Attachment 249398 Details for Bug 277884 – dmesg from working boot

dmesg from working boot

dmesg.txt (text/plain), 16.88 KB, created by Lexi Winter on 2024-03-22 12:51:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Lexi Winter

Created: 2024-03-22 12:51:06 UTC

Size: 16.88 KB

patch

obsolete

>---<<BOOT>>---
>GDB: debug ports: uart
>GDB: current port: uart
>KDB: debugger backends: ddb gdb
>KDB: current backend: ddb
>WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance
>Copyright (c) 1992-2024 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 15.0-CURRENT #2 lf/main-n268061-e680dd46d4af: Fri Mar 15 14:29:41 GMT 2024
>    root@lily.eden.le-fay.org:/builds/obj/builds/src/freebsd/src/lf/main/arm64.aarch64/sys/GENERIC arm64
>FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367)
>WARNING: WITNESS option enabled, expect reduced performance.
>VT(efifb): resolution 592x448
>module scmi already present!
>real memory  = 4148158464 (3955 MB)
>avail memory = 4016934912 (3830 MB)
>Starting CPU 1 (1)
>Starting CPU 2 (2)
>Starting CPU 3 (3)
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>random: unblocking device.
>random: entropy device external interface
>kbd0 at kbdmux0
>ofwbus0: <Open Firmware Device Tree>
>simplebus0: <Flattened device tree simple bus> on ofwbus0
>ofw_clkbus0: <OFW clocks bus> on ofwbus0
>simplebus1: <Flattened device tree simple bus> on ofwbus0
>simplebus2: <Flattened device tree simple bus> on ofwbus0
>regfix0: <Fixed Regulator> on ofwbus0
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>regfix1: <Fixed Regulator> on ofwbus0
>regfix2: <Fixed Regulator> on ofwbus0
>regfix3: <Fixed Regulator> on ofwbus0
>regfix4: <Fixed Regulator> on ofwbus0
>simplebus3: <Flattened device tree simple bus> on ofwbus0
>simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x7d5d2000-0x7d5d2eff on simplebus0
>bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
>ofw_clkbus1: <OFW clocks bus> on bcm2835_firmware0
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 30 on simplebus0
>gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 14,15 on simplebus0
>gpiobus0: <OFW GPIO bus> on gpio0
>gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
>gpiobus1: <GPIO bus> on gpio1
>regfix0: Cannot configure GPIO pin: 5
>REGNODE_INIT failed: 6
>regfix0: Cannot register regulator.
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>regfix2: Cannot set GPIO pin: 6
>REGNODE_INIT failed: 6
>regfix2: Cannot register regulator.
>mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 13 on simplebus0
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>gpioregulator0: <GPIO controlled regulator> on ofwbus0
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0
>Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
>Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 31,32,33,34,35,36,37,38,39,40,41 on simplebus0
>usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0
>gpioc0: <GPIO controller> on gpio0
>uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 16 on simplebus0
>uart0: console (115200,n,8,1)
>spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 18 on simplebus0
>spibus0: <OFW SPI bus> on spi0
>spibus0: <unknown card> at cs 0 mode 0
>spibus0: <unknown card> at cs 1 mode 0
>sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 24 on simplebus0
>mmc0: <MMC/SD bus> on sdhci_bcm0
>iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 27 on simplebus0
>bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
>bcmrng0: <Broadcom BCM2835/BCM2838 RNG> mem 0x7e104000-0x7e104027 on simplebus0
>gpioc1: <GPIO controller> on gpio1
>fb0: <BCM2835 VT framebuffer driver> on simplebus0
>fb0: keeping existing fb bpp of 32
>fbd0 on fb0
>WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 15.0.
>VT: Replacing driver "efifb" with new "fb".
>fb0: 592x448(592x448@0,0) 32bpp
>fb0: fbswap: 1, pitch 2368, base 0x3eaf5000, screen_size 1060864
>sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq 79 on simplebus1
>mmc1: <MMC/SD bus> on sdhci_bcm1
>pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0
>cpulist0: <Open Firmware CPU Group> on ofwbus0
>cpu0: <Open Firmware CPU> on cpulist0
>bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
>pcib0: <BCM2838-compatible PCI-express controller> mem 0x7d500000-0x7d50930f irq 80,81 on simplebus2
>pcib0: hardware identifies as revision 0x304.
>pci0: <OFW PCI bus> on pcib0
>pcib1: <PCI-PCI bridge> irq 91 at device 0.0 on pci0
>pci1: <OFW PCI bus> on pcib1
>bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 92 at device 0.0 on pci1
>bcm_xhci0: 32 bytes context size, 64-bit DMA
>usbus0 on bcm_xhci0
>genet0: <RPi4 Gigabit Ethernet> mem 0x7d580000-0x7d58ffff irq 82,83 on simplebus2
>genet0: GENET version 5.0 phy 0x0000
>miibus0: <MII bus> on genet0
>brgphy0: <BCM54213PE 1000BASE-T media interface> PHY 1 on miibus0
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
>genet0: Ethernet address: d8:3a:dd:59:6a:4f
>clk_fixed4: clock-fixed has no clock-frequency
>clk_fixed4: clock-fixed has no clock-frequency
>gpioled0: <GPIO LEDs> on ofwbus0
>lock order reversal: (sleepable after non-sleepable)
> 1st 0xffff000000ddc678 LED mtx (LED mtx, sleep mutex) @ /builds/src/freebsd/src/lf/main/sys/dev/led/led.c:295
> 2nd 0xffffa000010f2c10 Raspberry Pi firmware gpio (Raspberry Pi firmware gpio, sx) @ /builds/src/freebsd/src/lf/main/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c:250
>lock order LED mtx -> Raspberry Pi firmware gpio attempted at:
>#0 0xffff00000052ad34 at witness_checkorder+0xa78
>#1 0xffff0000004bf238 at _sx_xlock+0x70
>#2 0xffff00000092c1c4 at rpi_fw_gpio_pin_set+0xe4
>#3 0xffff0000001df0c4 at led_create_state+0x15c
>#4 0xffff0000001a5fec at gpioled_attach+0x294
>#5 0xffff0000004f11b8 at device_attach+0x3fc
>#6 0xffff0000004f0d20 at device_probe_and_attach+0x80
>#7 0xffff0000004f3294 at bus_generic_new_pass+0x100
>#8 0xffff0000004f3244 at bus_generic_new_pass+0xb0
>#9 0xffff0000004f3244 at bus_generic_new_pass+0xb0
>#10 0xffff0000004edbb8 at bus_set_pass+0x50
>#11 0xffff000000436234 at mi_startup+0x1e0
>#12 0xffff0000000008a8 at virtdone+0x68
>uma_zalloc_debug: zone "malloc-64" with the following non-sleepable locks held:
>exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000ddc678) locked @ /builds/src/freebsd/src/lf/main/sys/dev/led/led.c:295
>stack backtrace:
>#0 0xffff00000052b1a4 at witness_debugger+0x60
>#1 0xffff00000052c438 at witness_warn+0x40c
>#2 0xffff0000007f04fc at uma_zalloc_debug+0x34
>#3 0xffff0000007f0088 at uma_zalloc_arg+0x30
>#4 0xffff000000486958 at malloc+0x90
>#5 0xffff000000920e44 at bcm2835_firmware_property+0x48
>#6 0xffff00000092c1dc at rpi_fw_gpio_pin_set+0xfc
>#7 0xffff0000001df0c4 at led_create_state+0x15c
>#8 0xffff0000001a5fec at gpioled_attach+0x294
>#9 0xffff0000004f11b8 at device_attach+0x3fc
>#10 0xffff0000004f0d20 at device_probe_and_attach+0x80
>#11 0xffff0000004f3294 at bus_generic_new_pass+0x100
>#12 0xffff0000004f3244 at bus_generic_new_pass+0xb0
>#13 0xffff0000004f3244 at bus_generic_new_pass+0xb0
>#14 0xffff0000004edbb8 at bus_set_pass+0x50
>#15 0xffff000000436234 at mi_startup+0x1e0
>#16 0xffff0000000008a8 at virtdone+0x68
>armv8crypto0: CPU lacks AES instructions
>Timecounters tick every 1.000 msec
>usbus0: 5.0Gbps Super Speed USB v3.0
>sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
>sdhci_bcm0-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00003947
>sdhci_bcm0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm0-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm0-slot0: ===========================================
>ugen0.1: <(0x1106) XHCI root HUB> at usbus0
>uhub0 on usbus0
>uhub0: <(0x1106) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
>sdhci_bcm0-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00003947
>sdhci_bcm0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm0-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm0-slot0: ===========================================
>sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm0-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00003947
>sdhci_bcm0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm0-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm0-slot0: ===========================================
>sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm0-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00003947
>sdhci_bcm0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm0-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm0-slot0: ===========================================
>sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm0-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00003947
>sdhci_bcm0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm0-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm0-slot0: ===========================================
>mmc0: No compatible cards found on bus
>iicbus0: <OFW I2C bus> on iichb0
>iic0: <I2C generic I/O> on iicbus0
>mmcsd0: 16GB <SDHC SC16G 8.0 SN 4D52ABA7 MFG 05/2022 by 3 SD> at mmc1 50.0MHz/4bit/65535-block
>bcm2835_cpufreq0: ARM 600MHz, Core 200MHz, SDRAM 400MHz, Turbo OFF
>CPU  0: ARM Cortex-A72 r0p3 affinity:  0
>                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
> Instruction Set Attributes 0 = <CRC32>
> Instruction Set Attributes 1 = <>
> Instruction Set Attributes 2 = <>
>         Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
>         Processor Features 1 = <>
>      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
>      Memory Model Features 1 = <8bit VMID>
>      Memory Model Features 2 = <32bit CCIDX,48bit VA>
>             Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
>             Debug Features 1 = <>
>         Auxiliary Features 0 = <>
>         Auxiliary Features 1 = <>
>AArch32 Instruction Set Attributes 5 = <CRC32,SEVL>
>AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
>AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
>CPU  1: ARM Cortex-A72 r0p3 affinity:  1
>CPU  2: ARM Cortex-A72 r0p3 affinity:  2
>CPU  3: ARM Cortex-A72 r0p3 affinity:  3
>gic0: using for IPIs
>Release APs...done
>TCP_ratelimit: Is now initialized
>WARNING: WITNESS option enabled, expect reduced performance.
>Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
>uhub0: 5 ports with 4 removable, self powered
>Warning: no time-of-day clock registered, system time will not be set accurately
>Dual Console: Serial Primary, Video Secondary
>ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
>uhub1 on uhub0
>uhub1: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.21, addr 1> on usbus0
>uhub1: 4 ports with 4 removable, self powered
>genet0: link state changed to DOWN
>lo0: link state changed to UP
>genet0: link state changed to UP
>Security policy loaded: MAC/ntpd (mac_ntpd)

Actions: View

Attachments on bug 277884: 249398 | 249402