallenh on 2021-02-23 07:07:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: rallenh

Created: 2021-02-23 07:07:59 UTC

Size: 7.26 KB

patch

obsolete

>        Press the spacebar to pause...
>
>        KEY MAPPING FOR CONSOLE REDIRECTION:
>
>        Use the <ESC><0> key sequence for <F10>
>        Use the <ESC><!> key sequence for <F11>
>        Use the <ESC><@> key sequence for <F12>
>
>        Use the <ESC><Ctrl><M> key sequence for <Ctrl><M>
>        Use the <ESC><Ctrl><H> key sequence for <Ctrl><H>
>        Use the <ESC><Ctrl><I> key sequence for <Ctrl><I>
>        Use the <ESC><Ctrl><J> key sequence for <Ctrl><J>
>
>        Use the <ESC><X><X> key sequence for <Alt><x>, where x is any letter
>        key, and X is the upper case of that key
>
>        Use the <ESC><R><ESC><r><ESC><R> key sequence for <Ctrl><Alt><Del>
>Configuring memory. Please wait...
>
>
>
>
>        Press the spacebar to pause...
>
>        KEY MAPPING FOR CONSOLE REDIRECTION:
>
>        Use the <ESC><0> key sequence for <F10>
>        Use the <ESC><!> key sequence for <F11>
>        Use the <ESC><@> key sequence for <F12>
>
>        Use the <ESC><Ctrl><M> key sequence for <Ctrl><M>
>        Use the <ESC><Ctrl><H> key sequence for <Ctrl><H>
>        Use the <ESC><Ctrl><I> key sequence for <Ctrl><I>
>        Use the <ESC><Ctrl><J> key sequence for <Ctrl><J>
>
>        Use the <ESC><X><X> key sequence for <Alt><x>, where x is any letter
>        key, and X is the upper case of that key
>
>        Use the <ESC><R><ESC><r><ESC><R> key sequence for <Ctrl><Alt><Del>
>                                                               F2 = System Setup
>Phoenix ROM BIOS PLUS Version 1.10 6.6.0                   F10 = System Services
>Copyright 1985-1988 Phoenix Technologies Ltd.            F11 = UEFI Boot Manager
>Copyright 1990-2012 Dell Inc.                                     F12 = PXE Boot
>All Rights Reserved
>
>Dell System PowerEdge T610
>www.dell.com
>
>
>
>Two 3.20 GHz Quad-core Processors, Bus Speed:6.40 GT/s, L2/L3 Cache:1 MB/12 MB
>System running at 3.20 GHz
>System Memory Size: 64.0 GB, System Memory Speed: 1333 MHz, Voltage: 1.5V
>
>
>Chelsio Unified Boot BIOS v1.0.0.68
>Copyright (C) 2003-2014 Chelsio Communications
>Press <Alt-C> to Configure T4/T5 Card(s). Press <Alt-S> to skip BIOS.
>
>Chelsio Unified Boot BIOS is Disabled. To Enable Boot BIOS,
>Please run Chelsio Unified Configuration Utility.
>
>
>PowerEdge Expandable RAID Controller BIOS
>Copyright(c) 2010 LSI Corporation
>F/WsInitializingtDeviceso100%uration Utility
>HA -0 (Bus 2 Dev 0) PERC H7 0 Integrated
>FW package: 12.10.7-0001
>
>1 Virtual Drive(s) found on the host adapter.
>
>1 Virtual Drive(s) handled by BIOS
>
>
>iDRAC6 Configuration Utility 1.60
>Copyright 2011 Dell Inc. All Rights Reserved
>
>iDRAC6 Firmware Revision version: 2.92.05
>Primary Backplane Firmware Revision 1.07
>
>
>-------------------------------
>      IPv6 Settings
>-------------------------------
> IPv6 Stack      : Disabled
> Address 1       : ::
> Default Gateway : ::
> -------------------------------
>      IPv4 Settings
> -------------------------------
> IPv4 Stack      : Enabled
> IP Address      : 192.168. 0 .120
> Subnet mask     : 255.255.255. 0
>Pressu<Ctrl-E>afor Remote8Access1Setup within 5 sec......
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>                       Initializing UEFI. Please wait...
>
>>> FreeBSD EFI boot block
>   Loader path: /boot/loader.efi
>
>   Initializing modules: ZFS UFS
>   Load Path: \EFI\BOOT\BOOTX64.EFI
>   Load Device: Acpi(PNP0A08,0x0)/Pci(0xA,0x0)/Pci(0x0,0x0)/Ctrl(0x0)/Scsi(0x0,)
>   BootCurrent: 0001
>   BootOrder: 0000 0001[*]
>   Probing 5 block devices...not supported
>not supported
>better
>not supported
>not supported
> done
>    ZFS found no pools
>    UFS found 1 partition
>
>Consoles: EFI console
>    Reading loader env vars from /efi/freebsd/loader.env
>Setting currdev to disk0p2:
>FreeBSD/amd64 EFI loader, Revision 1.1
>
>   Command line arguments: loader.efi
>   EFI version: 2.10
>   EFI Firmware: Dell Inc. (rev 6.1537)
>   Console: efi (0x20000000)
>   Load Path: HD(2,GPT,78D78785-748E-11EB-8BC4-002219BF8EC3,0x64028,0x41739C000)
>
>   Load Device: Acpi(PNP0A08,0x0)/Pci(0xA,0x0)/Pci(0x0,0x0)/Ctrl(0x0)/Scsi(0x0,0
>x0)/HD(2,GPT,78D78785-748E-11EB-8BC4-002219BF8EC3,0x64028,0x41739C000)
>   BootCurrent: 0001
>   BootOrder: 0000 0001[*]
>   BootInfo Path: Acpi(PNP0A08,0x0)/Pci(0xA,0x0)/Pci(0x0,0x0)/Ctrl(0x0)/Scsi(0x0
>,0x0)/HD(1,GPT,78CAEBF7-748E-11EB-8BC4-002219BF8EC3,0x28,0x64000)
>Ignoring Boot0001: Only one DP found
>Trying ESP: Acpi(PNP0A08,0x0)/Pci(0xA,0x0)/Pci(0x0,0x0)/Ctrl(0x0)/Scsi(0x0,0x0)/
>HD(2,GPT,78D78785-748E-11EB-8BC4-002219BF8EC3,0x64028,0x41739C000)
>Setting currdev to disk0p2:
>Loading /boot/defaults/loader.conf
>Loading /boot/defaults/loader.conf
>Loading /boot/device.hints
>Loading /boot/loader.conf
>Loading /boot/loader.conf.local
>\
>/  ______               ____   _____ _____
>  |  ____|             |  _ \ / ____|  __ \
>  | |___ _ __ ___  ___ | |_) | (___ | |  | |
>  |  ___| '__/ _ \/ _ \|  _ < \___ \| |  | |
>  | |   | | |  __/  __/| |_) |____) | |__| |
>  | |   | | |    |    ||     |      |      |
>  |_|   |_|  \___|\___||____/|_____/|_____/
>                                                 ```                        `
> ââââââââââââWelcome to FreeBSDâââââââââââââ    s` `.....---.......--.```   -/
> â                                         â    +o   .--`         /y:`      +.
> â  1. Boot Multi user [Enter]             â     yo`:.            :o      `+-
> â  2. Boot Single user                    â      y/               -/`   -o/
> â  3. Escape to loader prompt             â     .-                  ::/sy+:.
> â  4. Reboot                              â     /                     `--  /
> â  5. Cons: Dual (Video primary)          â    `:                          :`
> â                                         â    `:                          :`
> â  Options:                               â     /                          /
> â  6. Kernel: default/kernel (1 of 1)     â     .-                        -.
> â  7. Boot Options                        â      --                      -.
> â                                         â       `:`                  `:`
> â                                         â         .--             `--.
> âââââââââââââââââââââââââââââââââââââââââââ            .---.....----.
>
>Exiting menu!
>
>
>Type '?' for a list of commands, 'help' for more detailed help.
>OK lsdev
>cd devices:
>    cd0:    0 blocks (no media)
>disk devices:
>    disk0:    17578328064 X 512 blocks
>      disk0p1: EFI
>      disk0p2: FreeBSD UFS
>      disk0p3: FreeBSD swap
>http: (unknown)
>net devices:
>    net0:
>    net1:
>OK ls disk0p2:
>disk0p2:/
> d  .snap
> d  dev
> d  usr
> d  rescue
> l  sys
> d  proc
> d  root
> d  tmp
> d  mnt
> d  libexec
> d  var
> d  boot
>    .cshrc
> d  sbin
> d  etc
> d  net
> d  bin
>    .profile
> d  lib
>    COPYRIGHT
> d  media
>    entropy
>OK ls disk0p2:/boot/kernel/
>disk0p2:/boot/kernel/
>    wlan_amrr.ko
>    ng_pred1.ko
>    ads111x.ko
>    iwn2000fw.ko
>    acl_nfs4.ko
>    ng_async.ko
>    radeonkms.ko
>    iwn6000fw.ko
>    logo_saver.ko
>    uled.ko
>    mac_portacl.ko
>    alias_pptp.ko
>    vpd.ko
>    ng_sscop.ko
>    umass.ko
>    udl.ko
>    ipw_monitor.ko
>    ds13rtc.ko
>    io.ko
>    ng_bt3c.ko
>    snd_envy24.ko
>    snd_ds1.ko
>OK

Actions: View

Attachments on bug 253787: 222747 | 222748