Attachment 223797 Details for Bug 254755 – dmesg output

dmesg output

dmesg-14-current.txt (text/plain), 15.21 KB, created by Gordon Bergling on 2021-04-04 06:57:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gordon Bergling

Created: 2021-04-04 06:57:37 UTC

Size: 15.21 KB

patch

obsolete

>---<<BOOT>>---
>GDB: debug ports: uart
>GDB: current port: uart
>KDB: debugger backends: ddb gdb
>KDB: current backend: ddb
>WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance
>Copyright (c) 1992-2021 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 14.0-CURRENT #63 main-n245769-5a18515b3143: Thu Apr  1 08:59:44 CEST 2021
>    root@tiny.0xfce3.net:/tank/nfs_public/tiny/obj/tank/nfs_public/tiny/src/arm64.aarch64/sys/GENERIC-TCP arm64
>FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
>WARNING: WITNESS option enabled, expect reduced performance.
>VT(efifb): resolution 1824x984
>module firmware already present!
>KLD file umodem.ko is missing dependencies
>real memory  = 4147933184 (3955 MB)
>avail memory = 4019040256 (3832 MB)
>Starting CPU 1 (1)
>Starting CPU 2 (2)
>Starting CPU 3 (3)
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>random: unblocking device.
>random: entropy device external interface
>MAP 39f38000 mode 2 pages 1
>MAP 39f3e000 mode 2 pages 2
>MAP 3b350000 mode 2 pages 16
>MAP fe100000 mode 0 pages 1
>WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
>kbd0 at kbdmux0
>WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0.
>ofwbus0: <Open Firmware Device Tree>
>simplebus0: <Flattened device tree simple bus> on ofwbus0
>ofw_clkbus0: <OFW clocks bus> on ofwbus0
>clk_fixed0: <Fixed clock> on ofw_clkbus0
>clk_fixed1: <Fixed clock> on ofw_clkbus0
>simplebus1: <Flattened device tree simple bus> on ofwbus0
>simplebus2: <Flattened device tree simple bus> on ofwbus0
>regfix0: <Fixed Regulator> on ofwbus0
>regfix1: <Fixed Regulator> on ofwbus0
>bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
>psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
>gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 46 on simplebus0
>gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
>gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 22,23 on simplebus0
>gpiobus0: <OFW GPIO bus> on gpio0
>gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
>gpiobus1: <GPIO bus> on gpio1
>mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on simplebus0
>gpioregulator0: <GPIO controlled regulator> on ofwbus0
>generic_timer0: <ARMv7 Generic Timer> irq 4,5,6,7 on ofwbus0
>Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
>Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
>usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
>bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 9,10,11,12,13,14,15,16,17,18,19 on simplebus0
>bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
>bcmrng0: <Broadcom BCM2835/BCM2838 RNG> mem 0x7e104000-0x7e10400f irq 20 on simplebus0
>gpioc0: <GPIO controller> on gpio0
>uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 24 on simplebus0
>uart0: console (115200,n,8,1)
>sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq 60 on simplebus0
>uma_zalloc_debug: zone "malloc-2048" with the following non-sleepable locks held:
>exclusive sleep mutex SD slot mtx (sdhci) r = 0 (0xffffa00000ed3438) locked @ /tank/nfs_public/tiny/src/sys/dev/sdhci/sdhci.c:617
>stack backtrace:
>#0 0xffff0000004d34f4 at witness_debugger+0x64
>#1 0xffff0000004d4678 at witness_warn+0x3e8
>#2 0xffff0000006f8878 at uma_zalloc_debug+0x2c
>#3 0xffff0000006f8280 at uma_zalloc_arg+0x2c
>#4 0xffff00000043afe0 at malloc+0xa0
>#5 0xffff00000000d3f0 at xpt_alloc_ccb+0x1c
>#6 0xffff0000000318a0 at mmccam_start_discovery+0x18
>#7 0xffff00000024d0ac at sdhci_card_task+0x110
>#8 0xffff0000007dab2c at bcm_sdhci_attach+0x41c
>#9 0xffff00000049ee98 at device_attach+0x400
>#10 0xffff00000049ea00 at device_probe_and_attach+0x7c
>#11 0xffff0000004a0be8 at bus_generic_new_pass+0xf8
>#12 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#13 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#14 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#15 0xffff00000049be44 at bus_set_pass+0x4c
>#16 0xffff0000003f1e08 at mi_startup+0x12c
>#17 0xffff0000000008a8 at virtdone+0x6c
>sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 61 on simplebus0
>uma_zalloc_debug: zone "malloc-2048" with the following non-sleepable locks held:
>exclusive sleep mutex SD slot mtx (sdhci) r = 0 (0xffffa00000ed3038) locked @ /tank/nfs_public/tiny/src/sys/dev/sdhci/sdhci.c:617
>stack backtrace:
>#0 0xffff0000004d34f4 at witness_debugger+0x64
>#1 0xffff0000004d4678 at witness_warn+0x3e8
>#2 0xffff0000006f8878 at uma_zalloc_debug+0x2c
>#3 0xffff0000006f8280 at uma_zalloc_arg+0x2c
>#4 0xffff00000043afe0 at malloc+0xa0
>#5 0xffff00000000d3f0 at xpt_alloc_ccb+0x1c
>#6 0xffff0000000318a0 at mmccam_start_discovery+0x18
>#7 0xffff00000024d0ac at sdhci_card_task+0x110
>#8 0xffff0000007dab2c at bcm_sdhci_attach+0x41c
>#9 0xffff00000049ee98 at device_attach+0x400
>#10 0xffff00000049ea00 at device_probe_and_attach+0x7c
>#11 0xffff0000004a0be8 at bus_generic_new_pass+0xf8
>#12 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#13 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#14 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#15 0xffff00000049be44 at bus_set_pass+0x4c
>#16 0xffff0000003f1e08 at mi_startup+0x12c
>#17 0xffff0000000008a8 at virtdone+0x6c
>gpioc1: <GPIO controller> on gpio1
>fb0: <BCM2835 VT framebuffer driver> on simplebus0
>fb0: keeping existing fb bpp of 32
>fbd0 on fb0
>WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
>VT: Replacing driver "efifb" with new "fb".
>fb0: 1824x984(1824x984@0,0) 32bpp
>fb0: fbswap: 1, pitch 7296, base 0x3e513000, screen_size 7237632
>pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0
>cpulist0: <Open Firmware CPU Group> on ofwbus0
>cpu0: <Open Firmware CPU> on cpulist0
>bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
>cpu1: <Open Firmware CPU> on cpulist0
>cpu2: <Open Firmware CPU> on cpulist0
>cpu3: <Open Firmware CPU> on cpulist0
>pcib0: <BCM2838-compatible PCI-express controller> mem 0x7d500000-0x7d50930f,0x7e00f300-0x7e00f31f irq 66,67 on simplebus2
>pcib0: hardware identifies as revision 0x304.
>pci0: <PCI bus> on pcib0
>pcib1: <PCI-PCI bridge> irq 77 at device 0.0 on pci0
>pcib0: Failed to translate resource 0-fffff type 3 for pcib1
>pcib1: failed to allocate initial prefetch window: 0-0xfffff
>pci1: <PCI bus> on pcib1
>bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 78 at device 0.0 on pci1
>bcm_xhci0: 32 bytes context size, 64-bit DMA
>usbus0 on bcm_xhci0
>genet0: <RPi4 Gigabit Ethernet> mem 0x7d580000-0x7d58ffff irq 68,69 on simplebus2
>genet0: GENET version 5.0 phy 0x0000
>miibus0: <MII bus> on genet0
>brgphy0: <BCM54213PE 1000BASE-T media interface> PHY 1 on miibus0
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
>genet0: Ethernet address: dc:a6:32:9d:64:c4
>gpioled0: <GPIO LEDs> on ofwbus0
>lock order reversal: (sleepable after non-sleepable)
> 1st 0xffff000000c20c30 LED mtx (LED mtx, sleep mutex) @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
> 2nd 0xffffa00000ed3c10 Raspberry Pi firmware gpio (Raspberry Pi firmware gpio, sx) @ /tank/nfs_public/tiny/src/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c:252
>lock order LED mtx -> Raspberry Pi firmware gpio attempted at:
>#0 0xffff0000004d31d4 at witness_checkorder+0xc50
>#1 0xffff00000046fa98 at _sx_xlock+0x7c
>#2 0xffff0000007e1448 at rpi_fw_gpio_pin_set+0xe8
>#3 0xffff0000001eb168 at led_create_state+0x158
>#4 0xffff0000001b852c at gpioled_attach+0x290
>#5 0xffff00000049ee98 at device_attach+0x400
>#6 0xffff00000049ea00 at device_probe_and_attach+0x7c
>#7 0xffff0000004a0be8 at bus_generic_new_pass+0xf8
>#8 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#9 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#10 0xffff00000049be44 at bus_set_pass+0x4c
>#11 0xffff0000003f1e08 at mi_startup+0x12c
>#12 0xffff0000000008a8 at virtdone+0x6c
>uma_zalloc_debug: zone "malloc-64" with the following non-sleepable locks held:
>exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c20c30) locked @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
>stack backtrace:
>#0 0xffff0000004d34f4 at witness_debugger+0x64
>#1 0xffff0000004d4678 at witness_warn+0x3e8
>#2 0xffff0000006f8878 at uma_zalloc_debug+0x2c
>#3 0xffff0000006f8280 at uma_zalloc_arg+0x2c
>#4 0xffff00000043afe0 at malloc+0xa0
>#5 0xffff0000007d66a4 at bcm2835_firmware_property+0x44
>#6 0xffff0000007e1460 at rpi_fw_gpio_pin_set+0x100
>#7 0xffff0000001eb168 at led_create_state+0x158
>#8 0xffff0000001b852c at gpioled_attach+0x290
>#9 0xffff00000049ee98 at device_attach+0x400
>#10 0xffff00000049ea00 at device_probe_and_attach+0x7c
>#11 0xffff0000004a0be8 at bus_generic_new_pass+0xf8
>#12 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#13 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#14 0xffff00000049be44 at bus_set_pass+0x4c
>#15 0xffff0000003f1e08 at mi_startup+0x12c
>#16 0xffff0000000008a8 at virtdone+0x6c
>uma_zalloc_debug: zone "malloc-16" with the following non-sleepable locks held:
>exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c20c30) locked @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
>stack backtrace:
>#0 0xffff0000004d34f4 at witness_debugger+0x64
>#1 0xffff0000004d4678 at witness_warn+0x3e8
>#2 0xffff0000006f8878 at uma_zalloc_debug+0x2c
>#3 0xffff0000006f8280 at uma_zalloc_arg+0x2c
>#4 0xffff00000043afe0 at malloc+0xa0
>#5 0xffff000000740d00 at bounce_bus_dmamem_alloc+0x50
>#6 0xffff0000007d917c at bcm2835_mbox_property+0xdc
>#7 0xffff0000007d66d8 at bcm2835_firmware_property+0x78
>#8 0xffff0000007e1460 at rpi_fw_gpio_pin_set+0x100
>#9 0xffff0000001eb168 at led_create_state+0x158
>#10 0xffff0000001b852c at gpioled_attach+0x290
>#11 0xffff00000049ee98 at device_attach+0x400
>#12 0xffff00000049ea00 at device_probe_and_attach+0x7c
>#13 0xffff0000004a0be8 at bus_generic_new_pass+0xf8
>#14 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#15 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#16 0xffff00000049be44 at bus_set_pass+0x4c
>#17 0xffff0000003f1e08 at mi_startup+0x12c
>uma_zalloc_debug: zone "malloc-128" with the following non-sleepable locks held:
>exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000c20c30) locked @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
>stack backtrace:
>#0 0xffff0000004d34f4 at witness_debugger+0x64
>#1 0xffff0000004d4678 at witness_warn+0x3e8
>#2 0xffff0000006f8878 at uma_zalloc_debug+0x2c
>#3 0xffff0000006f8280 at uma_zalloc_arg+0x2c
>#4 0xffff00000043afe0 at malloc+0xa0
>#5 0xffff000000740d48 at bounce_bus_dmamem_alloc+0x98
>#6 0xffff0000007d917c at bcm2835_mbox_property+0xdc
>#7 0xffff0000007d66d8 at bcm2835_firmware_property+0x78
>#8 0xffff0000007e1460 at rpi_fw_gpio_pin_set+0x100
>#9 0xffff0000001eb168 at led_create_state+0x158
>#10 0xffff0000001b852c at gpioled_attach+0x290
>#11 0xffff00000049ee98 at device_attach+0x400
>#12 0xffff00000049ea00 at device_probe_and_attach+0x7c
>#13 0xffff0000004a0be8 at bus_generic_new_pass+0xf8
>#14 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#15 0xffff0000004a0b98 at bus_generic_new_pass+0xa8
>#16 0xffff00000049be44 at bus_set_pass+0x4c
>#17 0xffff0000003f1e08 at mi_startup+0x12c
>armv8crypto0: CPU lacks AES instructions
>ossl0: <OpenSSL crypto>
>Timecounters tick every 1.000 msec
>[fib_algo] fib_module_register: attaching radix6_lockless to inet6
>[fib_algo] fib_module_register: attaching radix6 to inet6
>[fib_algo] fib_module_register: attaching bsearch4 to inet
>[fib_algo] fib_module_register: attaching radix4_lockless to inet
>[fib_algo] fib_module_register: attaching radix4 to inet
>Attempting to load tcp_bbr
>usbus0: 5.0Gbps Super Speed USB v3.0
>tcp_bbr is now available
>bcm2835_cpufreq0: ARM 600MHz, Core 200MHz, SDRAM 400MHz, Turbo OFF
>ugen0.1: <0x1106 XHCI root HUB> at usbus0
>uhub0 on usbus0
>uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>TCP Hpts created 4 swi interrupt threads and bound 0 to cpus
>Release APs...done
>CPU  0: ARM Cortex-A72 r0p3 affinity:  0
>Trying to mount root from ufs:/dev/ufs/rootfs [rw,noatime]...
>                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
>Root mount waiting for: Instruction Set Attributes 0 = <CRC32>
> CAM Instruction Set Attributes 1 = <>
> usbus0         Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
>
>         Processor Features 1 = <>
>      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
>      Memory Model Features 1 = <8bit VMID>
>      Memory Model Features 2 = <32bit CCIDX,48bit VA>
>             Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
>             Debug Features 1 = <>
>         Auxiliary Features 0 = <>
>         Auxiliary Features 1 = <>
>CPU  1: ARM Cortex-A72 r0p3 affinity:  1
>CPU  2: ARM Cortex-A72 r0p3 affinity:  2
>CPU  3: ARM Cortex-A72 r0p3 affinity:  3
>TCP_ratelimit: Is now initialized
>WARNING: WITNESS option enabled, expect reduced performance.
>sdda0 at sdhci_slot0 bus 0 scbus0 target 0 lun 0
>sdda0: Relative addr: 0000aaaa
>uhub0: 5 ports with 4 removable, self powered
>Card features: <Memory High-Capacity SD2.0-Conditions 1.8-Signaling>
>Card memory OCR: 40ff8000
>sdda0: Serial Number DBF21023
>sdda0: SDHC SC64G 8.0 SN DBF21023 MFG 05/2020 by 3 SD
>ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
>uhub1 on uhub0
>uhub1: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus0
>Root mount waiting for: usbus0
>uhub1: 4 ports with 4 removable, self powered
>ugen0.3: <HOLTEK USB Keyboard> at usbus0
>ukbd0 on uhub1
>ukbd0: <HOLTEK USB Keyboard, class 0/0, rev 2.00/4.01, addr 2> on usbus0
>kbd1 at ukbd0
>mountroot: waiting for device /dev/ufs/rootfs...
>WARNING: / was not properly dismounted
>Warning: no time-of-day clock registered, system time will not be set accurately
>Dual Console: Serial Primary, Video Secondary
>WARNING: / was not properly dismounted
>lo0: link state changed to UP
>genet0: link state changed to DOWN
>genet0: link state changed to UP
>pflog0: promiscuous mode enabled
>uhid0 on uhub1
>uhid0: <HOLTEK USB Keyboard, class 0/0, rev 2.00/4.01, addr 2> on usbus0
>Security policy loaded: MAC/ntpd (mac_ntpd)
>lock order reversal:
> 1st 0xffffa00009dd4070 ufs (ufs, lockmgr) @ /tank/nfs_public/tiny/src/sys/kern/vfs_mount.c:1071
> 2nd 0xffffa00009e0aaf0 devfs (devfs, lockmgr) @ /tank/nfs_public/tiny/src/sys/kern/vfs_mount.c:1083
>lock order devfs -> ufs established at:
>#0 0xffff0000004d29c8 at witness_checkorder+0x444
>#1 0xffff000000434d0c at lockmgr_lock_flags+0x1d8
>#2 0xffff0000006de530 at ffs_lock+0x64
>#3 0xffff00000055f704 at _vn_lock+0x54
>#4 0xffff00000053fe50 at vfs_domount+0xea4
>#5 0xffff00000053defc at vfs_donmount+0x2b4
>#6 0xffff0000005426d4 at kernel_mount+0x4c
>#7 0xffff000000544e70 at parse_mount+0x49c
>#8 0xffff0000005433b8 at vfs_mountroot+0x400
>#9 0xffff0000003f2df8 at start_init+0x24
>#10 0xffff00000041f760 at fork_exit+0x74
>#11 0xffff0000007669ec at fork_trampoline+0x14
>lock order ufs -> devfs attempted at:
>#0 0xffff0000004d31d4 at witness_checkorder+0xc50
>#1 0xffff000000436760 at lockmgr_xlock+0x50
>#2 0xffff00000055f704 at _vn_lock+0x54
>#3 0xffff00000053fe50 at vfs_domount+0xea4
>#4 0xffff00000053defc at vfs_donmount+0x2b4
>#5 0xffff00000053dc08 at sys_nmount+0x60
>#6 0xffff000000767648 at do_el0_sync+0x82c
>#7 0xffff00000074621c at handle_el0_sync+0x90

Actions: View

Attachments on bug 254755: 223797