Attachment 54132 Details for Bug 81916 – v20z-5.4-dmesg

v20z-5.4-dmesg

v20z-5.4-dmesg (text/plain), 4.91 KB, created by Gavin Atkinson on 2005-06-05 13:10:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gavin Atkinson

Created: 2005-06-05 13:10:00 UTC

Size: 4.91 KB

patch

obsolete

>Copyright (c) 1992-2005 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD 5.4-RC3 #0: Wed Apr 20 21:16:56 UTC 2005
>    root@xx.yy.zz:/usr/obj/usr/src/sys/GENERIC
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: AMD Opteron(tm) Processor 248 (2190.85-MHz K8-class CPU)
>  Origin = "AuthenticAMD"  Id = 0xf58  Stepping = 8
>  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
>  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
>real memory  = 4227268608 (4031 MB)
>avail memory = 4080427008 (3891 MB)
>ACPI APIC Table: <PTLTD  	 APIC  >
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
>MADT: Forcing active-low polarity and level trigger for SCI
>ioapic0 <Version 1.1> irqs 0-23 on motherboard
>ioapic1 <Version 1.1> irqs 24-27 on motherboard
>ioapic2 <Version 1.1> irqs 28-31 on motherboard
>acpi0: <PTLTD 	 XSDT> on motherboard
>acpi0: Power Button (fixed)
>acpi0: Sleep Button (fixed)
>unknown: I/O range not supported
>unknown: I/O range not supported
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
>cpu0: <ACPI CPU> on acpi0
>cpu1: <ACPI CPU> on acpi0
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0x8080-0x80ff,0x8000-0x807f,0xcf8-0xcff iomem 0xd8000-0xdbfff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>ohci0: <OHCI (generic) USB controller> mem 0xfd120000-0xfd120fff irq 19 at device 0.0 on pci1
>usb0: OHCI version 1.0, legacy support
>usb0: SMM does not respond, resetting
>usb0: <OHCI (generic) USB controller> on ohci0
>usb0: USB revision 1.0
>uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 3 ports with 3 removable, self powered
>ohci1: <OHCI (generic) USB controller> mem 0xfd121000-0xfd121fff irq 19 at device 0.1 on pci1
>usb1: OHCI version 1.0, legacy support
>usb1: SMM does not respond, resetting
>usb1: <OHCI (generic) USB controller> on ohci1
>usb1: USB revision 1.0
>uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 3 ports with 3 removable, self powered
>pci1: <display, VGA> at device 5.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 7.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <AMD 8111 UDMA133 controller> port 0x1000-0x100f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
>ata0: channel #0 on atapci0
>ata1: channel #1 on atapci0
>pci0: <bridge> at device 7.3 (no driver attached)
>pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xfe800000-0xfe80ffff irq 25 at device 2.0 on pci2
>miibus0: <MII bus> on bge0
>brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
>bge0: Ethernet address: 00:09:3d:10:16:a3
>bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xfe810000-0xfe81ffff irq 26 at device 3.0 on pci2
>miibus1: <MII bus> on bge1
>brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
>brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
>bge1: Ethernet address: 00:09:3d:10:16:a4
>mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2000-0x20ff mem 0xfe820000-0xfe82ffff,0xfe830000-0xfe83ffff irq 27 at device 4.0 on pci2
>pci0: <base peripheral, interrupt controller> at device 10.1 (no driver attached)
>pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>pci0: <base peripheral, interrupt controller> at device 11.1 (no driver attached)
>atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>kbd0 at atkbd0
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model Generic PS/2 mouse, device ID 0
>sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>sio0: type 16550A
>fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>orm0: <ISA Option ROMs> at iomem 0xcb000-0xcefff,0xc9800-0xcafff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
>ppc0: cannot reserve I/O port range
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounters tick every 1.000 msec
>acd0: CDROM <CD-224E/1.9A> at ata1-master PIO4
>Waiting 15 seconds for SCSI devices to settle
>SMP: AP CPU #1 Launched!
>da0 at mpt0 bus 0 target 1 lun 0
>da0: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device 
>da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
>da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
>Mounting root from ufs:/dev/da0s1a

Actions: View

Attachments on bug 81916: 54132 | 54133