Attachment 59512 Details for Bug 89545 – boot.log

boot.log

boot.log (text/plain; charset=us-ascii), 17.92 KB, created by ravi on 2006-01-07 20:27:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: ravi

Created: 2006-01-07 20:27:30 UTC

Size: 17.92 KB

patch

obsolete

>Copyright (c) 1992-2005 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>The Regents of the University of California. All rights reserved.
>FreeBSD 6.0-STABLE #0: Sat Jan  7 14:12:22 EST 2006 ravi@happy.cow.org:/usr/obj/usr/src/sys/NEU-COW
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc0aa4000.
>Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0aa4194.
>MP Configuration Table version 1.4 found at 0xc00fbeca
>Table 'FACP' at 0x3fffc040
>Table 'APIC' at 0x3fffc100
>MADT: Found table at 0x3fffc100
>APIC: Using the MADT enumerator.
>MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
>SMP: Added CPU 0 (AP)
>MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
>MADT: Found CPU APIC ID 2 ACPI ID 2: disabled
>MADT: Found CPU APIC ID 3 ACPI ID 3: enabled
>SMP: Added CPU 3 (AP)
>ACPI APIC Table: <COMPAQ 00000083>
>Calibrating clock(s) ... i8254 clock: 1193107 Hz
>CLK_USE_I8254_CALIBRATION not specified - using default frequency
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Calibrating TSC clock ... TSC clock: 996849346 Hz
>CPU: Intel Pentium III (996.85-MHz 686-class CPU)
>Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
>Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
>real memory  = 1073725440 (1023 MB)
>Physical memory chunk(s):
>0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
>0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
>0x0000000000c28000 - 0x000000003edc3fff, 1041874944 bytes (254364 pages)
>avail memory = 1041620992 (993 MB)
>APIC ID: physical 0, logical 0:0
>APIC ID: physical 3, logical 0:1
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>cpu0 (BSP): APIC ID:  3
>cpu1 (AP): APIC ID:  0
>bios32: Found BIOS32 Service Directory header at 0xc00ffee0
>bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
>pcibios: PCI BIOS entry at 0xf0000+0x94
>Other BIOS signatures found:
>APIC: CPU 0 has ACPI ID 3
>APIC: CPU 1 has ACPI ID 0
>MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
>ioapic0: Changing APIC ID to 8
>ioapic0: Routing external 8259A's -> intpin 0
>ioapic0: intpin 0 -> ExtINT (edge, high)
>ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
>ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
>ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
>ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
>ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
>ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
>ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
>ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
>ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
>ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
>ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
>ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
>ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
>ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
>ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
>ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
>ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
>ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
>ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
>ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
>ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
>ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
>ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
>ioapic0: intpin 24 -> PCI IRQ 24 (level, low)
>ioapic0: intpin 25 -> PCI IRQ 25 (level, low)
>ioapic0: intpin 26 -> PCI IRQ 26 (level, low)
>ioapic0: intpin 27 -> PCI IRQ 27 (level, low)
>ioapic0: intpin 28 -> PCI IRQ 28 (level, low)
>ioapic0: intpin 29 -> PCI IRQ 29 (level, low)
>ioapic0: intpin 30 -> PCI IRQ 30 (level, low)
>ioapic0: intpin 31 -> PCI IRQ 31 (level, low)
>ioapic0: intpin 32 -> PCI IRQ 32 (level, low)
>ioapic0: intpin 33 -> PCI IRQ 33 (level, low)
>ioapic0: intpin 34 -> PCI IRQ 34 (level, low)
>lapic: Routing NMI -> LINT1
>MADT: Forcing active-low polarity and level trigger for SCI
>ioapic0: intpin 9 polarity: low
>ioapic0: intpin 9 trigger: level
>ioapic0 <Version 1.1> irqs 0-34 on motherboard
>cpu0 BSP:
>ID: 0x03000000   VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff
>lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>timer: 0x000100ef therm: 0x00000000 err: 0x000100f0 pcm: 0x00010000
>wlan: <802.11 Link Layer>
>random: <entropy source, Software, Yarrow>
>nfslock: pseudo-device
>io: <I/O>
>mem: <memory>
>Pentium Pro MTRR support enabled
>null: <null device, zero device>
>npx0: [FAST]
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>acpi0: <COMPAQ MICRO> on motherboard
>acpi0: [MPSAFE]
>acpi0: Power Button (fixed)
>pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
>pci_open(1a):	mode1res=0x80000000 (0x80000000)
>pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=00091166)
>pcibios: BIOS version 2.10
>AcpiOsDerivePciId: bus 0 dev 0 func 0
>unknown: I/O range not supported
>AcpiOsDerivePciId: bus 0 dev 0 func 1
>pci_link1: Links after initial probe:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link1: Links after initial validation:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link1: Links after disable:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link2: Links after initial probe:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link2: Links after initial validation:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link2: Links after disable:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link3: Links after initial probe:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link3: Links after initial validation:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link3: Links after disable:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link4: Links after initial probe:
>Index  IRQ  Rtd  Ref  IRQs
>0    5   N     0  5 10 11 15
>pci_link4: Links after initial validation:
>Index  IRQ  Rtd  Ref  IRQs
>0    5   N     0  5 10 11 15
>pci_link4: Links after disable:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link5: Links after initial probe:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link5: Links after initial validation:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link5: Links after disable:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link6: Links after initial probe:
>Index  IRQ  Rtd  Ref  IRQs
>0    3   N     0  5 10 11 15
>pci_link6: Links after initial validation:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link6: Links after disable:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link7: Links after initial probe:
>Index  IRQ  Rtd  Ref  IRQs
>0    7   N     0  5 10 11 15
>pci_link7: Links after initial validation:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link7: Links after disable:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link8: Links after initial probe:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link8: Links after initial validation:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link8: Links after disable:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link9: Links after initial probe:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link9: Links after initial validation:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>pci_link9: Links after disable:
>Index  IRQ  Rtd  Ref  IRQs
>0  255   N     0  5 10 11 15
>ACPI timer: 0/3 1/1 0/3 0/3 0/3 0/7 0/16777185 1/1 0/16777156 0/15 -> 2
>Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
>cpu0: <ACPI CPU> on acpi0
>cpu1: <ACPI CPU> on acpi0
>pcib0: <ACPI Host-PCI bridge> on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: physical bus=0
>found->	vendor=0x1166, dev=0x0009, revid=0x06
>bus=0, slot=0, func=0
>class=06-00-00, hdrtype=0x00, mfdev=1
>cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords)
>lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1166, dev=0x0009, revid=0x06
>bus=0, slot=0, func=1
>class=06-00-00, hdrtype=0x00, mfdev=1
>cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords)
>lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1000, dev=0x0010, revid=0x02
>bus=0, slot=1, func=0
>class=01-04-00, hdrtype=0x00, mfdev=0
>cmdreg=0x0157, statreg=0x0210, cachelnsz=8 (dwords)
>lattimer=0xc0 (5760 ns), mingnt=0x1e (7500 ns), maxlat=0x08 (2000 ns)
>intpin=a, irq=3
>powerspec 2  supports D0 D3  current D0
>map[10]: type 4, range 32, base 00002000, size  8, enabled
>map[14]: type 1, range 32, base c5000000, size 24, enabled
>map[18]: type 1, range 32, base c4000000, size 24, enabled
>pcib0: matched entry for 0.1.INTA
>pcib0: slot 1 INTA hardwired to IRQ 19
>found->	vendor=0x1002, dev=0x4756, revid=0x7a
>bus=0, slot=3, func=0
>class=03-00-00, hdrtype=0x00, mfdev=0
>cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
>lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
>powerspec 1  supports D0 D3  current D0
>map[10]: type 3, range 32, base c2000000, size 24, enabled
>map[14]: type 4, range 32, base 00002400, size  8, enabled
>map[18]: type 1, range 32, base c3fff000, size 12, enabled
>found->	vendor=0x0e11, dev=0xa0f0, revid=0x00
>bus=0, slot=4, func=0
>class=08-80-00, hdrtype=0x00, mfdev=0
>cmdreg=0x0143, statreg=0x0200, cachelnsz=0 (dwords)
>lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>intpin=a, irq=255
>map[10]: type 4, range 32, base 00001800, size  8, enabled
>map[14]: type 1, range 32, base c3ffef00, size  8, enabled
>found->	vendor=0x1166, dev=0x0200, revid=0x51
>bus=0, slot=15, func=0
>class=06-01-00, hdrtype=0x00, mfdev=1
>cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
>lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>map[90]: type 4, range 32, base 00000000, size  4, enabled
>found->	vendor=0x1166, dev=0x0211, revid=0x00
>bus=0, slot=15, func=1
>class=01-01-8a, hdrtype=0x00, mfdev=1
>cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords)
>lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>map[20]: type 4, range 32, base 00002800, size  4, enabled
>ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem 0xc5000000-0xc5ffffff,0xc4000000-0xc4ffffff irq 19 at device 1.0 on pci0
>ida0: Reserved 0x1000000 bytes for rid 0x14 type 3 at 0xc5000000
>ida0: [GIANT-LOCKED]
>ida0: drives=1 firm_rev=1.50
>idad0: <Compaq Logical Drive> on ida0
>idad0: 34727MB (71122560 sectors), blocksize=512
>pci0: <display, VGA> at device 3.0 (no driver attached)
>pci0: <base peripheral> at device 4.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 15.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0
>atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2800
>ata0: <ATA channel 0> on atapci0
>atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
>atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
>ata0: reset tp1 mask=03 ostat0=60 ostat1=70
>ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
>ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
>ata0: reset tp2 stat0=20 stat1=30 devices=0x0
>ata0: [MPSAFE]
>ata1: <ATA channel 1> on atapci0
>atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
>atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
>ata1: reset tp1 mask=03 ostat0=50 ostat1=01
>ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
>ata1: stat1=0x01 err=0x04 lsb=0x14 msb=0xeb
>ata1: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
>ata1: [MPSAFE]
>pcib1: <ACPI Host-PCI bridge> on acpi0
>pci3: <ACPI PCI bus> on pcib1
>pci3: physical bus=3
>found->	vendor=0x8086, dev=0x1229, revid=0x08
>bus=3, slot=4, func=0
>class=02-00-00, hdrtype=0x00, mfdev=0
>cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
>lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
>intpin=a, irq=5
>powerspec 2  supports D0 D1 D2 D3  current D0
>map[10]: type 1, range 32, base c6fff000, size 12, enabled
>map[14]: type 4, range 32, base 00003000, size  6, enabled
>map[18]: type 1, range 32, base c6e00000, size 20, enabled
>pcib1: matched entry for 3.4.INTA
>pcib1: slot 4 INTA hardwired to IRQ 17
>found->	vendor=0x8086, dev=0x1229, revid=0x08
>bus=3, slot=5, func=0
>class=02-00-00, hdrtype=0x00, mfdev=0
>cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
>lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
>intpin=a, irq=7
>powerspec 2  supports D0 D1 D2 D3  current D0
>map[10]: type 1, range 32, base c6dff000, size 12, enabled
>map[14]: type 4, range 32, base 00003040, size  6, enabled
>map[18]: type 1, range 32, base c6c00000, size 20, enabled
>pcib1: matched entry for 3.5.INTA
>pcib1: slot 5 INTA hardwired to IRQ 24
>fxp0: <Intel 82559 Pro/100 Ethernet> port 0x3000-0x303f mem 0xc6fff000-0xc6ffffff,0xc6e00000-0xc6efffff irq 17 at device 4.0 on pci3
>fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc6fff000
>fxp0: using memory space register mapping
>fxp0: PCI IDs: 8086 1229 0e11 b134 0008
>fxp0: Dynamic Standby mode is disabled
>miibus0: <MII bus> on fxp0
>inphy0: <i82555 10/100 media interface> on miibus0
>inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>fxp0: bpf attached
>fxp0: Ethernet address: 00:02:a5:e8:a9:62
>fxp0: [MPSAFE]
>fxp1: <Intel 82559 Pro/100 Ethernet> port 0x3040-0x307f mem 0xc6dff000-0xc6dfffff,0xc6c00000-0xc6cfffff irq 24 at device 5.0 on pci3
>fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc6dff000
>fxp1: using memory space register mapping
>fxp1: PCI IDs: 8086 1229 0e11 b134 0008
>fxp1: Dynamic Standby mode is disabled
>miibus1: <MII bus> on fxp1
>inphy1: <i82555 10/100 media interface> on miibus1
>inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>fxp1: bpf attached
>fxp1: Ethernet address: 00:02:a5:e8:a9:61
>fxp1: [MPSAFE]
>acpi_tz0: <Thermal Zone> on acpi0
>psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0065
>atkbd: keyboard ID 0x41ab (2)
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
>atkbd0: [GIANT-LOCKED]
>psm0: current command byte:0065
>psm0: failed to reset the aux device.
>fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
>fdc0: ic_type 90 part_id 73
>fdc0: [MPSAFE]
>fdc0: [FAST]
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>sio0: irq maps: 0x8001 0x8011 0x8001 0x8001
>sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>sio0: type 16550A
>ex_isa_identify()
>ata: ata0 already exists; skipping it
>ata: ata1 already exists; skipping it
>atkbdc: atkbdc0 already exists; skipping it
>fdc: fdc0 already exists; skipping it
>sio: sio0 already exists; skipping it
>pnp_identify: Trying Read_Port at 203
>pnp_identify: Trying Read_Port at 243
>pnp_identify: Trying Read_Port at 283
>pnp_identify: Trying Read_Port at 2c3
>pnp_identify: Trying Read_Port at 303
>pnp_identify: Trying Read_Port at 343
>pnp_identify: Trying Read_Port at 383
>pnp_identify: Trying Read_Port at 3c3
>PNP Identify complete
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: Failed Intstat Reg Test
>unknown: status reg test failed ff
>Jan  7 15:01:56 happy last message repeated 2 times
>sc: sc0 already exists; skipping it
>vga: vga0 already exists; skipping it
>isa_probe_children: disabling PnP devices
>isa_probe_children: probing non-PnP devices
>pmtimer0 on isa0
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0
>adv0: not probed (disabled)
>aha0: not probed (disabled)
>aic0: not probed (disabled)
>bt0: not probed (disabled)
>cs0: not probed (disabled)
>ed0: not probed (disabled)
>fe0: not probed (disabled)
>ie0: not probed (disabled)
>lnc0: not probed (disabled)
>ppc0: parallel port not found.
>ppc0: <Parallel port> failed to probe at irq 7 on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>sio1: irq maps: 0x8001 0x8001 0x8001 0x8001
>sio1: probe failed test(s): 0 1 2 4 6 7 9
>sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
>sio2: not probed (disabled)
>sio3: not probed (disabled)
>sn0: not probed (disabled)
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>vt0: not probed (disabled)
>isa_probe_children: probing PnP devices
>Device configuration finished.
>procfs registered
>lapic: Divisor 2, Frequency 66456460 hz
>Timecounter "TSC" frequency 996849346 Hz quality -100
>Timecounters tick every 1.000 msec
>lo0: bpf attached
>GEOM: new disk idad0
>ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
>acd0: setting PIO4 on ServerWorks ROSB4 chip
>acd0: <CD-224E/9.0C> CDROM drive at ata1 as master
>acd0: read 4134KB/s (4134KB/s), 512KB buffer, PIO4
>acd0: Reads: CDR, CDDA stream
>acd0: Writes:
>acd0: Audio: play, 256 volume levels
>acd0: Mechanism: ejectable tray, unlocked
>acd0: Medium: no/blank disc
>ATA PseudoRAID loaded
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>ID: 0x00000000   VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff
>lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
>ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
>ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
>ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
>ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
>ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
>ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
>ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
>ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
>ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
>ioapic0: routing intpin 24 (PCI IRQ 24) to cluster 0
>Trying to mount root from ufs:/dev/idad0s1a
>start_init: trying /sbin/init
>Jan  7 15:01:56 happy savecore: no dumps found
>Jan  7 15:01:56 happy named[453]: starting BIND 9.3.1 -u bind -t /var/named
>Jan  7 15:01:56 happy named[453]: command channel listening on 127.0.0.1#953
>Jan  7 15:01:56 happy named[453]: command channel listening on ::1#953
>Jan  7 15:01:56 happy named[453]: zone 0.0.127.IN-ADDR.ARPA/IN: loading master file master/localhost.rev: file not found
>Jan  7 15:01:56 happy named[453]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA/IN: loading master file master/localhost-v6.rev: file not found
>Jan  7 15:01:57 happy named[453]: running
>Accounting enabled
>Linux ELF exec handler installed

Actions: View

Attachments on bug 89545: 59510 | 59511 | 59512 | 59513