diff --git a/net/Makefile b/net/Makefile
index 0782339d5c8a..6ba16fc1ac2b 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -161,7 +161,6 @@
     SUBDIR += fping
     SUBDIR += freebsd-uucp
     SUBDIR += freediameter
-    SUBDIR += freenet6
     SUBDIR += freeradius-client
     SUBDIR += freeradius3
     SUBDIR += freerdp
diff --git a/net/freenet6/Makefile b/net/freenet6/Makefile
deleted file mode 100644
index 20ec8ce19064..000000000000
--- a/net/freenet6/Makefile
+++ /dev/null
@@ -1,41 +0,0 @@
-# Created by: Edwin Groothuis <edwin@mavetju.org>
-# $FreeBSD$
-
-PORTNAME=	freenet6
-DISTVERSION=	6_0_1
-PORTREVISION=	2
-CATEGORIES=	net
-MASTER_SITES=	http://go6.net/4105/file.asp?file_id=166&
-DISTNAME=	tspc-${PORTVERSION}-src
-
-MAINTAINER=	ports@FreeBSD.org
-COMMENT=	Hexago Freenet6 Tunnel Setup Protocol Client - Free IPv6 tunnel
-
-LICENSE=	BSD3CLAUSE
-LICENSE_FILE=	${WRKSRC}/../CLIENT-LICENSE.TXT
-
-USES=		gmake ssl tar:tgz
-MAKE_ARGS=	target=freebsd CC="${CC}" CXX="${CXX}" \
-		installdir="${STAGEDIR}${PREFIX}" ETCDIR="${ETCDIR}"
-
-WRKSRC=		${WRKDIR}/gw6c-${DISTVERSION}/tspc-advanced
-
-USE_RC_SUBR=	freenet6
-SUB_FILES=	pkg-message
-
-MAKE_JOBS_UNSAFE=yes
-
-.include <bsd.port.pre.mk>
-
-.if ${SSL_DEFAULT} == base
-BROKEN_FreeBSD_12=	incomplete definition of type 'struct dsa_st'
-BROKEN_FreeBSD_13=	incomplete definition of type 'struct dsa_st'
-.endif
-
-post-fetch:
-	@if [ ! -f ${DISTDIR}/${DISTNAME}${EXTRACT_SUFX} ]; then \
-		${MV} ${DISTDIR}/file.asp*file_id*166* \
-			${DISTDIR}/${DISTNAME}${EXTRACT_SUFX}; \
-	fi
-
-.include <bsd.port.post.mk>
diff --git a/net/freenet6/distinfo b/net/freenet6/distinfo
deleted file mode 100644
index 4847c976833e..000000000000
--- a/net/freenet6/distinfo
+++ /dev/null
@@ -1,2 +0,0 @@
-SHA256 (tspc-6.0.1-src.tgz) = e6b345f11398026c8be17e0c26fc22632a6a1053bbf18b5303e514cf44b52c4a
-SIZE (tspc-6.0.1-src.tgz) = 2873856
diff --git a/net/freenet6/files/freenet6.in b/net/freenet6/files/freenet6.in
deleted file mode 100644
index 070ab843c53d..000000000000
--- a/net/freenet6/files/freenet6.in
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/sh
-#
-# $FreeBSD$
-#
-
-#
-# PROVIDE: freenet6
-# REQUIRE: NETWORKING netif named
-# BEFORE: ip6addrctl
-# KEYWORD: shutdown
-#
-
-#
-# Start or stop the IPv6 tunnel to Freenet6.net
-#
-# Add the following lines to /etc/rc.conf to enable freenet6:
-#
-# freenet6_enable="YES"
-# freenet6_flags="-f %%PREFIX%%/etc/gw6c.conf"
-#
-
-. /etc/rc.subr
-
-name=freenet6
-rcvar=freenet6_enable
-sig_stop="HUP"
-
-command=%%PREFIX%%/bin/gw6c
-required_files=%%PREFIX%%/etc/freenet6/gw6c.conf
-
-# set defaults
-
-freenet6_enable=${freenet6_enable:-"NO"}
-freenet6_flags=${freenet6_flags:-"-f %%PREFIX%%/etc/freenet6/gw6c.conf"}
-
-load_rc_config $name
-run_rc_command "$1"
diff --git a/net/freenet6/files/patch-Makefile b/net/freenet6/files/patch-Makefile
deleted file mode 100644
index 5b2733c35166..000000000000
--- a/net/freenet6/files/patch-Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
---- ./Makefile.orig	2009-05-19 12:51:11.000000000 -0400
-+++ ./Makefile	2014-06-27 04:03:52.000000000 -0400
-@@ -74,7 +74,7 @@
- #
- .PHONY: all platform-check check-gw6c-pal check-gw6c-config check-gw6c-messaging build-gw6c check-gw6c-install install clean cleanall
- 
--all: platform-check check-gw6c-pal check-gw6c-config check-gw6c-messaging build-gw6c
-+all: platform-check check-gw6c-config check-gw6c-messaging build-gw6c
- 
- 
- # This makefile target will check the platform.
-@@ -117,7 +117,7 @@
- # This makefile target will check and build the Gateway6 Client Configuration
- # Subsystem if it is not built.
- #
--check-gw6c-config:
-+check-gw6c-config:	check-gw6c-pal
- 	@[ -d ${GW6CCFG_DIR} ] || { \
- 	    echo "Gateway6 Client Configuration Subsystem module is not found. (${GW6CCFG_DIR})"; \
- 	    exit 1 ; \
-@@ -131,7 +131,7 @@
- # This makefile target will check and build the Gateway6 Client Messaging
- # Subsystem if it is not built.
- #
--check-gw6c-messaging:
-+check-gw6c-messaging:	check-gw6c-pal
- 	@[ -d ${GW6CMSG_DIR} ] || { \
- 	    echo "Gateway6 Client Messaging Subsystem module is not found. (${GW6CMSG_DIR})"; \
- 	    exit 1 ; \
-@@ -144,7 +144,7 @@
- 
- # This makefile target will build the Gateway6 Client.
- #
--build-gw6c:
-+build-gw6c:	check-gw6c-pal
- 	mkdir -p $(OBJS_DIR)
- 	mkdir -p $(BIN_DIR)
- 	@for dir in ${SUBDIRS}; do \
-@@ -167,17 +167,14 @@
- 	@mkdir -p $(INSTALL_DIR)
- 	@mkdir -p $(INSTALL_BIN)
- 	@mkdir -p $(INSTALL_MAN)
--	@mkdir -p $(INSTALL_TEMPL)
- 
- 	@for dir in ${SUBDIRS}; do \
- 	    $(MAKE) -C $$dir install || exit 1; \
- 	done
- 
--	@cp $(TARGET) $(INSTALL_BIN)
--	@cp $(BIN_DIR)/gw6c.conf.sample $(INSTALL_BIN)
--	@[ -f $(INSTALL_BIN)/gw6c.conf ] || { \
--	    cp $(INSTALL_BIN)/gw6c.conf.sample $(INSTALL_BIN)/gw6c.conf; \
--	}
-+	${BSD_INSTALL_PROGRAM} $(TARGET) $(INSTALL_BIN)
-+	@mkdir -p $(DESTDIR)$(ETCDIR)
-+	${BSD_INSTALL_DATA} $(BIN_DIR)/gw6c.conf.sample $(DESTDIR)$(ETCDIR)
- 
- 
- # This makefile target will clean the build tree of the Gateway6 Client.
diff --git a/net/freenet6/files/patch-conf__Makefile b/net/freenet6/files/patch-conf__Makefile
deleted file mode 100644
index 9c2efccfb25f..000000000000
--- a/net/freenet6/files/patch-conf__Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
---- ./conf/Makefile.orig	2009-05-19 12:50:14.000000000 -0400
-+++ ./conf/Makefile	2014-06-27 03:51:00.000000000 -0400
-@@ -32,7 +32,7 @@
- 	     -e "s+@ifname_v6udpv4@+$(PLATFORM_V6UDPV4)+" \
- 	     -e "s+@ifname_v6v4@+$(PLATFORM_V6V4)+" \
- 	     -e "s+@conf_template@+$(PLATFORM)+" \
--	     -e "s+@conf_gw6_dir@+$(INSTALL_DIR)+" \
-+	     -e "s+@conf_gw6_dir@+$(PREFIX)+" \
- 	     gw6c.conf.in > $(BIN_DIR)/gw6c.conf.sample
- 	@chmod 700 $(BIN_DIR)/gw6c.conf.sample
- 
diff --git a/net/freenet6/files/patch-src__lib__config.c b/net/freenet6/files/patch-src__lib__config.c
deleted file mode 100644
index cca41389a4e8..000000000000
--- a/net/freenet6/files/patch-src__lib__config.c
+++ /dev/null
@@ -1,11 +0,0 @@
---- src/lib/config.c.orig	2009-05-19 18:22:06.000000000 +0200
-+++ src/lib/config.c	2009-11-15 17:57:52.000000000 +0100
-@@ -264,7 +264,7 @@
- {
-   tConf CmdLine;
-   gw6c_status status = STATUS_SUCCESS_INIT;
--  const char* cszTemplDir = "template";
-+  const char* cszTemplDir = "bin";
- 
- 
-   // Hard-coded parameters. Not configurable anymore.
diff --git a/net/freenet6/files/patch-src__tsp__tsp_setup.c b/net/freenet6/files/patch-src__tsp__tsp_setup.c
deleted file mode 100644
index a948b5dbb1e7..000000000000
--- a/net/freenet6/files/patch-src__tsp__tsp_setup.c
+++ /dev/null
@@ -1,27 +0,0 @@
---- src/tsp/tsp_setup.c.orig	2009-11-15 20:06:20.000000000 +0100
-+++ src/tsp/tsp_setup.c	2009-11-15 20:07:10.000000000 +0100
-@@ -262,7 +262,7 @@
-   //
-   if( buffer[0] == 0x00 )
-   {
--    pal_snprintf( buffer, sizeof buffer, "%s%c%s.%s", ScriptDir, DirSeparator, pConfig->template, ScriptExtension);
-+    pal_snprintf( buffer, sizeof buffer, "%s%cgw6c-%s.%s", ScriptDir, DirSeparator, pConfig->template, ScriptExtension);
- 
-     f_test = fopen( buffer, "r" );
-     if( f_test == NULL )
-@@ -279,13 +279,13 @@
-     if( ScriptInterpretor != NULL )
-     {
-       pal_snprintf( buffer, sizeof buffer,
--               "%s \"%s%c%s.%s\"",
-+               "%s \"%s%cgw6c-%s.%s\"",
-                ScriptInterpretor, ScriptDir, DirSeparator, pConfig->template, ScriptExtension);
-     }
-     else
-     {
-       pal_snprintf( buffer, sizeof buffer,
--                "\"%s%c%s.%s\"",
-+                "\"%s%cgw6c-%s.%s\"",
-                 ScriptDir, DirSeparator, pConfig->template, ScriptExtension);
-     }
-   }
diff --git a/net/freenet6/files/patch-src_net_icmp__echo__engine.c b/net/freenet6/files/patch-src_net_icmp__echo__engine.c
deleted file mode 100644
index b9f4608a6fc7..000000000000
--- a/net/freenet6/files/patch-src_net_icmp__echo__engine.c
+++ /dev/null
@@ -1,11 +0,0 @@
---- src/net/icmp_echo_engine.c.orig	2017-06-16 09:08:10 UTC
-+++ src/net/icmp_echo_engine.c
-@@ -238,7 +238,7 @@ iee_ret_t IEE_init( void** pp_config, iee_mode_t eng_m
-   p_engine->clbk_recv = recv_clbk;
- 
-   // Initialize engine socket variables.
--  p_engine->icmp_echo_id = pal_getpid();
-+  p_engine->icmp_echo_id = pal_getpid() % 65536;
-   p_engine->icmp_saf = af;
-   switch( p_engine->icmp_saf )
-   {
diff --git a/net/freenet6/files/patch-template__Makefile b/net/freenet6/files/patch-template__Makefile
deleted file mode 100644
index 3a122fa9d7d7..000000000000
--- a/net/freenet6/files/patch-template__Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
---- ./template/Makefile.orig	2008-01-09 10:09:18.000000000 -0500
-+++ ./template/Makefile	2014-06-27 03:51:00.000000000 -0400
-@@ -17,8 +17,10 @@
- 
- install:
- 	@echo "Installing templates ..."
--	@for template_var in README $(PLATFORM).sh; do \
--            cp $${template_var} $(INSTALL_TEMPL)/$${template_var}; \
-+	@for template_var in $(PLATFORM).sh; do \
-+            cp $${template_var} $(INSTALL_BIN)/gw6c-$${template_var}; \
-         done
-+	@mkdir -p $(DESTDIR)$(ETCDIR)
-+	${BSD_INSTALL_DATA} README $(DESTDIR)$(ETCDIR)
- 
- clean: 
diff --git a/net/freenet6/files/patch-template_freebsd.sh b/net/freenet6/files/patch-template_freebsd.sh
deleted file mode 100644
index f74cd585ba22..000000000000
--- a/net/freenet6/files/patch-template_freebsd.sh
+++ /dev/null
@@ -1,11 +0,0 @@
---- template/freebsd.sh.orig	2017-06-16 09:11:57 UTC
-+++ template/freebsd.sh
-@@ -201,7 +201,7 @@ if [ X"${TSP_TUNNEL_MODE}" = X"v6v4" ] || [ X"${TSP_TU
-       fi
-       #
-       # Configured tunnel config (IPv6) 
--	
-+      Exec $ifconfig $TSP_TUNNEL_INTERFACE inet6 -ifdisabled
-       Exec $ifconfig $TSP_TUNNEL_INTERFACE inet6 $TSP_CLIENT_ADDRESS_IPV6 $TSP_SERVER_ADDRESS_IPV6 prefixlen $TSP_TUNNEL_PREFIXLEN alias
-       Exec $ifconfig $TSP_TUNNEL_INTERFACE mtu 1280
-       # 
diff --git a/net/freenet6/files/pkg-message.in b/net/freenet6/files/pkg-message.in
deleted file mode 100644
index eb3a58b7d298..000000000000
--- a/net/freenet6/files/pkg-message.in
+++ /dev/null
@@ -1,12 +0,0 @@
-[
-{ type: install
-  message: <<EOM
-- Check the values of %%PREFIX%%/etc/gw6c.conf. If you have registered at
-  the website, fill in your userid and password there.
-- Add 'freenet6_enable="YES"' to your /etc/rc.conf to make it start
-  automatically.
-- Run %%PREFIX%%/etc/rc.d/freenet6 to start the tunnel.
-- Try to ping a IPv6 host, for example: ping6 www.freebsd.org
-EOM
-}
-]
diff --git a/net/freenet6/pkg-descr b/net/freenet6/pkg-descr
deleted file mode 100644
index caf47d647f57..000000000000
--- a/net/freenet6/pkg-descr
+++ /dev/null
@@ -1,24 +0,0 @@
-Freenet6 is an IPv6 access service offered for free to the community.
-This service enables thousands of people from all over the world
-to experience the best solution for a smooth and incremental
-deployment of IPv6. Freenet6 users can get IPv6 connectivity from
-anywhere, including from behind any NAT device or from outside of
-their home network.
-
-On Freenet6, a single, permanent IPv6 address and a DNS name are
-assigned to each user, making their PC reachable from anywhere on
-the IPv6 internet. A full /48 prefix may also be assigned to a
-router, enabling the distribution of IPv6 connectivity to an entire
-network.  Freenet 6 - Get Connected For Free!
-
-Instead of a Web interface, which is usually offered by traditional
-tunnel brokers, Freenet6 uses an innovative model based on a
-client/server architecture. The Gateway6 Client is software that
-usually runs on a PC and that implements the Tunnel Setup Protocol
-(TSP). The Gateway6 Client is used to automatically negotiate a
-configured tunnel between a PC or router and the Freenet6 tunnel
-broker, making IPv6 easy to install and maintain. The Gateway6
-Client source code is licensed under the GPL. A commercial license
-is also available.
-
-WWW: http://www.go6.net/4105/freenet.asp
diff --git a/net/freenet6/pkg-plist b/net/freenet6/pkg-plist
deleted file mode 100644
index f2ba90acdc6c..000000000000
--- a/net/freenet6/pkg-plist
+++ /dev/null
@@ -1,6 +0,0 @@
-bin/gw6c
-bin/gw6c-freebsd.sh
-etc/freenet6/README
-@sample etc/freenet6/gw6c.conf.sample
-man/man5/gw6c.conf.5.gz
-man/man8/gw6c.8.gz