---<>--- Copyright (c) 2013-2019 The HardenedBSD Project. Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-RELEASE-p19-HBSD #0 f692db99f3c(stable/21.7)-dirty: Mon Aug 2 13:29:29 CEST 2021 root@sensey:/usr/obj/usr/src/amd64.amd64/sys/SMP amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(efifb): resolution 800x600 HardenedBSD: initialize and check features (__HardenedBSD_version 1200059 __FreeBSD_version 1201000). CPU: AMD RX-427BB with AMD Radeon(tm) R7 Graphics (2695.11-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x630f01 Family=0x15 Model=0x30 Stepping=1 Features=0x178bfbff Features2=0x3e98320b AMD Features=0x2e500800 AMD Features2=0xfebbfff,DBE,PTSC> Structured Extended Features=0x9 XSAVE Features=0x1 SVM: (disabled in BIOS) NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 7152578560 (6821 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-796) ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-55 on motherboard Launching APs: 3 2 1 Timecounter "TSC-low" frequency 1347553936 Hz quality 1000 wlan: mac acl policy registered random: entropy device external interface kbd1 at kbdmux0 module_register_init: MOD_LOAD (vesa, 0xffffffff812907f0, 0) error 19 000.000054 [4344] netmap_init netmap: loaded module [ath_hal] loaded nexus0 efirtc0: on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: on motherboard acpi0: on motherboard acpi0: Power Button (fixed) cpu0: on acpi0 attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: at device 0.2 (no driver attached) vgapci0: port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe07fffff,0xfeb00000-0xfeb3ffff at device 1.0 on pci0 vgapci0: Boot video device hdac0: mem 0xfeb64000-0xfeb67fff at device 1.1 on pci0 pcib1: at device 2.1 on pci0 pci1: on pcib1 pcib2: at device 0.0 on pci1 pci2: on pcib2 pcib3: at device 2.0 on pci2 pci3: on pcib3 em0: port 0xd020-0xd03f mem 0xfe920000-0xfe93ffff,0xfe880000-0xfe8fffff at device 0.0 on pci3 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: 00:24:81:81:8d:a1 em0: netmap queues/slots: TX 1/1024, RX 1/1024 em1: port 0xd000-0xd01f mem 0xfe900000-0xfe91ffff,0xfe800000-0xfe87ffff at device 0.1 on pci3 em1: Using 1024 TX descriptors and 1024 RX descriptors em1: Using an MSI interrupt em1: Ethernet address: 00:24:81:81:8d:a0 em1: netmap queues/slots: TX 1/1024, RX 1/1024 pcib4: at device 4.0 on pci2 pci4: on pcib4 em2: port 0xc020-0xc03f mem 0xfe720000-0xfe73ffff,0xfe680000-0xfe6fffff at device 0.0 on pci4 em2: Using 1024 TX descriptors and 1024 RX descriptors em2: Using an MSI interrupt em2: Ethernet address: 00:24:81:81:8d:a3 em2: netmap queues/slots: TX 1/1024, RX 1/1024 em3: port 0xc000-0xc01f mem 0xfe700000-0xfe71ffff,0xfe600000-0xfe67ffff at device 0.1 on pci4 em3: Using 1024 TX descriptors and 1024 RX descriptors em3: Using an MSI interrupt em3: Ethernet address: 00:24:81:81:8d:a2 em3: netmap queues/slots: TX 1/1024, RX 1/1024 pcib5: at device 3.2 on pci0 pci5: on pcib5 re0: port 0xe000-0xe0ff mem 0xfea04000-0xfea04fff,0xfea00000-0xfea03fff at device 0.0 on pci5 re0: Using Memory Mapping! re0: Using 1 MSI-X message re0: version:1.96.04 re0: Ethernet address: 7c:d3:0a:2e:85:91 This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. re0: Ethernet address: 7c:d3:0a:2e:85:91 xhci0: mem 0xfeb6a000-0xfeb6bfff at device 16.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Unable to map MSI-X table usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 xhci1: mem 0xfeb68000-0xfeb69fff at device 16.1 on pci0 xhci1: 32 bytes context size, 64-bit DMA xhci1: Unable to map MSI-X table usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 ahci0: port 0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f mem 0xfeb70000-0xfeb707ff at device 17.0 on pci0 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier supported ahcich0: at channel 0 on ahci0 ahcich1: at channel 1 on ahci0 ahcich2: at channel 2 on ahci0 ahcich3: at channel 3 on ahci0 ohci0: mem 0xfeb6f000-0xfeb6ffff at device 18.0 on pci0 usbus2 on ohci0 usbus2: 12Mbps Full Speed USB v1.0 ehci0: mem 0xfeb6e000-0xfeb6e0ff at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 ohci1: mem 0xfeb6d000-0xfeb6dfff at device 19.0 on pci0 usbus4 on ohci1 usbus4: 12Mbps Full Speed USB v1.0 ehci1: mem 0xfeb6c000-0xfeb6c0ff at device 19.2 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 usbus5: 480Mbps High Speed USB v2.0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f at device 20.1 on pci0 ata0: at channel 0 on atapci0 ata1: at channel 1 on atapci0 hdac1: mem 0xfeb60000-0xfeb63fff at device 20.2 on pci0 isab0: at device 20.3 on pci0 isa0: on isab0 pcib6: at device 20.4 on pci0 pci6: on pcib6 acpi_button0: on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) ppc0: port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 hwpstate0: on cpu0 Timecounters tick every 1.000 msec hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 pcm0: at nid 3 on hdaa0 pcm1: at nid 5 on hdaa0 pcm2: at nid 7 on hdaa0 pcm3: at nid 9 on hdaa0 hdacc1: at cad 0 on hdac1 hdaa1: at nid 1 on hdacc1 pcm4: at nid 20,33 and 24,27 on hdaa1 pcm5: at nid 26 on hdaa1 ugen3.1: at usbus3 ugen4.1: at usbus4 ugen0.1: <0x1022 XHCI root HUB> at usbus0 ugen5.1: at usbus5 uhub0: on usbus3 uhub2: on usbus5 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <0x1022 XHCI root HUB> at usbus1 ugen2.1: at usbus2 uhub3: on usbus4 uhub4: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 uhub5: on usbus2 uhub3: 5 ports with 5 removable, self powered uhub5: 5 ports with 5 removable, self powered uhub1: 4 ports with 4 removable, self powered uhub4: 4 ports with 4 removable, self powered uhub0: 5 ports with 5 removable, self powered uhub2: 5 ports with 5 removable, self powered ugen4.2: at usbus4 ukbd0 on uhub3 ukbd0: on usbus4 kbd2 at ukbd0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ACS-2 ATA SATA 3.x device ada0: Serial Number 171131405480 ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes) ada0: Command Queueing enabled ada0: 30533MB (62533296 512 byte sectors) Trying to mount root from ufs:/dev/gpt/rootfs [rw]... intsmb0: at device 20.0 on pci0 smbus0: on intsmb0 uhid0 on uhub3 uhid0: on usbus4 lo0: link state changed to UP aesni0: on motherboard re0: link state changed to UP pflog0: permanently promiscuous mode enabled re0: link state changed to DOWN em0: link state changed to UP em0: link state changed to DOWN em0: link state changed to UP