Attachment 6019 Details for Bug 13946 – file.diff

[patch] file.diff

file.diff (text/plain), 6.72 KB, created by jedgar on 1999-09-25 16:40:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: jedgar

Created: 1999-09-25 16:40:01 UTC

Size: 6.72 KB

patch

obsolete

>Index: doc/en_US.ISO_8859-1/books/handbook/kernelconfig/chapter.sgml
>===================================================================
>RCS file: /home/ncvs/doc/en_US.ISO_8859-1/books/handbook/kernelconfig/chapter.sgml,v
>retrieving revision 1.20
>diff -c -r1.20 chapter.sgml
>*** chapter.sgml	1999/09/06 06:52:59	1.20
>--- chapter.sgml	1999/09/25 15:27:11
>***************
>*** 404,420 ****
>  	</varlistentry>
>  	
>  	<varlistentry>
>- 	  <term><literal>options BOUNCE_BUFFERS</literal></term>
>- 	  
>- 	  <listitem>
>- 	    <para>ISA devices and EISA devices operating in an ISA
>- 	      compatibility mode can only perform DMA (Direct Memory Access)
>- 	      to memory below 16 megabytes.  This option enables such devices
>- 	      to work in systems with more than 16 megabytes of memory.</para>
>- 	  </listitem>
>- 	</varlistentry>
>- 	
>- 	<varlistentry>
>  	  <term><literal>options UCONSOLE</literal></term>
>  	  
>  	  <listitem>
>--- 404,409 ----
>***************
>*** 613,618 ****
>--- 602,616 ----
>  	</varlistentry>
>  	
>  	<varlistentry>
>+ 	  <term><literal>controller eisa0</literal></term>
>+ 	  <listitem>
>+ 	    <para>Include this if you have an EISA motherboard.  This enables
>+ 	      auto-detection and configuration support for all devices on the
>+               EISA bus.</para>
>+ 	  </listitem>
>+ 	</varlistentry>
>+ 	
>+ 	<varlistentry>
>  	  <term><literal>controller pci0</literal></term>
>  	  
>  	  <listitem>
>***************
>*** 656,662 ****
>  	</varlistentry>
>  	
>  	<varlistentry>
>! 	  <term><literal>device wcd0<anchor
>  		id="kernelconfig-atapi"></literal></term>
>  	  
>  	  <listitem>
>--- 654,660 ----
>  	</varlistentry>
>  	
>  	<varlistentry>
>! 	  <term><literal>device acd0<anchor
>  		id="kernelconfig-atapi"></literal></term>
>  	  
>  	  <listitem>
>***************
>*** 895,900 ****
>--- 893,915 ----
>  	  
>  	  <listitem>
>  	    <para>Support for SCSI CD-ROM drives.</para>
>+ 	  </listitem>
>+ 	</varlistentry>
>+ 	
>+ 	<varlistentry>
>+ 	  <term><literal>device ch0</literal></term>
>+ 	  
>+ 	  <listitem>
>+ 	    <para>Support for SCSI media changers such
>+             as tape libraries.</para>
>+ 	  </listitem>
>+ 	</varlistentry>
>+ 	
>+ 	<varlistentry>
>+ 	  <term><literal>device pass0</literal></term>
>+ 	  
>+ 	  <listitem>
>+ 	    <para>CAM passthrough driver.</para>
>  	    
>  	    <para>Note that the number <literal>0</literal> in the above
>  	      entries is slightly misleading: all these devices are
>***************
>*** 1108,1122 ****
>  	  </listitem>
>  	</varlistentry>
>  	
>  	<varlistentry>
>! 	  <term><literal>device lpt0 at isa? port? tty irq 7 vector
>! 	      lptintr</literal></term>
>  	  
>  	  <listitem>
>! 	    <para><literal>lpt0</literal> through <literal>lpt2</literal> are
>! 	      the three printer ports you could conceivably have.  Most people
>! 	      just have one, though, so feel free to comment out the other two
>! 	      lines if you do not have them.</para>
>  	  </listitem>
>  	</varlistentry>
>        </variablelist>
>--- 1123,1154 ----
>  	  </listitem>
>  	</varlistentry>
>  	
>+ 	<varlistentry>
>+ 	  <term><literal>controller ppbus0</literal></term>
>+ 	  
>+ 	  <listitem>
>+ 	    <para>Provides support for the parallel port bus.</para>
>+ 	  </listitem>
>+ 	</varlistentry>
>+ 	
>  	<varlistentry>
>! 	  <term><literal>device ppc0 at isa? port? tty irq 7</literal></term>
>  	  
>  	  <listitem>
>! 	    <para>ISA-bus parallel port interface.</para>
>! 	  </listitem>
>! 	</varlistentry>
>! 	
>! 	<varlistentry>
>! 	  <term><literal>device lpt0 at ppbus?</literal></term>
>! 	  
>! 	  <listitem>
>! 	    <para>Provides support for the parallel port printer.</para>
>! 
>!             <note>
>!               <para>All three of the above items must be included to
>!                 enable parallel printer support.</para>
>!             </note>
>  	  </listitem>
>  	</varlistentry>
>        </variablelist>
>***************
>*** 1427,1433 ****
>  	  
>  	  <listitem>
>  	    <para>Generic sound driver code.  Required for all of the
>! 	      following sound cards except <literal>pca</literal>.</para>
>  	  </listitem>
>  	</varlistentry>
>  	
>--- 1459,1466 ----
>  	  
>  	  <listitem>
>  	    <para>Generic sound driver code.  Required for all of the
>! 	      following sound cards except <literal>pca</literal> and
>!               <literal>pcm</literal>.</para>
>  	  </listitem>
>  	</varlistentry>
>  	
>***************
>*** 1554,1560 ****
>        
>        <note>
>  	<para>There is some additional documentation in
>! 	  <filename>/usr/src/sys/i386/isa/sound/</filename>. Also, if
>  	  you add any of these devices, be sure to create the sound <link
>  	    linkend="kernelconfig-nodes">device nodes</link>.</para>
>        </note>
>--- 1587,1594 ----
>        
>        <note>
>  	<para>There is some additional documentation in
>! 	  <filename>/usr/src/sys/i386/isa/sound/</filename> and
>! 	  <filename>/usr/src/sys/i386/isa/snd/</filename>. Also, if
>  	  you add any of these devices, be sure to create the sound <link
>  	    linkend="kernelconfig-nodes">device nodes</link>.</para>
>        </note>
>***************
>*** 1716,1734 ****
>        add is:</para>
>      
>      <programlisting>
>! controller wcd0</programlisting>
>  
>      <para>This means that you should look for some entries that start with
>!       <filename>wcd0</filename> in the <filename>/dev</filename> directory,
>        possibly followed by a letter, such as <literal>c</literal>, or preceded
>        by the letter <literal>r</literal>, which means a &ldquo;raw&rdquo;
>        device.  It turns out that those files are not there, so I must change
>        to the <filename>/dev</filename> directory and type:</para>
>      
>!     <screen>&prompt.root; <userinput>sh MAKEDEV wcd0</userinput></screen>
>  	  
>      <para>When this script finishes, you will find that there are now
>!       <filename>wcd0c</filename> and <filename>rwcd0c</filename> entries in
>        <filename>/dev</filename> so you know that it executed correctly.</para>
>  	
>      <para>For sound cards, the command:
>--- 1750,1768 ----
>        add is:</para>
>      
>      <programlisting>
>! device acd0</programlisting>
>  
>      <para>This means that you should look for some entries that start with
>!       <filename>acd0</filename> in the <filename>/dev</filename> directory,
>        possibly followed by a letter, such as <literal>c</literal>, or preceded
>        by the letter <literal>r</literal>, which means a &ldquo;raw&rdquo;
>        device.  It turns out that those files are not there, so I must change
>        to the <filename>/dev</filename> directory and type:</para>
>      
>!     <screen>&prompt.root; <userinput>sh MAKEDEV acd0</userinput></screen>
>  	  
>      <para>When this script finishes, you will find that there are now
>!       <filename>acd0c</filename> and <filename>racd0c</filename> entries in
>        <filename>/dev</filename> so you know that it executed correctly.</para>
>  	
>      <para>For sound cards, the command:

Actions: View | Diff

Attachments on bug 13946: 6019