---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-RELEASE-p1 GENERIC amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz (2200.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406f1  Family=0x6  Model=0x4f  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
  Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33242578944 (31702 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 44 CPUs
FreeBSD/SMP: 2 package(s) x 22 core(s) x 2 hardware threads
FreeBSD/SMP Online: 2 package(s) x 22 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
Launching APs: 41 29 27 22 36 5 24 13 16 32 19 33 39 42 40 12 38 43 31 17 28 21 37 6 35 30 8 2 34 4 26 9 18 1 3 25 7 14 10 20 11 23 15
Timecounter "TSC-low" frequency 1100022627 Hz quality 1000
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
000.000019 [4344] netmap_init               netmap: loaded module
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff811848b0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd1 at kbdmux0
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 8.2 (no driver attached)
pci0: <dasp, performance counters> at device 9.2 (no driver attached)
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <unknown> at device 14.2 (no driver attached)
pci0: <unknown> at device 14.3 (no driver attached)
pci0: <unknown> at device 14.4 (no driver attached)
pci0: <unknown> at device 14.5 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
pci0: <dasp, performance counters> at device 18.5 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: <dasp, performance counters> at device 8.2 (no driver attached)
pci1: <dasp, performance counters> at device 9.2 (no driver attached)
pci1: <dasp, performance counters> at device 11.1 (no driver attached)
pci1: <dasp, performance counters> at device 11.2 (no driver attached)
pci1: <unknown> at device 14.2 (no driver attached)
pci1: <unknown> at device 14.3 (no driver attached)
pci1: <unknown> at device 14.4 (no driver attached)
pci1: <unknown> at device 14.5 (no driver attached)
pci1: <dasp, performance counters> at device 16.1 (no driver attached)
pci1: <dasp, performance counters> at device 16.6 (no driver attached)
pci1: <dasp, performance counters> at device 18.1 (no driver attached)
pci1: <dasp, performance counters> at device 18.5 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci2
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
AVAGO MegaRAID SAS FreeBSD mrsas driver version: 07.709.04.00-fbsd
mfi0: <Invader> port 0x2000-0x20ff mem 0x91d00000-0x91d0ffff,0x91c00000-0x91cfffff irq 26 at device 0.0 numa-domain 0 on pci3
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23
mfi0: FW MaxCmds = 928, limiting to 128
mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0
mfi0: 4863 (698556622s/0x0020/info) - Shutdown command received from host
mfi0: 4864 (boot + 10s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1f49/1028)
mfi0: 4865 (boot + 10s/0x0020/info) - Firmware version 4.300.00-8352
mfi0: 4866 (boot + 11s/0x0008/info) - Battery Present
mfi0: 4867 (boot + 11s/0x0020/info) - Package version 25.5.6.0009
mfi0: 4868 (boot + 11s/0x0020/info) - Board Revision A06
mfi0: 4869 (boot + 15s/0x0008/info) - Battery temperature is normal
mfi0: 4870 (boot + 15s/0x0008/info) - Current capacity of the battery is above threshold
pcib4: mfi0: 4871 (boot + 29s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 4872 (boot + 29s/0x0002/info) - Inserted: Encl PD 20
<ACPI PCI-PCI bridge> irq 47 at device 2.0mfi0:  numa-domain 0 on pci2
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
4873 (boot + 29s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=528660a0b0820d00,0000000000000000
mfi0: 4874 (boot + 29s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 4875 (boot + 29s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=4433221104000000,0000000000000000
mfi0: pcib5: 4876 (boot + 29s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive
mfi0: 4877 (boot + 29s/0x0002/info) - Inserted: PD 01(e0x20/s1)
<ACPI PCI-PCI bridge> irq mfi0: 47 at device 3.0 numa-domain 0 on pci2
pci5: 4878 (boot + 29s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=4433221100000000,0000000000000000
mfi0: 4879 (boot + 29s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive
mfi0: 4880 (boot + 42s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: <ACPI PCI bus> numa-domain 04881 (698556674s/0x0020/info) - Time established as 02/19/22  3:31:14; (42 seconds since power on)
mfi0: 4882 (698556773s/0x0020/info) - Host driver is loaded and operational
 on pcib5
bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a30000-0x91a3ffff,0x91a40000-0x91a4ffff,0x91a50000-0x91a5ffff irq 40 at device 0.0 numa-domain 0 on pci5
bge0: APE FW version: NCSI v1.3.16.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: 18:66:da:fb:19:da
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a00000-0x91a0ffff,0x91a10000-0x91a1ffff,0x91a20000-0x91a2ffff irq 44 at device 0.1 numa-domain 0 on pci5
bge1: APE FW version: NCSI v1.3.16.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: 18:66:da:fb:19:db
pcib6: <ACPI PCI-PCI bridge> irq 47 at device 3.1 numa-domain 0 on pci2
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
bge2: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91b30000-0x91b3ffff,0x91b40000-0x91b4ffff,0x91b50000-0x91b5ffff irq 41 at device 0.0 numa-domain 0 on pci6
bge2: APE FW version: NCSI v1.3.16.0
bge2: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: 18:66:da:fb:19:d8
bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91b00000-0x91b0ffff,0x91b10000-0x91b1ffff,0x91b20000-0x91b2ffff irq 45 at device 0.1 numa-domain 0 on pci6
bge3: APE FW version: NCSI v1.3.16.0
bge3: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus3: <MII bus> numa-domain 0 on bge3
brgphy3: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: 18:66:da:fb:19:d9
pcib7: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci2
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pci2: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0x3078-0x307f,0x308c-0x308f,0x3070-0x3077,0x3088-0x308b,0x3040-0x305f mem 0x91e01000-0x91e017ff irq 16 at device 17.4 numa-domain 0 on pci2
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci2: <simple comms> at device 22.0 (no driver attached)
pci2: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x91e03000-0x91e033ff irq 18 at device 26.0 numa-domain 0 on pci2
usbus0: EHCI version 1.0
usbus0 numa-domain 0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib8: <PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2
pci8: <PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci2
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9
pci10: <PCI bus> numa-domain 0 on pcib10
pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10
pci11: <PCI bus> numa-domain 0 on pcib11
pcib12: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci11
pci12: <PCI bus> numa-domain 0 on pcib12
vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff irq 19 at device 0.0 numa-domain 0 on pci12
vgapci0: Boot video device
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x91e02000-0x91e023ff irq 18 at device 29.0 numa-domain 0 on pci2
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2
isa0: <ISA bus> numa-domain 0 on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0x3068-0x306f,0x3084-0x3087,0x3060-0x3067,0x3080-0x3083,0x3020-0x303f mem 0x91e00000-0x91e007ff irq 16 at device 31.2 numa-domain 0 on pci2
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib13: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pci13: <ACPI PCI bus> numa-domain 1 on pcib13
pcib14: <ACPI PCI-PCI bridge> irq 71 at device 1.0 numa-domain 1 on pci13
pci14: <ACPI PCI bus> numa-domain 1 on pcib14
pcib15: <ACPI PCI-PCI bridge> irq 71 at device 3.0 numa-domain 1 on pci13
pci15: <ACPI PCI bus> numa-domain 1 on pcib15
ixl0: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0xc9000000-0xc9ffffff,0xca008000-0xca00ffff irq 64 at device 0.0 numa-domain 1 on pci15
ixl0: fw 6.80.48812 api 1.7 nvm 6.00 etid 800062c3 oem 18.4608.17
ixl0: PF-ID[0]: VFs 64, MSI-X 129, VF MSI-X 5, QPs 768, I2C
ixl0: Using 1024 TX descriptors and 1024 RX descriptors
ixl0: Using 22 RX queues 22 TX queues
ixl0: Using MSI-X interrupts with 23 vectors
taskqgroup_attach_cpu: qid not found for iov cpu=22
ixl0: taskqgroup_attach_cpu failed 22
ixl0: Ethernet address: f8:f2:1e:7c:52:60
ixl0: Allocating 32 queues for PF LAN VSI; 22 queues active
ixl0: PCI Express Bus: Speed 8.0GT/s Width x8
ixl0: Failed to initialize SR-IOV (error=2)
ixl0: netmap queues/slots: TX 22/1024, RX 22/1024
ixl1: <Intel(R) Ethernet Controller X710 for 10GbE SFP+ - 2.3.1-k> mem 0xc8000000-0xc8ffffff,0xca000000-0xca007fff irq 64 at device 0.1 numa-domain 1 on pci15
ixl1: fw 6.80.48812 api 1.7 nvm 6.00 etid 800062c3 oem 18.4608.17
ixl1: PF-ID[1]: VFs 64, MSI-X 129, VF MSI-X 5, QPs 768, I2C
ixl1: Using 1024 TX descriptors and 1024 RX descriptors
ixl1: Using 22 RX queues 22 TX queues
ixl1: Using MSI-X interrupts with 23 vectors
taskqgroup_attach_cpu: qid not found for iov cpu=22
ixl1: taskqgroup_attach_cpu failed 22
ixl1: Ethernet address: f8:f2:1e:7c:52:61
ixl1: Allocating 32 queues for PF LAN VSI; 22 queues active
ixl1: PCI Express Bus: Speed 8.0GT/s Width x8
ixl1: Failed to initialize SR-IOV (error=2)
ixl1: netmap queues/slots: TX 22/1024, RX 22/1024
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8800-0xcbfff,0xcc000-0xd37ff,0xed800-0xf17ff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None
ixl0: link state changed to UP
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est15 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est16 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est17 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est18 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est19 attach returned 6
ixl1: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None
ixl1: link state changed to UP
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est20 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est21 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est22 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est23 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est24 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est25 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est26 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est27 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est28 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est29 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est30 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est31 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est32 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est33 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est34 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est35 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est36 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est37 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est38 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est39 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est40 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est41 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est42 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f4700001c00
device_attach: est43 attach returned 6
Timecounters tick every 1.000 msec
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
mfid0 numa-domain 0 on mfi0
mfid0: 152064MB (311427072 sectors) RAID volume 'DISCO_SSD' is optimal
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus11 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ses1: cd0,pass1 in 'Slot 05', SATA Slot: scbus10 target 0
cd0 at ahcich9 bus 0 scbus10 target 0 lun 0
cd0: <HL-DT-ST DVD+-RW GU90N A3C0> Removable CD-ROM SCSI device
cd0: Serial Number KZRGC8E4004
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/mfid0p2 [rw]...
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087 product 0x800a> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x8002> at usbus1
uhub3 numa-domain 0 on uhub1
uhub3: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1
[3] uhub2: 6 ports with 6 removable, self powered
[3] uhub3: 8 ports with 8 removable, self powered
[4] ugen0.3: <no manufacturer Gadget USB HUB> at usbus0
[4] uhub4 numa-domain 0 on uhub2
[4] uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0
[5] uhub4: 6 ports with 6 removable, self powered
[7] acpi_wmi0: <ACPI-WMI mapping> on acpi0
[7] acpi_wmi0: cannot find EC device
[7] device_attach: acpi_wmi0 attach returned 6
[7] acpi_wmi0: <ACPI-WMI mapping> on acpi0
[7] acpi_wmi0: cannot find EC device
[7] device_attach: acpi_wmi0 attach returned 6
[7] ugen0.4: <Avocent Mass Storage Function> at usbus0
[7] umass0 numa-domain 0 on uhub4
[7] umass0: <SCSI Transparent Interface 0> on usbus0
[7] umass0:  SCSI over Bulk-Only; quirks = 0x0000
[7] umass0:12:0: Attached to scbus12
[7] cd1 at umass-sim0 bus 0 scbus12 target 0 lun 0
cd1: <iDRAC Virtual CD 0329> Removable CD-ROM SCSI device
cd1: 40.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd1: quirks=0x10<10_BYTE_ONLY>
[7] lo0: link state changed to UP
[7] da0 at umass-sim0 bus 0 scbus12 target 0 lun 1
da0: <iDRAC Virtual Floppy 0329> Removable Direct Access SCSI device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
[7] da0: Write Protected
[7] bge2: link state changed to DOWN
[7] ixl0: link state changed to DOWN
[7] ixl1: link state changed to DOWN
[8] ixl0: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None
[8] ixl0: link state changed to UP
[8] ixl1: Link is up, 10 Gbps Full Duplex, Requested FEC: None, Negotiated FEC: None, Autoneg: False, Flow Control: None
[8] ixl1: link state changed to UP
[8] ixl1.936: link state changed to UP
[8] ixl1.988: link state changed to UP
[8] ixl1.608: link state changed to UP
[8] ixl1.912: link state changed to UP
[8] ixl1.902: link state changed to UP
[8] ixl1.901: link state changed to UP
[11] bge2: link state changed to UP
[17] pflog0: promiscuous mode enabled