Attachment 37600 Details for Bug 59792 – 5.2-install-dmesg.cap

5.2-install-dmesg.cap

5.2-install-dmesg.cap (text/plain; charset=us-ascii), 25.10 KB, created by Simon L. B. Nielsen on 2003-11-29 21:31:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Simon L. B. Nielsen

Created: 2003-11-29 21:31:33 UTC

Size: 25.10 KB

patch

obsolete

>SMAP type=01 base=0000000000000000 len=000000000009fc00
>SMAP type=01 base=000000000009fc00 len=0000000000000400
>SMAP type=02 base=00000000000f0000 len=0000000000010000
>SMAP type=02 base=00000000ffff0000 len=0000000000010000
>SMAP type=01 base=0000000000100000 len=000000000fef0000
>SMAP type=03 base=000000000fff3000 len=000000000000d000
>SMAP type=04 base=000000000fff0000 len=0000000000003000
>Copyright (c) 1992-2003 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD 5.2-BETA-20031129-JPSNAP #0: Sat Nov 29 02:47:57 GMT 2003
>    root@ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc0eb0000.
>Preloaded mfs_root "/boot/mfsroot" at 0xc0eb0200.
>Calibrating clock(s) ... i8254 clock: 1193252 Hz
>CLK_USE_I8254_CALIBRATION not specified - using default frequency
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Calibrating TSC clock ... TSC clock: 567959271 Hz
>CPU: Intel Celeron (567.96-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
>  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
>real memory  = 268369920 (255 MB)
>Physical memory chunk(s):
>0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
>0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
>0x0000000001029000 - 0x000000000fb49fff, 246550528 bytes (60193 pages)
>avail memory = 246972416 (235 MB)
>bios32: Found BIOS32 Service Directory header at 0xc00faed0
>bios32: Entry = 0xfb340 (c00fb340)  Rev = 0  Len = 1
>pcibios: PCI BIOS entry at 0xf0000+0xb370
>pnpbios: Found PnP BIOS data at 0xc00fbd60
>pnpbios: Entry = f0000:bd90  Rev = 1.0
>Other BIOS signatures found:
>wlan: <802.11 Link Layer>
>null: <null device, zero device>
>random: <entropy source>
>mem: <memory & I/O>
>Pentium Pro MTRR support enabled
>acpi0: <VIA692 AWRDACPI> on motherboard
>pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000060
>pci_open(1a):	mode1res=0x80000000 (0x80000000)
>pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=06911106)
>pcibios: BIOS version 2.10
>Using $PIR table, 7 entries at 0xc00fdbf0
>PCI-Only Interrupts: 5 10 11 12
>Location  Bus Device Pin  Link  IRQs
>slot 1      0   15    A   0x01  3 4 5 7 9 10 11 12 14 15
>slot 1      0   15    B   0x02  3 4 5 7 9 10 11 12 14 15
>slot 1      0   15    C   0x03  3 4 5 7 9 10 11 12 14 15
>slot 1      0   15    D   0x05  3 4 5 7 9 10 11 12 14 15
>slot 2      0   13    A   0x02  3 4 5 7 9 10 11 12 14 15
>slot 2      0   13    B   0x03  3 4 5 7 9 10 11 12 14 15
>slot 2      0   13    C   0x05  3 4 5 7 9 10 11 12 14 15
>slot 2      0   13    D   0x01  3 4 5 7 9 10 11 12 14 15
>slot 3      0   11    A   0x03  3 4 5 7 9 10 11 12 14 15
>slot 3      0   11    B   0x05  3 4 5 7 9 10 11 12 14 15
>slot 3      0   11    C   0x01  3 4 5 7 9 10 11 12 14 15
>slot 3      0   11    D   0x02  3 4 5 7 9 10 11 12 14 15
>slot 4      0    9    A   0x05  3 4 5 7 9 10 11 12 14 15
>slot 4      0    9    B   0x01  3 4 5 7 9 10 11 12 14 15
>slot 4      0    9    C   0x02  3 4 5 7 9 10 11 12 14 15
>slot 4      0    9    D   0x03  3 4 5 7 9 10 11 12 14 15
>slot 5      0   17    A   0x05  3 4 5 7 9 10 11 12 14 15
>slot 5      0   17    B   0x01  3 4 5 7 9 10 11 12 14 15
>slot 5      0   17    C   0x02  3 4 5 7 9 10 11 12 14 15
>slot 5      0   17    D   0x03  3 4 5 7 9 10 11 12 14 15
>embedded    0    1    A   0x01  3 4 5 7 9 10 11 12 14 15
>embedded    0    1    B   0x02  3 4 5 7 9 10 11 12 14 15
>embedded    0    1    C   0x03  3 4 5 7 9 10 11 12 14 15
>embedded    0    1    D   0x05  3 4 5 7 9 10 11 12 14 15
>embedded    0    7    C   0x03  3 4 5 7 9 10 11 12 14 15
>embedded    0    7    D   0x05  3 4 5 7 9 10 11 12 14 15
>acpi_bus_number: root bus has no _BBN, assuming 0
>AcpiOsDerivePciId: bus 0 dev 7 func 0
>acpi0: Power Button (fixed)
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_bus_number: root bus has no _BBN, assuming 0
>AcpiOsDerivePciId: bus 0 dev 7 func 0
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
>acpi_cpu0: <CPU> on acpi0
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
>---- initial configuration ------------------------
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.0
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.1
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.2
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.3
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.0
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.1
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.2
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.3
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.0
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.1
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.2
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.3
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.0
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.1
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.2
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.3
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.17.0
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.17.1
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.17.2
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.17.3
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.0
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.1
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.2
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.3
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.0
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.1
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.2
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.3
>---- before setting priority for links ------------
>---- before fixup boot-disabled links -------------
>---- after fixup boot-disabled links --------------
>---- arbitrated configuration ---------------------
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.0
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.1
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.2
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.15.3
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.0
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.1
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.2
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.13.3
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.0
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.1
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.2
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.11.3
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.0
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.1
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.2
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.9.3
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.17.0
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.17.1
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.17.2
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.17.3
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.0
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.1
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.2
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.7.3
>\_SB_.PCI0.LNKA irq  12: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.0
>\_SB_.PCI0.LNKB irq  10: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.1
>\_SB_.PCI0.LNKC irq   5: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.2
>\_SB_.PCI0.LNKD irq  11: [  1  3  4  5  6  7 10 11 12 14 15] low,level,sharable 0.1.3
>pci0: <ACPI PCI bus> on pcib0
>pci0: physical bus=0
>	map[10]: type 3, range 32, base d0000000, size 26, enabled
>found->	vendor=0x1106, dev=0x0691, revid=0x44
>	bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1106, dev=0x8598, revid=0x00
>	bus=0, slot=1, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1106, dev=0x0686, revid=0x22
>	bus=0, slot=7, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	map[20]: type 4, range 32, base 0000b000, size  4, enabled
>found->	vendor=0x1106, dev=0x0571, revid=0x10
>	bus=0, slot=7, func=1
>	class=01-01-8a, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	powerspec 2  supports D0 D3  current D0
>	map[20]: type 4, range 32, base 0000b400, size  5, enabled
>pcib0: matched entry for 0.7.INTD (source \_SB_.PCI0.LNKD)
>pcib0: slot 7 INTD is routed to irq 11
>found->	vendor=0x1106, dev=0x3038, revid=0x10
>	bus=0, slot=7, func=2
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=d, irq=11
>	powerspec 2  supports D0 D3  current D0
>	map[20]: type 4, range 32, base 0000b800, size  5, enabled
>pcib0: matched entry for 0.7.INTD (source \_SB_.PCI0.LNKD)
>pcib0: slot 7 INTD is routed to irq 11
>found->	vendor=0x1106, dev=0x3038, revid=0x10
>	bus=0, slot=7, func=3
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=d, irq=11
>	powerspec 2  supports D0 D3  current D0
>found->	vendor=0x1106, dev=0x3057, revid=0x30
>	bus=0, slot=7, func=4
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type 4, range 32, base 0000bc00, size  8, enabled
>	map[14]: type 4, range 32, base 0000c000, size  2, enabled
>	map[18]: type 4, range 32, base 0000c400, size  2, enabled
>pcib0: matched entry for 0.7.INTC (source \_SB_.PCI0.LNKC)
>pcib0: slot 7 INTC is routed to irq 5
>found->	vendor=0x1106, dev=0x3058, revid=0x20
>	bus=0, slot=7, func=5
>	class=04-01-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=5
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type 4, range 32, base 0000cc00, size  6, enabled
>pcib0: matched entry for 0.11.INTA (source \_SB_.PCI0.LNKC)
>pcib0: slot 11 INTA is routed to irq 5
>found->	vendor=0x1274, dev=0x5880, revid=0x02
>	bus=0, slot=11, func=0
>	class=04-01-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
>	intpin=a, irq=5
>	powerspec 1  supports D0 D2 D3  current D3
>	map[10]: type 4, range 32, base 0000d000, size  7, enabled
>	map[14]: type 1, range 32, base db004000, size  7, enabled
>pcib0: matched entry for 0.13.INTA (source \_SB_.PCI0.LNKB)
>pcib0: slot 13 INTA is routed to irq 10
>found->	vendor=0x10b7, dev=0x9055, revid=0x30
>	bus=0, slot=13, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
>	intpin=a, irq=10
>	powerspec 1  supports D0 D1 D2 D3  current D0
>	map[10]: type 4, range 32, base 0000d400, size  3, enabled
>	map[14]: type 4, range 32, base 0000d800, size  2, enabled
>	map[18]: type 4, range 32, base 0000dc00, size  3, enabled
>	map[1c]: type 4, range 32, base 0000e000, size  2, enabled
>	map[20]: type 4, range 32, base 0000e400, size  4, enabled
>	map[24]: type 1, range 32, base db000000, size 14, enabled
>pcib0: matched entry for 0.17.INTA (source \_SB_.PCI0.LNKD)
>pcib0: slot 17 INTA is routed to irq 11
>found->	vendor=0x105a, dev=0x4d68, revid=0x02
>	bus=0, slot=17, func=0
>	class=01-80-85, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0430, cachelnsz=8 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns)
>	intpin=a, irq=11
>	powerspec 1  supports D0 D1 D3  current D0
>agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
>agp0: allocating GATT for aperture of size 256M
>pcib1: <PCI-PCI bridge> at device 1.0 on pci0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib1:   I/O decode        0xa000-0xafff
>pcib1:   memory decode     0xd8000000-0xd9ffffff
>pcib1:   prefetched decode 0xd4000000-0xd7ffffff
>pci1: <PCI bus> on pcib1
>pci1: physical bus=1
>	map[10]: type 3, range 32, base d4000000, size 26, enabled
>	map[14]: type 4, range 32, base 0000a000, size  8, enabled
>	map[18]: type 1, range 32, base d9000000, size 14, enabled
>pcib0: matched entry for 0.1.INTA (source \_SB_.PCI0.LNKA)
>pcib0: slot 1 INTA is routed to irq 12
>pcib1: slot 0 INTA is routed to irq 12
>found->	vendor=0x1002, dev=0x5046, revid=0x00
>	bus=1, slot=0, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=12
>	powerspec 2  supports D0 D1 D3  current D0
>pci1: <display, VGA> at device 0.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 7.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <VIA 82C686A UDMA66 controller> port 0xb000-0xb00f at device 7.1 on pci0
>ata0: reset tp1 mask=03 ostat0=50 ostat1=00
>ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
>ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
>ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
>ata0: at 0x1f0 irq 14 on atapci0
>ata0: [MPSAFE]
>ata1: reset tp1 mask=03 ostat0=50 ostat1=00
>ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
>ata1-slave:  stat=0x00 err=0x01 lsb=0x7f msb=0x7f
>ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
>ata1: at 0x170 irq 15 on atapci0
>ata1: [MPSAFE]
>uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 11 at device 7.2 on pci0
>usb0: <VIA 83C572 USB controller> on uhci0
>usb0: USB revision 1.0
>uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhub0: port error, restarting port 1
>uhub0: port error, giving up port 1
>uhub0: port error, restarting port 2
>uhub0: port error, giving up port 2
>ums0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1
>ums0: 5 buttons and Z dir.
>uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 11 at device 7.3 on pci0
>usb1: <VIA 83C572 USB controller> on uhci1
>usb1: USB revision 1.0
>uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>uhub1: port error, restarting port 1
>uhub1: port error, giving up port 1
>uhub1: port error, restarting port 2
>uhub1: port error, giving up port 2
>pci0: <multimedia, audio> at device 7.5 (no driver attached)
>pci0: <multimedia, audio> at device 11.0 (no driver attached)
>xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xdb004000-0xdb00407f irq 10 at device 13.0 on pci0
>xl0: using memory mapped I/O
>xl0: Ethernet address: 00:50:04:6e:b9:01
>xl0: media options word: a
>xl0: found MII/AUTO
>miibus0: <MII bus> on xl0
>xlphy0: <3Com internal media interface> on miibus0
>xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>xl0: bpf attached
>atapci1: <Promise PDC20268 UDMA100 controller> port 0xe400-0xe40f,0xe000-0xe003,0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407 mem 0xdb000000-0xdb003fff irq 11 at device 17.0 on pci0
>atapci1: [MPSAFE]
>ata2: reset tp1 mask=03 ostat0=50 ostat1=00
>ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
>ata2-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
>ata2: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
>ata2: at 0xd400 on atapci1
>ata2: [MPSAFE]
>ata3: reset tp1 mask=03 ostat0=20 ostat1=30
>ata3-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
>ata3-slave:  stat=0x30 err=0x30 lsb=0x30 msb=0x30
>ata3: reset tp2 mask=03 stat0=20 stat1=30 devices=0x0
>ata3: at 0xdc00 on atapci1
>ata3: [MPSAFE]
>fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,chipset (EPP/NIBBLE) in COMPATIBLE mode
>ppbus0: <Parallel port bus> on ppc0
>plip0: <PLIP network interface> on ppbus0
>plip0: bpf attached
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0067
>atkbd: keyboard ID 0x41ab (2)
>kbdc: RESET_KBD return code:00fa
>kbdc: RESET_KBD status:00aa
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
>psm0: unable to allocate IRQ
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>npx0: [FAST]
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>ata: ata0 already exists; skipping it
>ata: ata1 already exists; skipping it
>atkbdc: atkbdc0 already exists; skipping it
>fdc: fdc0 already exists; skipping it
>ppc: ppc0 already exists; skipping it
>sio: sio0 already exists; skipping it
>sio: sio1 already exists; skipping it
>Trying Read_Port at 203
>Trying Read_Port at 243
>Trying Read_Port at 283
>Trying Read_Port at 2c3
>Trying Read_Port at 303
>Trying Read_Port at 343
>Trying Read_Port at 383
>Trying Read_Port at 3c3
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>ex_isa_identify()
>sc: sc0 already exists; skipping it
>vga: vga0 already exists; skipping it
>isa_probe_children: disabling PnP devices
>isa_probe_children: probing non-PnP devices
>orm0: <Option ROMs> at iomem 0xcc000-0xce7ff,0xc0000-0xcbfff on isa0
>pmtimer0 on isa0
>adv0: not probed (disabled)
>aha0: not probed (disabled)
>aic0: not probed (disabled)
>bt0: not probed (disabled)
>cs0: not probed (disabled)
>ed0: not probed (disabled)
>fe0: not probed (disabled)
>ie0: not probed (disabled)
>le0: not probed (disabled)
>lnc0: not probed (disabled)
>pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
>pcic1: not probed (disabled)
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x100>
>sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
>sio2: not probed (disabled)
>sio3: not probed (disabled)
>sn0: not probed (disabled)
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>fb0: vga0, vga, type:VGA (5), flags:0x7007f
>fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
>fb0: init mode:24, bios mode:3, current mode:24
>fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
>VGA parameters upon power-up
>50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
>bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>VGA parameters in BIOS for mode 24
>50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>EGA/VGA parameters to be used for mode 24
>50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>vt0: not probed (disabled)
>isa_probe_children: probing PnP devices
>Device configuration finished.
>procfs registered
>Timecounter "TSC" frequency 567959271 Hz quality 800
>Timecounters tick every 10.000 msec
>lo0: bpf attached
>ata1: spurious interrupt - status=0x00 error=0x01
>md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0a768c0
>acpi_cpu0: set speed to 100.0%
>acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
>ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
>ata0-master: setting PIO4 on VIA 82C686A chip
>ata0-master: setting UDMA66 on VIA 82C686A chip
>GEOM: Configure md0a, start 0 length 4423680 end 4423679
>GEOM: Configure md0c, start 0 length 4423680 end 4423679
>[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
>GEOM: create disk ad0 dp=0xc31eb560
>ad0: <IBM-DTLA-307030/TX4OA60A> ATA-5 disk at ata0-master
>ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B
>ad0: 16 secs/int, 1 depth queue, UDMA66
>[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
>ar: FreeBSD check1 failed
>ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
>ata1-master: setting PIO4 on VIA 82C686A chip
>GEOM: new disk ad0
>acd0: <LITEON DVD-ROM LTD163/GH5K> DVDROM drive at ata1 as master
>acd0: read 3437KB/s (8250KB/s), 512KB buffer, PIO4
>acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
>acd0: Writes:
>acd0: Audio: play, 256 volume levels
>acd0: Mechanism: ejectable tray, unlocked
>acd0: Medium: CD-ROM 120mm data disc
>[0] f:00 typ:5 s(CHS):15/0/1 e(CHS):1023/15/63 s:15120 l:10447920
>[1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/4/63 s:10474380 l:12578895
>[2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:23053275 l:12582549
>[3] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/7/63 s:35635824 l:24383016
>GEOM: Configure ad0s1, start 7741440 length 5349335040 end 5357076479
>GEOM: Configure ad0s2, start 5362882560 length 6440394240 end 11803276799
>GEOM: Configure ad0s3, start 11803276800 length 6442265088 end 18245541887
>GEOM: Configure ad0s4, start 18245541888 length 12484104192 end 30729646079
>ata2-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
>ata2-master: setting PIO4 on Promise PDC20268 chip
>ata2-master: setting UDMA33 on Promise PDC20268 chip
>GEOM: create disk ad4 dp=0xc31ead60
>ad4: <FUJITSU MPC3064AT/6021> ATA-3 disk at ata2-master
>ad4: 6187MB (12672450 sectors), 13410 C, 15 H, 63 S, 512 B
>ad4: 16 secs/int, 1 depth queue, UDMA33
>MBREXT Slice 5 on ad0s1:
>[0] f:00 typ:7 s(CHS):1/1/1 e(CHS):691/239/63 s:63 l:10447857
>[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>GEOM: Configure ad0s5, start 32256 length 5349302784 end 5349335039
>ar: Promise check1 failed
>GEOM: Configure ad0s2a, start 536870912 length 5903523328 end 6440394239
>GEOM: Configure ad0s2b, start 0 length 536870912 end 536870911
>GEOM: Configure ad0s2c, start 0 length 6440394240 end 6440394239
>GEOM: Configure ad0s3a, start 1073741824 length 5368523264 end 6442265087
>GEOM: Configure ad0s3b, start 0 length 1073741824 end 1073741823
>GEOM: Configure ad0s3c, start 0 length 6442265088 end 6442265087
>GEOM: new disk ad4
>[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:12672387
>[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>GEOM: Configure ad4s1, start 32256 length 6488262144 end 6488294399
>GEOM: Configure ad4s1a, start 536870912 length 5951391232 end 6488262143
>GEOM: Configure ad4s1b, start 0 length 536870912 end 536870911
>GEOM: Configure ad4s1c, start 0 length 6488262144 end 6488262143
>Mounting root from ufs:/dev/md0
>start_init: trying /sbin/init
>start_init: trying /sbin/oinit
>start_init: trying /sbin/init.bak
>start_init: trying /stand/sysinstall
>/stand/sysinstall running as init on serial console

Actions: View

Attachments on bug 59792: 37599 | 37600