Attachment 43644 Details for Bug 67719 – mbps2Mbps.diff

[patch] mbps2Mbps.diff

mbps2Mbps.diff (text/plain), 3.28 KB, created by Linh Pham on 2004-06-08 17:40:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Linh Pham

Created: 2004-06-08 17:40:23 UTC

Size: 3.28 KB

patch

obsolete

>--- orig/bge.4	Tue Jun  8 09:23:15 2004
>+++ bge.4	Tue Jun  8 09:23:34 2004
>@@ -88,7 +88,7 @@
> .Pp
> Most BCM5700-based cards also use the Broadcom BCM5401 or BCM5411 10/100/1000
> copper gigabit transceivers,
>-which support autonegotiation of 10, 100 and 1000mbps modes in
>+which support autonegotiation of 10, 100 and 1000Mbps modes in
> full or half duplex.
> .Pp
> The BCM570x also supports jumbo frames, which can be configured
>--- orig/cue.4	Tue Jun  8 09:23:15 2004
>+++ cue.4	Tue Jun  8 09:23:46 2004
>@@ -54,7 +54,7 @@
> Packets are
> received and transmitted over separate USB bulk transfer endpoints.
> .Pp
>-The CATC adapter supports only 10mbps half-duplex mode, hence there
>+The CATC adapter supports only 10Mbps half-duplex mode, hence there
> are no
> .Xr ifmedia 4
> modes to select.
>--- orig/dc.4	Tue Jun  8 09:23:15 2004
>+++ dc.4	Tue Jun  8 09:23:56 2004
>@@ -238,7 +238,7 @@
> .El
> .Pp
> Note that the 100baseTX media type may not be available on certain
>-Intel 21143 adapters which support 10mbps media attachments only.
>+Intel 21143 adapters which support 10Mbps media attachments only.
> For more information on configuring this device, see
> .Xr ifconfig 8 .
> .Sh DIAGNOSTICS
>--- orig/gx.4	Tue Jun  8 09:23:15 2004
>+++ gx.4	Tue Jun  8 09:24:12 2004
>@@ -51,8 +51,8 @@
> supports TCP/IP checksum offload.
> .Pp
> The 82543-T cards use the Marvell 10/100/1000 copper gigabit transceiver
>-chip, which supports autonegotiation of 10, 100 and 1000mbps modes in
>-full or half duplex, however half duplex 1000mbps is not supported.
>+chip, which supports autonegotiation of 10, 100 and 1000Mbps modes in
>+full or half duplex, however half duplex 1000Mbps is not supported.
> .Pp
> The driver also supports jumbo frames, which can be configured
> via the interface MTU setting.
>--- orig/kue.4	Tue Jun  8 09:23:15 2004
>+++ kue.4	Tue Jun  8 09:24:24 2004
>@@ -83,7 +83,7 @@
> Packets are
> received and transmitted over separate USB bulk transfer endpoints.
> .Pp
>-The Kawasaki adapter supports only 10mbps half-duplex mode, hence there
>+The Kawasaki adapter supports only 10Mbps half-duplex mode, hence there
> are no
> .Xr ifmedia 4
> modes to select.
>--- orig/lge.4	Tue Jun  8 09:23:15 2004
>+++ lge.4	Tue Jun  8 09:24:34 2004
>@@ -54,7 +54,7 @@
> D-Link DGE-500SX
> .El
> .Pp
>-These NICs are capable of 1000mbps speeds over fiber optic cable.
>+These NICs are capable of 1000Mbps speeds over fiber optic cable.
> The LXT1001 also supports a GMII port for use with 10/100/1000 copper
> PHYs, however there aren't currently any NICs on the market that use
> this feature.
>--- orig/nge.4	Tue Jun  8 09:23:15 2004
>+++ nge.4	Tue Jun  8 09:24:47 2004
>@@ -70,7 +70,7 @@
> Trendware TEG-PCITX (32-bit PCI) and TEG-PCITX2 (64-bit PCI)
> .El
> .Pp
>-All of these NICs are capable of 10, 100 and 1000mbps speeds over CAT5
>+All of these NICs are capable of 10, 100 and 1000Mbps speeds over CAT5
> copper cable.
> The DP83820 supports TBI (ten bit interface) and GMII
> transceivers, which means it can be used with either copper or 1000baseX
>@@ -80,7 +80,7 @@
> and up to 4 pattern match buffers.
> .Pp
> Most cards also use the DP83861 10/100/1000 copper gigabit transceiver
>-chip, which supports autonegotiation of 10, 100 and 1000mbps modes in
>+chip, which supports autonegotiation of 10, 100 and 1000Mbps modes in
> full or half duplex.
> .Pp
> The DP83820 also supports jumbo frames, which can be configured

Actions: View | Diff

Attachments on bug 67719: 43644