FreeBSD uncannyvalley.bhtooefr.org 12.2-RELEASE-p7 FreeBSD 12.2-RELEASE-p7 GENERIC  amd64
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE-p7 GENERIC amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU           L5420  @ 2.50GHz (2500.14-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x1067a  Family=0x6  Model=0x17  Stepping=10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xc0ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,XSAVE,OSXSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  VT-x: HLT,PAUSE
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16614834176 (15845 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <100509 APIC1012>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20200430/tbfadt-748)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 2 1 3 4 5 7 6
Timecounter "TSC-low" frequency 1250070956 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4336] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81115e70, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <100509 XSDT1012> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection> port 0xbc00-0xbc1f mem 0xdf1c0000-0xdf1dffff,0xdf1fe000-0xdf1fefff irq 20 at device 25.0 on pci0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: 00:23:8b:8a:90:02
em0: netmap queues/slots: TX 1/1024, RX 1/1024
uhci0: <Intel 82801I (ICH9) USB controller> port 0xb880-0xb89f irq 23 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf1ff800-0xdf1ffbff irq 21 at device 26.7 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib5
mpt0: <LSILogic SAS/SATA Adapter> port 0xc000-0xc0ff mem 0xdf5fc000-0xdf5fffff,0xdf5e0000-0xdf5effff irq 16 at device 0.0 on pci5
mpt0: MPI Version=1.5.14.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (14 Max)
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib6
em1: <Intel(R) PRO/1000 Network Connection> port 0xdc00-0xdc1f mem 0xdf6e0000-0xdf6fffff irq 16 at device 0.0 on pci6
em1: Using 1024 TX descriptors and 1024 RX descriptors
em1: Using an MSI interrupt
em1: Ethernet address: 00:23:8b:8a:90:03
em1: netmap queues/slots: TX 1/1024, RX 1/1024
uhci1: <Intel 82801I (ICH9) USB controller> port 0xb800-0xb81f irq 23 at device 29.0 on pci0
uhci1: LegSup = 0x2f00
usbus2 on uhci1
usbus2: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0xb480-0xb49f irq 22 at device 29.1 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801I (ICH9) USB controller> port 0xb400-0xb41f irq 21 at device 29.2 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf1ff400-0xdf1ff7ff irq 23 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
usbus5: 480Mbps High Speed USB v2.0
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xdf800000-0xdfffffff,0xdf7e0000-0xdf7fffff irq 18 at device 3.0 on pci7
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 drq 0 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xcf000-0xcffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x429 offMax=0x6e28
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen3.1: <Intel UHCI root HUB> at usbus3
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen5.1: <Intel EHCI root HUB> at usbus5
Trying to mount root from zfs:zroot/ROOT []...
Root mount waiting for: usbus0 usbus1 CAM usbus2 usbus3 usbus4 usbus5
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
da2 at mpt0 bus 0 scbus0 target 3 lun 0
da2: <TOSHIBA MG03SCA200 0108> Fixed Direct Access SPC-3 SCSI device
da2: Serial Number 7490A017FTP6
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 1907729MB (3907029168 512 byte sectors)
da0 at mpt0 bus 0 scbus0 target 0 lun 0
da0: <ATA Samsung SSD 860 4B6Q> Fixed Direct Access SPC-3 SCSI device
da0: Serial Number S597NJ0N706341X     
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 1907729MB (3907029168 512 byte sectors)
da1 at mpt0 bus 0 scbus0 target 2 lun 0
da1: <ATA Samsung SSD 860 4B6Q> Fixed Direct Access SPC-3 SCSI device
da1: Serial Number S597NJ0N708097M     
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 1907729MB (3907029168 512 byte sectors)
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
da3 at mpt0 bus 0 scbus0 target 1 lun 0
da3: <ATA Samsung SSD 860 4B6Q> Fixed Direct Access SPC-3 SCSI device
da3: Serial Number S597NJ0N706372F     
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 1907729MB (3907029168 512 byte sectors)
GEOM_MIRROR: Device mirror/swap launched (3/3).
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5
Root mount waiting for: usbus5
uhub4: 6 ports with 6 removable, self powered
ugen0.2: <VIRTUAL USB MULTIMEDIA KEYBOARD> at usbus0
ukbd0 on uhub5
ukbd0: <VIRTUAL USB MULTIMEDIA KEYBOARD, class 0/0, rev 1.10/0.01, addr 2> on usbus0
kbd2 at ukbd0
ugen2.2: <American Power Conversion Smart-UPS  X138 FW:667.1X138.D USB FW:11.01> at usbus2
lo0: link state changed to UP
em0: link state changed to UP
ums0 on uhub5
ums0: <VIRTUAL USB MULTIMEDIA KEYBOARD, class 0/0, rev 1.10/0.01, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled