Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr 9 04:04:45 UTC 2021 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/i386.i386/sys/GENERIC i386 FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) VT(vga): resolution 640x480 CPU: Quad-Core AMD Opteron(tm) Processor 2374 HE (2194.54-MHz 686-class CPU) Origin="AuthenticAMD" Id=0x100f42 Family=0x10 Model=0x4 Stepping=2 Features=0x178bfbff Features2=0x802009 AMD Features=0xee500800 AMD Features2=0x37ff SVM: (disabled in BIOS) NP,NRIP,NAsids=64 TSC: P-state invariant real memory = 4294967296 (4096 MB) avail memory = 4172570624 (3979 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. ioapic0: MADT APIC ID 4 != hw id 0 ioapic1: MADT APIC ID 5 != hw id 0 ioapic2: MADT APIC ID 6 != hw id 0 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 irqs 0-15 ioapic1 irqs 32-47 ioapic2 irqs 64-79 Launching APs: 3 2 1 Timecounter "TSC-low" frequency 1097271329 Hz quality 800 random: entropy device external interface [ath_hal] loaded WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd1 at kbdmux0 nexus0 vtvga0: cryptosoft0: aesni0: No AES or SHA support. acpi0: acpi0: Power Button (fixed) Firmware Error (ACPI): Could not resolve symbol [\_SB._OSC.CDW1], AE_NOT_FOUND (20201113/psargs-503) ACPI Error: Aborting method \_SB._OSC due to previous error (AE_NOT_FOUND) (20201113/psparse-689) apei0: on acpi0 cpu0: on acpi0 attimer0: port 0x40-0x5f irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: port 0x70-0x7f irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pcib2: at device 13.0 on pci1 pci2: on pcib2 atapci0: port 0xdcb0-0xdcb7,0xdca0-0xdca3,0xdcb8-0xdcbf,0xdca4-0xdca7,0xdce0-0xdcef mem 0xee2fe000-0xee2fffff irq 11 at device 14.0 on pci1 ata2: at channel 0 on atapci0 ata3: at channel 1 on atapci0 ata4: at channel 2 on atapci0 ata5: at channel 3 on atapci0 isab0: at device 2.2 on pci0 isa0: on isab0 ohci0: port 0xc000-0xc0ff mem 0xee0ed000-0xee0edfff irq 11 at device 3.0 on pci0 usbus0 on ohci0 usbus0: 12Mbps Full Speed USB v1.0 ohci1: port 0xc400-0xc4ff mem 0xee0ee000-0xee0eefff irq 11 at device 3.1 on pci0 usbus1 on ohci1 usbus1: 12Mbps Full Speed USB v1.0 ehci0: port 0xc800-0xc8ff mem 0xee0ef000-0xee0effff irq 11 at device 3.2 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 usbus2: 480Mbps High Speed USB v2.0 vgapci0: port 0xcc00-0xccff mem 0xe0000000-0xe7ffffff,0xee0f0000-0xee0fffff irq 39 at device 4.0 on pci0 vgapci0: Boot video device pcib3: irq 32 at device 7.0 on pci0 pci3: on pcib3 pcib4: irq 33 at device 8.0 on pci0 pci4: on pcib4 pcib5: irq 37 at device 9.0 on pci0 pci5: on pcib5 pcib6: irq 37 at device 0.0 on pci5 pci6: on pcib6 pcib7: irq 37 at device 1.0 on pci6 pci7: on pcib7 pcib8: at device 0.0 on pci7 pci8: on pcib8 bce0: mem 0xec000000-0xedffffff irq 37 at device 0.0 on pci8 miibus0: on bce0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce0: Using defaults for TSO: 65518/35/2048 bce0: Ethernet address: b8:ac:6f:15:32:44 bce0: ASIC (0x57081020); bce0: link state changed to DOWN Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (5.0.4); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (ipms 1.6.0) Coal (RX:6,6,18,18; TX:20,20,80,80) pcib9: irq 37 at device 2.0 on pci6 pci9: on pcib9 pcib10: at device 0.0 on pci9 pci10: on pcib10 bce1: mem 0xea000000-0xebffffff irq 37 at device 0.0 on pci10 miibus1: on bce1 brgphy1: PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce1: Using defaults for TSO: 65518/35/2048 bce1: Ethernet address: b8:ac:6f:15:32:46 bce1: ASIC (0x57081020); bce1: link state changed to DOWN Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (5.0.4); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (ipms 1.6.0) Coal (RX:6,6,18,18; TX:20,20,80,80) pcib11: irq 37 at device 3.0 on pci6 pci11: on pcib11 mfi0: port 0xec00-0xecff mem 0xe9f80000-0xe9fbffff,0xe9fc0000-0xe9ffffff irq 37 at device 0.0 on pci11 mfi0: Using MSI mfi0: Megaraid SAS driver Ver 4.23 mfi0: FW MaxCmds = 1008, limiting to 128 mfi0: Cannot allocate buffer DMA tag device_attach: mfi0 attach returned 12 pcib12: irq 35 at device 10.0 on pci0 pci12: on pcib12 pcib13: irq 36 at device 11.0 on pci0 pci13: on pcib13 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0uart0: console (9600,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 orm0: at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff pnpid ORM0000 on isa0 ata0: at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. ata1: at port 0x170-0x177,0x376 irq 15 on isa0 ata1: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. fdc0: No FDOUT register! ppc0: parallel port not found. hwpstate0: on cpu0 Timecounters tick every 1.000 msec ugen1.1: <(0x1166) OHCI root HUB> at usbus1 ugen0.1: <(0x1166) OHCI root HUB> at usbus0 ugen2.1: <(0x1166) EHCI root HUB> at usbus2 uhub0 on usbus1 uhub0: <(0x1166) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 Trying to mount root from cd9660:/dev/iso9660/13_0_RELEASE_I386_DVD [ro]... uhub1 on usbus2 uhub2 on usbus0 uhub2: <(0x1166) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 Root mount waiting for:uhub1: <(0x1166) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 Cannot reserve swap pctrie zone, reduce kern.maxswzone. CAM usbus0 usbus1 usbus2 uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered bce0: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state = 0x00002006) Root mount waiting for: CAM usbus2 uhub1: 4 ports with 4 removable, self powered Root mount waiting for: CAM usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer cd0 at ata3 bus 0 scbus1 target 0 lun 0 cd0: Removable CD-ROM SCSI device cd0: Serial Number 10050603142256 cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: 3861MB (1976912 2048 byte sectors) usb_alloc_device: set address 2 failed (USB_ERR_NOMEM, ignored) usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_NOMEM, ignored) usbd_ctrl_transfer_setup: could not setup default USB transfer Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer Root mount waiting for: usbus2 usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_NOMEM, ignored) usbd_ctrl_transfer_setup: could not setup default USB transfer Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer random: unblocking device. Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_NOMEM, ignored) Root mount waiting for: usbus2usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer Root mount waiting for:usbd_ctrl_transfer_setup: could not setup default USB transfer usbus2 usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_NOMEM, ignored) usbd_ctrl_transfer_setup: could not setup default USB transfer Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer Root mount waiting for:usbd_ctrl_transfer_setup: could not setup default USB transfer usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer Root mount waiting for: usbus2 usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_ctrl_transfer_setup: could not setup default USB transfer usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_NOMEM ugen2.2: at usbus2 (disconnected) uhub_reattach_port: could not allocate new device mountroot: waiting for device /dev/iso9660/13_0_RELEASE_I386_DVD... Dual Console: Video Primary, Serial Secondary ÿÿýýcõcõ[c[c