Attachment 228243 Details for Bug 258776 – kernel.log (verbose)

kernel.log (verbose)

kernel.verbose.log (text/plain), 45.27 KB, created by Yann Droneaud on 2021-09-29 10:24:15 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Yann Droneaud

Created: 2021-09-29 10:24:15 UTC

Size: 45.27 KB

patch

obsolete

>---<<BOOT>>---
>APIC: Using the MADT enumerator.
>Copyright (c) 1992-2021 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 13.0-RELEASE #0 releng/13.0-n244733-ea31abc261f: Fri Apr  9 04:24:09 UTC 2021
>    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
>FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
>PPIM 0: PA=0xb8000, VA=0xffffffff82310000, size=0x8000, mode=0
>pmap: large map 8 PML4 slots (4096 GB)
>VT(vga): text 80x25
>Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff82117518.
>Calibrating TSC clock ... TSC clock: 3393632072 Hz
>CPU: AMD EPYC-Milan Processor (3393.63-MHz K8-class CPU)
>  Origin="AuthenticAMD"  Id=0xa00f11  Family=0x19  Model=0x1  Stepping=1
>  Features=0x783fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2>
>  Features2=0xfff83203<SSE3,PCLMULQDQ,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
>  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
>  AMD Features2=0xc003f7<LAHF,CMP,SVM,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,Topology,PCXC>
>  Structured Extended Features=0x219c07ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
>  Structured Extended Features2=0x40060c<UMIP,PKU,VAES,VPCLMULQDQ,RDPID>
>  Structured Extended Features3=0xac000010<FSRM,IBPB,STIBP,ARCH_CAP,SSBD>
>  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
>  IA32_ARCH_CAPS=0x69<RDCL_NO,SKIP_L1DFL_VME,MDS_NO>
>  AMD Extended Feature Extensions ID EBX=0x300d205<CLZERO,XSaveErPtr,WBNOINVD,IBPB,IBRS,STIBP,SSBD,VIRT_SSBD>
>  SVM: Features=0x9<NP,NRIPS>
>Revision=1, ASIDs=16
>L1 2MB data TLB: 255 entries, 1-way associative
>L1 2MB instruction TLB: 255 entries, 1-way associative
>L1 4KB data TLB: 255 entries, 1-way associative
>L1 4KB instruction TLB: 255 entries, 1-way associative
>L1 data cache: 32 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
>L1 instruction cache: 32 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
>L2 2MB unified TLB: 0 entries, disabled/not present
>L2 4KB data TLB: 512 entries, 4-way associative
>L2 4KB instruction TLB: 512 entries, 4-way associative
>L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
>Hypervisor: Origin = "KVMKVMKVM"
>real memory  = 1073741824 (1024 MB)
>Physical memory chunk(s):
>0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
>0x0000000000104000 - 0x00000000001fffff, 1032192 bytes (252 pages)
>0x0000000002301000 - 0x000000003e3ebfff, 1007595520 bytes (245995 pages)
>0x000000003fe00000 - 0x000000003ffb7fff, 1802240 bytes (440 pages)
>avail memory = 1004064768 (957 MB)
>MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
>SMP: Added CPU 0 (AP)
>Event timer "LAPIC" quality 600
>ACPI APIC Table: <BOCHS  BXPCAPIC>
>APIC: CPU 0 has ACPI ID 0
>Pentium Pro MTRR support enabled
>x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
>x86bios: SSEG 0x001000-0x001fff at 0xfffffe000214b000
>x86bios: EBDA 0x09f000-0x09ffff at 0xfffff8000009f000
>x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
>random: registering fast source Intel Secure Key RNG
>random: fast provider: "Intel Secure Key RNG"
>random: no preloaded entropy cache
>arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
>VIMAGE (virtualized network stack) enabled
>hostuuid: using 00000000-0000-0000-0000-000000000000
>ULE: setup cpu 0
>ACPI: RSDP 0x00000000000F5B00 000014 (v00 BOCHS )
>ACPI: RSDT 0x000000003FFE205A 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
>ACPI: FACP 0x000000003FFE1E8A 0000F4 (v03 BOCHS  BXPCFACP 00000001 BXPC 00000001)
>ACPI: DSDT 0x000000003FFE0040 001E4A (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
>ACPI: FACS 0x000000003FFE0000 000040
>ACPI: APIC 0x000000003FFE1F7E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
>ACPI: MCFG 0x000000003FFE1FF6 00003C (v01 BOCHS  BXPCMCFG 00000001 BXPC 00000001)
>ACPI: WAET 0x000000003FFE2032 000028 (v01 BOCHS  BXPCWAET 00000001 BXPC 00000001)
>MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000
>ioapic0: ver 0x11 maxredir 0x17
>ioapic0: Routing external 8259A's -> intpin 0
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Interrupt override: source 5, irq 5
>ioapic0: intpin 5 trigger: level
>MADT: Interrupt override: source 9, irq 9
>ioapic0: intpin 9 trigger: level
>MADT: Interrupt override: source 10, irq 10
>ioapic0: intpin 10 trigger: level
>MADT: Interrupt override: source 11, irq 11
>ioapic0: intpin 11 trigger: level
>lapic: Routing NMI -> LINT1
>lapic: LINT1 trigger: edge
>lapic: LINT1 polarity: high
>ioapic0 <Version 1.1> irqs 0-23
>lapic: Divisor 2, Frequency 500010663 Hz
>cpu0 BSP:
>     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000001 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>TSC timecounter discards lower 1 bit(s)
>Timecounter "TSC-low" frequency 1696816036 Hz quality 800
>KTLS: Initialized 1 threads
>snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
>feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
>random: entropy device external interface
>wlan: <802.11 Link Layer>
>EFI systbl not available
>000.000018 [4354] netmap_init               netmap: loaded module
>null: <full device, null device, zero device>
>[ath_hal] loaded
>crypto: <crypto core>
>tcp_log: tcp_log device
>io: <I/O>
>kbd: new array size 4
>WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
>kbd1 at kbdmux0
>mem: <memory>
>mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
>nexus0
>vtvga0: <VT VGA driver>
>cryptosoft0: <software crypto>
>crypto: assign cryptosoft0 driver id 0, flags 0x6000000
>aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
>crypto: assign aesni0 driver id 1, flags 0xe000000
>acpi0: <BOCHS BXPCRSDT>
>ACPI: 1 ACPI AML tables successfully acquired and loaded
>PCIe: Memory Mapped configuration base @ 0xb0000000
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>acpi0: Power Button (fixed)
>acpi0: wakeup code va 0xfffffe0002259000 pa 0x9e000
>cpu0: <ACPI CPU> on acpi0
>cpu0: switching to generic Cx mode
>atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
>Event timer "RTC" frequency 32768 Hz quality 0
>ACPI timer: 1/1 1/35 1/8 1/2 1/1 1/3 1/9 1/19 1/1 1/8 -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  5 10 11
>  Validation          0   10   N     0  5 10 11
>  After Disable       0  255   N     0  5 10 11
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  5 10 11
>  Validation          0   10   N     0  5 10 11
>  After Disable       0  255   N     0  5 10 11
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  5 10 11
>  Validation          0   11   N     0  5 10 11
>  After Disable       0  255   N     0  5 10 11
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  5 10 11
>  Validation          0   11   N     0  5 10 11
>  After Disable       0  255   N     0  5 10 11
>pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  5 10 11
>  Validation          0   10   N     0  5 10 11
>  After Disable       0  255   N     0  5 10 11
>pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  5 10 11
>  Validation          0   10   N     0  5 10 11
>  After Disable       0  255   N     0  5 10 11
>pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  5 10 11
>  Validation          0   11   N     0  5 10 11
>  After Disable       0  255   N     0  5 10 11
>pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  5 10 11
>  Validation          0   11   N     0  5 10 11
>  After Disable       0  255   N     0  5 10 11
>pci_link8:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   16   N     0  16
>  Validation          0   16   N     0  16
>  After Disable       0  255   N     0  16
>pci_link9:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   17   N     0  17
>  Validation          0   17   N     0  17
>  After Disable       0  255   N     0  17
>pci_link10:       Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   18   N     0  18
>  Validation          0   18   N     0  18
>  After Disable       0  255   N     0  18
>pci_link11:       Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   19   N     0  19
>  Validation          0   19   N     0  19
>  After Disable       0  255   N     0  19
>pci_link12:       Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   20   N     0  20
>  Validation          0   20   N     0  20
>  After Disable       0  255   N     0  20
>pci_link13:       Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   21   N     0  21
>  Validation          0   21   N     0  21
>  After Disable       0  255   N     0  21
>pci_link14:       Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   22   N     0  22
>  Validation          0   22   N     0  22
>  After Disable       0  255   N     0  22
>pci_link15:       Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   23   N     0  23
>  Validation          0   23   N     0  23
>  After Disable       0  255   N     0  23
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pcib0: decoding 5 range 0-0xff
>pcib0: decoding 4 range 0-0xcf7
>pcib0: decoding 4 range 0xd00-0xffff
>pcib0: decoding 3 range 0xa0000-0xbffff
>pcib0: decoding 3 range 0x40000000-0xafffffff
>pcib0: decoding 3 range 0xc0000000-0xfebfffff
>pcib0: decoding 3 range 0x100000000-0x8ffffffff
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x8086, dev=0x29c0, revid=0x00
>	domain=0, bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0103, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1b36, dev=0x0100, revid=0x05
>	domain=0, bus=0, slot=1, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0103, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	map[10]: type Memory, range 32, base 0xf4000000, size 26, enabled
>pcib0: allocated type 3 (0xf4000000-0xf7ffffff) for rid 10 of pci0:0:1:0
>	map[14]: type Memory, range 32, base 0xf8000000, size 26, enabled
>pcib0: allocated type 3 (0xf8000000-0xfbffffff) for rid 14 of pci0:0:1:0
>	map[18]: type Memory, range 32, base 0xfce10000, size 13, enabled
>pcib0: allocated type 3 (0xfce10000-0xfce11fff) for rid 18 of pci0:0:1:0
>	map[1c]: type I/O Port, range 32, base 0xc040, size  5, enabled
>pcib0: allocated type 4 (0xc040-0xc05f) for rid 1c of pci0:0:1:0
>pcib0: matched entry for 0.1.INTA (src \_SB_.GSIF:0)
>ioapic0: Changing polarity for pin 21 to high
>pcib0: slot 1 INTA routed to irq 21 via \_SB_.GSIF
>found->	vendor=0x1b36, dev=0x000c, revid=0x00
>	domain=0, bus=0, slot=2, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0103, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	MSI-X supports 1 message in map 0x10
>	map[10]: type Memory, range 32, base 0xfce12000, size 12, enabled
>pcib0: allocated type 3 (0xfce12000-0xfce12fff) for rid 10 of pci0:0:2:0
>pcib0: matched entry for 0.2.INTA (src \_SB_.GSIG:0)
>ioapic0: Changing polarity for pin 22 to high
>pcib0: slot 2 INTA routed to irq 22 via \_SB_.GSIG
>	secbus=1, subbus=2
>found->	vendor=0x1b36, dev=0x000c, revid=0x00
>	domain=0, bus=0, slot=2, func=1
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0103, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	MSI-X supports 1 message in map 0x10
>	map[10]: type Memory, range 32, base 0xfce13000, size 12, enabled
>pcib0: allocated type 3 (0xfce13000-0xfce13fff) for rid 10 of pci0:0:2:1
>pcib0: matched entry for 0.2.INTA (src \_SB_.GSIG:0)
>pcib0: slot 2 INTA routed to irq 22 via \_SB_.GSIG
>	secbus=3, subbus=3
>found->	vendor=0x1b36, dev=0x000c, revid=0x00
>	domain=0, bus=0, slot=2, func=2
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0103, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	MSI-X supports 1 message in map 0x10
>	map[10]: type Memory, range 32, base 0xfce14000, size 12, enabled
>pcib0: allocated type 3 (0xfce14000-0xfce14fff) for rid 10 of pci0:0:2:2
>pcib0: matched entry for 0.2.INTA (src \_SB_.GSIG:0)
>pcib0: slot 2 INTA routed to irq 22 via \_SB_.GSIG
>	secbus=4, subbus=4
>found->	vendor=0x1b36, dev=0x000c, revid=0x00
>	domain=0, bus=0, slot=2, func=3
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0103, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	MSI-X supports 1 message in map 0x10
>	map[10]: type Memory, range 32, base 0xfce15000, size 12, enabled
>pcib0: allocated type 3 (0xfce15000-0xfce15fff) for rid 10 of pci0:0:2:3
>pcib0: matched entry for 0.2.INTA (src \_SB_.GSIG:0)
>pcib0: slot 2 INTA routed to irq 22 via \_SB_.GSIG
>	secbus=5, subbus=5
>found->	vendor=0x1b36, dev=0x000c, revid=0x00
>	domain=0, bus=0, slot=2, func=4
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0103, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	MSI-X supports 1 message in map 0x10
>	map[10]: type Memory, range 32, base 0xfce16000, size 12, enabled
>pcib0: allocated type 3 (0xfce16000-0xfce16fff) for rid 10 of pci0:0:2:4
>pcib0: matched entry for 0.2.INTA (src \_SB_.GSIG:0)
>pcib0: slot 2 INTA routed to irq 22 via \_SB_.GSIG
>	secbus=6, subbus=6
>found->	vendor=0x1b36, dev=0x000c, revid=0x00
>	domain=0, bus=0, slot=2, func=5
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0103, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	MSI-X supports 1 message in map 0x10
>	map[10]: type Memory, range 32, base 0xfce17000, size 12, enabled
>pcib0: allocated type 3 (0xfce17000-0xfce17fff) for rid 10 of pci0:0:2:5
>pcib0: matched entry for 0.2.INTA (src \_SB_.GSIG:0)
>pcib0: slot 2 INTA routed to irq 22 via \_SB_.GSIG
>	secbus=7, subbus=7
>found->	vendor=0x8086, dev=0x2934, revid=0x03
>	domain=0, bus=0, slot=29, func=0
>	class=0c-03-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0107, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	map[20]: type I/O Port, range 32, base 0xc060, size  5, enabled
>pcib0: allocated type 4 (0xc060-0xc07f) for rid 20 of pci0:0:29:0
>pcib0: matched entry for 0.29.INTA (src \_SB_.GSIA:0)
>ioapic0: Changing polarity for pin 16 to high
>pcib0: slot 29 INTA routed to irq 16 via \_SB_.GSIA
>found->	vendor=0x8086, dev=0x2935, revid=0x03
>	domain=0, bus=0, slot=29, func=1
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0107, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=10
>	map[20]: type I/O Port, range 32, base 0xc080, size  5, enabled
>pcib0: allocated type 4 (0xc080-0xc09f) for rid 20 of pci0:0:29:1
>pcib0: matched entry for 0.29.INTB (src \_SB_.GSIB:0)
>ioapic0: Changing polarity for pin 17 to high
>pcib0: slot 29 INTB routed to irq 17 via \_SB_.GSIB
>found->	vendor=0x8086, dev=0x2936, revid=0x03
>	domain=0, bus=0, slot=29, func=2
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0107, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=11
>	map[20]: type I/O Port, range 32, base 0xc0a0, size  5, enabled
>pcib0: allocated type 4 (0xc0a0-0xc0bf) for rid 20 of pci0:0:29:2
>pcib0: matched entry for 0.29.INTC (src \_SB_.GSIC:0)
>ioapic0: Changing polarity for pin 18 to high
>pcib0: slot 29 INTC routed to irq 18 via \_SB_.GSIC
>found->	vendor=0x8086, dev=0x293a, revid=0x03
>	domain=0, bus=0, slot=29, func=7
>	class=0c-03-20, hdrtype=0x00, mfdev=0
>	cmdreg=0x0107, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=d, irq=11
>	map[10]: type Memory, range 32, base 0xfce18000, size 12, enabled
>pcib0: allocated type 3 (0xfce18000-0xfce18fff) for rid 10 of pci0:0:29:7
>pcib0: matched entry for 0.29.INTD (src \_SB_.GSID:0)
>ioapic0: Changing polarity for pin 19 to high
>pcib0: slot 29 INTD routed to irq 19 via \_SB_.GSID
>found->	vendor=0x8086, dev=0x2918, revid=0x02
>	domain=0, bus=0, slot=31, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0103, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x2922, revid=0x02
>	domain=0, bus=0, slot=31, func=2
>	class=01-06-01, hdrtype=0x00, mfdev=1
>	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	MSI supports 1 message, 64 bit
>	map[20]: type I/O Port, range 32, base 0xc0c0, size  5, enabled
>pcib0: allocated type 4 (0xc0c0-0xc0df) for rid 20 of pci0:0:31:2
>	map[24]: type Memory, range 32, base 0xfce19000, size 12, enabled
>pcib0: allocated type 3 (0xfce19000-0xfce19fff) for rid 24 of pci0:0:31:2
>pcib0: matched entry for 0.31.INTA (src \_SB_.GSIA:0)
>pcib0: slot 31 INTA routed to irq 16 via \_SB_.GSIA
>found->	vendor=0x8086, dev=0x2930, revid=0x02
>	domain=0, bus=0, slot=31, func=3
>	class=0c-05-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0103, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	map[20]: type I/O Port, range 32, base 0x700, size  6, enabled
>pcib0: allocated type 4 (0x700-0x73f) for rid 20 of pci0:0:31:3
>pcib0: matched entry for 0.31.INTA (src \_SB_.GSIA:0)
>pcib0: slot 31 INTA routed to irq 16 via \_SB_.GSIA
>vgapci0: <VGA-compatible display> port 0xc040-0xc05f mem 0xf4000000-0xf7ffffff,0xf8000000-0xfbffffff,0xfce10000-0xfce11fff irq 21 at device 1.0 on pci0
>vgapci0: Boot video device
>pcib1: <ACPI PCI-PCI bridge> mem 0xfce12000-0xfce12fff irq 22 at device 2.0 on pci0
>pcib0: allocated type 3 (0xfc000000-0xfc3fffff) for rid 20 of pcib1
>pcib0: allocated type 3 (0xfea00000-0xfebfffff) for rid 24 of pcib1
>ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 50
>pcib1: HotPlug command: 01c0 -> 19fb
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   2
>pcib1:   memory decode     0xfc000000-0xfc3fffff
>pcib1:   prefetched decode 0xfea00000-0xfebfffff
>pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.S10_ - AE_NOT_FOUND
>pci1: <ACPI PCI bus> on pcib1
>pcib1: allocated bus range (1-1) for rid 0 of pci1
>pci1: domain=0, physical bus=1
>found->	vendor=0x1b36, dev=0x000e, revid=0x00
>	domain=0, bus=1, slot=0, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0103, statreg=0x00b0, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit, vector masks
>	map[10]: type Memory, range 64, base 0xfc200000, size  8, enabled
>pcib1: allocated memory range (0xfc200000-0xfc2000ff) for rid 10 of pci0:1:0:0
>pcib0: matched entry for 0.2.INTA (src \_SB_.GSIG:0)
>pcib0: slot 2 INTA routed to irq 22 via \_SB_.GSIG
>pcib1: slot 0 INTA is routed to irq 22
>	secbus=2, subbus=2
>pcib1: allocated bus range (2-2) for rid 0 of pci0:1:0:0
>pcib2: <PCI-PCI bridge> mem 0xfc200000-0xfc2000ff irq 22 at device 0.0 on pci1
>pcib1: allocated memory range (0xfc000000-0xfc1fffff) for rid 20 of pcib2
>pcib2:   domain            0
>pcib2:   secondary bus     2
>pcib2:   subordinate bus   2
>pcib2:   memory decode     0xfc000000-0xfc1fffff
>pci2: <PCI bus> on pcib2
>pcib2: allocated bus range (2-2) for rid 0 of pci2
>pci2: domain=0, physical bus=2
>found->	vendor=0x8086, dev=0x2668, revid=0x01
>	domain=0, bus=2, slot=1, func=0
>	class=04-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0103, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 32, base 0xfc000000, size 14, enabled
>pcib2: allocated memory range (0xfc000000-0xfc003fff) for rid 10 of pci0:2:1:0
>pcib0: matched entry for 0.2.INTB (src \_SB_.GSIH:0)
>ioapic0: Changing polarity for pin 23 to high
>pcib0: slot 2 INTB routed to irq 23 via \_SB_.GSIH
>pcib1: slot 0 INTB is routed to irq 23
>pcib2: slot 1 INTA is routed to irq 23
>hdac0: <Intel 82801F HDA Controller> mem 0xfc000000-0xfc003fff irq 23 at device 1.0 on pci2
>hdac0: PCI card vendor: 0x1af4, device: 0x1100
>hdac0: HDA Driver Revision: 20120126_0002
>hdac0: Config options: on=0x00000000 off=0x00000000
>hdac0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 24 to local APIC 0 vector 51
>hdac0: using IRQ 24 for MSI
>hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
>pcib3: <PCI-PCI bridge> mem 0xfce13000-0xfce13fff irq 22 at device 2.1 on pci0
>pcib0: allocated type 3 (0xfcc00000-0xfcdfffff) for rid 20 of pcib3
>pcib0: allocated type 3 (0xfe800000-0xfe9fffff) for rid 24 of pcib3
>pcib3: HotPlug command: 01c0 -> 19fb
>pcib3:   domain            0
>pcib3:   secondary bus     3
>pcib3:   subordinate bus   3
>pcib3:   memory decode     0xfcc00000-0xfcdfffff
>pcib3:   prefetched decode 0xfe800000-0xfe9fffff
>pci3: <PCI bus> on pcib3
>pcib3: allocated bus range (3-3) for rid 0 of pci3
>pci3: domain=0, physical bus=3
>found->	vendor=0x1af4, dev=0x1041, revid=0x01
>	domain=0, bus=3, slot=0, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0103, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI-X supports 3 messages in map 0x14
>	map[14]: type Memory, range 32, base 0xfcc80000, size 12, enabled
>pcib3: allocated memory range (0xfcc80000-0xfcc80fff) for rid 14 of pci0:3:0:0
>	map[20]: type Prefetchable Memory, range 64, base 0xfe800000, size 14, enabled
>pcib3: allocated prefetch range (0xfe800000-0xfe803fff) for rid 20 of pci0:3:0:0
>pcib0: matched entry for 0.2.INTA (src \_SB_.GSIG:0)
>pcib0: slot 2 INTA routed to irq 22 via \_SB_.GSIG
>pcib3: slot 0 INTA is routed to irq 22
>virtio_pci0: <VirtIO PCI (modern) Network adapter> mem 0xfcc80000-0xfcc80fff,0xfe800000-0xfe803fff irq 22 at device 0.0 on pci3
>vtnet0: <VirtIO Networking Adapter> on virtio_pci0
>virtio_pci0: host features: 0x130bf8024 <Version1,RingEventIdx,RingIndirectDesc,CtrlMacAddr,GuestAnnounce,CtrlRxModeExtra,CtrlVLANFilter,CtrlRxMode,CtrlVq,Status,MrgRxBuf,MAC,CtrlRxOffloads>
>virtio_pci0: negotiated features: 0x1308f8024 <Version1,RingEventIdx,RingIndirectDesc,CtrlMacAddr,CtrlVLANFilter,CtrlRxMode,CtrlVq,Status,MrgRxBuf,MAC,CtrlRxOffloads>
>vtnet0: bpf attached
>vtnet0: Ethernet address: 52:54:00:d2:70:b0
>virtio_pci0: attempting to allocate 3 MSI-X vectors (3 supported)
>msi: routing MSI-X IRQ 25 to local APIC 0 vector 52
>msi: routing MSI-X IRQ 26 to local APIC 0 vector 53
>msi: routing MSI-X IRQ 27 to local APIC 0 vector 54
>virtio_pci0: using IRQs 25-27 for MSI-X
>virtio_pci0: using per VQ MSIX interrupts
>vtnet0: netmap queues/slots: TX 1/256, RX 1/128
>000.000075 [ 450] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=128
>pcib4: <PCI-PCI bridge> mem 0xfce14000-0xfce14fff irq 22 at device 2.2 on pci0
>pcib0: allocated type 3 (0xfca00000-0xfcbfffff) for rid 20 of pcib4
>pcib0: allocated type 3 (0xfe600000-0xfe7fffff) for rid 24 of pcib4
>pcib4: HotPlug command: 01c0 -> 19fb
>pcib4:   domain            0
>pcib4:   secondary bus     4
>pcib4:   subordinate bus   4
>pcib4:   memory decode     0xfca00000-0xfcbfffff
>pcib4:   prefetched decode 0xfe600000-0xfe7fffff
>pci4: <PCI bus> on pcib4
>pcib4: allocated bus range (4-4) for rid 0 of pci4
>pci4: domain=0, physical bus=4
>found->	vendor=0x1af4, dev=0x1043, revid=0x01
>	domain=0, bus=4, slot=0, func=0
>	class=07-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0103, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI-X supports 2 messages in map 0x14
>	map[14]: type Memory, range 32, base 0xfca00000, size 12, enabled
>pcib4: allocated memory range (0xfca00000-0xfca00fff) for rid 14 of pci0:4:0:0
>	map[20]: type Prefetchable Memory, range 64, base 0xfe600000, size 14, enabled
>pcib4: allocated prefetch range (0xfe600000-0xfe603fff) for rid 20 of pci0:4:0:0
>pcib0: matched entry for 0.2.INTA (src \_SB_.GSIG:0)
>pcib0: slot 2 INTA routed to irq 22 via \_SB_.GSIG
>pcib4: slot 0 INTA is routed to irq 22
>virtio_pci1: <VirtIO PCI (modern) Console adapter> mem 0xfca00000-0xfca00fff,0xfe600000-0xfe603fff irq 22 at device 0.0 on pci4
>pcib5: <PCI-PCI bridge> mem 0xfce15000-0xfce15fff irq 22 at device 2.3 on pci0
>pcib0: allocated type 3 (0xfc800000-0xfc9fffff) for rid 20 of pcib5
>pcib0: allocated type 3 (0xfe400000-0xfe5fffff) for rid 24 of pcib5
>pcib5: HotPlug command: 01c0 -> 19fb
>pcib5:   domain            0
>pcib5:   secondary bus     5
>pcib5:   subordinate bus   5
>pcib5:   memory decode     0xfc800000-0xfc9fffff
>pcib5:   prefetched decode 0xfe400000-0xfe5fffff
>pci5: <PCI bus> on pcib5
>pcib5: allocated bus range (5-5) for rid 0 of pci5
>pci5: domain=0, physical bus=5
>found->	vendor=0x1af4, dev=0x1042, revid=0x01
>	domain=0, bus=5, slot=0, func=0
>	class=01-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI-X supports 2 messages in map 0x14
>	map[14]: type Memory, range 32, base 0xfc800000, size 12, enabled
>pcib5: allocated memory range (0xfc800000-0xfc800fff) for rid 14 of pci0:5:0:0
>	map[20]: type Prefetchable Memory, range 64, base 0xfe400000, size 14, enabled
>pcib5: allocated prefetch range (0xfe400000-0xfe403fff) for rid 20 of pci0:5:0:0
>pcib0: matched entry for 0.2.INTA (src \_SB_.GSIG:0)
>pcib0: slot 2 INTA routed to irq 22 via \_SB_.GSIG
>pcib5: slot 0 INTA is routed to irq 22
>virtio_pci2: <VirtIO PCI (modern) Block adapter> mem 0xfc800000-0xfc800fff,0xfe400000-0xfe403fff irq 22 at device 0.0 on pci5
>vtblk0: <VirtIO Block Adapter> on virtio_pci2
>virtio_pci2: host features: 0x130006e54 <Version1,RingEventIdx,RingIndirectDesc,WriteZeros,Discard,ConfigWCE,Topology,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
>virtio_pci2: negotiated features: 0x110002e54 <Version1,RingIndirectDesc,Discard,ConfigWCE,Topology,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
>virtio_pci2: attempting to allocate 2 MSI-X vectors (2 supported)
>msi: routing MSI-X IRQ 28 to local APIC 0 vector 55
>msi: routing MSI-X IRQ 29 to local APIC 0 vector 56
>virtio_pci2: using IRQs 28-29 for MSI-X
>virtio_pci2: using per VQ MSIX interrupts
>vtblk0: 65536MB (134217728 512 byte sectors)
>pcib6: <PCI-PCI bridge> mem 0xfce16000-0xfce16fff irq 22 at device 2.4 on pci0
>pcib0: allocated type 3 (0xfc600000-0xfc7fffff) for rid 20 of pcib6
>pcib0: allocated type 3 (0xfe200000-0xfe3fffff) for rid 24 of pcib6
>pcib6: HotPlug command: 01c0 -> 19fb
>pcib6:   domain            0
>pcib6:   secondary bus     6
>pcib6:   subordinate bus   6
>pcib6:   memory decode     0xfc600000-0xfc7fffff
>pcib6:   prefetched decode 0xfe200000-0xfe3fffff
>pci6: <PCI bus> on pcib6
>pcib6: allocated bus range (6-6) for rid 0 of pci6
>pci6: domain=0, physical bus=6
>found->	vendor=0x1af4, dev=0x1045, revid=0x01
>	domain=0, bus=6, slot=0, func=0
>	class=00-ff-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0103, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	map[20]: type Prefetchable Memory, range 64, base 0xfe200000, size 14, enabled
>pcib6: allocated prefetch range (0xfe200000-0xfe203fff) for rid 20 of pci0:6:0:0
>pcib0: matched entry for 0.2.INTA (src \_SB_.GSIG:0)
>pcib0: slot 2 INTA routed to irq 22 via \_SB_.GSIG
>pcib6: slot 0 INTA is routed to irq 22
>virtio_pci3: <VirtIO PCI (modern) Balloon adapter> mem 0xfe200000-0xfe203fff irq 22 at device 0.0 on pci6
>vtballoon0: <VirtIO Balloon Adapter> on virtio_pci3
>virtio_pci3: host features: 0x130000012 <Version1,RingEventIdx,RingIndirectDesc,0x10,StatsVq>
>virtio_pci3: negotiated features: 0x100000000 <Version1>
>virtio_pci3: using legacy interrupt
>pcib7: <PCI-PCI bridge> mem 0xfce17000-0xfce17fff irq 22 at device 2.5 on pci0
>pcib0: allocated type 3 (0xfc400000-0xfc5fffff) for rid 20 of pcib7
>pcib0: allocated type 3 (0xfe000000-0xfe1fffff) for rid 24 of pcib7
>pcib7: HotPlug command: 07c0 -> 17fb
>pcib7:   domain            0
>pcib7:   secondary bus     7
>pcib7:   subordinate bus   7
>pcib7:   memory decode     0xfc400000-0xfc5fffff
>pcib7:   prefetched decode 0xfe000000-0xfe1fffff
>uhci0: <Intel 82801I (ICH9) USB controller> port 0xc060-0xc07f irq 16 at device 29.0 on pci0
>ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 57
>usbus0 on uhci0
>uhci0: usbpf: Attached
>uhci1: <Intel 82801I (ICH9) USB controller> port 0xc080-0xc09f irq 17 at device 29.1 on pci0
>ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 58
>usbus1 on uhci1
>uhci1: usbpf: Attached
>uhci2: <Intel 82801I (ICH9) USB controller> port 0xc0a0-0xc0bf irq 18 at device 29.2 on pci0
>ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 59
>usbus2 on uhci2
>uhci2: usbpf: Attached
>ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfce18000-0xfce18fff irq 19 at device 29.7 on pci0
>ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 60
>usbus3: EHCI version 1.0
>usbus3 on ehci0
>ehci0: usbpf: Attached
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>ahci0: <Intel ICH9 AHCI SATA controller> port 0xc0c0-0xc0df mem 0xfce19000-0xfce19fff irq 16 at device 31.2 on pci0
>ahci0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 30 to local APIC 0 vector 61
>ahci0: using IRQ 30 for MSI
>ahci0: AHCI v1.00 with 6 1.5Gbps ports, Port Multiplier not supported
>ahci0: Caps: 64bit NCQ 1.5Gbps 32cmd 6ports
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich0: Caps:
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich1: Caps:
>ahcich2: <AHCI channel> at channel 2 on ahci0
>ahcich2: Caps:
>ahcich3: <AHCI channel> at channel 3 on ahci0
>ahcich3: Caps:
>ahcich4: <AHCI channel> at channel 4 on ahci0
>ahcich4: Caps:
>ahcich5: <AHCI channel> at channel 5 on ahci0
>ahcich5: Caps:
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>acpi_syscontainer0: <System Container> on acpi0
>acpi_syscontainer1: <System Container> port 0xcd8-0xce3 on acpi0
>acpi_syscontainer2: <System Container> port 0x620-0x62f on acpi0
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>uart0: console (9600,n,8,1)
>ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 62
>uart0: fast interrupt
>uart0: PPS capture mode: DCD
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0061
>atkbd: keyboard ID 0x41ab (2)
>kbdc: RESET_KBD return code:00fa
>kbdc: RESET_KBD status:00aa
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
>ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 63
>atkbd0: [GIANT-LOCKED]
>psm0: unable to allocate IRQ
>psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
>psm0: current command byte:0061
>kbdc: TEST_AUX_PORT status:0000
>kbdc: RESET_AUX return code:00fa
>kbdc: RESET_AUX status:00aa
>kbdc: RESET_AUX ID:0000
>kbdc: RESET_AUX return code:00fa
>kbdc: RESET_AUX status:00aa
>kbdc: RESET_AUX ID:0000
>psm: status 00 02 64
>psm: status 00 00 64
>psm: status 00 03 64
>psm: status 00 03 64
>psm: data 08 00 00
>psm: status 00 02 64
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 64
>psm0: [GIANT-LOCKED]
>WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0.
>psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
>psm0: config:00000000, flags:00000008, packet size:4
>psm0: syncmask:08, syncbits:00
>ACPI: Enabled 1 GPEs in block 00 to 3F
>ahc_isa_identify 0: ioport 0xc00 alloc failed
>ahc_isa_identify 1: ioport 0x1c00 alloc failed
>ahc_isa_identify 2: ioport 0x2c00 alloc failed
>ahc_isa_identify 3: ioport 0x3c00 alloc failed
>ahc_isa_identify 4: ioport 0x4c00 alloc failed
>ahc_isa_identify 5: ioport 0x5c00 alloc failed
>ahc_isa_identify 6: ioport 0x6c00 alloc failed
>ahc_isa_identify 7: ioport 0x7c00 alloc failed
>ahc_isa_identify 8: ioport 0x8c00 alloc failed
>ahc_isa_identify 9: ioport 0x9c00 alloc failed
>ahc_isa_identify 10: ioport 0xac00 alloc failed
>ahc_isa_identify 11: ioport 0xbc00 alloc failed
>ahc_isa_identify 12: ioport 0xcc00 alloc failed
>ahc_isa_identify 13: ioport 0xdc00 alloc failed
>ahc_isa_identify 14: ioport 0xec00 alloc failed
>pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
>isa_probe_children: disabling PnP devices
>atkbdc: atkbdc0 already exists; skipping it
>atrtc: atrtc0 already exists; skipping it
>sc: sc0 already exists; skipping it
>uart: uart0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>orm0: <ISA Option ROM> at iomem 0xe9000-0xeffff pnpid ORM0000 on isa0
>sc0 failed to probe on isa0
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
>pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
>VESA: INT 0x10 vector 0xc000:0x5634
>VESA: information block
>0000   56 45 53 41 00 03 d9 58 00 c0 01 00 00 00 22 00
>0010   00 04 00 01 00 00 ed 58 00 c0 00 59 00 c0 14 59
>0020   00 c0 00 01 01 01 02 01 03 01 04 01 05 01 06 01
>0030   07 01 0d 01 0e 01 0f 01 10 01 11 01 12 01 13 01
>0040   14 01 15 01 16 01 17 01 18 01 19 01 1a 01 1b 01
>0050   1c 01 1d 01 1e 01 1f 01 40 01 41 01 42 01 43 01
>0060   44 01 45 01 46 01 47 01 48 01 49 01 4a 01 4b 01
>0070   4c 01 75 01 76 01 77 01 78 01 79 01 7a 01 7b 01
>0080   7c 01 7d 01 7e 01 7f 01 80 01 81 01 82 01 83 01
>0090   84 01 85 01 86 01 87 01 88 01 89 01 8a 01 8b 01
>00a0   8c 01 8d 01 8e 01 8f 01 90 01 91 01 92 01 93 01
>00b0   94 01 95 01 96 01 97 01 98 01 00 00 01 00 02 00
>00c0   03 00 04 00 05 00 06 00 07 00 0d 00 0e 00 0f 00
>00d0   10 00 11 00 12 00 13 00 6a 00 ff ff 00 00 00 00
>00e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0100   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0110   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0120   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0130   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0140   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0150   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0160   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0170   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0180   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0190   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>VESA: 92 mode(s) found
>attimer0: <AT timer> at port 0x40 on isa0
>pcib0: allocated type 4 (0x40-0x43) for rid 0 of attimer0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 65
>Event timer "i8254" frequency 1193182 Hz quality 100
>attimer0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
>pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
>pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
>fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>ppc0: cannot reserve I/O port range
>ppc0 failed to probe at irq 7 on isa0
>pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1
>uart1 failed to probe at port 0x2f8 irq 3 on isa0
>isa_probe_children: probing PnP devices
>Device configuration finished.
>procfs registered
>Timecounters tick every 10.000 msec
>lo0: bpf attached
>vlan: initialized, using hash tables with chaining
>IPsec: Initialized Security Association Processing.
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192
>pcib1: HotPlug interrupt: 0xd0
>pcib1: Command Completed
>pcib3: HotPlug interrupt: 0xd0
>pcib3: Command Completed
>pcib4: HotPlug interrupt: 0xd0
>pcib4: Command Completed
>pcib5: HotPlug interrupt: 0xd0
>pcib5: Command Completed
>pcib6: HotPlug interrupt: 0xd0
>pcib6: Command Completed
>pcib7: HotPlug interrupt: 0x10
>pcib7: Command Completed
>hdacc0: <Generic (0x1af40022) HDA CODEC> at cad 0 on hdac0
>hdaa0: <Generic (0x1af40022) Audio Function Group> at nid 1 on hdacc0
>hdaa0: Subsystem ID: 0x1af40022
>hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
>hdaa0: Original pins configuration:
>hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa0:  3 00004010 1  0  Line-out      Jack  Unknown 0x00       Green   0
>hdaa0:  5 00805020 2  0  Line-in       Jack  Unknown 0x00       Red     0
>hdaa0: Patched pins configuration:
>hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa0:  3 00004010 1  0  Line-out      Jack  Unknown 0x00       Green   0
>hdaa0:  5 00805020 2  0  Line-in       Jack  Unknown 0x00       Red     0
>hdaa0: 2 associations found:
>hdaa0: Association 0 (1) out:
>hdaa0:  Pin nid=3 seq=0
>hdaa0: Association 1 (2) in:
>hdaa0:  Pin nid=5 seq=0
>hdaa0: Tracing association 0 (1)
>hdaa0:  Pin 3 traced to DAC 2
>hdaa0: Association 0 (1) trace succeeded
>hdaa0: Tracing association 1 (2)
>hdaa0:  Pin 5 traced to ADC 4
>hdaa0: Association 1 (2) trace succeeded
>hdaa0: Looking for additional DAC for association 0 (1)
>hdaa0: Looking for additional ADC for association 1 (2)
>hdaa0: Tracing input monitor
>hdaa0: Tracing other input monitors
>hdaa0:  Tracing nid 5 to out
>hdaa0: Tracing beeper
>hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
>pcm0: <Generic (0x1af40022) (Analog)> at nid 3 and 5 on hdaa0
>pcm0: Playback:
>pcm0:      Stream cap: 0x00000001 PCM
>pcm0:         PCM cap: 0x000201fc 16 bits, 16 22 32 44 48 88 96 KHz
>pcm0:             DAC: 2
>pcm0: 
>pcm0:     nid=3 [pin: Line-out (Green Jack)]
>pcm0:       + <- nid=2 [audio output] [src: pcm]
>pcm0: 
>pcm0: Record:
>pcm0:      Stream cap: 0x00000001 PCM
>pcm0:         PCM cap: 0x000201fc 16 bits, 16 22 32 44 48 88 96 KHz
>pcm0:             ADC: 4
>pcm0: 
>pcm0:     nid=4 [audio input]
>pcm0:       + <- nid=5 [pin: Line-in (Red Jack)] [src: line]
>pcm0: 
>pcm0: Master Volume (OSS: vol): -74/0dB
>pcm0:    +- ctl  1 (nid   2 out):    -74/0dB (75 steps) + mute
>pcm0: 
>pcm0: PCM Volume (OSS: pcm): -74/0dB
>pcm0:    +- ctl  1 (nid   2 out):    -74/0dB (75 steps) + mute
>pcm0: 
>pcm0: Line-in Volume (OSS: line): -74/0dB
>pcm0:    +- ctl  2 (nid   4 in   0): -74/0dB (75 steps) + mute
>pcm0: 
>pcm0: Recording Level (OSS: rec): -74/0dB
>pcm0:    +- ctl  2 (nid   4 in   0): -74/0dB (75 steps) + mute
>pcm0: 
>pcm0: Mixer "vol":
>pcm0: Mixer "pcm":
>pcm0: Mixer "line":
>pcm0: Mixer "rec":
>pcm0: Playback channel set is: Front Left, Front Right, 
>pcm0: Playback channel matrix is: 2.0 (unknown)
>pcm0: Automatically set rec source to: line
>pcm0: Recording channel set is: Front Left, Front Right, 
>pcm0: Recording channel matrix is: 2.0 (unknown)
>pci0: driver added
>found->	vendor=0x8086, dev=0x2930, revid=0x02
>	domain=0, bus=0, slot=31, func=3
>	class=0c-05-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0103, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>pci0:0:31:3: reprobing on driver added
>pci1: driver added
>pci2: driver added
>pci3: driver added
>pci4: driver added
>pci5: driver added
>pci6: driver added
>GEOM: new disk vtbd0
>usbus0: 12Mbps Full Speed USB v1.0
>usbus1: 12Mbps Full Speed USB v1.0
>usbus2: 12Mbps Full Speed USB v1.0
>usbus3: 480Mbps High Speed USB v2.0
>ahcich0: AHCI reset...
>ahcich0: SATA connect time=0us status=00000113
>ahcich0: AHCI reset: device found
>ahcich0: AHCI reset: device ready after 0ms
>ahcich1: AHCI reset...
>ugen3.1: <Intel EHCI root HUB> at usbus3
>uhub0 on usbus3
>uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>ugen2.1: <Intel UHCI root HUB> at usbus2
>uhub1 on usbus2
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen1.1: <Intel UHCI root HUB> at usbus1
>uhub2 on usbus1
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>ugen0.1: <Intel UHCI root HUB> at usbus0
>uhub3 on usbus0
>uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ahcich1: SATA connect timeout time=10000us status=00000000
>ahcich1: AHCI reset: device not found
>ahcich2: AHCI reset...
>Trying to mount root from cd9660:/dev/iso9660/13_0_RELEASE_AMD64_DVD [ro]...
>ahcich2: SATA connect timeout time=10000us status=00000000
>ahcich2: AHCI reset: device not found
>ahcich3: AHCI reset...
>ahcich3: SATA connect timeout time=10000us status=00000000
>ahcich3: AHCI reset: device not found
>ahcich4: AHCI reset...
>ahcich4: SATA connect timeout time=10000us status=00000000
>ahcich4: AHCI reset: device not found
>ahcich5: AHCI reset...
>ahcich5: SATA connect timeout time=10000us status=00000000
>ahcich5: AHCI reset: device not found
>pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
>pass0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
>pass0: Serial Number QM00001
>pass0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
>cd0 at ahcich0 bus 0 scbus0 target 0 lun 0
>cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
>cd0: Serial Number QM00001
>cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
>cd0: 4562MB (2335946 2048 byte sectors)
>GEOM: new disk cd0
>cd9660: RockRidge Extension
>atrtc0: providing initial system time
>Dual Console: Video Primary, Serial Secondary
>start_init: trying /sbin/init
>random: unblocking device.
>pci0: driver added
>found->	vendor=0x8086, dev=0x2930, revid=0x02
>	domain=0, bus=0, slot=31, func=3
>	class=0c-05-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0103, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>pci0:0:31:3: reprobing on driver added
>ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x700-0x73f irq 16 at device 31.3 on pci0
>smbus0: <System Management Bus> on ichsmb0
>pci1: driver added
>pci2: driver added
>pci3: driver added
>pci4: driver added
>pci5: driver added
>pci6: driver added
>vtcon0: <VirtIO Console Adapter> on virtio_pci1
>virtio_pci1: host features: 0x130000006 <Version1,RingEventIdx,RingIndirectDesc,EmergencyWrite,MultiplePorts>
>virtio_pci1: negotiated features: 0x100000002 <Version1,MultiplePorts>
>virtio_pci1: attempting to allocate 2 MSI-X vectors (2 supported)
>msi: routing MSI-X IRQ 31 to local APIC 0 vector 66
>msi: routing MSI-X IRQ 32 to local APIC 0 vector 67
>virtio_pci1: using IRQs 31-32 for MSI-X
>virtio_pci1: using shared MSIX interrupts
>lo0: link state changed to UP
>uhub3: 2 ports with 2 removable, self powered
>uhub2: 2 ports with 2 removable, self powered
>uhub1: 2 ports with 2 removable, self powered
>
>
>Fatal trap 12: page fault while in kernel mode
>cpuid = 0; apic id = 00
>fault virtual address	= 0xfffffe004adb50c0
>fault code		= supervisor write data, page not present
>instruction pointer	= 0x20:0xffffffff81086d0d
>stack pointer	        = 0x28:0xfffffe004adb3850
>frame pointer	        = 0x28:0xfffffe004adb3850
>code segment		= base 0x0, limit 0xfffff, type 0x1b
>			= DPL 0, pres 1, long 1, def32 0, gran 1
>processor eflags	= interrupt enabled, resume, IOPL = 0
>current process		= 615 (syslogd)
>trap number		= 12
>panic: page fault
>cpuid = 0
>time = 1632906951
>KDB: stack backtrace:
>#0 0xffffffff80c57345 at kdb_backtrace+0x65
>#1 0xffffffff80c09d21 at vpanic+0x181
>#2 0xffffffff80c09b93 at panic+0x43
>#3 0xffffffff8108b187 at trap_fatal+0x387
>#4 0xffffffff8108b1df at trap_pfault+0x4f
>#5 0xffffffff8108a83d at trap+0x27d
>#6 0xffffffff810617a8 at calltrap+0x8
>#7 0xffffffff81064e71 at fpugetregs+0x171
>#8 0xffffffff810686ec at sendsig+0x16c
>#9 0xffffffff80c0f527 at postsig+0x1a7
>#10 0xffffffff80c6dfa7 at ast+0x307
>#11 0xffffffff810641b9 at doreti_ast+0x1f
>Uptime: 3s
>
>

Actions: View

Attachments on bug 258776: 228242 | 228243 | 228244 | 228248 | 228249