Script started on Tue Nov 23 02:09:30 2021 (0:2) new-gate:/sysprog/terry# smartctl -d scsi -i -r ioctl,3 /dev/da0 smartctl 7.2 2021-09-14 r5236 [FreeBSD 12.2-STABLE amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org [inquiry: 12 01 00 00 fc 00 ] CAM status=0x1, SCSI status=0x0, resid=0x0 Incoming data, len=252: 00 00 00 00 03 00 80 83 00 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 [inquiry: 12 00 00 00 24 00 ] CAM status=0x1, SCSI status=0x0, resid=0x0 Incoming data, len=36: 00 00 00 05 02 5b 00 00 02 44 45 4c 4c 20 20 20 20 10 50 45 52 43 20 48 37 33 30 20 4d 69 6e 69 20 20 20 34 2e 33 30 status=0x0 === START OF INFORMATION SECTION === Vendor: DELL Product: PERC H730 Mini Revision: 4.30 Compliance: SPC-3 [read capacity(16): 9e 10 00 00 00 00 00 00 00 00 00 00 00 20 00 00 ] CAM status=0x1, SCSI status=0x0, resid=0x0 Incoming data, len=32: 00 00 00 00 00 6f a7 ff ff 00 00 02 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 User Capacity: 959,119,884,288 bytes [959 GB] Logical block size: 512 bytes [mode sense(6): 1a 00 84 00 40 00 ] CAM status=0x8c, SCSI status=0x0, resid=0x0 Incoming data, len=64: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 sense_len=0x12, sense_resid=0x0 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0d 00 00 00 00 24 00 00 00 10 00 00 status=0x0: sense_key=0x5 asc=0x24 ascq=0x0 scsiModePageOffset: response length too short, resp_len=1 offset=4 bd_len=0 [mode sense(6): 1a 00 1c 00 40 00 ] CAM status=0x8c, SCSI status=0x0, resid=0x0 Incoming data, len=64: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 sense_len=0x12, sense_resid=0x0 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0d 00 00 00 00 24 00 00 00 10 00 00 status=0x0: sense_key=0x5 asc=0x24 ascq=0x0 scsiModePageOffset: response length too short, resp_len=1 offset=4 bd_len=0 >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. (2:3) new-gate:/sysprog/terry# camcontrol devlist -v scbus0 on mrsas0 bus 0: at scbus0 target 0 lun 0 (pass0,da0) <> at scbus0 target -1 lun ffffffff () scbus1 on mrsas0 bus 1: <> at scbus1 target -1 lun ffffffff () scbus2 on ahcich0 bus 0: <> at scbus2 target -1 lun ffffffff () scbus3 on ahcich1 bus 0: <> at scbus3 target -1 lun ffffffff () scbus4 on ahcich2 bus 0: <> at scbus4 target -1 lun ffffffff () scbus5 on ahcich3 bus 0: <> at scbus5 target -1 lun ffffffff () scbus6 on ahciem0 bus 0: at scbus6 target 0 lun 0 (ses0,pass1) <> at scbus6 target -1 lun ffffffff () scbus7 on ahcich4 bus 0: <> at scbus7 target -1 lun ffffffff () scbus8 on ahcich5 bus 0: <> at scbus8 target -1 lun ffffffff () scbus9 on ahcich6 bus 0: <> at scbus9 target -1 lun ffffffff () scbus10 on ahcich7 bus 0: <> at scbus10 target -1 lun ffffffff () scbus11 on ahcich8 bus 0: <> at scbus11 target -1 lun ffffffff () scbus12 on ahcich9 bus 0: at scbus12 target 0 lun 0 (cd0,pass2) <> at scbus12 target -1 lun ffffffff () scbus13 on ahciem1 bus 0: at scbus13 target 0 lun 0 (ses1,pass3) <> at scbus13 target -1 lun ffffffff () scbus14 on mpr0 bus 0: at scbus14 target 7 lun 0 (sa0,pass4) <> at scbus14 target -1 lun ffffffff () scbus-1 on xpt0 bus 0: <> at scbus-1 target -1 lun ffffffff (xpt0) (0:4) new-gate:/sysprog/terry# exit exit Script done on Tue Nov 23 02:10:12 2021