Attachment 27896 Details for Bug 47140 – new_rc

new_rc

new_rc (text/plain), 13.86 KB, created by Mark Hannon on 2003-01-18 11:28:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mark Hannon

Created: 2003-01-18 11:28:52 UTC

Size: 13.86 KB

patch

obsolete

>Copyright (c) 1992-2003 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD 5.0-CURRENT #2: Thu Jan 16 18:13:51 EST 2003
>    mark@tbird.home.lan:/usr/obj/usr/src/sys/GENERIC
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc06e7000.
>Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc06e70a8.
>Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc06e7158.
>Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06e7204.
>Timecounter "i8254"  frequency 1193182 Hz
>Timecounter "TSC"  frequency 1210786757 Hz
>CPU: AMD Athlon(tm) Processor (1210.79-MHz 686-class CPU)
>  Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
>  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
>  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
>real memory  = 268353536 (255 MB)
>avail memory = 253276160 (241 MB)
>Initializing GEOMetry subsystem
>Pentium Pro MTRR support enabled
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>acpi0: <ASUS   A7V-E   > on motherboard
>    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
>Using $PIR table, 9 entries at 0xc00f1690
>acpi0: power button is handled as a fixed feature programming model.
>Timecounter "ACPI-fast"  frequency 3579545 Hz
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
>acpi_cpu0: <CPU> on acpi0
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xfc000000-0xfdffffff at device 0.0 on pci0
>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>pci1: <display, VGA> at device 0.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 7.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 7.1 on pci0
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: at 0x170 irq 15 on atapci0
>uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 7.2 on pci0
>usb0: <VIA 83C572 USB controller> on uhci0
>usb0: USB revision 1.0
>uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhub0: port error, restarting port 1
>uhub0: port error, giving up port 1
>uhub0: port error, restarting port 2
>uhub0: port error, giving up port 2
>uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 7.3 on pci0
>usb1: <VIA 83C572 USB controller> on uhci1
>usb1: USB revision 1.0
>uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>uhub1: port error, restarting port 1
>uhub1: port error, giving up port 1
>uhub1: port error, restarting port 2
>uhub1: port error, giving up port 2
>rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem 0xed800000-0xed8000ff irq 9 at device 11.0 on pci0
>rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
>rl0: Ethernet address: 00:20:18:8d:b0:25
>miibus0: <MII bus> on rl0
>rlphy0: <RealTek internal media interface> on miibus0
>rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>pcm0: <Creative EMU10K1> port 0xa000-0xa01f irq 10 at device 15.0 on pci0
>fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/8 bytes threshold
>plip0: <PLIP network interface> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>sio0 port 0x3f8-0x3ff irq 4 on acpi0
>sio0: type 16550A
>sio1 port 0x2f8-0x2ff irq 3 on acpi0
>sio1: type 16550A
>atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>kbd0 at atkbd0
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model IntelliMouse, device ID 3
>pmtimer0 on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounters tick every 10.000 msec
>acpi_cpu: CPU throttling available, 16 steps from 100% to 6.2%
>ad0: 38172MB <QUANTUM FIREBALLlct20 40> [77557/16/63] at ata0-master UDMA100
>acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-116 0109> at ata1-master PIO4
>acd1: CD-RW <RICOH CD-R/RW MP7083A> at ata1-slave PIO4
>MBREXT Slice 5 on ad0s2:
>[0] f:00 typ:11 s(CHS):218/1/129 e(CHS):255/254/255 s:63 l:54990432
>[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>Mounting root from ufs:/dev/ad0s3a
>Loading configuration files.
>/etc/rc: DEBUG: checkyesno: devd_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: devd_enable is set to NO.
>hw.bus.devctl_disable: 
>0
> -> 
>1
>
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>Entropy harvesting:
>/etc/rc: DEBUG: checkyesno: harvest_interrupt is set to YES.
> interrupts
>/etc/rc: DEBUG: checkyesno: harvest_ethernet is set to YES.
> ethernet
>/etc/rc: DEBUG: checkyesno: harvest_p_to_p is set to YES.
> point_to_point
>.
>lock order reversal
> 1st 0xc2707068 process lock (process lock) @ /usr/src/sys/kern/kern_descrip.c:2100
> 2nd 0xc2703034 filedesc structure (filedesc structure) @ /usr/src/sys/kern/kern_descrip.c:2107
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: checkyesno: start_vinum is set to NO.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>swapon: adding /dev/ad0s3b as swap device
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>Starting file system checks:
>/etc/rc: DEBUG: checkyesno: background_fsck is set to YES.
>/dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3a: clean, 95213 free (205 frags, 11876 blocks, 0.2% fragmentation)
>/dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3e: clean, 128898 free (74 frags, 16103 blocks, 0.1% fragmentation)
>/dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3f: clean, 1126417 free (28633 frags, 137223 blocks, 1.3% fragmentation)
>/dev/ad0s3d: FILESYSTEM CLEAN; SKIPPING CHECKS
>/dev/ad0s3d: clean, 123636 free (1212 frags, 15303 blocks, 0.9% fragmentation)
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: checkyesno: atm_enable is set to NO.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: checkyesno: ipsec_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: ipfilter_enable is set to NO.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: checkyesno: pccard_enable is set to NO.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>Doing initial network setup:
> host.conf
> hostname
> domain
>.
>rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>	inet6 fe80::220:18ff:fe8d:b025%rl0 prefixlen 64 scopeid 0x1 
>	inet 192.168.1.5 netmask 0xffffff00 broadcast 192.168.1.255
>	ether 00:20:18:8d:b0:25
>	media: Ethernet autoselect (100baseTX <full-duplex>)
>	status: active
>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>	inet6 ::1 prefixlen 128 
>	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 
>	inet 127.0.0.1 netmask 0xff000000 
>/etc/rc.d/ipfilter: DEBUG: checkyesno: ipfilter_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: firewall_enable is set to NO.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>Additional routing options:
>.
>/etc/rc: DEBUG: checkyesno: ipv6_firewall_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: ipv6_enable is set to NO.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>Mounting NFS file systems:
>.
>/etc/rc: DEBUG: checkyesno: lomac_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: syslogd_enable is set to YES.
>/etc/rc: DEBUG: checkyesno: named_enable is set to NO.
>Starting syslogd.
>/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/syslogd -s 
>Jan 18 22:22:32 tbird syslogd: kernel boot file is /boot/kernel/kernel
>/etc/rc: DEBUG: checkyesno: ipmon_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: isdn_enable is set to NO.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: No dump device. Quitting.
>/etc/rc: DEBUG: checkyesno: named_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: ntpdate_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: rpcbind_enable is set to YES.
>Starting rpcbind.
>/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/rpcbind  
>/etc/rc: DEBUG: checkyesno: nis_ypxfrd_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: nis_server_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: rpc_ypupdated_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: nis_client_enable is set to YES.
>/etc/rc: DEBUG: checkyesno: rpcbind_enable is set to YES.
>Starting ypbind.
>/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/ypbind  
>/etc/rc: DEBUG: checkyesno: nis_ypset_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: nis_yppasswdd_enable is set to NO.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: checkyesno: accounting_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: nfs_client_enable is set to YES.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>NFS access cache time=2
>/etc/rc: DEBUG: checkyesno: amd_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: clear_tmp_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: dmesg_enable is set to YES.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: checkyesno: ipnat_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: ipxrouted_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: kerberos_stash is set to NO.
>/etc/rc: DEBUG: checkyesno: kerberos4_server_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: kerberos5_server_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: kerberos_stash is set to NO.
>/etc/rc: DEBUG: checkyesno: kadmind4_server_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: kadmind5_server_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: keyserv_enable is set to NO.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: checkyesno: ldconfig_insecure is set to NO.
>ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
>a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
>/etc/rc: DEBUG: checkyesno: enable_quotas is set to NO.
>/etc/rc: DEBUG: checkyesno: nfs_server_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: mountd_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: nfs_server_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: rpc_statd_enable is set to YES.
>/etc/rc: DEBUG: checkyesno: nfs_server_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: nfs_client_enable is set to YES.
>Starting statd.
>/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/rpc.statd  
>/etc/rc: DEBUG: checkyesno: rpc_lockd_enable is set to YES.
>/etc/rc: DEBUG: checkyesno: nfs_server_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: nfs_client_enable is set to YES.
>Starting lockd.
>/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/rpc.lockd  
>/etc/rc: DEBUG: checkyesno: pppoed_enable is set to NO.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: checkyesno: usbd_enable is set to YES.
>Starting usbd.
>/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/usbd  
>/etc/rc: DEBUG: checkyesno: timed_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: apm_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: apmd_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: bootparamd_enable is set to NO.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>Starting local daemons:
>.
>/etc/rc: DEBUG: checkyesno: lpd_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: update_motd is set to YES.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>Updating motd.
>/etc/rc: DEBUG: checkyesno: mroute6d_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: mrouted_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: ntpd_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: rarpd_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: ipv6_router_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: router_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: rtadvd_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: rwhod_enable is set to NO.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>Configuring syscons:
> blanktime
>.
>/etc/rc: DEBUG: checkyesno: sshd_enable is set to YES.
>Starting sshd.
>/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/sshd  
>/etc/rc: DEBUG: checkyesno: sendmail_enable is set to YES.
>Starting sendmail.
>/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/sendmail -L sm-mta -bd -q30m 
>/etc/rc: DEBUG: checkyesno: sendmail_enable is set to YES.
>/etc/rc: DEBUG: checkyesno: sendmail_outbound_enable is set to YES.
>/etc/rc: DEBUG: checkyesno: sendmail_msp_queue_enable is set to YES.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>Initial i386 initialization:
>/etc/rc: DEBUG: checkyesno: ibcs2_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: xtend_enable is set to NO.
>.
>Additional ABI support:
>/etc/rc: DEBUG: checkyesno: sysvipc_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: linux_enable is set to YES.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
> linux
>/etc/rc: DEBUG: checkyesno: svr4_enable is set to NO.
>.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>Local package initialization:
> xfs
> gdm
>.
>Additional TCP options:
>.
>/etc/rc: DEBUG: checkyesno: moused_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: inetd_enable is set to NO.
>/etc/rc: DEBUG: checkyesno: cron_enable is set to YES.
>Starting cron.
>/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/cron  
>/etc/rc: DEBUG: checkyesno: background_fsck is set to YES.
>/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
>Starting background file system checks in 60 seconds.
>
>Sat Jan 18 22:22:38 EST 2003

Actions: View

Attachments on bug 47140: 27895 | 27896 | 27897 | 27898 | 27899 | 27900