Attachment 34017 Details for Bug 55440 – wi.4.diff

[patch] wi.4.diff

wi.4.diff (text/plain), 2.61 KB, created by Lukas Ertl on 2003-08-10 12:20:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Lukas Ertl

Created: 2003-08-10 12:20:16 UTC

Size: 2.61 KB

patch

obsolete

>Index: share/man/man4/wi.4
>===================================================================
>RCS file: /usr/local/bsdcvs/src/share/man/man4/wi.4,v
>retrieving revision 1.51
>diff -u -r1.51 wi.4
>--- share/man/man4/wi.4	19 Jul 2003 06:19:43 -0000	1.51
>+++ share/man/man4/wi.4	10 Aug 2003 11:04:50 -0000
>@@ -72,7 +72,7 @@
> Except for the Lucent WaveLAN Bronze cards, all cards supported by the
> .Nm
> driver support WEP for encryption.
>-To enable encryption, use the
>+To enable encryption, use
> .Xr ifconfig 8
> as shown below.
> .Pp
>@@ -94,7 +94,7 @@
> .Dq "legacy Lucent ad-hoc mode" ,
> predates the IEEE 802.11 specification and so may not interoperate
> with cards from different vendors.
>-The standardized point-to-point mode, is called IBSS (or confusingly
>+The standardized point-to-point mode is called IBSS (or confusingly
> just ad-hoc mode), but is not supported by cards with very old
> firmware revisions.
> If your cards supports IBSS mode, it is recommended that you use it in
>@@ -247,9 +247,10 @@
> Wisecom Wireless LAN PCI Adapter
> .El
> .Pp
>-The following addapters have the same model numbers as those listed
>+The following adapters have the same model numbers as those listed
> above, but might not work if the actual card is after the change away
>-from the Prism family.
>+from the Prism family:
>+.Pp
> .Bl -item -compact
> .It
> DLink DWL520
>@@ -293,7 +294,8 @@
> Create a host-based access point with WEP enabled (Prism only):
> .Bd -literal -offset indent
> ifconfig wi0 inet 192.168.0.10 netmask 0xffffff00 ssid my_ap \e
>-	wepmode on wepkey 0x1234567890 media DS/11Mbps mediaopt hostap
>+	wepmode on wepkey 0x1234567890 media DS/11Mbps \e
>+	mediaopt hostap
> .Ed
> .Pp
> Create a host-based wireless bridge to fxp0 (Prism only):
>@@ -309,14 +311,14 @@
> .Sh DIAGNOSTICS
> .Bl -diag
> .It "wi%d: init failed"
>-The WaveLAN card failed to come ready after an initialization command
>+The WaveLAN card failed to become ready after an initialization command
> was issued.
> .It "wi%d: failed to allocate %d bytes on NIC"
> The driver was unable to allocate memory for transmit frames in the
> NIC's on-board RAM.
> This can also be an indication of an incorrectly configured interrupt.
> .It "wi%d: device timeout"
>-The WaveLAN failed to generate an interrupt to acknowledge a transmit
>+The WaveLAN card failed to generate an interrupt to acknowledge a transmit
> command.
> .El
> .Sh SEE ALSO
>@@ -374,7 +376,7 @@
> .Pp
> Lucent cards prior to firmware version 6.0.6 do not support IBSS
> mode.
>-These cards support only the pre 802.11 mode known as
>+These cards support only the pre-802.11 mode known as
> .Dq "demo ad-hoc mode"
> which does not interoperate with stations in IBSS mode.
> .Pp

Actions: View | Diff

Attachments on bug 55440: 34017