Attachment 35999 Details for Bug 57909 – dmesg.RELENG_5_1.working-pcm

dmesg.RELENG_5_1.working-pcm

dmesg.RELENG_5_1.working-pcm (text/plain; charset=us-ascii), 7.13 KB, created by Stefan Walter on 2004-01-17 11:00:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stefan Walter

Created: 2004-01-17 11:00:12 UTC

Size: 7.13 KB

patch

obsolete

>Copyright (c) 1992-2003 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD 5.1-RELEASE #0: Fri Aug 22 13:16:42 CEST 2003
>    root@kyuzo.dunkelkammer.void:/usr/obj/usr/src/sys/GARUDA
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc05ea000.
>Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc05ea1cc.
>Preloaded splash_image_data "/boot/splash.bmp" at 0xc05ea27c.
>Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05ea2cc.
>Timecounter "i8254"  frequency 1193182 Hz
>Timecounter "TSC"  frequency 600024122 Hz
>CPU: Intel(R) Pentium(R) M processor 1300MHz (600.02-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
>  Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
>real memory  = 259260416 (247 MB)
>avail memory = 245399552 (234 MB)
>Pentium Pro MTRR support enabled
>VESA: v3.0, 8000k memory, flags:0x1, mode table:0xc04b1d40 (1000040)
>VESA: Intel(r)852MG/852MGE/855MG/855MGE Graphics Chip Accelerated VGA BIOS
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>acpi0: <A M I  OEMRSDT > on motherboard
>acpi0: power button is handled as a fixed feature programming model.
>Timecounter "ACPI-fast"  frequency 3579545 Hz
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
>acpi_cpu0: <CPU> on acpi0
>acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
>acpi_tz0: _CRT value is absurd, ignored (255.0C)
>acpi_tz0: _PSV value is absurd, ignored (255.0C)
>acpi_tz0: _ACx value is absurd, ignored (255.0C)
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: <base peripheral> at device 0.1 (no driver attached)
>pci0: <base peripheral> at device 0.3 (no driver attached)
>agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0xdc00-0xdc07 mem 0xffa80000-0xffafffff,0xf0000000-0xf7ffffff irq 5 at device 2.0 on pci0
>agp0: detected 8060k stolen memory
>agp0: aperture size is 128M
>pci0: <display> at device 2.1 (no driver attached)
>uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd480-0xd49f irq 5 at device 29.0 on pci0
>usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
>usb0: USB revision 1.0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
>ums0: 3 buttons and Z dir.
>uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd800-0xd81f irq 5 at device 29.1 on pci0
>usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
>usb1: USB revision 1.0
>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd880-0xd89f irq 5 at device 29.2 on pci0
>usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
>usb2: USB revision 1.0
>uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub2: 2 ports with 2 removable, self powered
>pci0: <serial bus, USB> at device 29.7 (no driver attached)
>pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>cbb0: <RF5C476 PCI-CardBus Bridge> at device 3.0 on pci1
>cardbus0: <CardBus bus> on cbb0
>pccard0: <16-bit PCCard bus> on cbb0
>pcib1: slot 3 INTA is routed to irq 5
>cbb1: <RF5C476 PCI-CardBus Bridge> at device 3.1 on pci1
>cardbus1: <CardBus bus> on cbb1
>pccard1: <16-bit PCCard bus> on cbb1
>pcib1: slot 3 INTB is routed to irq 5
>fwohci0: <Ricoh R5C552> mem 0xff7ef000-0xff7ef7ff irq 5 at device 3.2 on pci1
>fwohci0: OHCI version 1.0 (ROM=1)
>fwohci0: No. of Isochronous channel is 4.
>fwohci0: EUI64 00:e0:18:00:03:0b:63:f0
>fwohci0: Phy 1394a available S400, 2 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>if_fwe0: <Ethernet over FireWire> on firewire0
>if_fwe0: Fake Ethernet address: 02:e0:18:0b:63:f0
>sbp0: <SBP2/SCSI over firewire> on firewire0
>fwohci0: Initiate bus reset
>rl0: <RealTek 8139 10/100BaseTX> port 0xc800-0xc8ff mem 0xff7efc00-0xff7efcff irq 5 at device 4.0 on pci1
>rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
>rl0: Ethernet address: 00:0c:6e:68:fd:c0
>miibus0: <MII bus> on rl0
>rlphy0: <RealTek internal media interface> on miibus0
>rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>pci1: <network> at device 5.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH4 UDMA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: at 0x170 irq 15 on atapci0
>pcm0: <Intel 82801DB (ICH4)> port 0xe100-0xe13f,0xe000-0xe0ff at device 31.5 on pci0
>pcib0: slot 31 INTB is routed to irq 5
>pcm0: <SigmaTel STAC9721/23 AC97 Codec>
>pci0: <simple comms> at device 31.6 (no driver attached)
>acpi_button0: <Sleep Button> on acpi0
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_acad0: <AC adapter> on acpi0
>acpi_cmbat0: <Control method Battery> on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>kbd0 at atkbd0
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model Generic PS/2 mouse, device ID 0
>acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
>sio0: configured irq 3 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0 port 0x2f8-0x2ff irq 3 drq 1 on acpi0
>sio0: type 16550A
>ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/8 bytes threshold
>ppbus0: <Parallel port bus> on ppc0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0
>pmtimer0 on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <12 virtual consoles, flags=0x300>
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounters tick every 10.000 msec
>IPsec: Initialized Security Association Processing.
>fwohci0: BUS reset
>fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
>firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
>firewire0: bus manager 0 (me)
>acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
>system power profile changed to 'economy'
>ad0: 38154MB <IC25N040ATMR04-0> [77520/16/63] at ata0-master UDMA100
>acpi_tz0: _CRT value is absurd, ignored (255.0C)
>acpi_tz0: _PSV value is absurd, ignored (245.0C)
>acpi_tz0: _ACx value is absurd, ignored (255.0C)
>acpi_tz0: _CRT value is absurd, ignored (255.0C)
>acpi_tz0: _PSV value is absurd, ignored (245.0C)
>acpi_tz0: _ACx value is absurd, ignored (255.0C)
>acd0: CD-RW <TOSHIBA DVD-ROM SD-R2312> at ata1-master UDMA33
>Mounting root from ufs:/dev/ad0s1a
>cd0 at ata1 bus 0 target 0 lun 0
>cd0: <TOSHIBA DVD-ROM SD-R2312 X708> Removable CD-ROM SCSI-0 device 
>cd0: 33.000MB/s transfers
>cd0: Attempt to query device size failed: NOT READY, Medium not present
>acpi_tz0: _CRT value is absurd, ignored (255.0C)
>acpi_tz0: _PSV value is absurd, ignored (245.0C)
>acpi_tz0: _ACx value is absurd, ignored (255.0C)
>acpi_tz0: _CRT value is absurd, ignored (255.0C)
>acpi_tz0: _PSV value is absurd, ignored (245.0C)
>acpi_tz0: _ACx value is absurd, ignored (255.0C)

Actions: View

Attachments on bug 57909: 35999