<listitem><para>Grab a copy of <filename>ports.tar.gz</filename>

      <listitem><para>Grab a copy of <filename>ports.tar.gz</filename>

        and extract it into the <filename>ports</filename> directory 

        and extract it into the <filename>ports</filename> directory 

        <filename>doit.sh</filename> and the

        <filename>doit.sh</filename> and the

      <listitem><para>Remove the packages/distfiles directories or

      <listitem><para>Remove the packages/distfiles directories or

        symlinks.  Bento has these as symlinks and you will have mixed

        symlinks.  Bento has these as symlinks and you will have mixed

    <para>After going through this the first time if you are lucky

    <para>After going through this the first time if you are lucky

      enough that all of the required packages built and fit on each

      enough that all of the required packages built and fit on each

      disc.  All you need to do is set <varname>fake</varname> to 0 in

      disc.  All you need to do is set <varname>fake</varname> to 0 in

      <command>./doit.sh</command>.  The second and subsequent times

      <command>./doit.sh</command>.  The second and subsequent times

      around it will skip steps 1-5 above.  If you want to re-run any

      around it will skip steps 1-5 above.  If you want to re-run any

      of those steps refer to <filename>doit.sh</filename> for which files

      of those steps refer to <filename>doit.sh</filename> for which files

              <paramdef>struct ifnet

              <paramdef>struct ifnet

                *<parameter>ifnet</parameter></paramdef>

                *<parameter>ifnet</parameter></paramdef>

              <paramdef>struct label

              <paramdef>struct label

            </funcprototype>

            </funcprototype>

          </funcsynopsis>

          </funcsynopsis>

  <filename>/dev/ttyd0</filename> and <filename>/dev/cuaa0</filename>.</para>

  <filename>/dev/ttyd0</filename> and <filename>/dev/cuaa0</filename>.</para>

<para>By contrast, the networking devices, such as

<para>By contrast, the networking devices, such as

<para>In MS-DOS, the first floppy drive is referred to as

<para>In MS-DOS, the first floppy drive is referred to as

  <devicename>a:</devicename>.  In FreeBSD it is

  <devicename>a:</devicename>.  In FreeBSD it is

	  <screen>&prompt.root; <userinput>atacontrol attach 3</userinput>

	  <screen>&prompt.root; <userinput>atacontrol attach 3</userinput>

Master:  ad6 <MAXTOR 6L080J4/A93.0500> ATA/ATAPI rev 5

Master:  ad6 <MAXTOR 6L080J4/A93.0500> ATA/ATAPI rev 5

Slave:   no device present</screen>

Slave:   no device present</screen>

	<step>

	<step>

	  <para>Rebuild the array:</para>

	  <para>Rebuild the array:</para>

      <para>For more details, please refer to &man.md.4; manual

      <para>For more details, please refer to &man.md.4; manual

	page.</para>

	page.</para>

    <sect2 id="disks-md-freebsd5">

    <sect2 id="disks-md-freebsd5">

      <title>Memory-Based File System under FreeBSD&nbsp;5.X</title>

      <title>Memory-Based File System under FreeBSD&nbsp;5.X</title>

	  it is recommended that such scripts be run manually while

	  it is recommended that such scripts be run manually while

	  providing the password via the console or &man.ssh.1;.</para>

	  providing the password via the console or &man.ssh.1;.</para>

      </sect3>

      </sect3>

      <sect2>

      <sect2>

	<title>Cryptographic Protections Employed by gbde</title>

	<title>Cryptographic Protections Employed by gbde</title>

		<entry>Name</entry>

		<entry>Name</entry>

		<entry>Value</entry>

		<entry>Value</entry>

	      </row>

	      </row>

	    <tbody>

	    <tbody>

	      <row>

	      <row>

		<entry>ztta/dynpro_area</entry>

		<entry>ztta/dynpro_area</entry>

		<entry>Name</entry>

		<entry>Name</entry>

		<entry>Value</entry>

		<entry>Value</entry>

	      </row>

	      </row>

	    <tbody>

	    <tbody>

	      <row>

	      <row>

		<entry>rdisp/ROLL_MAXFS</entry>

		<entry>rdisp/ROLL_MAXFS</entry>

	  <application>sendmail</application>'s startup options is

	  <application>sendmail</application>'s startup options is

	  available from the &man.rc.sendmail.8; manual page.</para>

	  available from the &man.rc.sendmail.8; manual page.</para>

      </sect3>

      </sect3>

    <sect2>

    <sect2>

      <title>Running Your New MTA on Boot</title>

      <title>Running Your New MTA on Boot</title>

	  <para>The line of development for FreeBSD-2.2.X, also known

	  <para>The line of development for FreeBSD-2.2.X, also known

	    as 2.2-STABLE.  This branch is mostly obsolete.</para>

	    as 2.2-STABLE.  This branch is mostly obsolete.</para>

	</listitem>

	</listitem>

    </variablelist>

    </variablelist>

    </sect2>

    </sect2>

        design.  However, once

        design.  However, once

        you get used to the command line options and the key-stroke

        you get used to the command line options and the key-stroke

        controls, it works very well.</para>

        controls, it works very well.</para>

      <sect4 id="video-mplayer-building">

      <sect4 id="video-mplayer-building">

        <title>Building MPlayer</title>

        <title>Building MPlayer</title>

            role="ipaddr">W.X.Y.Z</hostid> it will need to

            role="ipaddr">W.X.Y.Z</hostid> it will need to

            <quote>unencapsulated</quote>, and delivered to <hostid

            <quote>unencapsulated</quote>, and delivered to <hostid

            role="ipaddr">192.168.2.1</hostid>.</para>

            role="ipaddr">192.168.2.1</hostid>.</para>

      </orderedlist>

      </orderedlist>

      <para>You can think of this as requiring a <quote>tunnel</quote>

      <para>You can think of this as requiring a <quote>tunnel</quote>

	<listitem>

	<listitem>

	  <para>The root volume must not contain more than one

	  <para>The root volume must not contain more than one

	    concatenated subdisk per plex.</para>

	    concatenated subdisk per plex.</para>

      </itemizedlist>

      </itemizedlist>

      <para>Note that it is desirable and possible that there are

      <para>Note that it is desirable and possible that there are