Attachment 32341 Details for Bug 53481 – dmesg

dmesg

dmesg (text/plain), 4.85 KB, created by plexus on 2003-06-19 07:20:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: plexus

Created: 2003-06-19 07:20:06 UTC

Size: 4.85 KB

patch

obsolete

>Copyright (c) 1992-2003 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD 5.1-RELEASE #0: Sat Jun 14 11:51:54 CEST 2003
>    root@warpgondel2.xshare.com:/usr/obj/usr/RELENG_5_1/sys/GENERIC
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d4000.
>Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06d41f4.
>Timecounter "i8254"  frequency 1193182 Hz
>Timecounter "TSC"  frequency 148245937 Hz
>CPU: Intel Pentium III (148.25-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
>  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
>real memory  = 402587648 (383 MB)
>avail memory = 383623168 (365 MB)
>Pentium Pro MTRR support enabled
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>acpi0: <PTLTD    RSDT  > on motherboard
>pcibios: BIOS version 2.10
>Using $PIR table, 11 entries at 0xc00fdee0
>acpi0: power button is handled as a fixed feature programming model.
>Timecounter "ACPI-safe"  frequency 3579545 Hz
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
>acpi_cpu0: <CPU> on acpi0
>acpi_tz0: <thermal zone> on acpi0
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_button0: <Sleep Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>pci1: <display, VGA> at device 0.0 (no driver attached)
>cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 2.0 on pci0
>cardbus0: <CardBus bus> on cbb0
>pccard0: <16-bit PCCard bus> on cbb0
>cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 2.1 on pci0
>cardbus1: <CardBus bus> on cbb1
>pccard1: <16-bit PCCard bus> on cbb1
>xl0: <3Com 3c556B Fast Etherlink XL> port 0-0xff at device 3.0 on pci0
>xl0: chip is in D3 power mode -- setting to D0
>xl0: couldn't map ports/memory
>device_probe_and_attach: xl0 attach returned 6
>pci0: <simple comms> at device 3.1 (no driver attached)
>pci0: <multimedia, audio> at device 5.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 7.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel PIIX4 UDMA33 controller> port 0x1c00-0x1c0f at device 7.1 on pci0
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: at 0x170 irq 15 on atapci0
>uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1c20-0x1c3f irq 11 at device 7.2 on pci0
>usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
>usb0: USB revision 1.0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>ums0: Logitech USB-PS/2 Mouse M-BA47, rev 1.00/1.20, addr 2, iclass 3/1
>ums0: 4 buttons and Z dir.
>pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
>atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>kbd0 at atkbd0
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model Generic PS/2 mouse, device ID 0
>fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>sio0 port 0x3f8-0x3ff irq 4 on acpi0
>sio0: type 16550A
>ppc0 port 0x3bc-0x3c3 irq 7 on acpi0
>ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
>ppbus0: <Parallel port bus> on ppc0
>plip0: <PLIP network interface> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
>acpi_cmbat0: <Control method Battery> on acpi0
>acpi_cmbat1: <Control method Battery> on acpi0
>acpi_acad0: <AC adapter> on acpi0
>orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xcc000-0xcc7ff,0xc0000-0xcbfff on isa0
>pmtimer0 on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounters tick every 10.000 msec
>acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
>system power profile changed to 'economy'
>ad0: 38154MB <IC25N040ATCS04-0> [77520/16/63] at ata0-master UDMA33
>acd0: DVD-ROM <MATSHITADVD-ROM SR-8174> at ata1-master PIO4
>Mounting root from ufs:/dev/ad0s1a
>    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
>    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.EC__.BAT1._STA] (Node 0xc3337080), AE_ERROR
>    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.EC__.BAT1._STA] (Node 0xc3337080), AE_ERROR
>    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
>    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.EC__.AC__._PSR] (Node 0xc3336ee0), AE_ERROR

Actions: View

Attachments on bug 53481: 32341