View | Details | Raw Unified | Return to bug 67719
Collapse All | Expand All

(-)bge.4 (-1 / +1 lines)
Lines 88-94 Link Here
88 
.Pp
 88 
.Pp
89 
Most BCM5700-based cards also use the Broadcom BCM5401 or BCM5411 10/100/1000
 89 
Most BCM5700-based cards also use the Broadcom BCM5401 or BCM5411 10/100/1000
90 
copper gigabit transceivers,
 90 
copper gigabit transceivers,
91 
which support autonegotiation of 10, 100 and 1000mbps modes in
 91 
which support autonegotiation of 10, 100 and 1000Mbps modes in
92 
full or half duplex.
 92 
full or half duplex.
93 
.Pp
 93 
.Pp
94 
The BCM570x also supports jumbo frames, which can be configured
 94 
The BCM570x also supports jumbo frames, which can be configured
(-)cue.4 (-1 / +1 lines)
Lines 54-60 Link Here
54 
Packets are
 54 
Packets are
55 
received and transmitted over separate USB bulk transfer endpoints.
 55 
received and transmitted over separate USB bulk transfer endpoints.
56 
.Pp
 56 
.Pp
57 
The CATC adapter supports only 10mbps half-duplex mode, hence there
 57 
The CATC adapter supports only 10Mbps half-duplex mode, hence there
58 
are no
 58 
are no
59 
.Xr ifmedia 4
 59 
.Xr ifmedia 4
60 
modes to select.
 60 
modes to select.
(-)dc.4 (-1 / +1 lines)
Lines 238-244 Link Here
238 
.El
 238 
.El
239 
.Pp
 239 
.Pp
240 
Note that the 100baseTX media type may not be available on certain
 240 
Note that the 100baseTX media type may not be available on certain
241 
Intel 21143 adapters which support 10mbps media attachments only.
 241 
Intel 21143 adapters which support 10Mbps media attachments only.
242 
For more information on configuring this device, see
 242 
For more information on configuring this device, see
243 
.Xr ifconfig 8 .
 243 
.Xr ifconfig 8 .
244 
.Sh DIAGNOSTICS
 244 
.Sh DIAGNOSTICS
(-)gx.4 (-2 / +2 lines)
Lines 51-58 Link Here
51 
supports TCP/IP checksum offload.
 51 
supports TCP/IP checksum offload.
52 
.Pp
 52 
.Pp
53 
The 82543-T cards use the Marvell 10/100/1000 copper gigabit transceiver
 53 
The 82543-T cards use the Marvell 10/100/1000 copper gigabit transceiver
54 
chip, which supports autonegotiation of 10, 100 and 1000mbps modes in
 54 
chip, which supports autonegotiation of 10, 100 and 1000Mbps modes in
55 
full or half duplex, however half duplex 1000mbps is not supported.
 55 
full or half duplex, however half duplex 1000Mbps is not supported.
56 
.Pp
 56 
.Pp
57 
The driver also supports jumbo frames, which can be configured
 57 
The driver also supports jumbo frames, which can be configured
58 
via the interface MTU setting.
 58 
via the interface MTU setting.
(-)kue.4 (-1 / +1 lines)
Lines 83-89 Link Here
83 
Packets are
 83 
Packets are
84 
received and transmitted over separate USB bulk transfer endpoints.
 84 
received and transmitted over separate USB bulk transfer endpoints.
85 
.Pp
 85 
.Pp
86 
The Kawasaki adapter supports only 10mbps half-duplex mode, hence there
 86 
The Kawasaki adapter supports only 10Mbps half-duplex mode, hence there
87 
are no
 87 
are no
88 
.Xr ifmedia 4
 88 
.Xr ifmedia 4
89 
modes to select.
 89 
modes to select.
(-)lge.4 (-1 / +1 lines)
Lines 54-60 Link Here
54 
D-Link DGE-500SX
 54 
D-Link DGE-500SX
55 
.El
 55 
.El
56 
.Pp
 56 
.Pp
57 
These NICs are capable of 1000mbps speeds over fiber optic cable.
 57 
These NICs are capable of 1000Mbps speeds over fiber optic cable.
58 
The LXT1001 also supports a GMII port for use with 10/100/1000 copper
 58 
The LXT1001 also supports a GMII port for use with 10/100/1000 copper
59 
PHYs, however there aren't currently any NICs on the market that use
 59 
PHYs, however there aren't currently any NICs on the market that use
60 
this feature.
 60 
this feature.
(-)nge.4 (-2 / +2 lines)
Lines 70-76 Link Here
70 
Trendware TEG-PCITX (32-bit PCI) and TEG-PCITX2 (64-bit PCI)
 70 
Trendware TEG-PCITX (32-bit PCI) and TEG-PCITX2 (64-bit PCI)
71 
.El
 71 
.El
72 
.Pp
 72 
.Pp
73 
All of these NICs are capable of 10, 100 and 1000mbps speeds over CAT5
 73 
All of these NICs are capable of 10, 100 and 1000Mbps speeds over CAT5
74 
copper cable.
 74 
copper cable.
75 
The DP83820 supports TBI (ten bit interface) and GMII
 75 
The DP83820 supports TBI (ten bit interface) and GMII
76 
transceivers, which means it can be used with either copper or 1000baseX
 76 
transceivers, which means it can be used with either copper or 1000baseX
Lines 80-86 Link Here
80 
and up to 4 pattern match buffers.
 80 
and up to 4 pattern match buffers.
81 
.Pp
 81 
.Pp
82 
Most cards also use the DP83861 10/100/1000 copper gigabit transceiver
 82 
Most cards also use the DP83861 10/100/1000 copper gigabit transceiver
83 
chip, which supports autonegotiation of 10, 100 and 1000mbps modes in
 83 
chip, which supports autonegotiation of 10, 100 and 1000Mbps modes in
84 
full or half duplex.
 84 
full or half duplex.
85 
.Pp
 85 
.Pp
86 
The DP83820 also supports jumbo frames, which can be configured
 86 
The DP83820 also supports jumbo frames, which can be configured

Return to bug 67719