diff -ruN --exclude=CVS /usr/ports/audio/soundtouch/Makefile /home/trasz/soundtouch/Makefile --- /usr/ports/audio/soundtouch/Makefile Wed Oct 4 00:54:04 2006 +++ /home/trasz/soundtouch/Makefile Fri Dec 8 23:19:40 2006 @@ -6,18 +6,24 @@ # PORTNAME= soundtouch -DISTVERSION= 1.3.0 +DISTVERSION= 1.3.1 CATEGORIES= audio -MASTER_SITES= http://users.tkk.fi/~oparviai/ -DISTNAME= ${PORTNAME}_v${PORTVERSION} +MASTER_SITES= http://www.surina.net/soundtouch/ MAINTAINER= danfe@FreeBSD.org COMMENT= An open-source audio processing library GNU_CONFIGURE= yes -USE_ZIP= yes +USE_GMAKE= yes -WRKSRC= ${WRKDIR}/SoundTouch-${PORTVERSION} +# For some reason this library contains config/ directory with +# lots of broken symlinks. Remove them here and add new one using +# files/patch-config. Files were taken from... Audacity, which is +# distributed with it's own version of SoundTouch ;-) +pre-patch: + ${RM} -rf ${WRKSRC}/config/* + ${FIND} ${WRKSRC} -name "Makefile.in*" -type f | ${XARGS} ${REINPLACE_CMD} -e \ + 's|[(]libdir[)]/pkgconfig|(prefix)/libdata/pkgconfig|g' post-patch: .SILENT ${REINPLACE_CMD} -e 's|-O3|${CFLAGS}|; s|$$(prefix)/doc|$$(datadir)/doc|' \ @@ -27,6 +33,7 @@ ${WRKSRC}/include/Makefile.in ${WRKSRC}/Makefile.in # Fix for GCC 4.x ${REINPLACE_CMD} -e 's|SoundTouch::||' ${WRKSRC}/include/SoundTouch.h + ${CHMOD} +rx ${WRKSRC}/config/install-sh .if defined(NOPORTDOCS) @${REINPLACE_CMD} -e 's/ install-pkgdocDATA$$//' \ ${WRKSRC}/Makefile.in diff -ruN --exclude=CVS /usr/ports/audio/soundtouch/distinfo /home/trasz/soundtouch/distinfo --- /usr/ports/audio/soundtouch/distinfo Wed Nov 30 15:01:29 2005 +++ /home/trasz/soundtouch/distinfo Fri Dec 8 23:19:13 2006 @@ -1,3 +1,3 @@ -MD5 (soundtouch_v1.3.0.zip) = 5c2d3f54320e5197885b3462f5f35a15 -SHA256 (soundtouch_v1.3.0.zip) = 14b3ebb416fb7edf4cafe680aa4a84d5548c9b2fc0174a00996282d3e29fa09d -SIZE (soundtouch_v1.3.0.zip) = 436780 +MD5 (soundtouch-1.3.1.tar.gz) = 5e0185e81dbba2f2eed8581b7664ab04 +SHA256 (soundtouch-1.3.1.tar.gz) = f268fb05200fc55e50e88772765a822628f1a0157a4a57cc9545ac50a0d4fd9c +SIZE (soundtouch-1.3.1.tar.gz) = 314641 diff -ruN --exclude=CVS /usr/ports/audio/soundtouch/files/patch-config /home/trasz/soundtouch/files/patch-config --- /usr/ports/audio/soundtouch/files/patch-config Thu Jan 1 01:00:00 1970 +++ /home/trasz/soundtouch/files/patch-config Fri Dec 8 23:19:21 2006 @@ -0,0 +1,11181 @@ +diff -urN /var/empty/README.TXT config/README.TXT +--- /var/empty/README.TXT Thu Jan 1 01:00:00 1970 ++++ config/README.TXT Wed Nov 15 05:12:11 2006 +@@ -0,0 +1,3 @@ ++Files in this directory are used by GNU autoconf/automake system. ++These files aren't used/needed in the Windows environment. ++ +diff -urN /var/empty/am_include.mk config/am_include.mk +--- /var/empty/am_include.mk Thu Jan 1 01:00:00 1970 ++++ config/am_include.mk Wed Nov 15 05:12:11 2006 +@@ -0,0 +1,51 @@ ++## vim:tw=78 ++## Process this file with automake to create Makefile.in ++## ++## $Id: am_include.mk,v 1.1.1.1.2.3 2006/04/08 14:14:10 richardash1981 Exp $ ++## ++## Copyright (C) 2003 - David W. Durham ++## ++## This file is part of SoundTouch, an audio processing library for pitch/time adjustments ++## ++## SoundTouch is free software; you can redistribute it and/or modify it under the ++## terms of the GNU General Public License as published by the Free Software ++## Foundation; either version 2 of the License, or (at your option) any later ++## version. ++## ++## SoundTouch is distributed in the hope that it will be useful, but WITHOUT ANY ++## WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR ++## A PARTICULAR PURPOSE. See the GNU General Public License for more details. ++## ++## You should have received a copy of the GNU General Public License along with ++## this program; if not, write to the Free Software Foundation, Inc., 59 Temple ++## Place - Suite 330, Boston, MA 02111-1307, USA ++ ++## These are common definitions used in all Makefiles ++## It is actually included when a makefile.am is coverted to Makefile.in ++## by automake, so it's ok to have @MACROS@ that will be set by configure ++ ++ ++## INCLUDES is automatically added to CXXFLAGS at compile time. The ++## $(top_srcdir) macro is set by configure. It's important to use $(top_srcdir) ++## in case a user decides to build in a separate directory from the base package ++## directory. Using absolute, or relative paths is a bad idea. ++INCLUDES=-I$(top_srcdir)/include ++ ++ ++## CXXFLAGS is also automatically added to the $(CXX) macro at compile time, and ++## is passed down to the children as well ++## I list these here in case there needs to always be some flags passed to the compiler ++CXXFLAGS=@CXXFLAGS@ ++ ++ ++## LDFLAGS will be added at link time ++## note that the -l flags are set by the LIBS macro that is set by configure ++## This line doesn't need to be here, configure will add LDFLAGS on it's own, ++## but I'm leaving here as a place to add LDFLAGS if so desired ++LDFLAGS=@LDFLAGS@ ++ ++ ++# doc directory ++pkgdocdir=$(prefix)/doc/@PACKAGE@ ++ ++ +diff -urN /var/empty/config.guess config/config.guess +--- /var/empty/config.guess Thu Jan 1 01:00:00 1970 ++++ config/config.guess Fri Dec 8 22:53:21 2006 +@@ -0,0 +1,1407 @@ ++#! /bin/sh ++# Attempt to guess a canonical system name. ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, ++# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. ++ ++timestamp='2003-07-02' ++ ++# This file is free software; you can redistribute it and/or modify it ++# under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, but ++# WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. ++ ++# Originally written by Per Bothner . ++# Please send patches to . Submit a context ++# diff and a properly formatted ChangeLog entry. ++# ++# This script attempts to guess a canonical system name similar to ++# config.sub. If it succeeds, it prints the system name on stdout, and ++# exits with 0. Otherwise, it exits with 1. ++# ++# The plan is that this can be called by configure scripts if you ++# don't specify an explicit build system type. ++ ++me=`echo "$0" | sed -e 's,.*/,,'` ++ ++usage="\ ++Usage: $0 [OPTION] ++ ++Output the configuration name of the system \`$me' is run on. ++ ++Operation modes: ++ -h, --help print this help, then exit ++ -t, --time-stamp print date of last modification, then exit ++ -v, --version print version number, then exit ++ ++Report bugs and patches to ." ++ ++version="\ ++GNU config.guess ($timestamp) ++ ++Originally written by Per Bothner. ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 ++Free Software Foundation, Inc. ++ ++This is free software; see the source for copying conditions. There is NO ++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." ++ ++help=" ++Try \`$me --help' for more information." ++ ++# Parse command line ++while test $# -gt 0 ; do ++ case $1 in ++ --time-stamp | --time* | -t ) ++ echo "$timestamp" ; exit 0 ;; ++ --version | -v ) ++ echo "$version" ; exit 0 ;; ++ --help | --h* | -h ) ++ echo "$usage"; exit 0 ;; ++ -- ) # Stop option processing ++ shift; break ;; ++ - ) # Use stdin as input. ++ break ;; ++ -* ) ++ echo "$me: invalid option $1$help" >&2 ++ exit 1 ;; ++ * ) ++ break ;; ++ esac ++done ++ ++if test $# != 0; then ++ echo "$me: too many arguments$help" >&2 ++ exit 1 ++fi ++ ++trap 'exit 1' 1 2 15 ++ ++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a ++# compiler to aid in system detection is discouraged as it requires ++# temporary files to be created and, as you can see below, it is a ++# headache to deal with in a portable fashion. ++ ++# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still ++# use `HOST_CC' if defined, but it is deprecated. ++ ++# Portable tmp directory creation inspired by the Autoconf team. ++ ++set_cc_for_build=' ++trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; ++trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; ++: ${TMPDIR=/tmp} ; ++ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || ++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || ++ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || ++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; ++dummy=$tmp/dummy ; ++tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; ++case $CC_FOR_BUILD,$HOST_CC,$CC in ++ ,,) echo "int x;" > $dummy.c ; ++ for c in cc gcc c89 c99 ; do ++ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then ++ CC_FOR_BUILD="$c"; break ; ++ fi ; ++ done ; ++ if test x"$CC_FOR_BUILD" = x ; then ++ CC_FOR_BUILD=no_compiler_found ; ++ fi ++ ;; ++ ,,*) CC_FOR_BUILD=$CC ;; ++ ,*,*) CC_FOR_BUILD=$HOST_CC ;; ++esac ;' ++ ++# This is needed to find uname on a Pyramid OSx when run in the BSD universe. ++# (ghazi@noc.rutgers.edu 1994-08-24) ++if (test -f /.attbin/uname) >/dev/null 2>&1 ; then ++ PATH=$PATH:/.attbin ; export PATH ++fi ++ ++UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown ++UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown ++UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown ++UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown ++ ++# Note: order is significant - the case branches are not exclusive. ++ ++case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in ++ *:NetBSD:*:*) ++ # NetBSD (nbsd) targets should (where applicable) match one or ++ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, ++ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently ++ # switched to ELF, *-*-netbsd* would select the old ++ # object file format. This provides both forward ++ # compatibility and a consistent mechanism for selecting the ++ # object file format. ++ # ++ # Note: NetBSD doesn't particularly care about the vendor ++ # portion of the name. We always set it to "unknown". ++ sysctl="sysctl -n hw.machine_arch" ++ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ ++ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` ++ case "${UNAME_MACHINE_ARCH}" in ++ armeb) machine=armeb-unknown ;; ++ arm*) machine=arm-unknown ;; ++ sh3el) machine=shl-unknown ;; ++ sh3eb) machine=sh-unknown ;; ++ *) machine=${UNAME_MACHINE_ARCH}-unknown ;; ++ esac ++ # The Operating System including object format, if it has switched ++ # to ELF recently, or will in the future. ++ case "${UNAME_MACHINE_ARCH}" in ++ arm*|i386|m68k|ns32k|sh3*|sparc|vax) ++ eval $set_cc_for_build ++ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ ++ | grep __ELF__ >/dev/null ++ then ++ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). ++ # Return netbsd for either. FIX? ++ os=netbsd ++ else ++ os=netbsdelf ++ fi ++ ;; ++ *) ++ os=netbsd ++ ;; ++ esac ++ # The OS release ++ # Debian GNU/NetBSD machines have a different userland, and ++ # thus, need a distinct triplet. However, they do not need ++ # kernel version information, so it can be replaced with a ++ # suitable tag, in the style of linux-gnu. ++ case "${UNAME_VERSION}" in ++ Debian*) ++ release='-gnu' ++ ;; ++ *) ++ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ++ ;; ++ esac ++ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: ++ # contains redundant information, the shorter form: ++ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. ++ echo "${machine}-${os}${release}" ++ exit 0 ;; ++ amiga:OpenBSD:*:*) ++ echo m68k-unknown-openbsd${UNAME_RELEASE} ++ exit 0 ;; ++ arc:OpenBSD:*:*) ++ echo mipsel-unknown-openbsd${UNAME_RELEASE} ++ exit 0 ;; ++ hp300:OpenBSD:*:*) ++ echo m68k-unknown-openbsd${UNAME_RELEASE} ++ exit 0 ;; ++ mac68k:OpenBSD:*:*) ++ echo m68k-unknown-openbsd${UNAME_RELEASE} ++ exit 0 ;; ++ macppc:OpenBSD:*:*) ++ echo powerpc-unknown-openbsd${UNAME_RELEASE} ++ exit 0 ;; ++ mvme68k:OpenBSD:*:*) ++ echo m68k-unknown-openbsd${UNAME_RELEASE} ++ exit 0 ;; ++ mvme88k:OpenBSD:*:*) ++ echo m88k-unknown-openbsd${UNAME_RELEASE} ++ exit 0 ;; ++ mvmeppc:OpenBSD:*:*) ++ echo powerpc-unknown-openbsd${UNAME_RELEASE} ++ exit 0 ;; ++ pmax:OpenBSD:*:*) ++ echo mipsel-unknown-openbsd${UNAME_RELEASE} ++ exit 0 ;; ++ sgi:OpenBSD:*:*) ++ echo mipseb-unknown-openbsd${UNAME_RELEASE} ++ exit 0 ;; ++ sun3:OpenBSD:*:*) ++ echo m68k-unknown-openbsd${UNAME_RELEASE} ++ exit 0 ;; ++ wgrisc:OpenBSD:*:*) ++ echo mipsel-unknown-openbsd${UNAME_RELEASE} ++ exit 0 ;; ++ *:OpenBSD:*:*) ++ echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} ++ exit 0 ;; ++ alpha:OSF1:*:*) ++ if test $UNAME_RELEASE = "V4.0"; then ++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ++ fi ++ # According to Compaq, /usr/sbin/psrinfo has been available on ++ # OSF/1 and Tru64 systems produced since 1995. I hope that ++ # covers most systems running today. This code pipes the CPU ++ # types through head -n 1, so we only detect the type of CPU 0. ++ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` ++ case "$ALPHA_CPU_TYPE" in ++ "EV4 (21064)") ++ UNAME_MACHINE="alpha" ;; ++ "EV4.5 (21064)") ++ UNAME_MACHINE="alpha" ;; ++ "LCA4 (21066/21068)") ++ UNAME_MACHINE="alpha" ;; ++ "EV5 (21164)") ++ UNAME_MACHINE="alphaev5" ;; ++ "EV5.6 (21164A)") ++ UNAME_MACHINE="alphaev56" ;; ++ "EV5.6 (21164PC)") ++ UNAME_MACHINE="alphapca56" ;; ++ "EV5.7 (21164PC)") ++ UNAME_MACHINE="alphapca57" ;; ++ "EV6 (21264)") ++ UNAME_MACHINE="alphaev6" ;; ++ "EV6.7 (21264A)") ++ UNAME_MACHINE="alphaev67" ;; ++ "EV6.8CB (21264C)") ++ UNAME_MACHINE="alphaev68" ;; ++ "EV6.8AL (21264B)") ++ UNAME_MACHINE="alphaev68" ;; ++ "EV6.8CX (21264D)") ++ UNAME_MACHINE="alphaev68" ;; ++ "EV6.9A (21264/EV69A)") ++ UNAME_MACHINE="alphaev69" ;; ++ "EV7 (21364)") ++ UNAME_MACHINE="alphaev7" ;; ++ "EV7.9 (21364A)") ++ UNAME_MACHINE="alphaev79" ;; ++ esac ++ # A Vn.n version is a released version. ++ # A Tn.n version is a released field test version. ++ # A Xn.n version is an unreleased experimental baselevel. ++ # 1.2 uses "1.2" for uname -r. ++ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` ++ exit 0 ;; ++ Alpha*:OpenVMS:*:*) ++ echo alpha-hp-vms ++ exit 0 ;; ++ Alpha\ *:Windows_NT*:*) ++ # How do we know it's Interix rather than the generic POSIX subsystem? ++ # Should we change UNAME_MACHINE based on the output of uname instead ++ # of the specific Alpha model? ++ echo alpha-pc-interix ++ exit 0 ;; ++ 21064:Windows_NT:50:3) ++ echo alpha-dec-winnt3.5 ++ exit 0 ;; ++ Amiga*:UNIX_System_V:4.0:*) ++ echo m68k-unknown-sysv4 ++ exit 0;; ++ *:[Aa]miga[Oo][Ss]:*:*) ++ echo ${UNAME_MACHINE}-unknown-amigaos ++ exit 0 ;; ++ *:[Mm]orph[Oo][Ss]:*:*) ++ echo ${UNAME_MACHINE}-unknown-morphos ++ exit 0 ;; ++ *:OS/390:*:*) ++ echo i370-ibm-openedition ++ exit 0 ;; ++ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) ++ echo arm-acorn-riscix${UNAME_RELEASE} ++ exit 0;; ++ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) ++ echo hppa1.1-hitachi-hiuxmpp ++ exit 0;; ++ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) ++ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. ++ if test "`(/bin/universe) 2>/dev/null`" = att ; then ++ echo pyramid-pyramid-sysv3 ++ else ++ echo pyramid-pyramid-bsd ++ fi ++ exit 0 ;; ++ NILE*:*:*:dcosx) ++ echo pyramid-pyramid-svr4 ++ exit 0 ;; ++ DRS?6000:unix:4.0:6*) ++ echo sparc-icl-nx6 ++ exit 0 ;; ++ DRS?6000:UNIX_SV:4.2*:7*) ++ case `/usr/bin/uname -p` in ++ sparc) echo sparc-icl-nx7 && exit 0 ;; ++ esac ;; ++ sun4H:SunOS:5.*:*) ++ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` ++ exit 0 ;; ++ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) ++ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` ++ exit 0 ;; ++ i86pc:SunOS:5.*:*) ++ echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` ++ exit 0 ;; ++ sun4*:SunOS:6*:*) ++ # According to config.sub, this is the proper way to canonicalize ++ # SunOS6. Hard to guess exactly what SunOS6 will be like, but ++ # it's likely to be more like Solaris than SunOS4. ++ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` ++ exit 0 ;; ++ sun4*:SunOS:*:*) ++ case "`/usr/bin/arch -k`" in ++ Series*|S4*) ++ UNAME_RELEASE=`uname -v` ++ ;; ++ esac ++ # Japanese Language versions have a version number like `4.1.3-JL'. ++ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` ++ exit 0 ;; ++ sun3*:SunOS:*:*) ++ echo m68k-sun-sunos${UNAME_RELEASE} ++ exit 0 ;; ++ sun*:*:4.2BSD:*) ++ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` ++ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 ++ case "`/bin/arch`" in ++ sun3) ++ echo m68k-sun-sunos${UNAME_RELEASE} ++ ;; ++ sun4) ++ echo sparc-sun-sunos${UNAME_RELEASE} ++ ;; ++ esac ++ exit 0 ;; ++ aushp:SunOS:*:*) ++ echo sparc-auspex-sunos${UNAME_RELEASE} ++ exit 0 ;; ++ # The situation for MiNT is a little confusing. The machine name ++ # can be virtually everything (everything which is not ++ # "atarist" or "atariste" at least should have a processor ++ # > m68000). The system name ranges from "MiNT" over "FreeMiNT" ++ # to the lowercase version "mint" (or "freemint"). Finally ++ # the system name "TOS" denotes a system which is actually not ++ # MiNT. But MiNT is downward compatible to TOS, so this should ++ # be no problem. ++ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) ++ echo m68k-atari-mint${UNAME_RELEASE} ++ exit 0 ;; ++ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) ++ echo m68k-atari-mint${UNAME_RELEASE} ++ exit 0 ;; ++ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) ++ echo m68k-atari-mint${UNAME_RELEASE} ++ exit 0 ;; ++ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) ++ echo m68k-milan-mint${UNAME_RELEASE} ++ exit 0 ;; ++ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) ++ echo m68k-hades-mint${UNAME_RELEASE} ++ exit 0 ;; ++ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) ++ echo m68k-unknown-mint${UNAME_RELEASE} ++ exit 0 ;; ++ powerpc:machten:*:*) ++ echo powerpc-apple-machten${UNAME_RELEASE} ++ exit 0 ;; ++ RISC*:Mach:*:*) ++ echo mips-dec-mach_bsd4.3 ++ exit 0 ;; ++ RISC*:ULTRIX:*:*) ++ echo mips-dec-ultrix${UNAME_RELEASE} ++ exit 0 ;; ++ VAX*:ULTRIX*:*:*) ++ echo vax-dec-ultrix${UNAME_RELEASE} ++ exit 0 ;; ++ 2020:CLIX:*:* | 2430:CLIX:*:*) ++ echo clipper-intergraph-clix${UNAME_RELEASE} ++ exit 0 ;; ++ mips:*:*:UMIPS | mips:*:*:RISCos) ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++#ifdef __cplusplus ++#include /* for printf() prototype */ ++ int main (int argc, char *argv[]) { ++#else ++ int main (argc, argv) int argc; char *argv[]; { ++#endif ++ #if defined (host_mips) && defined (MIPSEB) ++ #if defined (SYSTYPE_SYSV) ++ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); ++ #endif ++ #if defined (SYSTYPE_SVR4) ++ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); ++ #endif ++ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) ++ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); ++ #endif ++ #endif ++ exit (-1); ++ } ++EOF ++ $CC_FOR_BUILD -o $dummy $dummy.c \ ++ && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ ++ && exit 0 ++ echo mips-mips-riscos${UNAME_RELEASE} ++ exit 0 ;; ++ Motorola:PowerMAX_OS:*:*) ++ echo powerpc-motorola-powermax ++ exit 0 ;; ++ Motorola:*:4.3:PL8-*) ++ echo powerpc-harris-powermax ++ exit 0 ;; ++ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) ++ echo powerpc-harris-powermax ++ exit 0 ;; ++ Night_Hawk:Power_UNIX:*:*) ++ echo powerpc-harris-powerunix ++ exit 0 ;; ++ m88k:CX/UX:7*:*) ++ echo m88k-harris-cxux7 ++ exit 0 ;; ++ m88k:*:4*:R4*) ++ echo m88k-motorola-sysv4 ++ exit 0 ;; ++ m88k:*:3*:R3*) ++ echo m88k-motorola-sysv3 ++ exit 0 ;; ++ AViiON:dgux:*:*) ++ # DG/UX returns AViiON for all architectures ++ UNAME_PROCESSOR=`/usr/bin/uname -p` ++ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] ++ then ++ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ ++ [ ${TARGET_BINARY_INTERFACE}x = x ] ++ then ++ echo m88k-dg-dgux${UNAME_RELEASE} ++ else ++ echo m88k-dg-dguxbcs${UNAME_RELEASE} ++ fi ++ else ++ echo i586-dg-dgux${UNAME_RELEASE} ++ fi ++ exit 0 ;; ++ M88*:DolphinOS:*:*) # DolphinOS (SVR3) ++ echo m88k-dolphin-sysv3 ++ exit 0 ;; ++ M88*:*:R3*:*) ++ # Delta 88k system running SVR3 ++ echo m88k-motorola-sysv3 ++ exit 0 ;; ++ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) ++ echo m88k-tektronix-sysv3 ++ exit 0 ;; ++ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) ++ echo m68k-tektronix-bsd ++ exit 0 ;; ++ *:IRIX*:*:*) ++ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` ++ exit 0 ;; ++ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. ++ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id ++ exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' ++ i*86:AIX:*:*) ++ echo i386-ibm-aix ++ exit 0 ;; ++ ia64:AIX:*:*) ++ if [ -x /usr/bin/oslevel ] ; then ++ IBM_REV=`/usr/bin/oslevel` ++ else ++ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} ++ fi ++ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} ++ exit 0 ;; ++ *:AIX:2:3) ++ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ #include ++ ++ main() ++ { ++ if (!__power_pc()) ++ exit(1); ++ puts("powerpc-ibm-aix3.2.5"); ++ exit(0); ++ } ++EOF ++ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 ++ echo rs6000-ibm-aix3.2.5 ++ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then ++ echo rs6000-ibm-aix3.2.4 ++ else ++ echo rs6000-ibm-aix3.2 ++ fi ++ exit 0 ;; ++ *:AIX:*:[45]) ++ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` ++ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then ++ IBM_ARCH=rs6000 ++ else ++ IBM_ARCH=powerpc ++ fi ++ if [ -x /usr/bin/oslevel ] ; then ++ IBM_REV=`/usr/bin/oslevel` ++ else ++ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} ++ fi ++ echo ${IBM_ARCH}-ibm-aix${IBM_REV} ++ exit 0 ;; ++ *:AIX:*:*) ++ echo rs6000-ibm-aix ++ exit 0 ;; ++ ibmrt:4.4BSD:*|romp-ibm:BSD:*) ++ echo romp-ibm-bsd4.4 ++ exit 0 ;; ++ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and ++ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to ++ exit 0 ;; # report: romp-ibm BSD 4.3 ++ *:BOSX:*:*) ++ echo rs6000-bull-bosx ++ exit 0 ;; ++ DPX/2?00:B.O.S.:*:*) ++ echo m68k-bull-sysv3 ++ exit 0 ;; ++ 9000/[34]??:4.3bsd:1.*:*) ++ echo m68k-hp-bsd ++ exit 0 ;; ++ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) ++ echo m68k-hp-bsd4.4 ++ exit 0 ;; ++ 9000/[34678]??:HP-UX:*:*) ++ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` ++ case "${UNAME_MACHINE}" in ++ 9000/31? ) HP_ARCH=m68000 ;; ++ 9000/[34]?? ) HP_ARCH=m68k ;; ++ 9000/[678][0-9][0-9]) ++ if [ -x /usr/bin/getconf ]; then ++ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` ++ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` ++ case "${sc_cpu_version}" in ++ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 ++ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 ++ 532) # CPU_PA_RISC2_0 ++ case "${sc_kernel_bits}" in ++ 32) HP_ARCH="hppa2.0n" ;; ++ 64) HP_ARCH="hppa2.0w" ;; ++ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 ++ esac ;; ++ esac ++ fi ++ if [ "${HP_ARCH}" = "" ]; then ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ ++ #define _HPUX_SOURCE ++ #include ++ #include ++ ++ int main () ++ { ++ #if defined(_SC_KERNEL_BITS) ++ long bits = sysconf(_SC_KERNEL_BITS); ++ #endif ++ long cpu = sysconf (_SC_CPU_VERSION); ++ ++ switch (cpu) ++ { ++ case CPU_PA_RISC1_0: puts ("hppa1.0"); break; ++ case CPU_PA_RISC1_1: puts ("hppa1.1"); break; ++ case CPU_PA_RISC2_0: ++ #if defined(_SC_KERNEL_BITS) ++ switch (bits) ++ { ++ case 64: puts ("hppa2.0w"); break; ++ case 32: puts ("hppa2.0n"); break; ++ default: puts ("hppa2.0"); break; ++ } break; ++ #else /* !defined(_SC_KERNEL_BITS) */ ++ puts ("hppa2.0"); break; ++ #endif ++ default: puts ("hppa1.0"); break; ++ } ++ exit (0); ++ } ++EOF ++ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` ++ test -z "$HP_ARCH" && HP_ARCH=hppa ++ fi ;; ++ esac ++ if [ ${HP_ARCH} = "hppa2.0w" ] ++ then ++ # avoid double evaluation of $set_cc_for_build ++ test -n "$CC_FOR_BUILD" || eval $set_cc_for_build ++ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null ++ then ++ HP_ARCH="hppa2.0w" ++ else ++ HP_ARCH="hppa64" ++ fi ++ fi ++ echo ${HP_ARCH}-hp-hpux${HPUX_REV} ++ exit 0 ;; ++ ia64:HP-UX:*:*) ++ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` ++ echo ia64-hp-hpux${HPUX_REV} ++ exit 0 ;; ++ 3050*:HI-UX:*:*) ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ #include ++ int ++ main () ++ { ++ long cpu = sysconf (_SC_CPU_VERSION); ++ /* The order matters, because CPU_IS_HP_MC68K erroneously returns ++ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct ++ results, however. */ ++ if (CPU_IS_PA_RISC (cpu)) ++ { ++ switch (cpu) ++ { ++ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; ++ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; ++ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; ++ default: puts ("hppa-hitachi-hiuxwe2"); break; ++ } ++ } ++ else if (CPU_IS_HP_MC68K (cpu)) ++ puts ("m68k-hitachi-hiuxwe2"); ++ else puts ("unknown-hitachi-hiuxwe2"); ++ exit (0); ++ } ++EOF ++ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 ++ echo unknown-hitachi-hiuxwe2 ++ exit 0 ;; ++ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) ++ echo hppa1.1-hp-bsd ++ exit 0 ;; ++ 9000/8??:4.3bsd:*:*) ++ echo hppa1.0-hp-bsd ++ exit 0 ;; ++ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) ++ echo hppa1.0-hp-mpeix ++ exit 0 ;; ++ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) ++ echo hppa1.1-hp-osf ++ exit 0 ;; ++ hp8??:OSF1:*:*) ++ echo hppa1.0-hp-osf ++ exit 0 ;; ++ i*86:OSF1:*:*) ++ if [ -x /usr/sbin/sysversion ] ; then ++ echo ${UNAME_MACHINE}-unknown-osf1mk ++ else ++ echo ${UNAME_MACHINE}-unknown-osf1 ++ fi ++ exit 0 ;; ++ parisc*:Lites*:*:*) ++ echo hppa1.1-hp-lites ++ exit 0 ;; ++ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) ++ echo c1-convex-bsd ++ exit 0 ;; ++ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) ++ if getsysinfo -f scalar_acc ++ then echo c32-convex-bsd ++ else echo c2-convex-bsd ++ fi ++ exit 0 ;; ++ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) ++ echo c34-convex-bsd ++ exit 0 ;; ++ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) ++ echo c38-convex-bsd ++ exit 0 ;; ++ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) ++ echo c4-convex-bsd ++ exit 0 ;; ++ CRAY*Y-MP:*:*:*) ++ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' ++ exit 0 ;; ++ CRAY*[A-Z]90:*:*:*) ++ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ ++ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ ++ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ ++ -e 's/\.[^.]*$/.X/' ++ exit 0 ;; ++ CRAY*TS:*:*:*) ++ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' ++ exit 0 ;; ++ CRAY*T3E:*:*:*) ++ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' ++ exit 0 ;; ++ CRAY*SV1:*:*:*) ++ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' ++ exit 0 ;; ++ *:UNICOS/mp:*:*) ++ echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' ++ exit 0 ;; ++ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) ++ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` ++ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` ++ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` ++ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ++ exit 0 ;; ++ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) ++ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} ++ exit 0 ;; ++ sparc*:BSD/OS:*:*) ++ echo sparc-unknown-bsdi${UNAME_RELEASE} ++ exit 0 ;; ++ *:BSD/OS:*:*) ++ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} ++ exit 0 ;; ++ *:FreeBSD:*:*|*:GNU/FreeBSD:*:*) ++ # Determine whether the default compiler uses glibc. ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ #include ++ #if __GLIBC__ >= 2 ++ LIBC=gnu ++ #else ++ LIBC= ++ #endif ++EOF ++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` ++ # GNU/FreeBSD systems have a "k" prefix to indicate we are using ++ # FreeBSD's kernel, but not the complete OS. ++ case ${LIBC} in gnu) kernel_only='k' ;; esac ++ echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} ++ exit 0 ;; ++ i*:CYGWIN*:*) ++ echo ${UNAME_MACHINE}-pc-cygwin ++ exit 0 ;; ++ i*:MINGW*:*) ++ echo ${UNAME_MACHINE}-pc-mingw32 ++ exit 0 ;; ++ i*:PW*:*) ++ echo ${UNAME_MACHINE}-pc-pw32 ++ exit 0 ;; ++ x86:Interix*:[34]*) ++ echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' ++ exit 0 ;; ++ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) ++ echo i${UNAME_MACHINE}-pc-mks ++ exit 0 ;; ++ i*:Windows_NT*:* | Pentium*:Windows_NT*:*) ++ # How do we know it's Interix rather than the generic POSIX subsystem? ++ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we ++ # UNAME_MACHINE based on the output of uname instead of i386? ++ echo i586-pc-interix ++ exit 0 ;; ++ i*:UWIN*:*) ++ echo ${UNAME_MACHINE}-pc-uwin ++ exit 0 ;; ++ p*:CYGWIN*:*) ++ echo powerpcle-unknown-cygwin ++ exit 0 ;; ++ prep*:SunOS:5.*:*) ++ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` ++ exit 0 ;; ++ *:GNU:*:*) ++ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` ++ exit 0 ;; ++ i*86:Minix:*:*) ++ echo ${UNAME_MACHINE}-pc-minix ++ exit 0 ;; ++ arm*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit 0 ;; ++ cris:Linux:*:*) ++ echo cris-axis-linux-gnu ++ exit 0 ;; ++ ia64:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit 0 ;; ++ m68*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit 0 ;; ++ mips:Linux:*:*) ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ #undef CPU ++ #undef mips ++ #undef mipsel ++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) ++ CPU=mipsel ++ #else ++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) ++ CPU=mips ++ #else ++ CPU= ++ #endif ++ #endif ++EOF ++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` ++ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 ++ ;; ++ mips64:Linux:*:*) ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ #undef CPU ++ #undef mips64 ++ #undef mips64el ++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) ++ CPU=mips64el ++ #else ++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) ++ CPU=mips64 ++ #else ++ CPU= ++ #endif ++ #endif ++EOF ++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` ++ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 ++ ;; ++ ppc:Linux:*:*) ++ echo powerpc-unknown-linux-gnu ++ exit 0 ;; ++ ppc64:Linux:*:*) ++ echo powerpc64-unknown-linux-gnu ++ exit 0 ;; ++ alpha:Linux:*:*) ++ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in ++ EV5) UNAME_MACHINE=alphaev5 ;; ++ EV56) UNAME_MACHINE=alphaev56 ;; ++ PCA56) UNAME_MACHINE=alphapca56 ;; ++ PCA57) UNAME_MACHINE=alphapca56 ;; ++ EV6) UNAME_MACHINE=alphaev6 ;; ++ EV67) UNAME_MACHINE=alphaev67 ;; ++ EV68*) UNAME_MACHINE=alphaev68 ;; ++ esac ++ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null ++ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi ++ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ++ exit 0 ;; ++ parisc:Linux:*:* | hppa:Linux:*:*) ++ # Look for CPU level ++ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in ++ PA7*) echo hppa1.1-unknown-linux-gnu ;; ++ PA8*) echo hppa2.0-unknown-linux-gnu ;; ++ *) echo hppa-unknown-linux-gnu ;; ++ esac ++ exit 0 ;; ++ parisc64:Linux:*:* | hppa64:Linux:*:*) ++ echo hppa64-unknown-linux-gnu ++ exit 0 ;; ++ s390:Linux:*:* | s390x:Linux:*:*) ++ echo ${UNAME_MACHINE}-ibm-linux ++ exit 0 ;; ++ sh64*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit 0 ;; ++ sh*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit 0 ;; ++ sparc:Linux:*:* | sparc64:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit 0 ;; ++ x86_64:Linux:*:*) ++ echo x86_64-unknown-linux-gnu ++ exit 0 ;; ++ i*86:Linux:*:*) ++ # The BFD linker knows what the default object file format is, so ++ # first see if it will tell us. cd to the root directory to prevent ++ # problems with other programs or directories called `ld' in the path. ++ # Set LC_ALL=C to ensure ld outputs messages in English. ++ ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ ++ | sed -ne '/supported targets:/!d ++ s/[ ][ ]*/ /g ++ s/.*supported targets: *// ++ s/ .*// ++ p'` ++ case "$ld_supported_targets" in ++ elf32-i386) ++ TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ++ ;; ++ a.out-i386-linux) ++ echo "${UNAME_MACHINE}-pc-linux-gnuaout" ++ exit 0 ;; ++ coff-i386) ++ echo "${UNAME_MACHINE}-pc-linux-gnucoff" ++ exit 0 ;; ++ "") ++ # Either a pre-BFD a.out linker (linux-gnuoldld) or ++ # one that does not give us useful --help. ++ echo "${UNAME_MACHINE}-pc-linux-gnuoldld" ++ exit 0 ;; ++ esac ++ # Determine whether the default compiler is a.out or elf ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ #include ++ #ifdef __ELF__ ++ # ifdef __GLIBC__ ++ # if __GLIBC__ >= 2 ++ LIBC=gnu ++ # else ++ LIBC=gnulibc1 ++ # endif ++ # else ++ LIBC=gnulibc1 ++ # endif ++ #else ++ #ifdef __INTEL_COMPILER ++ LIBC=gnu ++ #else ++ LIBC=gnuaout ++ #endif ++ #endif ++EOF ++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` ++ test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 ++ test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 ++ ;; ++ i*86:DYNIX/ptx:4*:*) ++ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. ++ # earlier versions are messed up and put the nodename in both ++ # sysname and nodename. ++ echo i386-sequent-sysv4 ++ exit 0 ;; ++ i*86:UNIX_SV:4.2MP:2.*) ++ # Unixware is an offshoot of SVR4, but it has its own version ++ # number series starting with 2... ++ # I am not positive that other SVR4 systems won't match this, ++ # I just have to hope. -- rms. ++ # Use sysv4.2uw... so that sysv4* matches it. ++ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} ++ exit 0 ;; ++ i*86:OS/2:*:*) ++ # If we were able to find `uname', then EMX Unix compatibility ++ # is probably installed. ++ echo ${UNAME_MACHINE}-pc-os2-emx ++ exit 0 ;; ++ i*86:XTS-300:*:STOP) ++ echo ${UNAME_MACHINE}-unknown-stop ++ exit 0 ;; ++ i*86:atheos:*:*) ++ echo ${UNAME_MACHINE}-unknown-atheos ++ exit 0 ;; ++ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) ++ echo i386-unknown-lynxos${UNAME_RELEASE} ++ exit 0 ;; ++ i*86:*DOS:*:*) ++ echo ${UNAME_MACHINE}-pc-msdosdjgpp ++ exit 0 ;; ++ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) ++ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` ++ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then ++ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} ++ else ++ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} ++ fi ++ exit 0 ;; ++ i*86:*:5:[78]*) ++ case `/bin/uname -X | grep "^Machine"` in ++ *486*) UNAME_MACHINE=i486 ;; ++ *Pentium) UNAME_MACHINE=i586 ;; ++ *Pent*|*Celeron) UNAME_MACHINE=i686 ;; ++ esac ++ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} ++ exit 0 ;; ++ i*86:*:3.2:*) ++ if test -f /usr/options/cb.name; then ++ UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then ++ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` ++ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 ++ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ ++ && UNAME_MACHINE=i586 ++ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ ++ && UNAME_MACHINE=i686 ++ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ ++ && UNAME_MACHINE=i686 ++ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL ++ else ++ echo ${UNAME_MACHINE}-pc-sysv32 ++ fi ++ exit 0 ;; ++ pc:*:*:*) ++ # Left here for compatibility: ++ # uname -m prints for DJGPP always 'pc', but it prints nothing about ++ # the processor, so we play safe by assuming i386. ++ echo i386-pc-msdosdjgpp ++ exit 0 ;; ++ Intel:Mach:3*:*) ++ echo i386-pc-mach3 ++ exit 0 ;; ++ paragon:*:*:*) ++ echo i860-intel-osf1 ++ exit 0 ;; ++ i860:*:4.*:*) # i860-SVR4 ++ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then ++ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 ++ else # Add other i860-SVR4 vendors below as they are discovered. ++ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 ++ fi ++ exit 0 ;; ++ mini*:CTIX:SYS*5:*) ++ # "miniframe" ++ echo m68010-convergent-sysv ++ exit 0 ;; ++ mc68k:UNIX:SYSTEM5:3.51m) ++ echo m68k-convergent-sysv ++ exit 0 ;; ++ M680?0:D-NIX:5.3:*) ++ echo m68k-diab-dnix ++ exit 0 ;; ++ M68*:*:R3V[567]*:*) ++ test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; ++ 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) ++ OS_REL='' ++ test -r /etc/.relid \ ++ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` ++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ ++ && echo i486-ncr-sysv4.3${OS_REL} && exit 0 ++ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ ++ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; ++ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) ++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ ++ && echo i486-ncr-sysv4 && exit 0 ;; ++ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) ++ echo m68k-unknown-lynxos${UNAME_RELEASE} ++ exit 0 ;; ++ mc68030:UNIX_System_V:4.*:*) ++ echo m68k-atari-sysv4 ++ exit 0 ;; ++ TSUNAMI:LynxOS:2.*:*) ++ echo sparc-unknown-lynxos${UNAME_RELEASE} ++ exit 0 ;; ++ rs6000:LynxOS:2.*:*) ++ echo rs6000-unknown-lynxos${UNAME_RELEASE} ++ exit 0 ;; ++ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) ++ echo powerpc-unknown-lynxos${UNAME_RELEASE} ++ exit 0 ;; ++ SM[BE]S:UNIX_SV:*:*) ++ echo mips-dde-sysv${UNAME_RELEASE} ++ exit 0 ;; ++ RM*:ReliantUNIX-*:*:*) ++ echo mips-sni-sysv4 ++ exit 0 ;; ++ RM*:SINIX-*:*:*) ++ echo mips-sni-sysv4 ++ exit 0 ;; ++ *:SINIX-*:*:*) ++ if uname -p 2>/dev/null >/dev/null ; then ++ UNAME_MACHINE=`(uname -p) 2>/dev/null` ++ echo ${UNAME_MACHINE}-sni-sysv4 ++ else ++ echo ns32k-sni-sysv ++ fi ++ exit 0 ;; ++ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort ++ # says ++ echo i586-unisys-sysv4 ++ exit 0 ;; ++ *:UNIX_System_V:4*:FTX*) ++ # From Gerald Hewes . ++ # How about differentiating between stratus architectures? -djm ++ echo hppa1.1-stratus-sysv4 ++ exit 0 ;; ++ *:*:*:FTX*) ++ # From seanf@swdc.stratus.com. ++ echo i860-stratus-sysv4 ++ exit 0 ;; ++ *:VOS:*:*) ++ # From Paul.Green@stratus.com. ++ echo hppa1.1-stratus-vos ++ exit 0 ;; ++ mc68*:A/UX:*:*) ++ echo m68k-apple-aux${UNAME_RELEASE} ++ exit 0 ;; ++ news*:NEWS-OS:6*:*) ++ echo mips-sony-newsos6 ++ exit 0 ;; ++ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) ++ if [ -d /usr/nec ]; then ++ echo mips-nec-sysv${UNAME_RELEASE} ++ else ++ echo mips-unknown-sysv${UNAME_RELEASE} ++ fi ++ exit 0 ;; ++ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. ++ echo powerpc-be-beos ++ exit 0 ;; ++ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. ++ echo powerpc-apple-beos ++ exit 0 ;; ++ BePC:BeOS:*:*) # BeOS running on Intel PC compatible. ++ echo i586-pc-beos ++ exit 0 ;; ++ SX-4:SUPER-UX:*:*) ++ echo sx4-nec-superux${UNAME_RELEASE} ++ exit 0 ;; ++ SX-5:SUPER-UX:*:*) ++ echo sx5-nec-superux${UNAME_RELEASE} ++ exit 0 ;; ++ SX-6:SUPER-UX:*:*) ++ echo sx6-nec-superux${UNAME_RELEASE} ++ exit 0 ;; ++ Power*:Rhapsody:*:*) ++ echo powerpc-apple-rhapsody${UNAME_RELEASE} ++ exit 0 ;; ++ *:Rhapsody:*:*) ++ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} ++ exit 0 ;; ++ *:Darwin:*:*) ++ case `uname -p` in ++ *86) UNAME_PROCESSOR=i686 ;; ++ powerpc) UNAME_PROCESSOR=powerpc ;; ++ esac ++ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} ++ exit 0 ;; ++ *:procnto*:*:* | *:QNX:[0123456789]*:*) ++ UNAME_PROCESSOR=`uname -p` ++ if test "$UNAME_PROCESSOR" = "x86"; then ++ UNAME_PROCESSOR=i386 ++ UNAME_MACHINE=pc ++ fi ++ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} ++ exit 0 ;; ++ *:QNX:*:4*) ++ echo i386-pc-qnx ++ exit 0 ;; ++ NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) ++ echo nsr-tandem-nsk${UNAME_RELEASE} ++ exit 0 ;; ++ *:NonStop-UX:*:*) ++ echo mips-compaq-nonstopux ++ exit 0 ;; ++ BS2000:POSIX*:*:*) ++ echo bs2000-siemens-sysv ++ exit 0 ;; ++ DS/*:UNIX_System_V:*:*) ++ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} ++ exit 0 ;; ++ *:Plan9:*:*) ++ # "uname -m" is not consistent, so use $cputype instead. 386 ++ # is converted to i386 for consistency with other x86 ++ # operating systems. ++ if test "$cputype" = "386"; then ++ UNAME_MACHINE=i386 ++ else ++ UNAME_MACHINE="$cputype" ++ fi ++ echo ${UNAME_MACHINE}-unknown-plan9 ++ exit 0 ;; ++ *:TOPS-10:*:*) ++ echo pdp10-unknown-tops10 ++ exit 0 ;; ++ *:TENEX:*:*) ++ echo pdp10-unknown-tenex ++ exit 0 ;; ++ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) ++ echo pdp10-dec-tops20 ++ exit 0 ;; ++ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) ++ echo pdp10-xkl-tops20 ++ exit 0 ;; ++ *:TOPS-20:*:*) ++ echo pdp10-unknown-tops20 ++ exit 0 ;; ++ *:ITS:*:*) ++ echo pdp10-unknown-its ++ exit 0 ;; ++ SEI:*:*:SEIUX) ++ echo mips-sei-seiux${UNAME_RELEASE} ++ exit 0 ;; ++esac ++ ++#echo '(No uname command or uname output not recognized.)' 1>&2 ++#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 ++ ++eval $set_cc_for_build ++cat >$dummy.c < ++# include ++#endif ++main () ++{ ++#if defined (sony) ++#if defined (MIPSEB) ++ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, ++ I don't know.... */ ++ printf ("mips-sony-bsd\n"); exit (0); ++#else ++#include ++ printf ("m68k-sony-newsos%s\n", ++#ifdef NEWSOS4 ++ "4" ++#else ++ "" ++#endif ++ ); exit (0); ++#endif ++#endif ++ ++#if defined (__arm) && defined (__acorn) && defined (__unix) ++ printf ("arm-acorn-riscix"); exit (0); ++#endif ++ ++#if defined (hp300) && !defined (hpux) ++ printf ("m68k-hp-bsd\n"); exit (0); ++#endif ++ ++#if defined (NeXT) ++#if !defined (__ARCHITECTURE__) ++#define __ARCHITECTURE__ "m68k" ++#endif ++ int version; ++ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; ++ if (version < 4) ++ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); ++ else ++ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); ++ exit (0); ++#endif ++ ++#if defined (MULTIMAX) || defined (n16) ++#if defined (UMAXV) ++ printf ("ns32k-encore-sysv\n"); exit (0); ++#else ++#if defined (CMU) ++ printf ("ns32k-encore-mach\n"); exit (0); ++#else ++ printf ("ns32k-encore-bsd\n"); exit (0); ++#endif ++#endif ++#endif ++ ++#if defined (__386BSD__) ++ printf ("i386-pc-bsd\n"); exit (0); ++#endif ++ ++#if defined (sequent) ++#if defined (i386) ++ printf ("i386-sequent-dynix\n"); exit (0); ++#endif ++#if defined (ns32000) ++ printf ("ns32k-sequent-dynix\n"); exit (0); ++#endif ++#endif ++ ++#if defined (_SEQUENT_) ++ struct utsname un; ++ ++ uname(&un); ++ ++ if (strncmp(un.version, "V2", 2) == 0) { ++ printf ("i386-sequent-ptx2\n"); exit (0); ++ } ++ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ ++ printf ("i386-sequent-ptx1\n"); exit (0); ++ } ++ printf ("i386-sequent-ptx\n"); exit (0); ++ ++#endif ++ ++#if defined (vax) ++# if !defined (ultrix) ++# include ++# if defined (BSD) ++# if BSD == 43 ++ printf ("vax-dec-bsd4.3\n"); exit (0); ++# else ++# if BSD == 199006 ++ printf ("vax-dec-bsd4.3reno\n"); exit (0); ++# else ++ printf ("vax-dec-bsd\n"); exit (0); ++# endif ++# endif ++# else ++ printf ("vax-dec-bsd\n"); exit (0); ++# endif ++# else ++ printf ("vax-dec-ultrix\n"); exit (0); ++# endif ++#endif ++ ++#if defined (alliant) && defined (i860) ++ printf ("i860-alliant-bsd\n"); exit (0); ++#endif ++ ++ exit (1); ++} ++EOF ++ ++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 ++ ++# Apollos put the system type in the environment. ++ ++test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } ++ ++# Convex versions that predate uname can use getsysinfo(1) ++ ++if [ -x /usr/convex/getsysinfo ] ++then ++ case `getsysinfo -f cpu_type` in ++ c1*) ++ echo c1-convex-bsd ++ exit 0 ;; ++ c2*) ++ if getsysinfo -f scalar_acc ++ then echo c32-convex-bsd ++ else echo c2-convex-bsd ++ fi ++ exit 0 ;; ++ c34*) ++ echo c34-convex-bsd ++ exit 0 ;; ++ c38*) ++ echo c38-convex-bsd ++ exit 0 ;; ++ c4*) ++ echo c4-convex-bsd ++ exit 0 ;; ++ esac ++fi ++ ++cat >&2 < in order to provide the needed ++information to handle your system. ++ ++config.guess timestamp = $timestamp ++ ++uname -m = `(uname -m) 2>/dev/null || echo unknown` ++uname -r = `(uname -r) 2>/dev/null || echo unknown` ++uname -s = `(uname -s) 2>/dev/null || echo unknown` ++uname -v = `(uname -v) 2>/dev/null || echo unknown` ++ ++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` ++/bin/uname -X = `(/bin/uname -X) 2>/dev/null` ++ ++hostinfo = `(hostinfo) 2>/dev/null` ++/bin/universe = `(/bin/universe) 2>/dev/null` ++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` ++/bin/arch = `(/bin/arch) 2>/dev/null` ++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` ++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` ++ ++UNAME_MACHINE = ${UNAME_MACHINE} ++UNAME_RELEASE = ${UNAME_RELEASE} ++UNAME_SYSTEM = ${UNAME_SYSTEM} ++UNAME_VERSION = ${UNAME_VERSION} ++EOF ++ ++exit 1 ++ ++# Local variables: ++# eval: (add-hook 'write-file-hooks 'time-stamp) ++# time-stamp-start: "timestamp='" ++# time-stamp-format: "%:y-%02m-%02d" ++# time-stamp-end: "'" ++# End: +diff -urN /var/empty/config.sub config/config.sub +--- /var/empty/config.sub Thu Jan 1 01:00:00 1970 ++++ config/config.sub Fri Dec 8 22:53:21 2006 +@@ -0,0 +1,1504 @@ ++#! /bin/sh ++# Configuration validation subroutine script. ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, ++# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. ++ ++timestamp='2003-07-04' ++ ++# This file is (in principle) common to ALL GNU software. ++# The presence of a machine in this file suggests that SOME GNU software ++# can handle that machine. It does not imply ALL GNU software can. ++# ++# This file is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place - Suite 330, ++# Boston, MA 02111-1307, USA. ++ ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. ++ ++# Please send patches to . Submit a context ++# diff and a properly formatted ChangeLog entry. ++# ++# Configuration subroutine to validate and canonicalize a configuration type. ++# Supply the specified configuration type as an argument. ++# If it is invalid, we print an error message on stderr and exit with code 1. ++# Otherwise, we print the canonical config type on stdout and succeed. ++ ++# This file is supposed to be the same for all GNU packages ++# and recognize all the CPU types, system types and aliases ++# that are meaningful with *any* GNU software. ++# Each package is responsible for reporting which valid configurations ++# it does not support. The user should be able to distinguish ++# a failure to support a valid configuration from a meaningless ++# configuration. ++ ++# The goal of this file is to map all the various variations of a given ++# machine specification into a single specification in the form: ++# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM ++# or in some cases, the newer four-part form: ++# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM ++# It is wrong to echo any other type of specification. ++ ++me=`echo "$0" | sed -e 's,.*/,,'` ++ ++usage="\ ++Usage: $0 [OPTION] CPU-MFR-OPSYS ++ $0 [OPTION] ALIAS ++ ++Canonicalize a configuration name. ++ ++Operation modes: ++ -h, --help print this help, then exit ++ -t, --time-stamp print date of last modification, then exit ++ -v, --version print version number, then exit ++ ++Report bugs and patches to ." ++ ++version="\ ++GNU config.sub ($timestamp) ++ ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 ++Free Software Foundation, Inc. ++ ++This is free software; see the source for copying conditions. There is NO ++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." ++ ++help=" ++Try \`$me --help' for more information." ++ ++# Parse command line ++while test $# -gt 0 ; do ++ case $1 in ++ --time-stamp | --time* | -t ) ++ echo "$timestamp" ; exit 0 ;; ++ --version | -v ) ++ echo "$version" ; exit 0 ;; ++ --help | --h* | -h ) ++ echo "$usage"; exit 0 ;; ++ -- ) # Stop option processing ++ shift; break ;; ++ - ) # Use stdin as input. ++ break ;; ++ -* ) ++ echo "$me: invalid option $1$help" ++ exit 1 ;; ++ ++ *local*) ++ # First pass through any local machine types. ++ echo $1 ++ exit 0;; ++ ++ * ) ++ break ;; ++ esac ++done ++ ++case $# in ++ 0) echo "$me: missing argument$help" >&2 ++ exit 1;; ++ 1) ;; ++ *) echo "$me: too many arguments$help" >&2 ++ exit 1;; ++esac ++ ++# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). ++# Here we must recognize all the valid KERNEL-OS combinations. ++maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` ++case $maybe_os in ++ nto-qnx* | linux-gnu* | kfreebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) ++ os=-$maybe_os ++ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ++ ;; ++ *) ++ basic_machine=`echo $1 | sed 's/-[^-]*$//'` ++ if [ $basic_machine != $1 ] ++ then os=`echo $1 | sed 's/.*-/-/'` ++ else os=; fi ++ ;; ++esac ++ ++### Let's recognize common machines as not being operating systems so ++### that things like config.sub decstation-3100 work. We also ++### recognize some manufacturers as not being operating systems, so we ++### can provide default operating systems below. ++case $os in ++ -sun*os*) ++ # Prevent following clause from handling this invalid input. ++ ;; ++ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ ++ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ ++ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ ++ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ ++ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ ++ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ ++ -apple | -axis) ++ os= ++ basic_machine=$1 ++ ;; ++ -sim | -cisco | -oki | -wec | -winbond) ++ os= ++ basic_machine=$1 ++ ;; ++ -scout) ++ ;; ++ -wrs) ++ os=-vxworks ++ basic_machine=$1 ++ ;; ++ -chorusos*) ++ os=-chorusos ++ basic_machine=$1 ++ ;; ++ -chorusrdb) ++ os=-chorusrdb ++ basic_machine=$1 ++ ;; ++ -hiux*) ++ os=-hiuxwe2 ++ ;; ++ -sco5) ++ os=-sco3.2v5 ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ++ ;; ++ -sco4) ++ os=-sco3.2v4 ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ++ ;; ++ -sco3.2.[4-9]*) ++ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ++ ;; ++ -sco3.2v[4-9]*) ++ # Don't forget version if it is 3.2v4 or newer. ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ++ ;; ++ -sco*) ++ os=-sco3.2v2 ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ++ ;; ++ -udk*) ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ++ ;; ++ -isc) ++ os=-isc2.2 ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ++ ;; ++ -clix*) ++ basic_machine=clipper-intergraph ++ ;; ++ -isc*) ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ++ ;; ++ -lynx*) ++ os=-lynxos ++ ;; ++ -ptx*) ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ++ ;; ++ -windowsnt*) ++ os=`echo $os | sed -e 's/windowsnt/winnt/'` ++ ;; ++ -psos*) ++ os=-psos ++ ;; ++ -mint | -mint[0-9]*) ++ basic_machine=m68k-atari ++ os=-mint ++ ;; ++esac ++ ++# Decode aliases for certain CPU-COMPANY combinations. ++case $basic_machine in ++ # Recognize the basic CPU types without company name. ++ # Some are omitted here because they have special meanings below. ++ 1750a | 580 \ ++ | a29k \ ++ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ ++ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ ++ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ ++ | c4x | clipper \ ++ | d10v | d30v | dlx | dsp16xx \ ++ | fr30 | frv \ ++ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ ++ | i370 | i860 | i960 | ia64 \ ++ | ip2k \ ++ | m32r | m68000 | m68k | m88k | mcore \ ++ | mips | mipsbe | mipseb | mipsel | mipsle \ ++ | mips16 \ ++ | mips64 | mips64el \ ++ | mips64vr | mips64vrel \ ++ | mips64orion | mips64orionel \ ++ | mips64vr4100 | mips64vr4100el \ ++ | mips64vr4300 | mips64vr4300el \ ++ | mips64vr5000 | mips64vr5000el \ ++ | mipsisa32 | mipsisa32el \ ++ | mipsisa32r2 | mipsisa32r2el \ ++ | mipsisa64 | mipsisa64el \ ++ | mipsisa64sb1 | mipsisa64sb1el \ ++ | mipsisa64sr71k | mipsisa64sr71kel \ ++ | mipstx39 | mipstx39el \ ++ | mn10200 | mn10300 \ ++ | msp430 \ ++ | ns16k | ns32k \ ++ | openrisc | or32 \ ++ | pdp10 | pdp11 | pj | pjl \ ++ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ ++ | pyramid \ ++ | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ ++ | sh64 | sh64le \ ++ | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ ++ | strongarm \ ++ | tahoe | thumb | tic4x | tic80 | tron \ ++ | v850 | v850e \ ++ | we32k \ ++ | x86 | xscale | xstormy16 | xtensa \ ++ | z8k) ++ basic_machine=$basic_machine-unknown ++ ;; ++ m6811 | m68hc11 | m6812 | m68hc12) ++ # Motorola 68HC11/12. ++ basic_machine=$basic_machine-unknown ++ os=-none ++ ;; ++ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ++ ;; ++ ++ # We use `pc' rather than `unknown' ++ # because (1) that's what they normally are, and ++ # (2) the word "unknown" tends to confuse beginning users. ++ i*86 | x86_64) ++ basic_machine=$basic_machine-pc ++ ;; ++ # Object if more than one company name word. ++ *-*-*) ++ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 ++ exit 1 ++ ;; ++ # Recognize the basic CPU types with company name. ++ 580-* \ ++ | a29k-* \ ++ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ ++ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ ++ | alphapca5[67]-* | alpha64pca5[67]-* | amd64-* | arc-* \ ++ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ ++ | avr-* \ ++ | bs2000-* \ ++ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ ++ | clipper-* | cydra-* \ ++ | d10v-* | d30v-* | dlx-* \ ++ | elxsi-* \ ++ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ ++ | h8300-* | h8500-* \ ++ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ ++ | i*86-* | i860-* | i960-* | ia64-* \ ++ | ip2k-* \ ++ | m32r-* \ ++ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ ++ | m88110-* | m88k-* | mcore-* \ ++ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ ++ | mips16-* \ ++ | mips64-* | mips64el-* \ ++ | mips64vr-* | mips64vrel-* \ ++ | mips64orion-* | mips64orionel-* \ ++ | mips64vr4100-* | mips64vr4100el-* \ ++ | mips64vr4300-* | mips64vr4300el-* \ ++ | mips64vr5000-* | mips64vr5000el-* \ ++ | mipsisa32-* | mipsisa32el-* \ ++ | mipsisa32r2-* | mipsisa32r2el-* \ ++ | mipsisa64-* | mipsisa64el-* \ ++ | mipsisa64sb1-* | mipsisa64sb1el-* \ ++ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ ++ | mipstx39-* | mipstx39el-* \ ++ | msp430-* \ ++ | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ ++ | orion-* \ ++ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ ++ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ ++ | pyramid-* \ ++ | romp-* | rs6000-* \ ++ | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ ++ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ ++ | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ ++ | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ ++ | tahoe-* | thumb-* \ ++ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ ++ | tron-* \ ++ | v850-* | v850e-* | vax-* \ ++ | we32k-* \ ++ | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ ++ | xtensa-* \ ++ | ymp-* \ ++ | z8k-*) ++ ;; ++ # Recognize the various machine names and aliases which stand ++ # for a CPU type and a company and sometimes even an OS. ++ 386bsd) ++ basic_machine=i386-unknown ++ os=-bsd ++ ;; ++ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) ++ basic_machine=m68000-att ++ ;; ++ 3b*) ++ basic_machine=we32k-att ++ ;; ++ a29khif) ++ basic_machine=a29k-amd ++ os=-udi ++ ;; ++ adobe68k) ++ basic_machine=m68010-adobe ++ os=-scout ++ ;; ++ alliant | fx80) ++ basic_machine=fx80-alliant ++ ;; ++ altos | altos3068) ++ basic_machine=m68k-altos ++ ;; ++ am29k) ++ basic_machine=a29k-none ++ os=-bsd ++ ;; ++ amd64) ++ basic_machine=x86_64-pc ++ ;; ++ amdahl) ++ basic_machine=580-amdahl ++ os=-sysv ++ ;; ++ amiga | amiga-*) ++ basic_machine=m68k-unknown ++ ;; ++ amigaos | amigados) ++ basic_machine=m68k-unknown ++ os=-amigaos ++ ;; ++ amigaunix | amix) ++ basic_machine=m68k-unknown ++ os=-sysv4 ++ ;; ++ apollo68) ++ basic_machine=m68k-apollo ++ os=-sysv ++ ;; ++ apollo68bsd) ++ basic_machine=m68k-apollo ++ os=-bsd ++ ;; ++ aux) ++ basic_machine=m68k-apple ++ os=-aux ++ ;; ++ balance) ++ basic_machine=ns32k-sequent ++ os=-dynix ++ ;; ++ c90) ++ basic_machine=c90-cray ++ os=-unicos ++ ;; ++ convex-c1) ++ basic_machine=c1-convex ++ os=-bsd ++ ;; ++ convex-c2) ++ basic_machine=c2-convex ++ os=-bsd ++ ;; ++ convex-c32) ++ basic_machine=c32-convex ++ os=-bsd ++ ;; ++ convex-c34) ++ basic_machine=c34-convex ++ os=-bsd ++ ;; ++ convex-c38) ++ basic_machine=c38-convex ++ os=-bsd ++ ;; ++ cray | j90) ++ basic_machine=j90-cray ++ os=-unicos ++ ;; ++ crds | unos) ++ basic_machine=m68k-crds ++ ;; ++ cris | cris-* | etrax*) ++ basic_machine=cris-axis ++ ;; ++ da30 | da30-*) ++ basic_machine=m68k-da30 ++ ;; ++ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) ++ basic_machine=mips-dec ++ ;; ++ decsystem10* | dec10*) ++ basic_machine=pdp10-dec ++ os=-tops10 ++ ;; ++ decsystem20* | dec20*) ++ basic_machine=pdp10-dec ++ os=-tops20 ++ ;; ++ delta | 3300 | motorola-3300 | motorola-delta \ ++ | 3300-motorola | delta-motorola) ++ basic_machine=m68k-motorola ++ ;; ++ delta88) ++ basic_machine=m88k-motorola ++ os=-sysv3 ++ ;; ++ dpx20 | dpx20-*) ++ basic_machine=rs6000-bull ++ os=-bosx ++ ;; ++ dpx2* | dpx2*-bull) ++ basic_machine=m68k-bull ++ os=-sysv3 ++ ;; ++ ebmon29k) ++ basic_machine=a29k-amd ++ os=-ebmon ++ ;; ++ elxsi) ++ basic_machine=elxsi-elxsi ++ os=-bsd ++ ;; ++ encore | umax | mmax) ++ basic_machine=ns32k-encore ++ ;; ++ es1800 | OSE68k | ose68k | ose | OSE) ++ basic_machine=m68k-ericsson ++ os=-ose ++ ;; ++ fx2800) ++ basic_machine=i860-alliant ++ ;; ++ genix) ++ basic_machine=ns32k-ns ++ ;; ++ gmicro) ++ basic_machine=tron-gmicro ++ os=-sysv ++ ;; ++ go32) ++ basic_machine=i386-pc ++ os=-go32 ++ ;; ++ h3050r* | hiux*) ++ basic_machine=hppa1.1-hitachi ++ os=-hiuxwe2 ++ ;; ++ h8300hms) ++ basic_machine=h8300-hitachi ++ os=-hms ++ ;; ++ h8300xray) ++ basic_machine=h8300-hitachi ++ os=-xray ++ ;; ++ h8500hms) ++ basic_machine=h8500-hitachi ++ os=-hms ++ ;; ++ harris) ++ basic_machine=m88k-harris ++ os=-sysv3 ++ ;; ++ hp300-*) ++ basic_machine=m68k-hp ++ ;; ++ hp300bsd) ++ basic_machine=m68k-hp ++ os=-bsd ++ ;; ++ hp300hpux) ++ basic_machine=m68k-hp ++ os=-hpux ++ ;; ++ hp3k9[0-9][0-9] | hp9[0-9][0-9]) ++ basic_machine=hppa1.0-hp ++ ;; ++ hp9k2[0-9][0-9] | hp9k31[0-9]) ++ basic_machine=m68000-hp ++ ;; ++ hp9k3[2-9][0-9]) ++ basic_machine=m68k-hp ++ ;; ++ hp9k6[0-9][0-9] | hp6[0-9][0-9]) ++ basic_machine=hppa1.0-hp ++ ;; ++ hp9k7[0-79][0-9] | hp7[0-79][0-9]) ++ basic_machine=hppa1.1-hp ++ ;; ++ hp9k78[0-9] | hp78[0-9]) ++ # FIXME: really hppa2.0-hp ++ basic_machine=hppa1.1-hp ++ ;; ++ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) ++ # FIXME: really hppa2.0-hp ++ basic_machine=hppa1.1-hp ++ ;; ++ hp9k8[0-9][13679] | hp8[0-9][13679]) ++ basic_machine=hppa1.1-hp ++ ;; ++ hp9k8[0-9][0-9] | hp8[0-9][0-9]) ++ basic_machine=hppa1.0-hp ++ ;; ++ hppa-next) ++ os=-nextstep3 ++ ;; ++ hppaosf) ++ basic_machine=hppa1.1-hp ++ os=-osf ++ ;; ++ hppro) ++ basic_machine=hppa1.1-hp ++ os=-proelf ++ ;; ++ i370-ibm* | ibm*) ++ basic_machine=i370-ibm ++ ;; ++# I'm not sure what "Sysv32" means. Should this be sysv3.2? ++ i*86v32) ++ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` ++ os=-sysv32 ++ ;; ++ i*86v4*) ++ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` ++ os=-sysv4 ++ ;; ++ i*86v) ++ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` ++ os=-sysv ++ ;; ++ i*86sol2) ++ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` ++ os=-solaris2 ++ ;; ++ i386mach) ++ basic_machine=i386-mach ++ os=-mach ++ ;; ++ i386-vsta | vsta) ++ basic_machine=i386-unknown ++ os=-vsta ++ ;; ++ iris | iris4d) ++ basic_machine=mips-sgi ++ case $os in ++ -irix*) ++ ;; ++ *) ++ os=-irix4 ++ ;; ++ esac ++ ;; ++ isi68 | isi) ++ basic_machine=m68k-isi ++ os=-sysv ++ ;; ++ m88k-omron*) ++ basic_machine=m88k-omron ++ ;; ++ magnum | m3230) ++ basic_machine=mips-mips ++ os=-sysv ++ ;; ++ merlin) ++ basic_machine=ns32k-utek ++ os=-sysv ++ ;; ++ mingw32) ++ basic_machine=i386-pc ++ os=-mingw32 ++ ;; ++ miniframe) ++ basic_machine=m68000-convergent ++ ;; ++ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) ++ basic_machine=m68k-atari ++ os=-mint ++ ;; ++ mips3*-*) ++ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ++ ;; ++ mips3*) ++ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ++ ;; ++ mmix*) ++ basic_machine=mmix-knuth ++ os=-mmixware ++ ;; ++ monitor) ++ basic_machine=m68k-rom68k ++ os=-coff ++ ;; ++ morphos) ++ basic_machine=powerpc-unknown ++ os=-morphos ++ ;; ++ msdos) ++ basic_machine=i386-pc ++ os=-msdos ++ ;; ++ mvs) ++ basic_machine=i370-ibm ++ os=-mvs ++ ;; ++ ncr3000) ++ basic_machine=i486-ncr ++ os=-sysv4 ++ ;; ++ netbsd386) ++ basic_machine=i386-unknown ++ os=-netbsd ++ ;; ++ netwinder) ++ basic_machine=armv4l-rebel ++ os=-linux ++ ;; ++ news | news700 | news800 | news900) ++ basic_machine=m68k-sony ++ os=-newsos ++ ;; ++ news1000) ++ basic_machine=m68030-sony ++ os=-newsos ++ ;; ++ news-3600 | risc-news) ++ basic_machine=mips-sony ++ os=-newsos ++ ;; ++ necv70) ++ basic_machine=v70-nec ++ os=-sysv ++ ;; ++ next | m*-next ) ++ basic_machine=m68k-next ++ case $os in ++ -nextstep* ) ++ ;; ++ -ns2*) ++ os=-nextstep2 ++ ;; ++ *) ++ os=-nextstep3 ++ ;; ++ esac ++ ;; ++ nh3000) ++ basic_machine=m68k-harris ++ os=-cxux ++ ;; ++ nh[45]000) ++ basic_machine=m88k-harris ++ os=-cxux ++ ;; ++ nindy960) ++ basic_machine=i960-intel ++ os=-nindy ++ ;; ++ mon960) ++ basic_machine=i960-intel ++ os=-mon960 ++ ;; ++ nonstopux) ++ basic_machine=mips-compaq ++ os=-nonstopux ++ ;; ++ np1) ++ basic_machine=np1-gould ++ ;; ++ nv1) ++ basic_machine=nv1-cray ++ os=-unicosmp ++ ;; ++ nsr-tandem) ++ basic_machine=nsr-tandem ++ ;; ++ op50n-* | op60c-*) ++ basic_machine=hppa1.1-oki ++ os=-proelf ++ ;; ++ or32 | or32-*) ++ basic_machine=or32-unknown ++ os=-coff ++ ;; ++ OSE68000 | ose68000) ++ basic_machine=m68000-ericsson ++ os=-ose ++ ;; ++ os68k) ++ basic_machine=m68k-none ++ os=-os68k ++ ;; ++ pa-hitachi) ++ basic_machine=hppa1.1-hitachi ++ os=-hiuxwe2 ++ ;; ++ paragon) ++ basic_machine=i860-intel ++ os=-osf ++ ;; ++ pbd) ++ basic_machine=sparc-tti ++ ;; ++ pbb) ++ basic_machine=m68k-tti ++ ;; ++ pc532 | pc532-*) ++ basic_machine=ns32k-pc532 ++ ;; ++ pentium | p5 | k5 | k6 | nexgen | viac3) ++ basic_machine=i586-pc ++ ;; ++ pentiumpro | p6 | 6x86 | athlon | athlon_*) ++ basic_machine=i686-pc ++ ;; ++ pentiumii | pentium2 | pentiumiii | pentium3) ++ basic_machine=i686-pc ++ ;; ++ pentium4) ++ basic_machine=i786-pc ++ ;; ++ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) ++ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; ++ pentiumpro-* | p6-* | 6x86-* | athlon-*) ++ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; ++ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) ++ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; ++ pentium4-*) ++ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; ++ pn) ++ basic_machine=pn-gould ++ ;; ++ power) basic_machine=power-ibm ++ ;; ++ ppc) basic_machine=powerpc-unknown ++ ;; ++ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; ++ ppcle | powerpclittle | ppc-le | powerpc-little) ++ basic_machine=powerpcle-unknown ++ ;; ++ ppcle-* | powerpclittle-*) ++ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; ++ ppc64) basic_machine=powerpc64-unknown ++ ;; ++ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; ++ ppc64le | powerpc64little | ppc64-le | powerpc64-little) ++ basic_machine=powerpc64le-unknown ++ ;; ++ ppc64le-* | powerpc64little-*) ++ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; ++ ps2) ++ basic_machine=i386-ibm ++ ;; ++ pw32) ++ basic_machine=i586-unknown ++ os=-pw32 ++ ;; ++ rom68k) ++ basic_machine=m68k-rom68k ++ os=-coff ++ ;; ++ rm[46]00) ++ basic_machine=mips-siemens ++ ;; ++ rtpc | rtpc-*) ++ basic_machine=romp-ibm ++ ;; ++ s390 | s390-*) ++ basic_machine=s390-ibm ++ ;; ++ s390x | s390x-*) ++ basic_machine=s390x-ibm ++ ;; ++ sa29200) ++ basic_machine=a29k-amd ++ os=-udi ++ ;; ++ sb1) ++ basic_machine=mipsisa64sb1-unknown ++ ;; ++ sb1el) ++ basic_machine=mipsisa64sb1el-unknown ++ ;; ++ sei) ++ basic_machine=mips-sei ++ os=-seiux ++ ;; ++ sequent) ++ basic_machine=i386-sequent ++ ;; ++ sh) ++ basic_machine=sh-hitachi ++ os=-hms ++ ;; ++ sh64) ++ basic_machine=sh64-unknown ++ ;; ++ sparclite-wrs | simso-wrs) ++ basic_machine=sparclite-wrs ++ os=-vxworks ++ ;; ++ sps7) ++ basic_machine=m68k-bull ++ os=-sysv2 ++ ;; ++ spur) ++ basic_machine=spur-unknown ++ ;; ++ st2000) ++ basic_machine=m68k-tandem ++ ;; ++ stratus) ++ basic_machine=i860-stratus ++ os=-sysv4 ++ ;; ++ sun2) ++ basic_machine=m68000-sun ++ ;; ++ sun2os3) ++ basic_machine=m68000-sun ++ os=-sunos3 ++ ;; ++ sun2os4) ++ basic_machine=m68000-sun ++ os=-sunos4 ++ ;; ++ sun3os3) ++ basic_machine=m68k-sun ++ os=-sunos3 ++ ;; ++ sun3os4) ++ basic_machine=m68k-sun ++ os=-sunos4 ++ ;; ++ sun4os3) ++ basic_machine=sparc-sun ++ os=-sunos3 ++ ;; ++ sun4os4) ++ basic_machine=sparc-sun ++ os=-sunos4 ++ ;; ++ sun4sol2) ++ basic_machine=sparc-sun ++ os=-solaris2 ++ ;; ++ sun3 | sun3-*) ++ basic_machine=m68k-sun ++ ;; ++ sun4) ++ basic_machine=sparc-sun ++ ;; ++ sun386 | sun386i | roadrunner) ++ basic_machine=i386-sun ++ ;; ++ sv1) ++ basic_machine=sv1-cray ++ os=-unicos ++ ;; ++ symmetry) ++ basic_machine=i386-sequent ++ os=-dynix ++ ;; ++ t3e) ++ basic_machine=alphaev5-cray ++ os=-unicos ++ ;; ++ t90) ++ basic_machine=t90-cray ++ os=-unicos ++ ;; ++ tic54x | c54x*) ++ basic_machine=tic54x-unknown ++ os=-coff ++ ;; ++ tic55x | c55x*) ++ basic_machine=tic55x-unknown ++ os=-coff ++ ;; ++ tic6x | c6x*) ++ basic_machine=tic6x-unknown ++ os=-coff ++ ;; ++ tx39) ++ basic_machine=mipstx39-unknown ++ ;; ++ tx39el) ++ basic_machine=mipstx39el-unknown ++ ;; ++ toad1) ++ basic_machine=pdp10-xkl ++ os=-tops20 ++ ;; ++ tower | tower-32) ++ basic_machine=m68k-ncr ++ ;; ++ udi29k) ++ basic_machine=a29k-amd ++ os=-udi ++ ;; ++ ultra3) ++ basic_machine=a29k-nyu ++ os=-sym1 ++ ;; ++ v810 | necv810) ++ basic_machine=v810-nec ++ os=-none ++ ;; ++ vaxv) ++ basic_machine=vax-dec ++ os=-sysv ++ ;; ++ vms) ++ basic_machine=vax-dec ++ os=-vms ++ ;; ++ vpp*|vx|vx-*) ++ basic_machine=f301-fujitsu ++ ;; ++ vxworks960) ++ basic_machine=i960-wrs ++ os=-vxworks ++ ;; ++ vxworks68) ++ basic_machine=m68k-wrs ++ os=-vxworks ++ ;; ++ vxworks29k) ++ basic_machine=a29k-wrs ++ os=-vxworks ++ ;; ++ w65*) ++ basic_machine=w65-wdc ++ os=-none ++ ;; ++ w89k-*) ++ basic_machine=hppa1.1-winbond ++ os=-proelf ++ ;; ++ xps | xps100) ++ basic_machine=xps100-honeywell ++ ;; ++ ymp) ++ basic_machine=ymp-cray ++ os=-unicos ++ ;; ++ z8k-*-coff) ++ basic_machine=z8k-unknown ++ os=-sim ++ ;; ++ none) ++ basic_machine=none-none ++ os=-none ++ ;; ++ ++# Here we handle the default manufacturer of certain CPU types. It is in ++# some cases the only manufacturer, in others, it is the most popular. ++ w89k) ++ basic_machine=hppa1.1-winbond ++ ;; ++ op50n) ++ basic_machine=hppa1.1-oki ++ ;; ++ op60c) ++ basic_machine=hppa1.1-oki ++ ;; ++ romp) ++ basic_machine=romp-ibm ++ ;; ++ rs6000) ++ basic_machine=rs6000-ibm ++ ;; ++ vax) ++ basic_machine=vax-dec ++ ;; ++ pdp10) ++ # there are many clones, so DEC is not a safe bet ++ basic_machine=pdp10-unknown ++ ;; ++ pdp11) ++ basic_machine=pdp11-dec ++ ;; ++ we32k) ++ basic_machine=we32k-att ++ ;; ++ sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) ++ basic_machine=sh-unknown ++ ;; ++ sh64) ++ basic_machine=sh64-unknown ++ ;; ++ sparc | sparcv9 | sparcv9b) ++ basic_machine=sparc-sun ++ ;; ++ cydra) ++ basic_machine=cydra-cydrome ++ ;; ++ orion) ++ basic_machine=orion-highlevel ++ ;; ++ orion105) ++ basic_machine=clipper-highlevel ++ ;; ++ mac | mpw | mac-mpw) ++ basic_machine=m68k-apple ++ ;; ++ pmac | pmac-mpw) ++ basic_machine=powerpc-apple ++ ;; ++ *-unknown) ++ # Make sure to match an already-canonicalized machine name. ++ ;; ++ *) ++ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 ++ exit 1 ++ ;; ++esac ++ ++# Here we canonicalize certain aliases for manufacturers. ++case $basic_machine in ++ *-digital*) ++ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ++ ;; ++ *-commodore*) ++ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ++ ;; ++ *) ++ ;; ++esac ++ ++# Decode manufacturer-specific aliases for certain operating systems. ++ ++if [ x"$os" != x"" ] ++then ++case $os in ++ # First match some system type aliases ++ # that might get confused with valid system types. ++ # -solaris* is a basic system type, with this one exception. ++ -solaris1 | -solaris1.*) ++ os=`echo $os | sed -e 's|solaris1|sunos4|'` ++ ;; ++ -solaris) ++ os=-solaris2 ++ ;; ++ -svr4*) ++ os=-sysv4 ++ ;; ++ -unixware*) ++ os=-sysv4.2uw ++ ;; ++ -gnu/linux*) ++ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ++ ;; ++ # First accept the basic system types. ++ # The portable systems comes first. ++ # Each alternative MUST END IN A *, to match a version number. ++ # -sysv* is not here because it comes later, after sysvr4. ++ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ ++ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ ++ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ ++ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ ++ | -aos* \ ++ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ ++ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ ++ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \ ++ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ ++ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ ++ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ ++ | -chorusos* | -chorusrdb* \ ++ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ ++ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ ++ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ ++ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ ++ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ ++ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ ++ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ ++ | -powermax* | -dnix* | -nx6 | -nx7 | -sei*) ++ # Remember, each alternative MUST END IN *, to match a version number. ++ ;; ++ -qnx*) ++ case $basic_machine in ++ x86-* | i*86-*) ++ ;; ++ *) ++ os=-nto$os ++ ;; ++ esac ++ ;; ++ -nto-qnx*) ++ ;; ++ -nto*) ++ os=`echo $os | sed -e 's|nto|nto-qnx|'` ++ ;; ++ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ ++ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ ++ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ++ ;; ++ -mac*) ++ os=`echo $os | sed -e 's|mac|macos|'` ++ ;; ++ -linux*) ++ os=`echo $os | sed -e 's|linux|linux-gnu|'` ++ ;; ++ -sunos5*) ++ os=`echo $os | sed -e 's|sunos5|solaris2|'` ++ ;; ++ -sunos6*) ++ os=`echo $os | sed -e 's|sunos6|solaris3|'` ++ ;; ++ -opened*) ++ os=-openedition ++ ;; ++ -wince*) ++ os=-wince ++ ;; ++ -osfrose*) ++ os=-osfrose ++ ;; ++ -osf*) ++ os=-osf ++ ;; ++ -utek*) ++ os=-bsd ++ ;; ++ -dynix*) ++ os=-bsd ++ ;; ++ -acis*) ++ os=-aos ++ ;; ++ -atheos*) ++ os=-atheos ++ ;; ++ -386bsd) ++ os=-bsd ++ ;; ++ -ctix* | -uts*) ++ os=-sysv ++ ;; ++ -nova*) ++ os=-rtmk-nova ++ ;; ++ -ns2 ) ++ os=-nextstep2 ++ ;; ++ -nsk*) ++ os=-nsk ++ ;; ++ # Preserve the version number of sinix5. ++ -sinix5.*) ++ os=`echo $os | sed -e 's|sinix|sysv|'` ++ ;; ++ -sinix*) ++ os=-sysv4 ++ ;; ++ -triton*) ++ os=-sysv3 ++ ;; ++ -oss*) ++ os=-sysv3 ++ ;; ++ -svr4) ++ os=-sysv4 ++ ;; ++ -svr3) ++ os=-sysv3 ++ ;; ++ -sysvr4) ++ os=-sysv4 ++ ;; ++ # This must come after -sysvr4. ++ -sysv*) ++ ;; ++ -ose*) ++ os=-ose ++ ;; ++ -es1800*) ++ os=-ose ++ ;; ++ -xenix) ++ os=-xenix ++ ;; ++ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) ++ os=-mint ++ ;; ++ -aros*) ++ os=-aros ++ ;; ++ -kaos*) ++ os=-kaos ++ ;; ++ -none) ++ ;; ++ *) ++ # Get rid of the `-' at the beginning of $os. ++ os=`echo $os | sed 's/[^-]*-//'` ++ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 ++ exit 1 ++ ;; ++esac ++else ++ ++# Here we handle the default operating systems that come with various machines. ++# The value should be what the vendor currently ships out the door with their ++# machine or put another way, the most popular os provided with the machine. ++ ++# Note that if you're going to try to match "-MANUFACTURER" here (say, ++# "-sun"), then you have to tell the case statement up towards the top ++# that MANUFACTURER isn't an operating system. Otherwise, code above ++# will signal an error saying that MANUFACTURER isn't an operating ++# system, and we'll never get to this point. ++ ++case $basic_machine in ++ *-acorn) ++ os=-riscix1.2 ++ ;; ++ arm*-rebel) ++ os=-linux ++ ;; ++ arm*-semi) ++ os=-aout ++ ;; ++ c4x-* | tic4x-*) ++ os=-coff ++ ;; ++ # This must come before the *-dec entry. ++ pdp10-*) ++ os=-tops20 ++ ;; ++ pdp11-*) ++ os=-none ++ ;; ++ *-dec | vax-*) ++ os=-ultrix4.2 ++ ;; ++ m68*-apollo) ++ os=-domain ++ ;; ++ i386-sun) ++ os=-sunos4.0.2 ++ ;; ++ m68000-sun) ++ os=-sunos3 ++ # This also exists in the configure program, but was not the ++ # default. ++ # os=-sunos4 ++ ;; ++ m68*-cisco) ++ os=-aout ++ ;; ++ mips*-cisco) ++ os=-elf ++ ;; ++ mips*-*) ++ os=-elf ++ ;; ++ or32-*) ++ os=-coff ++ ;; ++ *-tti) # must be before sparc entry or we get the wrong os. ++ os=-sysv3 ++ ;; ++ sparc-* | *-sun) ++ os=-sunos4.1.1 ++ ;; ++ *-be) ++ os=-beos ++ ;; ++ *-ibm) ++ os=-aix ++ ;; ++ *-wec) ++ os=-proelf ++ ;; ++ *-winbond) ++ os=-proelf ++ ;; ++ *-oki) ++ os=-proelf ++ ;; ++ *-hp) ++ os=-hpux ++ ;; ++ *-hitachi) ++ os=-hiux ++ ;; ++ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) ++ os=-sysv ++ ;; ++ *-cbm) ++ os=-amigaos ++ ;; ++ *-dg) ++ os=-dgux ++ ;; ++ *-dolphin) ++ os=-sysv3 ++ ;; ++ m68k-ccur) ++ os=-rtu ++ ;; ++ m88k-omron*) ++ os=-luna ++ ;; ++ *-next ) ++ os=-nextstep ++ ;; ++ *-sequent) ++ os=-ptx ++ ;; ++ *-crds) ++ os=-unos ++ ;; ++ *-ns) ++ os=-genix ++ ;; ++ i370-*) ++ os=-mvs ++ ;; ++ *-next) ++ os=-nextstep3 ++ ;; ++ *-gould) ++ os=-sysv ++ ;; ++ *-highlevel) ++ os=-bsd ++ ;; ++ *-encore) ++ os=-bsd ++ ;; ++ *-sgi) ++ os=-irix ++ ;; ++ *-siemens) ++ os=-sysv4 ++ ;; ++ *-masscomp) ++ os=-rtu ++ ;; ++ f30[01]-fujitsu | f700-fujitsu) ++ os=-uxpv ++ ;; ++ *-rom68k) ++ os=-coff ++ ;; ++ *-*bug) ++ os=-coff ++ ;; ++ *-apple) ++ os=-macos ++ ;; ++ *-atari*) ++ os=-mint ++ ;; ++ *) ++ os=-none ++ ;; ++esac ++fi ++ ++# Here we handle the case where we know the os, and the CPU type, but not the ++# manufacturer. We pick the logical manufacturer. ++vendor=unknown ++case $basic_machine in ++ *-unknown) ++ case $os in ++ -riscix*) ++ vendor=acorn ++ ;; ++ -sunos*) ++ vendor=sun ++ ;; ++ -aix*) ++ vendor=ibm ++ ;; ++ -beos*) ++ vendor=be ++ ;; ++ -hpux*) ++ vendor=hp ++ ;; ++ -mpeix*) ++ vendor=hp ++ ;; ++ -hiux*) ++ vendor=hitachi ++ ;; ++ -unos*) ++ vendor=crds ++ ;; ++ -dgux*) ++ vendor=dg ++ ;; ++ -luna*) ++ vendor=omron ++ ;; ++ -genix*) ++ vendor=ns ++ ;; ++ -mvs* | -opened*) ++ vendor=ibm ++ ;; ++ -ptx*) ++ vendor=sequent ++ ;; ++ -vxsim* | -vxworks* | -windiss*) ++ vendor=wrs ++ ;; ++ -aux*) ++ vendor=apple ++ ;; ++ -hms*) ++ vendor=hitachi ++ ;; ++ -mpw* | -macos*) ++ vendor=apple ++ ;; ++ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) ++ vendor=atari ++ ;; ++ -vos*) ++ vendor=stratus ++ ;; ++ esac ++ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ++ ;; ++esac ++ ++echo $basic_machine$os ++exit 0 ++ ++# Local variables: ++# eval: (add-hook 'write-file-hooks 'time-stamp) ++# time-stamp-start: "timestamp='" ++# time-stamp-format: "%:y-%02m-%02d" ++# time-stamp-end: "'" ++# End: +diff -urN /var/empty/depcomp config/depcomp +--- /var/empty/depcomp Thu Jan 1 01:00:00 1970 ++++ config/depcomp Wed Nov 15 05:12:11 2006 +@@ -0,0 +1,530 @@ ++#! /bin/sh ++# depcomp - compile a program generating dependencies as side-effects ++ ++scriptversion=2005-07-09.11 ++ ++# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. ++ ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2, or (at your option) ++# any later version. ++ ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++ ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA ++# 02110-1301, USA. ++ ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. ++ ++# Originally written by Alexandre Oliva . ++ ++case $1 in ++ '') ++ echo "$0: No command. Try \`$0 --help' for more information." 1>&2 ++ exit 1; ++ ;; ++ -h | --h*) ++ cat <<\EOF ++Usage: depcomp [--help] [--version] PROGRAM [ARGS] ++ ++Run PROGRAMS ARGS to compile a file, generating dependencies ++as side-effects. ++ ++Environment variables: ++ depmode Dependency tracking mode. ++ source Source file read by `PROGRAMS ARGS'. ++ object Object file output by `PROGRAMS ARGS'. ++ DEPDIR directory where to store dependencies. ++ depfile Dependency file to output. ++ tmpdepfile Temporary file to use when outputing dependencies. ++ libtool Whether libtool is used (yes/no). ++ ++Report bugs to . ++EOF ++ exit $? ++ ;; ++ -v | --v*) ++ echo "depcomp $scriptversion" ++ exit $? ++ ;; ++esac ++ ++if test -z "$depmode" || test -z "$source" || test -z "$object"; then ++ echo "depcomp: Variables source, object and depmode must be set" 1>&2 ++ exit 1 ++fi ++ ++# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. ++depfile=${depfile-`echo "$object" | ++ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} ++tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} ++ ++rm -f "$tmpdepfile" ++ ++# Some modes work just like other modes, but use different flags. We ++# parameterize here, but still list the modes in the big case below, ++# to make depend.m4 easier to write. Note that we *cannot* use a case ++# here, because this file can only contain one case statement. ++if test "$depmode" = hp; then ++ # HP compiler uses -M and no extra arg. ++ gccflag=-M ++ depmode=gcc ++fi ++ ++if test "$depmode" = dashXmstdout; then ++ # This is just like dashmstdout with a different argument. ++ dashmflag=-xM ++ depmode=dashmstdout ++fi ++ ++case "$depmode" in ++gcc3) ++## gcc 3 implements dependency tracking that does exactly what ++## we want. Yay! Note: for some reason libtool 1.4 doesn't like ++## it if -MD -MP comes after the -MF stuff. Hmm. ++ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ mv "$tmpdepfile" "$depfile" ++ ;; ++ ++gcc) ++## There are various ways to get dependency output from gcc. Here's ++## why we pick this rather obscure method: ++## - Don't want to use -MD because we'd like the dependencies to end ++## up in a subdir. Having to rename by hand is ugly. ++## (We might end up doing this anyway to support other compilers.) ++## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ++## -MM, not -M (despite what the docs say). ++## - Using -M directly means running the compiler twice (even worse ++## than renaming). ++ if test -z "$gccflag"; then ++ gccflag=-MD, ++ fi ++ "$@" -Wp,"$gccflag$tmpdepfile" ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ echo "$object : \\" > "$depfile" ++ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ++## The second -e expression handles DOS-style file names with drive letters. ++ sed -e 's/^[^:]*: / /' \ ++ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ++## This next piece of magic avoids the `deleted header file' problem. ++## The problem is that when a header file which appears in a .P file ++## is deleted, the dependency causes make to die (because there is ++## typically no way to rebuild the header). We avoid this by adding ++## dummy dependencies for each header file. Too bad gcc doesn't do ++## this for us directly. ++ tr ' ' ' ++' < "$tmpdepfile" | ++## Some versions of gcc put a space before the `:'. On the theory ++## that the space means something, we add a space to the output as ++## well. ++## Some versions of the HPUX 10.20 sed can't process this invocation ++## correctly. Breaking it into two sed invocations is a workaround. ++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++hp) ++ # This case exists only to let depend.m4 do its work. It works by ++ # looking at the text of this script. This case will never be run, ++ # since it is checked for above. ++ exit 1 ++ ;; ++ ++sgi) ++ if test "$libtool" = yes; then ++ "$@" "-Wp,-MDupdate,$tmpdepfile" ++ else ++ "$@" -MDupdate "$tmpdepfile" ++ fi ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ ++ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files ++ echo "$object : \\" > "$depfile" ++ ++ # Clip off the initial element (the dependent). Don't try to be ++ # clever and replace this with sed code, as IRIX sed won't handle ++ # lines with more than a fixed number of characters (4096 in ++ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; ++ # the IRIX cc adds comments like `#:fec' to the end of the ++ # dependency line. ++ tr ' ' ' ++' < "$tmpdepfile" \ ++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ ++ tr ' ++' ' ' >> $depfile ++ echo >> $depfile ++ ++ # The second pass generates a dummy entry for each header file. ++ tr ' ' ' ++' < "$tmpdepfile" \ ++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ ++ >> $depfile ++ else ++ # The sourcefile does not contain any dependencies, so just ++ # store a dummy comment line, to avoid errors with the Makefile ++ # "include basename.Plo" scheme. ++ echo "#dummy" > "$depfile" ++ fi ++ rm -f "$tmpdepfile" ++ ;; ++ ++aix) ++ # The C for AIX Compiler uses -M and outputs the dependencies ++ # in a .u file. In older versions, this file always lives in the ++ # current directory. Also, the AIX compiler puts `$object:' at the ++ # start of each line; $object doesn't have directory information. ++ # Version 6 uses the directory in both cases. ++ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` ++ tmpdepfile="$stripped.u" ++ if test "$libtool" = yes; then ++ "$@" -Wc,-M ++ else ++ "$@" -M ++ fi ++ stat=$? ++ ++ if test -f "$tmpdepfile"; then : ++ else ++ stripped=`echo "$stripped" | sed 's,^.*/,,'` ++ tmpdepfile="$stripped.u" ++ fi ++ ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ ++ if test -f "$tmpdepfile"; then ++ outname="$stripped.o" ++ # Each line is of the form `foo.o: dependent.h'. ++ # Do two passes, one to just change these to ++ # `$object: dependent.h' and one to simply `dependent.h:'. ++ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" ++ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" ++ else ++ # The sourcefile does not contain any dependencies, so just ++ # store a dummy comment line, to avoid errors with the Makefile ++ # "include basename.Plo" scheme. ++ echo "#dummy" > "$depfile" ++ fi ++ rm -f "$tmpdepfile" ++ ;; ++ ++icc) ++ # Intel's C compiler understands `-MD -MF file'. However on ++ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c ++ # ICC 7.0 will fill foo.d with something like ++ # foo.o: sub/foo.c ++ # foo.o: sub/foo.h ++ # which is wrong. We want: ++ # sub/foo.o: sub/foo.c ++ # sub/foo.o: sub/foo.h ++ # sub/foo.c: ++ # sub/foo.h: ++ # ICC 7.1 will output ++ # foo.o: sub/foo.c sub/foo.h ++ # and will wrap long lines using \ : ++ # foo.o: sub/foo.c ... \ ++ # sub/foo.h ... \ ++ # ... ++ ++ "$@" -MD -MF "$tmpdepfile" ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ # Each line is of the form `foo.o: dependent.h', ++ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. ++ # Do two passes, one to just change these to ++ # `$object: dependent.h' and one to simply `dependent.h:'. ++ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" ++ # Some versions of the HPUX 10.20 sed can't process this invocation ++ # correctly. Breaking it into two sed invocations is a workaround. ++ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | ++ sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++tru64) ++ # The Tru64 compiler uses -MD to generate dependencies as a side ++ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. ++ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put ++ # dependencies in `foo.d' instead, so we check for that too. ++ # Subdirectories are respected. ++ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` ++ test "x$dir" = "x$object" && dir= ++ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` ++ ++ if test "$libtool" = yes; then ++ # With Tru64 cc, shared objects can also be used to make a ++ # static library. This mecanism is used in libtool 1.4 series to ++ # handle both shared and static libraries in a single compilation. ++ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. ++ # ++ # With libtool 1.5 this exception was removed, and libtool now ++ # generates 2 separate objects for the 2 libraries. These two ++ # compilations output dependencies in in $dir.libs/$base.o.d and ++ # in $dir$base.o.d. We have to check for both files, because ++ # one of the two compilations can be disabled. We should prefer ++ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is ++ # automatically cleaned when .libs/ is deleted, while ignoring ++ # the former would cause a distcleancheck panic. ++ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 ++ tmpdepfile2=$dir$base.o.d # libtool 1.5 ++ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 ++ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 ++ "$@" -Wc,-MD ++ else ++ tmpdepfile1=$dir$base.o.d ++ tmpdepfile2=$dir$base.d ++ tmpdepfile3=$dir$base.d ++ tmpdepfile4=$dir$base.d ++ "$@" -MD ++ fi ++ ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" ++ exit $stat ++ fi ++ ++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" ++ do ++ test -f "$tmpdepfile" && break ++ done ++ if test -f "$tmpdepfile"; then ++ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" ++ # That's a tab and a space in the []. ++ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" ++ else ++ echo "#dummy" > "$depfile" ++ fi ++ rm -f "$tmpdepfile" ++ ;; ++ ++#nosideeffect) ++ # This comment above is used by automake to tell side-effect ++ # dependency tracking mechanisms from slower ones. ++ ++dashmstdout) ++ # Important note: in order to support this mode, a compiler *must* ++ # always write the preprocessed file to stdout, regardless of -o. ++ "$@" || exit $? ++ ++ # Remove the call to Libtool. ++ if test "$libtool" = yes; then ++ while test $1 != '--mode=compile'; do ++ shift ++ done ++ shift ++ fi ++ ++ # Remove `-o $object'. ++ IFS=" " ++ for arg ++ do ++ case $arg in ++ -o) ++ shift ++ ;; ++ $object) ++ shift ++ ;; ++ *) ++ set fnord "$@" "$arg" ++ shift # fnord ++ shift # $arg ++ ;; ++ esac ++ done ++ ++ test -z "$dashmflag" && dashmflag=-M ++ # Require at least two characters before searching for `:' ++ # in the target name. This is to cope with DOS-style filenames: ++ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. ++ "$@" $dashmflag | ++ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" ++ rm -f "$depfile" ++ cat < "$tmpdepfile" > "$depfile" ++ tr ' ' ' ++' < "$tmpdepfile" | \ ++## Some versions of the HPUX 10.20 sed can't process this invocation ++## correctly. Breaking it into two sed invocations is a workaround. ++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++dashXmstdout) ++ # This case only exists to satisfy depend.m4. It is never actually ++ # run, as this mode is specially recognized in the preamble. ++ exit 1 ++ ;; ++ ++makedepend) ++ "$@" || exit $? ++ # Remove any Libtool call ++ if test "$libtool" = yes; then ++ while test $1 != '--mode=compile'; do ++ shift ++ done ++ shift ++ fi ++ # X makedepend ++ shift ++ cleared=no ++ for arg in "$@"; do ++ case $cleared in ++ no) ++ set ""; shift ++ cleared=yes ;; ++ esac ++ case "$arg" in ++ -D*|-I*) ++ set fnord "$@" "$arg"; shift ;; ++ # Strip any option that makedepend may not understand. Remove ++ # the object too, otherwise makedepend will parse it as a source file. ++ -*|$object) ++ ;; ++ *) ++ set fnord "$@" "$arg"; shift ;; ++ esac ++ done ++ obj_suffix="`echo $object | sed 's/^.*\././'`" ++ touch "$tmpdepfile" ++ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" ++ rm -f "$depfile" ++ cat < "$tmpdepfile" > "$depfile" ++ sed '1,2d' "$tmpdepfile" | tr ' ' ' ++' | \ ++## Some versions of the HPUX 10.20 sed can't process this invocation ++## correctly. Breaking it into two sed invocations is a workaround. ++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" "$tmpdepfile".bak ++ ;; ++ ++cpp) ++ # Important note: in order to support this mode, a compiler *must* ++ # always write the preprocessed file to stdout. ++ "$@" || exit $? ++ ++ # Remove the call to Libtool. ++ if test "$libtool" = yes; then ++ while test $1 != '--mode=compile'; do ++ shift ++ done ++ shift ++ fi ++ ++ # Remove `-o $object'. ++ IFS=" " ++ for arg ++ do ++ case $arg in ++ -o) ++ shift ++ ;; ++ $object) ++ shift ++ ;; ++ *) ++ set fnord "$@" "$arg" ++ shift # fnord ++ shift # $arg ++ ;; ++ esac ++ done ++ ++ "$@" -E | ++ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ ++ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | ++ sed '$ s: \\$::' > "$tmpdepfile" ++ rm -f "$depfile" ++ echo "$object : \\" > "$depfile" ++ cat < "$tmpdepfile" >> "$depfile" ++ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++msvisualcpp) ++ # Important note: in order to support this mode, a compiler *must* ++ # always write the preprocessed file to stdout, regardless of -o, ++ # because we must use -o when running libtool. ++ "$@" || exit $? ++ IFS=" " ++ for arg ++ do ++ case "$arg" in ++ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") ++ set fnord "$@" ++ shift ++ shift ++ ;; ++ *) ++ set fnord "$@" "$arg" ++ shift ++ shift ++ ;; ++ esac ++ done ++ "$@" -E | ++ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" ++ rm -f "$depfile" ++ echo "$object : \\" > "$depfile" ++ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" ++ echo " " >> "$depfile" ++ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++none) ++ exec "$@" ++ ;; ++ ++*) ++ echo "Unknown depmode $depmode" 1>&2 ++ exit 1 ++ ;; ++esac ++ ++exit 0 ++ ++# Local Variables: ++# mode: shell-script ++# sh-indentation: 2 ++# eval: (add-hook 'write-file-hooks 'time-stamp) ++# time-stamp-start: "scriptversion=" ++# time-stamp-format: "%:y-%02m-%02d.%02H" ++# time-stamp-end: "$" ++# End: +diff -urN /var/empty/install-sh config/install-sh +--- /var/empty/install-sh Thu Jan 1 01:00:00 1970 ++++ config/install-sh Wed Nov 15 05:12:11 2006 +@@ -0,0 +1,323 @@ ++#!/bin/sh ++# install - install a program, script, or datafile ++ ++scriptversion=2005-05-14.22 ++ ++# This originates from X11R5 (mit/util/scripts/install.sh), which was ++# later released in X11R6 (xc/config/util/install.sh) with the ++# following copyright and license. ++# ++# Copyright (C) 1994 X Consortium ++# ++# Permission is hereby granted, free of charge, to any person obtaining a copy ++# of this software and associated documentation files (the "Software"), to ++# deal in the Software without restriction, including without limitation the ++# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or ++# sell copies of the Software, and to permit persons to whom the Software is ++# furnished to do so, subject to the following conditions: ++# ++# The above copyright notice and this permission notice shall be included in ++# all copies or substantial portions of the Software. ++# ++# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR ++# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, ++# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE ++# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN ++# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- ++# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. ++# ++# Except as contained in this notice, the name of the X Consortium shall not ++# be used in advertising or otherwise to promote the sale, use or other deal- ++# ings in this Software without prior written authorization from the X Consor- ++# tium. ++# ++# ++# FSF changes to this file are in the public domain. ++# ++# Calling this script install-sh is preferred over install.sh, to prevent ++# `make' implicit rules from creating a file called install from it ++# when there is no Makefile. ++# ++# This script is compatible with the BSD install script, but was written ++# from scratch. It can only install one file at a time, a restriction ++# shared with many OS's install programs. ++ ++# set DOITPROG to echo to test this script ++ ++# Don't use :- since 4.3BSD and earlier shells don't like it. ++doit="${DOITPROG-}" ++ ++# put in absolute paths if you don't have them in your path; or use env. vars. ++ ++mvprog="${MVPROG-mv}" ++cpprog="${CPPROG-cp}" ++chmodprog="${CHMODPROG-chmod}" ++chownprog="${CHOWNPROG-chown}" ++chgrpprog="${CHGRPPROG-chgrp}" ++stripprog="${STRIPPROG-strip}" ++rmprog="${RMPROG-rm}" ++mkdirprog="${MKDIRPROG-mkdir}" ++ ++chmodcmd="$chmodprog 0755" ++chowncmd= ++chgrpcmd= ++stripcmd= ++rmcmd="$rmprog -f" ++mvcmd="$mvprog" ++src= ++dst= ++dir_arg= ++dstarg= ++no_target_directory= ++ ++usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE ++ or: $0 [OPTION]... SRCFILES... DIRECTORY ++ or: $0 [OPTION]... -t DIRECTORY SRCFILES... ++ or: $0 [OPTION]... -d DIRECTORIES... ++ ++In the 1st form, copy SRCFILE to DSTFILE. ++In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. ++In the 4th, create DIRECTORIES. ++ ++Options: ++-c (ignored) ++-d create directories instead of installing files. ++-g GROUP $chgrpprog installed files to GROUP. ++-m MODE $chmodprog installed files to MODE. ++-o USER $chownprog installed files to USER. ++-s $stripprog installed files. ++-t DIRECTORY install into DIRECTORY. ++-T report an error if DSTFILE is a directory. ++--help display this help and exit. ++--version display version info and exit. ++ ++Environment variables override the default commands: ++ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG ++" ++ ++while test -n "$1"; do ++ case $1 in ++ -c) shift ++ continue;; ++ ++ -d) dir_arg=true ++ shift ++ continue;; ++ ++ -g) chgrpcmd="$chgrpprog $2" ++ shift ++ shift ++ continue;; ++ ++ --help) echo "$usage"; exit $?;; ++ ++ -m) chmodcmd="$chmodprog $2" ++ shift ++ shift ++ continue;; ++ ++ -o) chowncmd="$chownprog $2" ++ shift ++ shift ++ continue;; ++ ++ -s) stripcmd=$stripprog ++ shift ++ continue;; ++ ++ -t) dstarg=$2 ++ shift ++ shift ++ continue;; ++ ++ -T) no_target_directory=true ++ shift ++ continue;; ++ ++ --version) echo "$0 $scriptversion"; exit $?;; ++ ++ *) # When -d is used, all remaining arguments are directories to create. ++ # When -t is used, the destination is already specified. ++ test -n "$dir_arg$dstarg" && break ++ # Otherwise, the last argument is the destination. Remove it from $@. ++ for arg ++ do ++ if test -n "$dstarg"; then ++ # $@ is not empty: it contains at least $arg. ++ set fnord "$@" "$dstarg" ++ shift # fnord ++ fi ++ shift # arg ++ dstarg=$arg ++ done ++ break;; ++ esac ++done ++ ++if test -z "$1"; then ++ if test -z "$dir_arg"; then ++ echo "$0: no input file specified." >&2 ++ exit 1 ++ fi ++ # It's OK to call `install-sh -d' without argument. ++ # This can happen when creating conditional directories. ++ exit 0 ++fi ++ ++for src ++do ++ # Protect names starting with `-'. ++ case $src in ++ -*) src=./$src ;; ++ esac ++ ++ if test -n "$dir_arg"; then ++ dst=$src ++ src= ++ ++ if test -d "$dst"; then ++ mkdircmd=: ++ chmodcmd= ++ else ++ mkdircmd=$mkdirprog ++ fi ++ else ++ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command ++ # might cause directories to be created, which would be especially bad ++ # if $src (and thus $dsttmp) contains '*'. ++ if test ! -f "$src" && test ! -d "$src"; then ++ echo "$0: $src does not exist." >&2 ++ exit 1 ++ fi ++ ++ if test -z "$dstarg"; then ++ echo "$0: no destination specified." >&2 ++ exit 1 ++ fi ++ ++ dst=$dstarg ++ # Protect names starting with `-'. ++ case $dst in ++ -*) dst=./$dst ;; ++ esac ++ ++ # If destination is a directory, append the input filename; won't work ++ # if double slashes aren't ignored. ++ if test -d "$dst"; then ++ if test -n "$no_target_directory"; then ++ echo "$0: $dstarg: Is a directory" >&2 ++ exit 1 ++ fi ++ dst=$dst/`basename "$src"` ++ fi ++ fi ++ ++ # This sed command emulates the dirname command. ++ dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` ++ ++ # Make sure that the destination directory exists. ++ ++ # Skip lots of stat calls in the usual case. ++ if test ! -d "$dstdir"; then ++ defaultIFS=' ++ ' ++ IFS="${IFS-$defaultIFS}" ++ ++ oIFS=$IFS ++ # Some sh's can't handle IFS=/ for some reason. ++ IFS='%' ++ set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` ++ shift ++ IFS=$oIFS ++ ++ pathcomp= ++ ++ while test $# -ne 0 ; do ++ pathcomp=$pathcomp$1 ++ shift ++ if test ! -d "$pathcomp"; then ++ $mkdirprog "$pathcomp" ++ # mkdir can fail with a `File exist' error in case several ++ # install-sh are creating the directory concurrently. This ++ # is OK. ++ test -d "$pathcomp" || exit ++ fi ++ pathcomp=$pathcomp/ ++ done ++ fi ++ ++ if test -n "$dir_arg"; then ++ $doit $mkdircmd "$dst" \ ++ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ ++ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ ++ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ ++ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } ++ ++ else ++ dstfile=`basename "$dst"` ++ ++ # Make a couple of temp file names in the proper directory. ++ dsttmp=$dstdir/_inst.$$_ ++ rmtmp=$dstdir/_rm.$$_ ++ ++ # Trap to clean up those temp files at exit. ++ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 ++ trap '(exit $?); exit' 1 2 13 15 ++ ++ # Copy the file name to the temp name. ++ $doit $cpprog "$src" "$dsttmp" && ++ ++ # and set any options; do chmod last to preserve setuid bits. ++ # ++ # If any of these fail, we abort the whole thing. If we want to ++ # ignore errors from any of these, just make sure not to ignore ++ # errors from the above "$doit $cpprog $src $dsttmp" command. ++ # ++ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ ++ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ ++ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ ++ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && ++ ++ # Now rename the file to the real destination. ++ { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ ++ || { ++ # The rename failed, perhaps because mv can't rename something else ++ # to itself, or perhaps because mv is so ancient that it does not ++ # support -f. ++ ++ # Now remove or move aside any old file at destination location. ++ # We try this two ways since rm can't unlink itself on some ++ # systems and the destination file might be busy for other ++ # reasons. In this case, the final cleanup might fail but the new ++ # file should still install successfully. ++ { ++ if test -f "$dstdir/$dstfile"; then ++ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ ++ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ ++ || { ++ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 ++ (exit 1); exit 1 ++ } ++ else ++ : ++ fi ++ } && ++ ++ # Now rename the file to the real destination. ++ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" ++ } ++ } ++ fi || { (exit 1); exit 1; } ++done ++ ++# The final little trick to "correctly" pass the exit status to the exit trap. ++{ ++ (exit 0); exit 0 ++} ++ ++# Local variables: ++# eval: (add-hook 'write-file-hooks 'time-stamp) ++# time-stamp-start: "scriptversion=" ++# time-stamp-format: "%:y-%02m-%02d.%02H" ++# time-stamp-end: "$" ++# End: +diff -urN /var/empty/ltmain.sh config/ltmain.sh +--- /var/empty/ltmain.sh Thu Jan 1 01:00:00 1970 ++++ config/ltmain.sh Wed Nov 15 05:12:11 2006 +@@ -0,0 +1,6971 @@ ++# ltmain.sh - Provide generalized library-building support services. ++# NOTE: Changing this file will not affect anything until you rerun configure. ++# ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# Originally by Gordon Matzigkeit , 1996 ++# ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, but ++# WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++# ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. ++ ++basename="s,^.*/,,g" ++ ++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh ++# is ksh but when the shell is invoked as "sh" and the current value of ++# the _XPG environment variable is not equal to 1 (one), the special ++# positional parameter $0, within a function call, is the name of the ++# function. ++progpath="$0" ++ ++# define SED for historic ltconfig's generated by Libtool 1.3 ++test -z "$SED" && SED=sed ++ ++# The name of this program: ++progname=`echo "$progpath" | $SED $basename` ++modename="$progname" ++ ++# Global variables: ++EXIT_SUCCESS=0 ++EXIT_FAILURE=1 ++ ++PROGRAM=ltmain.sh ++PACKAGE=libtool ++VERSION=1.5.22 ++TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" ++ ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes. ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++# Same for EGREP, and just to be sure, do LTCC as well ++if test "X$EGREP" = X ; then ++ EGREP=egrep ++fi ++if test "X$LTCC" = X ; then ++ LTCC=${CC-gcc} ++fi ++ ++# Check that we have a working $echo. ++if test "X$1" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++elif test "X$1" = X--fallback-echo; then ++ # Avoid inline document here, it may be left over ++ : ++elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then ++ # Yippee, $echo works! ++ : ++else ++ # Restart under the correct shell, and then maybe $echo will work. ++ exec $SHELL "$progpath" --no-reexec ${1+"$@"} ++fi ++ ++if test "X$1" = X--fallback-echo; then ++ # used as fallback echo ++ shift ++ cat <&2 ++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 ++ exit $EXIT_FAILURE ++fi ++ ++# Global variables. ++mode=$default_mode ++nonopt= ++prev= ++prevopt= ++run= ++show="$echo" ++show_help= ++execute_dlfiles= ++duplicate_deps=no ++preserve_args= ++lo2o="s/\\.lo\$/.${objext}/" ++o2lo="s/\\.${objext}\$/.lo/" ++ ++if test -z "$max_cmd_len"; then ++ i=0 ++ testring="ABCD" ++ new_result= ++ ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while (test "X"`$SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \ ++ = "XX$testring") >/dev/null 2>&1 && ++ new_result=`expr "X$testring" : ".*" 2>&1` && ++ max_cmd_len="$new_result" && ++ test "$i" != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ testring="$testring$testring" ++ done ++ testring= ++ # Add a significant safety factor because C++ compilers can tack on massive ++ # amounts of additional arguments before passing them to the linker. ++ # It appears as though 1/2 is a usable value. ++ max_cmd_len=`expr $max_cmd_len \/ 2` ++fi ++ ++##################################### ++# Shell function definitions: ++# This seems to be the best place for them ++ ++# func_mktempdir [string] ++# Make a temporary directory that won't clash with other running ++# libtool processes, and avoids race conditions if possible. If ++# given, STRING is the basename for that directory. ++func_mktempdir () ++{ ++ my_template="${TMPDIR-/tmp}/${1-$progname}" ++ ++ if test "$run" = ":"; then ++ # Return a directory name, but don't create it in dry-run mode ++ my_tmpdir="${my_template}-$$" ++ else ++ ++ # If mktemp works, use that first and foremost ++ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` ++ ++ if test ! -d "$my_tmpdir"; then ++ # Failing that, at least try and use $RANDOM to avoid a race ++ my_tmpdir="${my_template}-${RANDOM-0}$$" ++ ++ save_mktempdir_umask=`umask` ++ umask 0077 ++ $mkdir "$my_tmpdir" ++ umask $save_mktempdir_umask ++ fi ++ ++ # If we're not in dry-run mode, bomb out on failure ++ test -d "$my_tmpdir" || { ++ $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 ++ exit $EXIT_FAILURE ++ } ++ fi ++ ++ $echo "X$my_tmpdir" | $Xsed ++} ++ ++ ++# func_win32_libid arg ++# return the library type of file 'arg' ++# ++# Need a lot of goo to handle *both* DLLs and import libs ++# Has to be a shell function in order to 'eat' the argument ++# that is supplied when $file_magic_command is called. ++func_win32_libid () ++{ ++ win32_libid_type="unknown" ++ win32_fileres=`file -L $1 2>/dev/null` ++ case $win32_fileres in ++ *ar\ archive\ import\ library*) # definitely import ++ win32_libid_type="x86 archive import" ++ ;; ++ *ar\ archive*) # could be an import, or static ++ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ ++ $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then ++ win32_nmres=`eval $NM -f posix -A $1 | \ ++ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` ++ case $win32_nmres in ++ import*) win32_libid_type="x86 archive import";; ++ *) win32_libid_type="x86 archive static";; ++ esac ++ fi ++ ;; ++ *DLL*) ++ win32_libid_type="x86 DLL" ++ ;; ++ *executable*) # but shell scripts are "executable" too... ++ case $win32_fileres in ++ *MS\ Windows\ PE\ Intel*) ++ win32_libid_type="x86 DLL" ++ ;; ++ esac ++ ;; ++ esac ++ $echo $win32_libid_type ++} ++ ++ ++# func_infer_tag arg ++# Infer tagged configuration to use if any are available and ++# if one wasn't chosen via the "--tag" command line option. ++# Only attempt this if the compiler in the base compile ++# command doesn't match the default compiler. ++# arg is usually of the form 'gcc ...' ++func_infer_tag () ++{ ++ if test -n "$available_tags" && test -z "$tagname"; then ++ CC_quoted= ++ for arg in $CC; do ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ CC_quoted="$CC_quoted $arg" ++ done ++ case $@ in ++ # Blanks in the command may have been stripped by the calling shell, ++ # but not from the CC environment variable when configure was run. ++ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; ++ # Blanks at the start of $base_compile will cause this to fail ++ # if we don't check for them as well. ++ *) ++ for z in $available_tags; do ++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then ++ # Evaluate the configuration. ++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" ++ CC_quoted= ++ for arg in $CC; do ++ # Double-quote args containing other shell metacharacters. ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ CC_quoted="$CC_quoted $arg" ++ done ++ # user sometimes does CC=-gcc so we need to match that to 'gcc' ++ trimedcc=`echo ${CC} | $SED -e "s/${host}-//g"` ++ # and sometimes libtool has CC=-gcc but user does CC=gcc ++ extendcc=${host}-${CC} ++ # and sometimes libtool has CC=-gcc but user has CC=-gcc ++ # (Gentoo-specific hack because we always export $CHOST) ++ mungedcc=${CHOST-${host}}-${trimedcc} ++ case "$@ " in ++ "cc "* | " cc "* | "${host}-cc "* | " ${host}-cc "*|\ ++ "gcc "* | " gcc "* | "${host}-gcc "* | " ${host}-gcc "*) ++ tagname=CC ++ break ;; ++ "$trimedcc "* | " $trimedcc "* | "`$echo $trimedcc` "* | " `$echo $trimedcc` "*|\ ++ "$extendcc "* | " $extendcc "* | "`$echo $extendcc` "* | " `$echo $extendcc` "*|\ ++ "$mungedcc "* | " $mungedcc "* | "`$echo $mungedcc` "* | " `$echo $mungedcc` "*|\ ++ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ++ # The compiler in the base compile command matches ++ # the one in the tagged configuration. ++ # Assume this is the tagged configuration we want. ++ tagname=$z ++ break ++ ;; ++ esac ++ fi ++ done ++ # If $tagname still isn't set, then no tagged configuration ++ # was found and let the user know that the "--tag" command ++ # line option must be used. ++ if test -z "$tagname"; then ++ $echo "$modename: unable to infer tagged configuration" ++ $echo "$modename: specify a tag with \`--tag'" 1>&2 ++ exit $EXIT_FAILURE ++# else ++# $echo "$modename: using $tagname tagged configuration" ++ fi ++ ;; ++ esac ++ fi ++} ++ ++ ++# func_extract_an_archive dir oldlib ++func_extract_an_archive () ++{ ++ f_ex_an_ar_dir="$1"; shift ++ f_ex_an_ar_oldlib="$1" ++ ++ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" ++ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? ++ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++} ++ ++# func_extract_archives gentop oldlib ... ++func_extract_archives () ++{ ++ my_gentop="$1"; shift ++ my_oldlibs=${1+"$@"} ++ my_oldobjs="" ++ my_xlib="" ++ my_xabs="" ++ my_xdir="" ++ my_status="" ++ ++ $show "${rm}r $my_gentop" ++ $run ${rm}r "$my_gentop" ++ $show "$mkdir $my_gentop" ++ $run $mkdir "$my_gentop" ++ my_status=$? ++ if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then ++ exit $my_status ++ fi ++ ++ for my_xlib in $my_oldlibs; do ++ # Extract the objects. ++ case $my_xlib in ++ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; ++ *) my_xabs=`pwd`"/$my_xlib" ;; ++ esac ++ my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` ++ my_xdir="$my_gentop/$my_xlib" ++ ++ $show "${rm}r $my_xdir" ++ $run ${rm}r "$my_xdir" ++ $show "$mkdir $my_xdir" ++ $run $mkdir "$my_xdir" ++ exit_status=$? ++ if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then ++ exit $exit_status ++ fi ++ case $host in ++ *-darwin*) ++ $show "Extracting $my_xabs" ++ # Do not bother doing anything if just a dry run ++ if test -z "$run"; then ++ darwin_orig_dir=`pwd` ++ cd $my_xdir || exit $? ++ darwin_archive=$my_xabs ++ darwin_curdir=`pwd` ++ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` ++ darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` ++ if test -n "$darwin_arches"; then ++ darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` ++ darwin_arch= ++ $show "$darwin_base_archive has multiple architectures $darwin_arches" ++ for darwin_arch in $darwin_arches ; do ++ mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" ++ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ func_extract_an_archive "`pwd`" "${darwin_base_archive}" ++ cd "$darwin_curdir" ++ $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" ++ done # $darwin_arches ++ ## Okay now we have a bunch of thin objects, gotta fatten them up :) ++ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` ++ darwin_file= ++ darwin_files= ++ for darwin_file in $darwin_filelist; do ++ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` ++ lipo -create -output "$darwin_file" $darwin_files ++ done # $darwin_filelist ++ ${rm}r unfat-$$ ++ cd "$darwin_orig_dir" ++ else ++ cd "$darwin_orig_dir" ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ fi # $darwin_arches ++ fi # $run ++ ;; ++ *) ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ ;; ++ esac ++ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` ++ done ++ func_extract_archives_result="$my_oldobjs" ++} ++# End of Shell function definitions ++##################################### ++ ++# Darwin sucks ++eval std_shrext=\"$shrext_cmds\" ++ ++disable_libs=no ++ ++# Parse our command line options once, thoroughly. ++while test "$#" -gt 0 ++do ++ arg="$1" ++ shift ++ ++ case $arg in ++ -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; ++ *) optarg= ;; ++ esac ++ ++ # If the previous option needs an argument, assign it. ++ if test -n "$prev"; then ++ case $prev in ++ execute_dlfiles) ++ execute_dlfiles="$execute_dlfiles $arg" ++ ;; ++ tag) ++ tagname="$arg" ++ preserve_args="${preserve_args}=$arg" ++ ++ # Check whether tagname contains only valid characters ++ case $tagname in ++ *[!-_A-Za-z0-9,/]*) ++ $echo "$progname: invalid tag name: $tagname" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ ++ case $tagname in ++ CC) ++ # Don't test for the "default" C tag, as we know, it's there, but ++ # not specially marked. ++ ;; ++ *) ++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then ++ taglist="$taglist $tagname" ++ # Evaluate the configuration. ++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" ++ else ++ $echo "$progname: ignoring unknown tag $tagname" 1>&2 ++ fi ++ ;; ++ esac ++ ;; ++ *) ++ eval "$prev=\$arg" ++ ;; ++ esac ++ ++ prev= ++ prevopt= ++ continue ++ fi ++ ++ # Have we seen a non-optional argument yet? ++ case $arg in ++ --help) ++ show_help=yes ++ ;; ++ ++ --version) ++ $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" ++ $echo ++ $echo "Copyright (C) 2005 Free Software Foundation, Inc." ++ $echo "This is free software; see the source for copying conditions. There is NO" ++ $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." ++ exit $? ++ ;; ++ ++ --config) ++ ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath ++ # Now print the configurations for the tags. ++ for tagname in $taglist; do ++ ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" ++ done ++ exit $? ++ ;; ++ ++ --debug) ++ $echo "$progname: enabling shell trace mode" ++ set -x ++ preserve_args="$preserve_args $arg" ++ ;; ++ ++ --dry-run | -n) ++ run=: ++ ;; ++ ++ --features) ++ $echo "host: $host" ++ if test "$build_libtool_libs" = yes; then ++ $echo "enable shared libraries" ++ else ++ $echo "disable shared libraries" ++ fi ++ if test "$build_old_libs" = yes; then ++ $echo "enable static libraries" ++ else ++ $echo "disable static libraries" ++ fi ++ exit $? ++ ;; ++ ++ --finish) mode="finish" ;; ++ ++ --mode) prevopt="--mode" prev=mode ;; ++ --mode=*) mode="$optarg" ;; ++ ++ --preserve-dup-deps) duplicate_deps="yes" ;; ++ ++ --quiet | --silent) ++ show=: ++ preserve_args="$preserve_args $arg" ++ ;; ++ ++ --tag) ++ prevopt="--tag" ++ prev=tag ++ preserve_args="$preserve_args --tag" ++ ;; ++ --tag=*) ++ set tag "$optarg" ${1+"$@"} ++ shift ++ prev=tag ++ preserve_args="$preserve_args --tag" ++ ;; ++ ++ -dlopen) ++ prevopt="-dlopen" ++ prev=execute_dlfiles ++ ;; ++ ++ -*) ++ $echo "$modename: unrecognized option \`$arg'" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ ++ *) ++ nonopt="$arg" ++ break ++ ;; ++ esac ++done ++ ++if test -n "$prevopt"; then ++ $echo "$modename: option \`$prevopt' requires an argument" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++fi ++ ++case $disable_libs in ++no) ++ ;; ++shared) ++ build_libtool_libs=no ++ build_old_libs=yes ++ ;; ++static) ++ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` ++ ;; ++esac ++ ++# If this variable is set in any of the actions, the command in it ++# will be execed at the end. This prevents here-documents from being ++# left over by shells. ++exec_cmd= ++ ++if test -z "$show_help"; then ++ ++ # Infer the operation mode. ++ if test -z "$mode"; then ++ $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 ++ $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 ++ case $nonopt in ++ *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) ++ mode=link ++ for arg ++ do ++ case $arg in ++ -c) ++ mode=compile ++ break ++ ;; ++ esac ++ done ++ ;; ++ *db | *dbx | *strace | *truss) ++ mode=execute ++ ;; ++ *install*|cp|mv) ++ mode=install ++ ;; ++ *rm) ++ mode=uninstall ++ ;; ++ *) ++ # If we have no mode, but dlfiles were specified, then do execute mode. ++ test -n "$execute_dlfiles" && mode=execute ++ ++ # Just use the default operation mode. ++ if test -z "$mode"; then ++ if test -n "$nonopt"; then ++ $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 ++ else ++ $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 ++ fi ++ fi ++ ;; ++ esac ++ fi ++ ++ # Only execute mode is allowed to have -dlopen flags. ++ if test -n "$execute_dlfiles" && test "$mode" != execute; then ++ $echo "$modename: unrecognized option \`-dlopen'" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Change the help message to a mode-specific one. ++ generic_help="$help" ++ help="Try \`$modename --help --mode=$mode' for more information." ++ ++ # These modes are in order of execution frequency so that they run quickly. ++ case $mode in ++ # libtool compile mode ++ compile) ++ modename="$modename: compile" ++ # Get the compilation command and the source file. ++ base_compile= ++ srcfile="$nonopt" # always keep a non-empty value in "srcfile" ++ suppress_opt=yes ++ suppress_output= ++ arg_mode=normal ++ libobj= ++ later= ++ ++ for arg ++ do ++ case $arg_mode in ++ arg ) ++ # do not "continue". Instead, add this to base_compile ++ lastarg="$arg" ++ arg_mode=normal ++ ;; ++ ++ target ) ++ libobj="$arg" ++ arg_mode=normal ++ continue ++ ;; ++ ++ normal ) ++ # Accept any command-line options. ++ case $arg in ++ -o) ++ if test -n "$libobj" ; then ++ $echo "$modename: you cannot specify \`-o' more than once" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ arg_mode=target ++ continue ++ ;; ++ ++ -static | -prefer-pic | -prefer-non-pic) ++ later="$later $arg" ++ continue ++ ;; ++ ++ -no-suppress) ++ suppress_opt=no ++ continue ++ ;; ++ ++ -Xcompiler) ++ arg_mode=arg # the next one goes into the "base_compile" arg list ++ continue # The current "srcfile" will either be retained or ++ ;; # replaced later. I would guess that would be a bug. ++ ++ -Wc,*) ++ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` ++ lastarg= ++ save_ifs="$IFS"; IFS=',' ++ for arg in $args; do ++ IFS="$save_ifs" ++ ++ # Double-quote args containing other shell metacharacters. ++ # Many Bourne shells cannot handle close brackets correctly ++ # in scan sets, so we specify it separately. ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ lastarg="$lastarg $arg" ++ done ++ IFS="$save_ifs" ++ lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` ++ ++ # Add the arguments to base_compile. ++ base_compile="$base_compile $lastarg" ++ continue ++ ;; ++ ++ * ) ++ # Accept the current argument as the source file. ++ # The previous "srcfile" becomes the current argument. ++ # ++ lastarg="$srcfile" ++ srcfile="$arg" ++ ;; ++ esac # case $arg ++ ;; ++ esac # case $arg_mode ++ ++ # Aesthetically quote the previous argument. ++ lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` ++ ++ case $lastarg in ++ # Double-quote args containing other shell metacharacters. ++ # Many Bourne shells cannot handle close brackets correctly ++ # in scan sets, and some SunOS ksh mistreat backslash-escaping ++ # in scan sets (worked around with variable expansion), ++ # and furthermore cannot handle '|' '&' '(' ')' in scan sets ++ # at all, so we specify them separately. ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ lastarg="\"$lastarg\"" ++ ;; ++ esac ++ ++ base_compile="$base_compile $lastarg" ++ done # for arg ++ ++ case $arg_mode in ++ arg) ++ $echo "$modename: you must specify an argument for -Xcompile" ++ exit $EXIT_FAILURE ++ ;; ++ target) ++ $echo "$modename: you must specify a target with \`-o'" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ *) ++ # Get the name of the library object. ++ [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ++ ;; ++ esac ++ ++ # Recognize several different file suffixes. ++ # If the user specifies -o file.o, it is replaced with file.lo ++ xform='[cCFSifmso]' ++ case $libobj in ++ *.ada) xform=ada ;; ++ *.adb) xform=adb ;; ++ *.ads) xform=ads ;; ++ *.asm) xform=asm ;; ++ *.c++) xform=c++ ;; ++ *.cc) xform=cc ;; ++ *.ii) xform=ii ;; ++ *.class) xform=class ;; ++ *.cpp) xform=cpp ;; ++ *.cxx) xform=cxx ;; ++ *.f90) xform=f90 ;; ++ *.for) xform=for ;; ++ *.java) xform=java ;; ++ esac ++ ++ libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` ++ ++ case $libobj in ++ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; ++ *) ++ $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ ++ func_infer_tag $base_compile ++ ++ for arg in $later; do ++ case $arg in ++ -static) ++ build_old_libs=yes ++ continue ++ ;; ++ ++ -prefer-pic) ++ pic_mode=yes ++ continue ++ ;; ++ ++ -prefer-non-pic) ++ pic_mode=no ++ continue ++ ;; ++ esac ++ done ++ ++ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` ++ case $qlibobj in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ qlibobj="\"$qlibobj\"" ;; ++ esac ++ test "X$libobj" != "X$qlibobj" \ ++ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ ++ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." ++ objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` ++ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$obj"; then ++ xdir= ++ else ++ xdir=$xdir/ ++ fi ++ lobj=${xdir}$objdir/$objname ++ ++ if test -z "$base_compile"; then ++ $echo "$modename: you must specify a compilation command" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Delete any leftover library objects. ++ if test "$build_old_libs" = yes; then ++ removelist="$obj $lobj $libobj ${libobj}T" ++ else ++ removelist="$lobj $libobj ${libobj}T" ++ fi ++ ++ $run $rm $removelist ++ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 ++ ++ # On Cygwin there's no "real" PIC flag so we must build both object types ++ case $host_os in ++ cygwin* | mingw* | pw32* | os2*) ++ pic_mode=default ++ ;; ++ esac ++ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then ++ # non-PIC code in shared libraries is not supported ++ pic_mode=default ++ fi ++ ++ # Calculate the filename of the output object if compiler does ++ # not support -o with -c ++ if test "$compiler_c_o" = no; then ++ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} ++ lockfile="$output_obj.lock" ++ removelist="$removelist $output_obj $lockfile" ++ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 ++ else ++ output_obj= ++ need_locks=no ++ lockfile= ++ fi ++ ++ # Lock this critical section if it is needed ++ # We use this script file to make the link, it avoids creating a new file ++ if test "$need_locks" = yes; then ++ until $run ln "$srcfile" "$lockfile" 2>/dev/null; do ++ $show "Waiting for $lockfile to be removed" ++ sleep 2 ++ done ++ elif test "$need_locks" = warn; then ++ if test -f "$lockfile"; then ++ $echo "\ ++*** ERROR, $lockfile exists and contains: ++`cat $lockfile 2>/dev/null` ++ ++This indicates that another process is trying to use the same ++temporary object file, and libtool could not work around it because ++your compiler does not support \`-c' and \`-o' together. If you ++repeat this compilation, it may succeed, by chance, but you had better ++avoid parallel builds (make -j) in this platform, or get a better ++compiler." ++ ++ $run $rm $removelist ++ exit $EXIT_FAILURE ++ fi ++ $echo "$srcfile" > "$lockfile" ++ fi ++ ++ if test -n "$fix_srcfile_path"; then ++ eval srcfile=\"$fix_srcfile_path\" ++ fi ++ qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` ++ case $qsrcfile in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ qsrcfile="\"$qsrcfile\"" ;; ++ esac ++ ++ $run $rm "$libobj" "${libobj}T" ++ ++ # Create a libtool object file (analogous to a ".la" file), ++ # but don't create it if we're doing a dry run. ++ test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then ++ $echo "\ ++*** ERROR, $lockfile contains: ++`cat $lockfile 2>/dev/null` ++ ++but it should contain: ++$srcfile ++ ++This indicates that another process is trying to use the same ++temporary object file, and libtool could not work around it because ++your compiler does not support \`-c' and \`-o' together. If you ++repeat this compilation, it may succeed, by chance, but you had better ++avoid parallel builds (make -j) in this platform, or get a better ++compiler." ++ ++ $run $rm $removelist ++ exit $EXIT_FAILURE ++ fi ++ ++ # Just move the object if needed, then go on to compile the next one ++ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then ++ $show "$mv $output_obj $lobj" ++ if $run $mv $output_obj $lobj; then : ++ else ++ error=$? ++ $run $rm $removelist ++ exit $error ++ fi ++ fi ++ ++ # Append the name of the PIC object to the libtool object file. ++ test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then ++ $echo "\ ++*** ERROR, $lockfile contains: ++`cat $lockfile 2>/dev/null` ++ ++but it should contain: ++$srcfile ++ ++This indicates that another process is trying to use the same ++temporary object file, and libtool could not work around it because ++your compiler does not support \`-c' and \`-o' together. If you ++repeat this compilation, it may succeed, by chance, but you had better ++avoid parallel builds (make -j) in this platform, or get a better ++compiler." ++ ++ $run $rm $removelist ++ exit $EXIT_FAILURE ++ fi ++ ++ # Just move the object if needed ++ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then ++ $show "$mv $output_obj $obj" ++ if $run $mv $output_obj $obj; then : ++ else ++ error=$? ++ $run $rm $removelist ++ exit $error ++ fi ++ fi ++ ++ # Append the name of the non-PIC object the libtool object file. ++ # Only append if the libtool object file exists. ++ test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 ++ fi ++ if test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static ++ fi ++ prefer_static_libs=yes ++ else ++ if test -z "$pic_flag" && test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static ++ fi ++ prefer_static_libs=built ++ fi ++ build_libtool_libs=no ++ build_old_libs=yes ++ break ++ ;; ++ esac ++ done ++ ++ # See if our shared archives depend on static archives. ++ test -n "$old_archive_from_new_cmds" && build_old_libs=yes ++ ++ # Go through the arguments, transforming them on the way. ++ while test "$#" -gt 0; do ++ arg="$1" ++ shift ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test ++ ;; ++ *) qarg=$arg ;; ++ esac ++ libtool_args="$libtool_args $qarg" ++ ++ # If the previous option needs an argument, assign it. ++ if test -n "$prev"; then ++ case $prev in ++ output) ++ compile_command="$compile_command @OUTPUT@" ++ finalize_command="$finalize_command @OUTPUT@" ++ ;; ++ esac ++ ++ case $prev in ++ dlfiles|dlprefiles) ++ if test "$preload" = no; then ++ # Add the symbol object into the linking commands. ++ compile_command="$compile_command @SYMFILE@" ++ finalize_command="$finalize_command @SYMFILE@" ++ preload=yes ++ fi ++ case $arg in ++ *.la | *.lo) ;; # We handle these cases below. ++ force) ++ if test "$dlself" = no; then ++ dlself=needless ++ export_dynamic=yes ++ fi ++ prev= ++ continue ++ ;; ++ self) ++ if test "$prev" = dlprefiles; then ++ dlself=yes ++ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then ++ dlself=yes ++ else ++ dlself=needless ++ export_dynamic=yes ++ fi ++ prev= ++ continue ++ ;; ++ *) ++ if test "$prev" = dlfiles; then ++ dlfiles="$dlfiles $arg" ++ else ++ dlprefiles="$dlprefiles $arg" ++ fi ++ prev= ++ continue ++ ;; ++ esac ++ ;; ++ expsyms) ++ export_symbols="$arg" ++ if test ! -f "$arg"; then ++ $echo "$modename: symbol file \`$arg' does not exist" ++ exit $EXIT_FAILURE ++ fi ++ prev= ++ continue ++ ;; ++ expsyms_regex) ++ export_symbols_regex="$arg" ++ prev= ++ continue ++ ;; ++ inst_prefix) ++ inst_prefix_dir="$arg" ++ prev= ++ continue ++ ;; ++ precious_regex) ++ precious_files_regex="$arg" ++ prev= ++ continue ++ ;; ++ release) ++ release="-$arg" ++ prev= ++ continue ++ ;; ++ objectlist) ++ if test -f "$arg"; then ++ save_arg=$arg ++ moreargs= ++ for fil in `cat $save_arg` ++ do ++# moreargs="$moreargs $fil" ++ arg=$fil ++ # A libtool-controlled object. ++ ++ # Check to see that this really is a libtool object. ++ if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ pic_object= ++ non_pic_object= ++ ++ # Read the .lo file ++ # If there is no directory component, then add one. ++ case $arg in ++ */* | *\\*) . $arg ;; ++ *) . ./$arg ;; ++ esac ++ ++ if test -z "$pic_object" || \ ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && \ ++ test "$non_pic_object" = none; then ++ $echo "$modename: cannot find name of object for \`$arg'" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Extract subdirectory from the argument. ++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$arg"; then ++ xdir= ++ else ++ xdir="$xdir/" ++ fi ++ ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" ++ ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi ++ ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= ++ fi ++ ++ # A PIC object. ++ libobjs="$libobjs $pic_object" ++ arg="$pic_object" ++ fi ++ ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" ++ ++ # A standard non-PIC object ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi ++ else ++ # Only an error if not doing a dry-run. ++ if test -z "$run"; then ++ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 ++ exit $EXIT_FAILURE ++ else ++ # Dry-run case. ++ ++ # Extract subdirectory from the argument. ++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$arg"; then ++ xdir= ++ else ++ xdir="$xdir/" ++ fi ++ ++ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` ++ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` ++ libobjs="$libobjs $pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi ++ fi ++ done ++ else ++ $echo "$modename: link input file \`$save_arg' does not exist" ++ exit $EXIT_FAILURE ++ fi ++ arg=$save_arg ++ prev= ++ continue ++ ;; ++ rpath | xrpath) ++ # We need an absolute path. ++ case $arg in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ $echo "$modename: only absolute run-paths are allowed" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ if test "$prev" = rpath; then ++ case "$rpath " in ++ *" $arg "*) ;; ++ *) rpath="$rpath $arg" ;; ++ esac ++ else ++ case "$xrpath " in ++ *" $arg "*) ;; ++ *) xrpath="$xrpath $arg" ;; ++ esac ++ fi ++ prev= ++ continue ++ ;; ++ xcompiler) ++ compiler_flags="$compiler_flags $qarg" ++ prev= ++ compile_command="$compile_command $qarg" ++ finalize_command="$finalize_command $qarg" ++ continue ++ ;; ++ xlinker) ++ linker_flags="$linker_flags $qarg" ++ compiler_flags="$compiler_flags $wl$qarg" ++ prev= ++ compile_command="$compile_command $wl$qarg" ++ finalize_command="$finalize_command $wl$qarg" ++ continue ++ ;; ++ xcclinker) ++ linker_flags="$linker_flags $qarg" ++ compiler_flags="$compiler_flags $qarg" ++ prev= ++ compile_command="$compile_command $qarg" ++ finalize_command="$finalize_command $qarg" ++ continue ++ ;; ++ shrext) ++ shrext_cmds="$arg" ++ prev= ++ continue ++ ;; ++ darwin_framework|darwin_framework_skip) ++ test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ prev= ++ continue ++ ;; ++ *) ++ eval "$prev=\"\$arg\"" ++ prev= ++ continue ++ ;; ++ esac ++ fi # test -n "$prev" ++ ++ prevarg="$arg" ++ ++ case $arg in ++ -all-static) ++ if test -n "$link_static_flag"; then ++ compile_command="$compile_command $link_static_flag" ++ finalize_command="$finalize_command $link_static_flag" ++ fi ++ continue ++ ;; ++ ++ -allow-undefined) ++ # FIXME: remove this flag sometime in the future. ++ $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 ++ continue ++ ;; ++ ++ -avoid-version) ++ avoid_version=yes ++ continue ++ ;; ++ ++ -dlopen) ++ prev=dlfiles ++ continue ++ ;; ++ ++ -dlpreopen) ++ prev=dlprefiles ++ continue ++ ;; ++ ++ -export-dynamic) ++ export_dynamic=yes ++ continue ++ ;; ++ ++ -export-symbols | -export-symbols-regex) ++ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then ++ $echo "$modename: more than one -exported-symbols argument is not allowed" ++ exit $EXIT_FAILURE ++ fi ++ if test "X$arg" = "X-export-symbols"; then ++ prev=expsyms ++ else ++ prev=expsyms_regex ++ fi ++ continue ++ ;; ++ ++ -framework|-arch|-isysroot) ++ case " $CC " in ++ *" ${arg} ${1} "* | *" ${arg} ${1} "*) ++ prev=darwin_framework_skip ;; ++ *) compiler_flags="$compiler_flags $arg" ++ prev=darwin_framework ;; ++ esac ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ continue ++ ;; ++ ++ -inst-prefix-dir) ++ prev=inst_prefix ++ continue ++ ;; ++ ++ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* ++ # so, if we see these flags be careful not to treat them like -L ++ -L[A-Z][A-Z]*:*) ++ case $with_gcc/$host in ++ no/*-*-irix* | /*-*-irix*) ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ ;; ++ esac ++ continue ++ ;; ++ ++ -L*) ++ dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ absdir=`cd "$dir" && pwd` ++ if test -z "$absdir"; then ++ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 ++ absdir="$dir" ++ notinst_path="$notinst_path $dir" ++ fi ++ dir="$absdir" ++ ;; ++ esac ++ case "$deplibs " in ++ *" -L$dir "*) ;; ++ *) ++ deplibs="$deplibs -L$dir" ++ lib_search_path="$lib_search_path $dir" ++ ;; ++ esac ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` ++ case :$dllsearchpath: in ++ *":$dir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$dir";; ++ esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac ++ ;; ++ esac ++ continue ++ ;; ++ ++ -l*) ++ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) ++ # These systems don't actually have a C or math library (as such) ++ continue ++ ;; ++ *-*-os2*) ++ # These systems don't actually have a C library (as such) ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc due to us having libc/libc_r. ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # Rhapsody C and math libraries are in the System framework ++ deplibs="$deplibs -framework System" ++ continue ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ test "X$arg" = "X-lc" && continue ++ ;; ++ esac ++ elif test "X$arg" = "X-lc_r"; then ++ case $host in ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc_r directly, use -pthread flag. ++ continue ++ ;; ++ esac ++ fi ++ deplibs="$deplibs $arg" ++ continue ++ ;; ++ ++ # Tru64 UNIX uses -model [arg] to determine the layout of C++ ++ # classes, name mangling, and exception handling. ++ -model) ++ compile_command="$compile_command $arg" ++ compiler_flags="$compiler_flags $arg" ++ finalize_command="$finalize_command $arg" ++ prev=xcompiler ++ continue ++ ;; ++ ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) ++ compiler_flags="$compiler_flags $arg" ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ continue ++ ;; ++ ++ -module) ++ module=yes ++ continue ++ ;; ++ ++ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler ++ # -r[0-9][0-9]* specifies the processor on the SGI compiler ++ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler ++ # +DA*, +DD* enable 64-bit mode on the HP compiler ++ # -q* pass through compiler args for the IBM compiler ++ # -m* pass through architecture-specific compiler args for GCC ++ # -m*, -t[45]*, -txscale* pass through architecture-specific ++ # compiler args for GCC ++ # -pg pass through profiling flag for GCC ++ # @file GCC response files ++ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \ ++ -t[45]*|-txscale*|@*) ++ ++ # Unknown arguments in both finalize_command and compile_command need ++ # to be aesthetically quoted because they are evaled later. ++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ compiler_flags="$compiler_flags $arg" ++ continue ++ ;; ++ ++ -shrext) ++ prev=shrext ++ continue ++ ;; ++ ++ -no-fast-install) ++ fast_install=no ++ continue ++ ;; ++ ++ -no-install) ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ # The PATH hackery in wrapper scripts is required on Windows ++ # in order for the loader to find any dlls it needs. ++ $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 ++ $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 ++ fast_install=no ++ ;; ++ *) no_install=yes ;; ++ esac ++ continue ++ ;; ++ ++ -no-undefined) ++ allow_undefined=no ++ continue ++ ;; ++ ++ -objectlist) ++ prev=objectlist ++ continue ++ ;; ++ ++ -o) prev=output ;; ++ ++ -precious-files-regex) ++ prev=precious_regex ++ continue ++ ;; ++ ++ -release) ++ prev=release ++ continue ++ ;; ++ ++ -rpath) ++ prev=rpath ++ continue ++ ;; ++ ++ -R) ++ prev=xrpath ++ continue ++ ;; ++ ++ -R*) ++ dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ $echo "$modename: only absolute run-paths are allowed" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ case "$xrpath " in ++ *" $dir "*) ;; ++ *) xrpath="$xrpath $dir" ;; ++ esac ++ continue ++ ;; ++ ++ -static) ++ # The effects of -static are defined in a previous loop. ++ # We used to do the same as -all-static on platforms that ++ # didn't have a PIC flag, but the assumption that the effects ++ # would be equivalent was wrong. It would break on at least ++ # Digital Unix and AIX. ++ continue ++ ;; ++ ++ -thread-safe) ++ thread_safe=yes ++ continue ++ ;; ++ ++ -version-info) ++ prev=vinfo ++ continue ++ ;; ++ -version-number) ++ prev=vinfo ++ vinfo_number=yes ++ continue ++ ;; ++ ++ -Wc,*) ++ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` ++ arg= ++ save_ifs="$IFS"; IFS=',' ++ for flag in $args; do ++ IFS="$save_ifs" ++ case $flag in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ flag="\"$flag\"" ++ ;; ++ esac ++ arg="$arg $wl$flag" ++ compiler_flags="$compiler_flags $flag" ++ done ++ IFS="$save_ifs" ++ arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ++ ;; ++ ++ -Wl,*) ++ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` ++ arg= ++ save_ifs="$IFS"; IFS=',' ++ for flag in $args; do ++ IFS="$save_ifs" ++ case $flag in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ flag="\"$flag\"" ++ ;; ++ esac ++ arg="$arg $wl$flag" ++ compiler_flags="$compiler_flags $wl$flag" ++ linker_flags="$linker_flags $flag" ++ done ++ IFS="$save_ifs" ++ arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ++ ;; ++ ++ -Xcompiler) ++ prev=xcompiler ++ continue ++ ;; ++ ++ -Xlinker) ++ prev=xlinker ++ continue ++ ;; ++ ++ -XCClinker) ++ prev=xcclinker ++ continue ++ ;; ++ ++ # Some other compiler flag. ++ -* | +*) ++ # Unknown arguments in both finalize_command and compile_command need ++ # to be aesthetically quoted because they are evaled later. ++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ ;; ++ ++ *.$objext) ++ # A standard object. ++ objs="$objs $arg" ++ ;; ++ ++ *.lo) ++ # A libtool-controlled object. ++ ++ # Check to see that this really is a libtool object. ++ if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ pic_object= ++ non_pic_object= ++ ++ # Read the .lo file ++ # If there is no directory component, then add one. ++ case $arg in ++ */* | *\\*) . $arg ;; ++ *) . ./$arg ;; ++ esac ++ ++ if test -z "$pic_object" || \ ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && \ ++ test "$non_pic_object" = none; then ++ $echo "$modename: cannot find name of object for \`$arg'" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Extract subdirectory from the argument. ++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$arg"; then ++ xdir= ++ else ++ xdir="$xdir/" ++ fi ++ ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" ++ ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi ++ ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= ++ fi ++ ++ # A PIC object. ++ libobjs="$libobjs $pic_object" ++ arg="$pic_object" ++ fi ++ ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" ++ ++ # A standard non-PIC object ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi ++ else ++ # Only an error if not doing a dry-run. ++ if test -z "$run"; then ++ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 ++ exit $EXIT_FAILURE ++ else ++ # Dry-run case. ++ ++ # Extract subdirectory from the argument. ++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$arg"; then ++ xdir= ++ else ++ xdir="$xdir/" ++ fi ++ ++ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` ++ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` ++ libobjs="$libobjs $pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi ++ fi ++ ;; ++ ++ *.$libext) ++ # An archive. ++ deplibs="$deplibs $arg" ++ old_deplibs="$old_deplibs $arg" ++ continue ++ ;; ++ ++ *.la) ++ # A libtool-controlled library. ++ ++ if test "$prev" = dlfiles; then ++ # This library was specified with -dlopen. ++ dlfiles="$dlfiles $arg" ++ prev= ++ elif test "$prev" = dlprefiles; then ++ # The library was specified with -dlpreopen. ++ dlprefiles="$dlprefiles $arg" ++ prev= ++ else ++ deplibs="$deplibs $arg" ++ fi ++ continue ++ ;; ++ ++ # Some other compiler argument. ++ *) ++ # Unknown arguments in both finalize_command and compile_command need ++ # to be aesthetically quoted because they are evaled later. ++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ ;; ++ esac # arg ++ ++ # Now actually substitute the argument into the commands. ++ if test -n "$arg"; then ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ fi ++ done # argument parsing loop ++ ++ if test -n "$prev"; then ++ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then ++ eval arg=\"$export_dynamic_flag_spec\" ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ fi ++ ++ oldlibs= ++ # calculate the name of the file, without its directory ++ outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` ++ libobjs_save="$libobjs" ++ ++ if test -n "$shlibpath_var"; then ++ # get the directories listed in $shlibpath_var ++ eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` ++ else ++ shlib_search_path= ++ fi ++ eval sys_lib_search_path=\"$sys_lib_search_path_spec\" ++ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" ++ ++ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$output_objdir" = "X$output"; then ++ output_objdir="$objdir" ++ else ++ output_objdir="$output_objdir/$objdir" ++ fi ++ # Create the object directory. ++ if test ! -d "$output_objdir"; then ++ $show "$mkdir $output_objdir" ++ $run $mkdir $output_objdir ++ exit_status=$? ++ if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then ++ exit $exit_status ++ fi ++ fi ++ ++ # Determine the type of output ++ case $output in ++ "") ++ $echo "$modename: you must specify an output file" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ *.$libext) linkmode=oldlib ;; ++ *.lo | *.$objext) linkmode=obj ;; ++ *.la) linkmode=lib ;; ++ *) linkmode=prog ;; # Anything else should be a program. ++ esac ++ ++ case $host in ++ *cygwin* | *mingw* | *pw32*) ++ # don't eliminate duplications in $postdeps and $predeps ++ duplicate_compiler_generated_deps=yes ++ ;; ++ *) ++ duplicate_compiler_generated_deps=$duplicate_deps ++ ;; ++ esac ++ specialdeplibs= ++ ++ libs= ++ # Find all interdependent deplibs by searching for libraries ++ # that are linked more than once (e.g. -la -lb -la) ++ for deplib in $deplibs; do ++ if test "X$duplicate_deps" = "Xyes" ; then ++ case "$libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ libs="$libs $deplib" ++ done ++ ++ if test "$linkmode" = lib; then ++ libs="$predeps $libs $compiler_lib_search_path $postdeps" ++ ++ # Compute libraries that are listed more than once in $predeps ++ # $postdeps and mark them as special (i.e., whose duplicates are ++ # not to be eliminated). ++ pre_post_deps= ++ if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then ++ for pre_post_dep in $predeps $postdeps; do ++ case "$pre_post_deps " in ++ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; ++ esac ++ pre_post_deps="$pre_post_deps $pre_post_dep" ++ done ++ fi ++ pre_post_deps= ++ fi ++ ++ deplibs= ++ newdependency_libs= ++ newlib_search_path= ++ need_relink=no # whether we're linking any uninstalled libtool libraries ++ notinst_deplibs= # not-installed libtool libraries ++ case $linkmode in ++ lib) ++ passes="conv link" ++ for file in $dlfiles $dlprefiles; do ++ case $file in ++ *.la) ;; ++ *) ++ $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ done ++ ;; ++ prog) ++ compile_deplibs= ++ finalize_deplibs= ++ alldeplibs=no ++ newdlfiles= ++ newdlprefiles= ++ passes="conv scan dlopen dlpreopen link" ++ ;; ++ *) passes="conv" ++ ;; ++ esac ++ for pass in $passes; do ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan"; then ++ libs="$deplibs" ++ deplibs= ++ fi ++ if test "$linkmode" = prog; then ++ case $pass in ++ dlopen) libs="$dlfiles" ;; ++ dlpreopen) libs="$dlprefiles" ;; ++ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; ++ esac ++ fi ++ if test "$pass" = dlopen; then ++ # Collect dlpreopened libraries ++ save_deplibs="$deplibs" ++ deplibs= ++ fi ++ for deplib in $libs; do ++ lib= ++ found=no ++ case $deplib in ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ compiler_flags="$compiler_flags $deplib" ++ fi ++ continue ++ ;; ++ -l*) ++ if test "$linkmode" != lib && test "$linkmode" != prog; then ++ $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 ++ continue ++ fi ++ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` ++ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ for search_ext in .la $std_shrext .so .a; do ++ # Search the libtool library ++ lib="$searchdir/lib${name}${search_ext}" ++ if test -f "$lib"; then ++ if test "$search_ext" = ".la"; then ++ found=yes ++ else ++ found=no ++ fi ++ break 2 ++ fi ++ done ++ done ++ if test "$found" != yes; then ++ # deplib doesn't seem to be a libtool library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi ++ continue ++ else # deplib is a libtool library ++ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, ++ # We need to do some special things here, and not later. ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $deplib "*) ++ if (${SED} -e '2q' $lib | ++ grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ library_names= ++ old_library= ++ case $lib in ++ */* | *\\*) . $lib ;; ++ *) . ./$lib ;; ++ esac ++ for l in $old_library $library_names; do ++ ll="$l" ++ done ++ if test "X$ll" = "X$old_library" ; then # only static version available ++ found=no ++ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` ++ test "X$ladir" = "X$lib" && ladir="." ++ lib=$ladir/$old_library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi ++ continue ++ fi ++ fi ++ ;; ++ *) ;; ++ esac ++ fi ++ fi ++ ;; # -l ++ -L*) ++ case $linkmode in ++ lib) ++ deplibs="$deplib $deplibs" ++ test "$pass" = conv && continue ++ newdependency_libs="$deplib $newdependency_libs" ++ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ++ ;; ++ prog) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ continue ++ fi ++ if test "$pass" = scan; then ++ deplibs="$deplib $deplibs" ++ else ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ fi ++ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ++ ;; ++ *) ++ $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 ++ ;; ++ esac # linkmode ++ continue ++ ;; # -L ++ -R*) ++ if test "$pass" = link; then ++ dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` ++ # Make sure the xrpath contains only unique directories. ++ case "$xrpath " in ++ *" $dir "*) ;; ++ *) xrpath="$xrpath $dir" ;; ++ esac ++ fi ++ deplibs="$deplib $deplibs" ++ continue ++ ;; ++ *.la) lib="$deplib" ;; ++ *.$libext) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ continue ++ fi ++ case $linkmode in ++ lib) ++ valid_a_lib=no ++ case $deplibs_check_method in ++ match_pattern*) ++ set dummy $deplibs_check_method ++ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` ++ if eval $echo \"$deplib\" 2>/dev/null \ ++ | $SED 10q \ ++ | $EGREP "$match_pattern_regex" > /dev/null; then ++ valid_a_lib=yes ++ fi ++ ;; ++ pass_all) ++ valid_a_lib=yes ++ ;; ++ esac ++ if test "$valid_a_lib" != yes; then ++ $echo ++ $echo "*** Warning: Trying to link with static lib archive $deplib." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have" ++ $echo "*** because the file extensions .$libext of this argument makes me believe" ++ $echo "*** that it is just a static archive that I should not used here." ++ else ++ $echo ++ $echo "*** Warning: Linking the shared library $output against the" ++ $echo "*** static library $deplib is not portable!" ++ deplibs="$deplib $deplibs" ++ fi ++ continue ++ ;; ++ prog) ++ if test "$pass" != link; then ++ deplibs="$deplib $deplibs" ++ else ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ fi ++ continue ++ ;; ++ esac # linkmode ++ ;; # *.$libext ++ *.lo | *.$objext) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ elif test "$linkmode" = prog; then ++ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then ++ # If there is no dlopen support or we're linking statically, ++ # we need to preload. ++ newdlprefiles="$newdlprefiles $deplib" ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ newdlfiles="$newdlfiles $deplib" ++ fi ++ fi ++ continue ++ ;; ++ %DEPLIBS%) ++ alldeplibs=yes ++ continue ++ ;; ++ esac # case $deplib ++ if test "$found" = yes || test -f "$lib"; then : ++ else ++ $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Check to see that this really is a libtool archive. ++ if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : ++ else ++ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` ++ test "X$ladir" = "X$lib" && ladir="." ++ ++ dlname= ++ dlopen= ++ dlpreopen= ++ libdir= ++ library_names= ++ old_library= ++ # If the library was installed with an old release of libtool, ++ # it will not redefine variables installed, or shouldnotlink ++ installed=yes ++ shouldnotlink=no ++ avoidtemprpath= ++ ++ ++ # Read the .la file ++ case $lib in ++ */* | *\\*) . $lib ;; ++ *) . ./$lib ;; ++ esac ++ ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan" || ++ { test "$linkmode" != prog && test "$linkmode" != lib; }; then ++ test -n "$dlopen" && dlfiles="$dlfiles $dlopen" ++ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" ++ fi ++ ++ if test "$pass" = conv; then ++ # Only check for convenience libraries ++ deplibs="$lib $deplibs" ++ if test -z "$libdir"; then ++ if test -z "$old_library"; then ++ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ # It is a libtool convenience library, so add in its objects. ++ convenience="$convenience $ladir/$objdir/$old_library" ++ old_convenience="$old_convenience $ladir/$objdir/$old_library" ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ deplibs="$deplib $deplibs" ++ if test "X$duplicate_deps" = "Xyes" ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ tmp_libs="$tmp_libs $deplib" ++ done ++ elif test "$linkmode" != prog && test "$linkmode" != lib; then ++ $echo "$modename: \`$lib' is not a convenience library" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ continue ++ fi # $pass = conv ++ ++ ++ # Get the name of the library we link against. ++ linklib= ++ for l in $old_library $library_names; do ++ linklib="$l" ++ done ++ if test -z "$linklib"; then ++ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # This library was specified with -dlopen. ++ if test "$pass" = dlopen; then ++ if test -z "$libdir"; then ++ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ if test -z "$dlname" || ++ test "$dlopen_support" != yes || ++ test "$build_libtool_libs" = no; then ++ # If there is no dlname, no dlopen support or we're linking ++ # statically, we need to preload. We also need to preload any ++ # dependent libraries so libltdl's deplib preloader doesn't ++ # bomb out in the load deplibs phase. ++ dlprefiles="$dlprefiles $lib $dependency_libs" ++ else ++ newdlfiles="$newdlfiles $lib" ++ fi ++ continue ++ fi # $pass = dlopen ++ ++ # We need an absolute path. ++ case $ladir in ++ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; ++ *) ++ abs_ladir=`cd "$ladir" && pwd` ++ if test -z "$abs_ladir"; then ++ $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 ++ $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 ++ abs_ladir="$ladir" ++ fi ++ ;; ++ esac ++ laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` ++ ++ # Find the relevant object directory and library name. ++ if test "X$installed" = Xyes; then ++ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ $echo "$modename: warning: library \`$lib' was moved." 1>&2 ++ dir="$ladir" ++ absdir="$abs_ladir" ++ libdir="$abs_ladir" ++ else ++ dir="$libdir" ++ absdir="$libdir" ++ fi ++ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes ++ else ++ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ dir="$ladir" ++ absdir="$abs_ladir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ else ++ dir="$ladir/$objdir" ++ absdir="$abs_ladir/$objdir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ fi ++ fi # $installed = yes ++ name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` ++ ++ # This library was specified with -dlpreopen. ++ if test "$pass" = dlpreopen; then ++ if test -z "$libdir"; then ++ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ # Prefer using a static library (so that no silly _DYNAMIC symbols ++ # are required to link). ++ if test -n "$old_library"; then ++ newdlprefiles="$newdlprefiles $dir/$old_library" ++ # Otherwise, use the dlname, so that lt_dlopen finds it. ++ elif test -n "$dlname"; then ++ newdlprefiles="$newdlprefiles $dir/$dlname" ++ else ++ newdlprefiles="$newdlprefiles $dir/$linklib" ++ fi ++ fi # $pass = dlpreopen ++ ++ if test -z "$libdir"; then ++ # Link the convenience library ++ if test "$linkmode" = lib; then ++ deplibs="$dir/$old_library $deplibs" ++ elif test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$dir/$old_library $compile_deplibs" ++ finalize_deplibs="$dir/$old_library $finalize_deplibs" ++ else ++ deplibs="$lib $deplibs" # used for prog,scan pass ++ fi ++ continue ++ fi ++ ++ ++ if test "$linkmode" = prog && test "$pass" != link; then ++ newlib_search_path="$newlib_search_path $ladir" ++ deplibs="$lib $deplibs" ++ ++ linkalldeplibs=no ++ if test "$link_all_deplibs" != no || test -z "$library_names" || ++ test "$build_libtool_libs" = no; then ++ linkalldeplibs=yes ++ fi ++ ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ case $deplib in ++ -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test ++ esac ++ # Need to link against all dependency_libs? ++ if test "$linkalldeplibs" = yes; then ++ deplibs="$deplib $deplibs" ++ else ++ # Need to hardcode shared library paths ++ # or/and link against static libraries ++ newdependency_libs="$deplib $newdependency_libs" ++ fi ++ if test "X$duplicate_deps" = "Xyes" ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ tmp_libs="$tmp_libs $deplib" ++ done # for deplib ++ continue ++ fi # $linkmode = prog... ++ ++ if test "$linkmode,$pass" = "prog,link"; then ++ if test -n "$library_names" && ++ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then ++ # We need to hardcode the library path ++ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then ++ # Make sure the rpath contains only unique directories. ++ case "$temp_rpath " in ++ *" $dir "*) ;; ++ *" $absdir "*) ;; ++ *) temp_rpath="$temp_rpath $absdir" ;; ++ esac ++ fi ++ ++ # Hardcode the library path. ++ # Skip directories that are in the system default run-time ++ # search path. ++ case " $sys_lib_dlsearch_path " in ++ *" $absdir "*) ;; ++ *) ++ case "$compile_rpath " in ++ *" $absdir "*) ;; ++ *) compile_rpath="$compile_rpath $absdir" ++ esac ++ ;; ++ esac ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ++ esac ++ ;; ++ esac ++ fi # $linkmode,$pass = prog,link... ++ ++ if test "$alldeplibs" = yes && ++ { test "$deplibs_check_method" = pass_all || ++ { test "$build_libtool_libs" = yes && ++ test -n "$library_names"; }; }; then ++ # We only need to search for static libraries ++ continue ++ fi ++ fi ++ ++ link_static=no # Whether the deplib will be linked statically ++ use_static_libs=$prefer_static_libs ++ if test "$use_static_libs" = built && test "$installed" = yes ; then ++ use_static_libs=no ++ fi ++ if test -n "$library_names" && ++ { test "$use_static_libs" = no || test -z "$old_library"; }; then ++ if test "$installed" = no; then ++ notinst_deplibs="$notinst_deplibs $lib" ++ need_relink=yes ++ fi ++ # This is a shared library ++ ++ # Warn about portability, can't link against -module's on ++ # some systems (darwin) ++ if test "$shouldnotlink" = yes && test "$pass" = link ; then ++ $echo ++ if test "$linkmode" = prog; then ++ $echo "*** Warning: Linking the executable $output against the loadable module" ++ else ++ $echo "*** Warning: Linking the shared library $output against the loadable module" ++ fi ++ $echo "*** $linklib is not portable!" ++ fi ++ if test "$linkmode" = lib && ++ test "$hardcode_into_libs" = yes; then ++ # Hardcode the library path. ++ # Skip directories that are in the system default run-time ++ # search path. ++ case " $sys_lib_dlsearch_path " in ++ *" $absdir "*) ;; ++ *) ++ case "$compile_rpath " in ++ *" $absdir "*) ;; ++ *) compile_rpath="$compile_rpath $absdir" ++ esac ++ ;; ++ esac ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ++ esac ++ ;; ++ esac ++ fi ++ ++ if test -n "$old_archive_from_expsyms_cmds"; then ++ # figure out the soname ++ set dummy $library_names ++ realname="$2" ++ shift; shift ++ libname=`eval \\$echo \"$libname_spec\"` ++ # use dlname if we got it. it's perfectly good, no? ++ if test -n "$dlname"; then ++ soname="$dlname" ++ elif test -n "$soname_spec"; then ++ # bleh windows ++ case $host in ++ *cygwin* | mingw*) ++ major=`expr $current - $age` ++ versuffix="-$major" ++ ;; ++ esac ++ eval soname=\"$soname_spec\" ++ else ++ soname="$realname" ++ fi ++ ++ # Make a new name for the extract_expsyms_cmds to use ++ soroot="$soname" ++ soname=`$echo $soroot | ${SED} -e 's/^.*\///'` ++ newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" ++ ++ # If the library has no export list, then create one now ++ if test -f "$output_objdir/$soname-def"; then : ++ else ++ $show "extracting exported symbol list from \`$soname'" ++ save_ifs="$IFS"; IFS='~' ++ cmds=$extract_expsyms_cmds ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $show "$cmd" ++ $run eval "$cmd" || exit $? ++ done ++ IFS="$save_ifs" ++ fi ++ ++ # Create $newlib ++ if test -f "$output_objdir/$newlib"; then :; else ++ $show "generating import library for \`$soname'" ++ save_ifs="$IFS"; IFS='~' ++ cmds=$old_archive_from_expsyms_cmds ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $show "$cmd" ++ $run eval "$cmd" || exit $? ++ done ++ IFS="$save_ifs" ++ fi ++ # make sure the library variables are pointing to the new library ++ dir=$output_objdir ++ linklib=$newlib ++ fi # test -n "$old_archive_from_expsyms_cmds" ++ ++ if test "$linkmode" = prog || test "$mode" != relink; then ++ add_shlibpath= ++ add_dir= ++ add= ++ lib_linked=yes ++ case $hardcode_action in ++ immediate | unsupported) ++ if test "$hardcode_direct" = no; then ++ add="$dir/$linklib" ++ case $host in ++ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; ++ *-*-sysv4*uw2*) add_dir="-L$dir" ;; ++ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ ++ *-*-unixware7*) add_dir="-L$dir" ;; ++ *-*-darwin* ) ++ # if the lib is a module then we can not link against ++ # it, someone is ignoring the new warnings I added ++ if /usr/bin/file -L $add 2> /dev/null | ++ $EGREP ": [^:]* bundle" >/dev/null ; then ++ $echo "** Warning, lib $linklib is a module, not a shared library" ++ if test -z "$old_library" ; then ++ $echo ++ $echo "** And there doesn't seem to be a static archive available" ++ $echo "** The link will probably fail, sorry" ++ else ++ add="$dir/$old_library" ++ fi ++ fi ++ esac ++ elif test "$hardcode_minus_L" = no; then ++ case $host in ++ *-*-sunos*) add_shlibpath="$dir" ;; ++ esac ++ add_dir="-L$dir" ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = no; then ++ add_shlibpath="$dir" ++ add="-l$name" ++ else ++ lib_linked=no ++ fi ++ ;; ++ relink) ++ if test "$hardcode_direct" = yes; then ++ add="$dir/$linklib" ++ elif test "$hardcode_minus_L" = yes; then ++ add_dir="-L$dir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; ++ esac ++ fi ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = yes; then ++ add_shlibpath="$dir" ++ add="-l$name" ++ else ++ lib_linked=no ++ fi ++ ;; ++ *) lib_linked=no ;; ++ esac ++ ++ if test "$lib_linked" != yes; then ++ $echo "$modename: configuration error: unsupported hardcode properties" ++ exit $EXIT_FAILURE ++ fi ++ ++ if test -n "$add_shlibpath"; then ++ case :$compile_shlibpath: in ++ *":$add_shlibpath:"*) ;; ++ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; ++ esac ++ fi ++ if test "$linkmode" = prog; then ++ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" ++ test -n "$add" && compile_deplibs="$add $compile_deplibs" ++ else ++ test -n "$add_dir" && deplibs="$add_dir $deplibs" ++ test -n "$add" && deplibs="$add $deplibs" ++ if test "$hardcode_direct" != yes && \ ++ test "$hardcode_minus_L" != yes && \ ++ test "$hardcode_shlibpath_var" = yes; then ++ case :$finalize_shlibpath: in ++ *":$libdir:"*) ;; ++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; ++ esac ++ fi ++ fi ++ fi ++ ++ if test "$linkmode" = prog || test "$mode" = relink; then ++ add_shlibpath= ++ add_dir= ++ add= ++ # Finalize command for both is simple: just hardcode it. ++ if test "$hardcode_direct" = yes; then ++ add="$libdir/$linklib" ++ elif test "$hardcode_minus_L" = yes; then ++ add_dir="-L$libdir" ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = yes; then ++ case :$finalize_shlibpath: in ++ *":$libdir:"*) ;; ++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; ++ esac ++ add="-l$name" ++ elif test "$hardcode_automatic" = yes; then ++ if test -n "$inst_prefix_dir" && ++ test -f "$inst_prefix_dir$libdir/$linklib" ; then ++ add="$inst_prefix_dir$libdir/$linklib" ++ else ++ add="$libdir/$linklib" ++ fi ++ else ++ # We cannot seem to hardcode it, guess we'll fake it. ++ add_dir="-L$libdir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; ++ esac ++ fi ++ add="-l$name" ++ fi ++ ++ if test "$linkmode" = prog; then ++ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" ++ test -n "$add" && finalize_deplibs="$add $finalize_deplibs" ++ else ++ test -n "$add_dir" && deplibs="$add_dir $deplibs" ++ test -n "$add" && deplibs="$add $deplibs" ++ fi ++ fi ++ elif test "$linkmode" = prog; then ++ # Here we assume that one of hardcode_direct or hardcode_minus_L ++ # is not unsupported. This is valid on all known static and ++ # shared platforms. ++ if test "$hardcode_direct" != unsupported; then ++ test -n "$old_library" && linklib="$old_library" ++ compile_deplibs="$dir/$linklib $compile_deplibs" ++ finalize_deplibs="$dir/$linklib $finalize_deplibs" ++ else ++ compile_deplibs="-l$name -L$dir $compile_deplibs" ++ finalize_deplibs="-l$name -L$dir $finalize_deplibs" ++ fi ++ elif test "$build_libtool_libs" = yes; then ++ # Not a shared library ++ if test "$deplibs_check_method" != pass_all; then ++ # We're trying link a shared library against a static one ++ # but the system doesn't support it. ++ ++ # Just print a warning and add the library to dependency_libs so ++ # that the program can be linked against the static library. ++ $echo ++ $echo "*** Warning: This system can not link to static lib archive $lib." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have." ++ if test "$module" = yes; then ++ $echo "*** But as you try to build a module library, libtool will still create " ++ $echo "*** a static module, that should work as long as the dlopening application" ++ $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." ++ if test -z "$global_symbol_pipe"; then ++ $echo ++ $echo "*** However, this would only work if libtool was able to extract symbol" ++ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $echo "*** not find such a program. So, this module is probably useless." ++ $echo "*** \`nm' from GNU binutils and a full rebuild may help." ++ fi ++ if test "$build_old_libs" = no; then ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ fi ++ else ++ deplibs="$dir/$old_library $deplibs" ++ link_static=yes ++ fi ++ fi # link shared/static library? ++ ++ if test "$linkmode" = lib; then ++ if test -n "$dependency_libs" && ++ { test "$hardcode_into_libs" != yes || ++ test "$build_old_libs" = yes || ++ test "$link_static" = yes; }; then ++ # Extract -R from dependency_libs ++ temp_deplibs= ++ for libdir in $dependency_libs; do ++ case $libdir in ++ -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` ++ case " $xrpath " in ++ *" $temp_xrpath "*) ;; ++ *) xrpath="$xrpath $temp_xrpath";; ++ esac;; ++ *) temp_deplibs="$temp_deplibs $libdir";; ++ esac ++ done ++ dependency_libs="$temp_deplibs" ++ fi ++ ++ newlib_search_path="$newlib_search_path $absdir" ++ # Link against this library ++ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" ++ # ... and its dependency_libs ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ newdependency_libs="$deplib $newdependency_libs" ++ if test "X$duplicate_deps" = "Xyes" ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ tmp_libs="$tmp_libs $deplib" ++ done ++ ++ if test "$link_all_deplibs" != no; then ++ # Add the search paths of all dependency libraries ++ for deplib in $dependency_libs; do ++ case $deplib in ++ -L*) path="$deplib" ;; ++ *.la) ++ dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` ++ test "X$dir" = "X$deplib" && dir="." ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; ++ *) ++ absdir=`cd "$dir" && pwd` ++ if test -z "$absdir"; then ++ $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 ++ absdir="$dir" ++ fi ++ ;; ++ esac ++ if grep "^installed=no" $deplib > /dev/null; then ++ path="$absdir/$objdir" ++ else ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` ++ if test -z "$libdir"; then ++ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ if test "$absdir" != "$libdir"; then ++ $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 ++ fi ++ path="$absdir" ++ fi ++ depdepl= ++ case $host in ++ *-*-darwin*) ++ # we do not want to link against static libs, ++ # but need to link against shared ++ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` ++ if test -n "$deplibrary_names" ; then ++ for tmp in $deplibrary_names ; do ++ depdepl=$tmp ++ done ++ if test -f "$path/$depdepl" ; then ++ depdepl="$path/$depdepl" ++ fi ++ # do not add paths which are already there ++ case " $newlib_search_path " in ++ *" $path "*) ;; ++ *) newlib_search_path="$newlib_search_path $path";; ++ esac ++ fi ++ path="" ++ ;; ++ *) ++ path="-L$path" ++ ;; ++ esac ++ ;; ++ -l*) ++ case $host in ++ *-*-darwin*) ++ # Again, we only want to link against shared libraries ++ eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` ++ for tmp in $newlib_search_path ; do ++ if test -f "$tmp/lib$tmp_libs.dylib" ; then ++ eval depdepl="$tmp/lib$tmp_libs.dylib" ++ break ++ fi ++ done ++ path="" ++ ;; ++ *) continue ;; ++ esac ++ ;; ++ *) continue ;; ++ esac ++ case " $deplibs " in ++ *" $path "*) ;; ++ *) deplibs="$path $deplibs" ;; ++ esac ++ case " $deplibs " in ++ *" $depdepl "*) ;; ++ *) deplibs="$depdepl $deplibs" ;; ++ esac ++ done ++ fi # link_all_deplibs != no ++ fi # linkmode = lib ++ done # for deplib in $libs ++ dependency_libs="$newdependency_libs" ++ if test "$pass" = dlpreopen; then ++ # Link the dlpreopened libraries before other libraries ++ for deplib in $save_deplibs; do ++ deplibs="$deplib $deplibs" ++ done ++ fi ++ if test "$pass" != dlopen; then ++ if test "$pass" != conv; then ++ # Make sure lib_search_path contains only unique directories. ++ lib_search_path= ++ for dir in $newlib_search_path; do ++ case "$lib_search_path " in ++ *" $dir "*) ;; ++ *) lib_search_path="$lib_search_path $dir" ;; ++ esac ++ done ++ newlib_search_path= ++ fi ++ ++ if test "$linkmode,$pass" != "prog,link"; then ++ vars="deplibs" ++ else ++ vars="compile_deplibs finalize_deplibs" ++ fi ++ for var in $vars dependency_libs; do ++ # Add libraries to $var in reverse order ++ eval tmp_libs=\"\$$var\" ++ new_libs= ++ for deplib in $tmp_libs; do ++ # FIXME: Pedantically, this is the right thing to do, so ++ # that some nasty dependency loop isn't accidentally ++ # broken: ++ #new_libs="$deplib $new_libs" ++ # Pragmatically, this seems to cause very few problems in ++ # practice: ++ case $deplib in ++ -L*) new_libs="$deplib $new_libs" ;; ++ -R*) ;; ++ *) ++ # And here is the reason: when a library appears more ++ # than once as an explicit dependence of a library, or ++ # is implicitly linked in more than once by the ++ # compiler, it is considered special, and multiple ++ # occurrences thereof are not removed. Compare this ++ # with having the same library being listed as a ++ # dependency of multiple other libraries: in this case, ++ # we know (pedantically, we assume) the library does not ++ # need to be listed more than once, so we keep only the ++ # last copy. This is not always right, but it is rare ++ # enough that we require users that really mean to play ++ # such unportable linking tricks to link the library ++ # using -Wl,-lname, so that libtool does not consider it ++ # for duplicate removal. ++ case " $specialdeplibs " in ++ *" $deplib "*) new_libs="$deplib $new_libs" ;; ++ *) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$deplib $new_libs" ;; ++ esac ++ ;; ++ esac ++ ;; ++ esac ++ done ++ tmp_libs= ++ for deplib in $new_libs; do ++ case $deplib in ++ -L*) ++ case " $tmp_libs " in ++ *" $deplib "*) ;; ++ *) tmp_libs="$tmp_libs $deplib" ;; ++ esac ++ ;; ++ *) tmp_libs="$tmp_libs $deplib" ;; ++ esac ++ done ++ eval $var=\"$tmp_libs\" ++ done # for var ++ fi ++ # Last step: remove runtime libs from dependency_libs ++ # (they stay in deplibs) ++ tmp_libs= ++ for i in $dependency_libs ; do ++ case " $predeps $postdeps $compiler_lib_search_path " in ++ *" $i "*) ++ i="" ++ ;; ++ esac ++ if test -n "$i" ; then ++ tmp_libs="$tmp_libs $i" ++ fi ++ done ++ dependency_libs=$tmp_libs ++ done # for pass ++ if test "$linkmode" = prog; then ++ dlfiles="$newdlfiles" ++ dlprefiles="$newdlprefiles" ++ fi ++ ++ case $linkmode in ++ oldlib) ++ if test -n "$deplibs"; then ++ $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ++ fi ++ ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 ++ fi ++ ++ if test -n "$rpath"; then ++ $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 ++ fi ++ ++ if test -n "$xrpath"; then ++ $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 ++ fi ++ ++ if test -n "$vinfo"; then ++ $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 ++ fi ++ ++ if test -n "$release"; then ++ $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 ++ fi ++ ++ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then ++ $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 ++ fi ++ ++ # Now set the variables for building old libraries. ++ build_libtool_libs=no ++ oldlibs="$output" ++ objs="$objs$old_deplibs" ++ ;; ++ ++ lib) ++ # Make sure we only generate libraries of the form `libNAME.la'. ++ case $outputname in ++ lib*) ++ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" ++ ;; ++ *) ++ if test "$module" = no; then ++ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ if test "$need_lib_prefix" != no; then ++ # Add the "lib" prefix for modules if required ++ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" ++ else ++ libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` ++ fi ++ ;; ++ esac ++ ++ if test -n "$objs"; then ++ if test "$deplibs_check_method" != pass_all; then ++ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 ++ exit $EXIT_FAILURE ++ else ++ $echo ++ $echo "*** Warning: Linking the shared library $output against the non-libtool" ++ $echo "*** objects $objs is not portable!" ++ libobjs="$libobjs $objs" ++ fi ++ fi ++ ++ if test "$dlself" != no; then ++ $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 ++ fi ++ ++ set dummy $rpath ++ if test "$#" -gt 2; then ++ $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 ++ fi ++ install_libdir="$2" ++ ++ oldlibs= ++ if test -z "$rpath"; then ++ if test "$build_libtool_libs" = yes; then ++ # Building a libtool convenience library. ++ # Some compilers have problems with a `.al' extension so ++ # convenience libraries should have the same extension an ++ # archive normally would. ++ oldlibs="$output_objdir/$libname.$libext $oldlibs" ++ build_libtool_libs=convenience ++ build_old_libs=yes ++ fi ++ ++ if test -n "$vinfo"; then ++ $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 ++ fi ++ ++ if test -n "$release"; then ++ $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 ++ fi ++ else ++ ++ # Parse the version information argument. ++ save_ifs="$IFS"; IFS=':' ++ set dummy $vinfo 0 0 0 ++ IFS="$save_ifs" ++ ++ if test -n "$8"; then ++ $echo "$modename: too many parameters to \`-version-info'" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # convert absolute version numbers to libtool ages ++ # this retains compatibility with .la files and attempts ++ # to make the code below a bit more comprehensible ++ ++ case $vinfo_number in ++ yes) ++ number_major="$2" ++ number_minor="$3" ++ number_revision="$4" ++ # ++ # There are really only two kinds -- those that ++ # use the current revision as the major version ++ # and those that subtract age and use age as ++ # a minor version. But, then there is irix ++ # which has an extra 1 added just for fun ++ # ++ case $version_type in ++ darwin|linux|osf|windows) ++ current=`expr $number_major + $number_minor` ++ age="$number_minor" ++ revision="$number_revision" ++ ;; ++ freebsd-aout|freebsd-elf|sunos) ++ current="$number_major" ++ revision="$number_minor" ++ age="0" ++ ;; ++ irix|nonstopux) ++ current=`expr $number_major + $number_minor - 1` ++ age="$number_minor" ++ revision="$number_minor" ++ ;; ++ esac ++ ;; ++ no) ++ current="$2" ++ revision="$3" ++ age="$4" ++ ;; ++ esac ++ ++ # Check that each of the things are valid numbers. ++ case $current in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 ++ $echo "$modename: \`$vinfo' is not valid version information" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ ++ case $revision in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 ++ $echo "$modename: \`$vinfo' is not valid version information" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ ++ case $age in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 ++ $echo "$modename: \`$vinfo' is not valid version information" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ ++ if test "$age" -gt "$current"; then ++ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 ++ $echo "$modename: \`$vinfo' is not valid version information" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Calculate the version variables. ++ major= ++ versuffix= ++ verstring= ++ case $version_type in ++ none) ;; ++ ++ darwin) ++ # Like Linux, but with the current version available in ++ # verstring for coding it into the library header ++ major=.`expr $current - $age` ++ versuffix="$major.$age.$revision" ++ # Darwin ld doesn't like 0 for these options... ++ minor_current=`expr $current + 1` ++ verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" ++ ;; ++ ++ freebsd-aout) ++ major=".$current" ++ versuffix=".$current.$revision"; ++ ;; ++ ++ freebsd-elf) ++ major=".$current" ++ versuffix=".$current"; ++ ;; ++ ++ irix | nonstopux) ++ major=`expr $current - $age + 1` ++ ++ case $version_type in ++ nonstopux) verstring_prefix=nonstopux ;; ++ *) verstring_prefix=sgi ;; ++ esac ++ verstring="$verstring_prefix$major.$revision" ++ ++ # Add in all the interfaces that we are compatible with. ++ loop=$revision ++ while test "$loop" -ne 0; do ++ iface=`expr $revision - $loop` ++ loop=`expr $loop - 1` ++ verstring="$verstring_prefix$major.$iface:$verstring" ++ done ++ ++ # Before this point, $major must not contain `.'. ++ major=.$major ++ versuffix="$major.$revision" ++ ;; ++ ++ linux) ++ major=.`expr $current - $age` ++ versuffix="$major.$age.$revision" ++ ;; ++ ++ osf) ++ major=.`expr $current - $age` ++ versuffix=".$current.$age.$revision" ++ verstring="$current.$age.$revision" ++ ++ # Add in all the interfaces that we are compatible with. ++ loop=$age ++ while test "$loop" -ne 0; do ++ iface=`expr $current - $loop` ++ loop=`expr $loop - 1` ++ verstring="$verstring:${iface}.0" ++ done ++ ++ # Make executables depend on our current version. ++ verstring="$verstring:${current}.0" ++ ;; ++ ++ sunos) ++ major=".$current" ++ versuffix=".$current.$revision" ++ ;; ++ ++ windows) ++ # Use '-' rather than '.', since we only want one ++ # extension on DOS 8.3 filesystems. ++ major=`expr $current - $age` ++ versuffix="-$major" ++ ;; ++ ++ *) ++ $echo "$modename: unknown library version type \`$version_type'" 1>&2 ++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ ++ # Clear the version info if we defaulted, and they specified a release. ++ if test -z "$vinfo" && test -n "$release"; then ++ major= ++ case $version_type in ++ darwin) ++ # we can't check for "0.0" in archive_cmds due to quoting ++ # problems, so we reset it completely ++ verstring= ++ ;; ++ *) ++ verstring="0.0" ++ ;; ++ esac ++ if test "$need_version" = no; then ++ versuffix= ++ else ++ versuffix=".0.0" ++ fi ++ fi ++ ++ # Remove version info from name if versioning should be avoided ++ if test "$avoid_version" = yes && test "$need_version" = no; then ++ major= ++ versuffix= ++ verstring="" ++ fi ++ ++ # Check to see if the archive will have undefined symbols. ++ if test "$allow_undefined" = yes; then ++ if test "$allow_undefined_flag" = unsupported; then ++ $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 ++ build_libtool_libs=no ++ build_old_libs=yes ++ fi ++ else ++ # Don't allow undefined symbols. ++ allow_undefined_flag="$no_undefined_flag" ++ fi ++ fi ++ ++ if test "$mode" != relink; then ++ # Remove our outputs, but don't remove object files since they ++ # may have been created when compiling PIC objects. ++ removelist= ++ tempremovelist=`$echo "$output_objdir/*"` ++ for p in $tempremovelist; do ++ case $p in ++ *.$objext) ++ ;; ++ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) ++ if test "X$precious_files_regex" != "X"; then ++ if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 ++ then ++ continue ++ fi ++ fi ++ removelist="$removelist $p" ++ ;; ++ *) ;; ++ esac ++ done ++ if test -n "$removelist"; then ++ $show "${rm}r $removelist" ++ $run ${rm}r $removelist ++ fi ++ fi ++ ++ # Now set the variables for building old libraries. ++ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then ++ oldlibs="$oldlibs $output_objdir/$libname.$libext" ++ ++ # Transform .lo files to .o files. ++ oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` ++ fi ++ ++ # Eliminate all temporary directories. ++ for path in $notinst_path; do ++ lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` ++ deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` ++ dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` ++ done ++ ++ if test -n "$xrpath"; then ++ # If the user specified any rpath flags, then add them. ++ temp_xrpath= ++ for libdir in $xrpath; do ++ temp_xrpath="$temp_xrpath -R$libdir" ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ;; ++ esac ++ done ++ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then ++ dependency_libs="$temp_xrpath $dependency_libs" ++ fi ++ fi ++ ++ # Make sure dlfiles contains only unique files that won't be dlpreopened ++ old_dlfiles="$dlfiles" ++ dlfiles= ++ for lib in $old_dlfiles; do ++ case " $dlprefiles $dlfiles " in ++ *" $lib "*) ;; ++ *) dlfiles="$dlfiles $lib" ;; ++ esac ++ done ++ ++ # Make sure dlprefiles contains only unique files ++ old_dlprefiles="$dlprefiles" ++ dlprefiles= ++ for lib in $old_dlprefiles; do ++ case "$dlprefiles " in ++ *" $lib "*) ;; ++ *) dlprefiles="$dlprefiles $lib" ;; ++ esac ++ done ++ ++ if test "$build_libtool_libs" = yes; then ++ if test -n "$rpath"; then ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) ++ # these systems don't actually have a c library (as such)! ++ ;; ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # Rhapsody C library is in the System framework ++ deplibs="$deplibs -framework System" ++ ;; ++ *-*-netbsd*) ++ # Don't link with libc until the a.out ld.so is fixed. ++ ;; ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc due to us having libc/libc_r. ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ ;; ++ *) ++ # Add libc to deplibs on all other systems if necessary. ++ if test "$build_libtool_need_lc" = "yes"; then ++ deplibs="$deplibs -lc" ++ fi ++ ;; ++ esac ++ fi ++ ++ # Transform deplibs into only deplibs that can be linked in shared. ++ name_save=$name ++ libname_save=$libname ++ release_save=$release ++ versuffix_save=$versuffix ++ major_save=$major ++ # I'm not sure if I'm treating the release correctly. I think ++ # release should show up in the -l (ie -lgmp5) so we don't want to ++ # add it in twice. Is that correct? ++ release="" ++ versuffix="" ++ major="" ++ newdeplibs= ++ droppeddeps=no ++ case $deplibs_check_method in ++ pass_all) ++ # Don't check for shared/static. Everything works. ++ # This might be a little naive. We might want to check ++ # whether the library exists or not. But this is on ++ # osf3 & osf4 and I'm not really sure... Just ++ # implementing what was already the behavior. ++ newdeplibs=$deplibs ++ ;; ++ test_compile) ++ # This code stresses the "libraries are programs" paradigm to its ++ # limits. Maybe even breaks it. We compile a program, linking it ++ # against the deplibs as a proxy for the library. Then we can check ++ # whether they linked in statically or dynamically with ldd. ++ $rm conftest.c ++ cat > conftest.c </dev/null` ++ for potent_lib in $potential_libs; do ++ # Follow soft links. ++ if ls -lLd "$potent_lib" 2>/dev/null \ ++ | grep " -> " >/dev/null; then ++ continue ++ fi ++ # The statement above tries to avoid entering an ++ # endless loop below, in case of cyclic links. ++ # We might still enter an endless loop, since a link ++ # loop can be closed while we follow links, ++ # but so what? ++ potlib="$potent_lib" ++ while test -h "$potlib" 2>/dev/null; do ++ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` ++ case $potliblink in ++ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; ++ *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; ++ esac ++ done ++ # It is ok to link against an archive when ++ # building a shared library. ++ if $AR -t $potlib > /dev/null 2>&1; then ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ ++ | ${SED} 10q \ ++ | $EGREP "$file_magic_regex" > /dev/null; then ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done ++ done ++ fi ++ if test -n "$a_deplib" ; then ++ droppeddeps=yes ++ $echo ++ $echo "*** Warning: linker path does not have real file for library $a_deplib." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have" ++ $echo "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $echo "*** with $libname but no candidates were found. (...for file magic test)" ++ else ++ $echo "*** with $libname and none of the candidates passed a file format test" ++ $echo "*** using a file magic. Last file checked: $potlib" ++ fi ++ fi ++ else ++ # Add a -L argument. ++ newdeplibs="$newdeplibs $a_deplib" ++ fi ++ done # Gone through all deplibs. ++ ;; ++ match_pattern*) ++ set dummy $deplibs_check_method ++ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` ++ for a_deplib in $deplibs; do ++ name=`expr $a_deplib : '-l\(.*\)'` ++ # If $name is empty we are operating on a -L argument. ++ if test -n "$name" && test "$name" != "0"; then ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $a_deplib "*) ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ ;; ++ esac ++ fi ++ if test -n "$a_deplib" ; then ++ libname=`eval \\$echo \"$libname_spec\"` ++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` ++ for potent_lib in $potential_libs; do ++ potlib="$potent_lib" # see symlink-check above in file_magic test ++ if eval $echo \"$potent_lib\" 2>/dev/null \ ++ | ${SED} 10q \ ++ | $EGREP "$match_pattern_regex" > /dev/null; then ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done ++ done ++ fi ++ if test -n "$a_deplib" ; then ++ droppeddeps=yes ++ $echo ++ $echo "*** Warning: linker path does not have real file for library $a_deplib." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have" ++ $echo "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $echo "*** with $libname but no candidates were found. (...for regex pattern test)" ++ else ++ $echo "*** with $libname and none of the candidates passed a file format test" ++ $echo "*** using a regex pattern. Last file checked: $potlib" ++ fi ++ fi ++ else ++ # Add a -L argument. ++ newdeplibs="$newdeplibs $a_deplib" ++ fi ++ done # Gone through all deplibs. ++ ;; ++ none | unknown | *) ++ newdeplibs="" ++ tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ ++ -e 's/ -[LR][^ ]*//g'` ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ for i in $predeps $postdeps ; do ++ # can't use Xsed below, because $i might contain '/' ++ tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` ++ done ++ fi ++ if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ ++ | grep . >/dev/null; then ++ $echo ++ if test "X$deplibs_check_method" = "Xnone"; then ++ $echo "*** Warning: inter-library dependencies are not supported in this platform." ++ else ++ $echo "*** Warning: inter-library dependencies are not known to be supported." ++ fi ++ $echo "*** All declared inter-library dependencies are being dropped." ++ droppeddeps=yes ++ fi ++ ;; ++ esac ++ versuffix=$versuffix_save ++ major=$major_save ++ release=$release_save ++ libname=$libname_save ++ name=$name_save ++ ++ case $host in ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # On Rhapsody replace the C library is the System framework ++ newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` ++ ;; ++ esac ++ ++ if test "$droppeddeps" = yes; then ++ if test "$module" = yes; then ++ $echo ++ $echo "*** Warning: libtool could not satisfy all declared inter-library" ++ $echo "*** dependencies of module $libname. Therefore, libtool will create" ++ $echo "*** a static module, that should work as long as the dlopening" ++ $echo "*** application is linked with the -dlopen flag." ++ if test -z "$global_symbol_pipe"; then ++ $echo ++ $echo "*** However, this would only work if libtool was able to extract symbol" ++ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $echo "*** not find such a program. So, this module is probably useless." ++ $echo "*** \`nm' from GNU binutils and a full rebuild may help." ++ fi ++ if test "$build_old_libs" = no; then ++ oldlibs="$output_objdir/$libname.$libext" ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ else ++ $echo "*** The inter-library dependencies that have been dropped here will be" ++ $echo "*** automatically added whenever a program is linked with this library" ++ $echo "*** or is declared to -dlopen it." ++ ++ if test "$allow_undefined" = no; then ++ $echo ++ $echo "*** Since this library must not contain undefined symbols," ++ $echo "*** because either the platform does not support them or" ++ $echo "*** it was explicitly requested with -no-undefined," ++ $echo "*** libtool will only create a static version of it." ++ if test "$build_old_libs" = no; then ++ oldlibs="$output_objdir/$libname.$libext" ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ fi ++ fi ++ fi ++ # Done checking deplibs! ++ deplibs=$newdeplibs ++ fi ++ ++ ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; ++ esac ++ ;; ++ esac ++ done ++ for deplib in $deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ deplibs="$new_libs" ++ ++ ++ # All the library-specific variables (install_libdir is set above). ++ library_names= ++ old_library= ++ dlname= ++ ++ # Test again, we may have decided not to build it any more ++ if test "$build_libtool_libs" = yes; then ++ if test "$hardcode_into_libs" = yes; then ++ # Hardcode the library paths ++ hardcode_libdirs= ++ dep_rpath= ++ rpath="$finalize_rpath" ++ test "$mode" != relink && rpath="$compile_rpath$rpath" ++ for libdir in $rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi ++ else ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ dep_rpath="$dep_rpath $flag" ++ fi ++ elif test -n "$runpath_var"; then ++ case "$perm_rpath " in ++ *" $libdir "*) ;; ++ *) perm_rpath="$perm_rpath $libdir" ;; ++ esac ++ fi ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ if test -n "$hardcode_libdir_flag_spec_ld"; then ++ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ++ else ++ eval dep_rpath=\"$hardcode_libdir_flag_spec\" ++ fi ++ fi ++ if test -n "$runpath_var" && test -n "$perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" ++ fi ++ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" ++ fi ++ ++ shlibpath="$finalize_shlibpath" ++ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" ++ if test -n "$shlibpath"; then ++ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" ++ fi ++ ++ # Get the real and link names of the library. ++ eval shared_ext=\"$shrext_cmds\" ++ eval library_names=\"$library_names_spec\" ++ set dummy $library_names ++ realname="$2" ++ shift; shift ++ ++ if test -n "$soname_spec"; then ++ eval soname=\"$soname_spec\" ++ else ++ soname="$realname" ++ fi ++ if test -z "$dlname"; then ++ dlname=$soname ++ fi ++ ++ lib="$output_objdir/$realname" ++ linknames= ++ for link ++ do ++ linknames="$linknames $link" ++ done ++ ++ # Use standard objects if they are pic ++ test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ ++ # Prepare the list of exported symbols ++ if test -z "$export_symbols"; then ++ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then ++ $show "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $run $rm $export_symbols ++ cmds=$export_symbols_cmds ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ if len=`expr "X$cmd" : ".*"` && ++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ $show "$cmd" ++ $run eval "$cmd" || exit $? ++ skipped_export=false ++ else ++ # The command line is too long to execute in one step. ++ $show "using reloadable object file for export list..." ++ skipped_export=: ++ # Break out early, otherwise skipped_export may be ++ # set to false by a later but shorter cmd. ++ break ++ fi ++ done ++ IFS="$save_ifs" ++ if test -n "$export_symbols_regex"; then ++ $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" ++ $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' ++ $show "$mv \"${export_symbols}T\" \"$export_symbols\"" ++ $run eval '$mv "${export_symbols}T" "$export_symbols"' ++ fi ++ fi ++ fi ++ ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' ++ fi ++ ++ tmp_deplibs= ++ for test_deplib in $deplibs; do ++ case " $convenience " in ++ *" $test_deplib "*) ;; ++ *) ++ tmp_deplibs="$tmp_deplibs $test_deplib" ++ ;; ++ esac ++ done ++ deplibs="$tmp_deplibs" ++ ++ if test -n "$convenience"; then ++ if test -n "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ else ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" ++ ++ func_extract_archives $gentop $convenience ++ libobjs="$libobjs $func_extract_archives_result" ++ fi ++ fi ++ ++ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then ++ eval flag=\"$thread_safe_flag_spec\" ++ linker_flags="$linker_flags $flag" ++ fi ++ ++ # Make a backup of the uninstalled library when relinking ++ if test "$mode" = relink; then ++ $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? ++ fi ++ ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ eval test_cmds=\"$module_expsym_cmds\" ++ cmds=$module_expsym_cmds ++ else ++ eval test_cmds=\"$module_cmds\" ++ cmds=$module_cmds ++ fi ++ else ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ eval test_cmds=\"$archive_expsym_cmds\" ++ cmds=$archive_expsym_cmds ++ else ++ eval test_cmds=\"$archive_cmds\" ++ cmds=$archive_cmds ++ fi ++ fi ++ ++ if test "X$skipped_export" != "X:" && ++ len=`expr "X$test_cmds" : ".*" 2>/dev/null` && ++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ : ++ else ++ # The command line is too long to link in one step, link piecewise. ++ $echo "creating reloadable object files..." ++ ++ # Save the value of $output and $libobjs because we want to ++ # use them later. If we have whole_archive_flag_spec, we ++ # want to use save_libobjs as it was before ++ # whole_archive_flag_spec was expanded, because we can't ++ # assume the linker understands whole_archive_flag_spec. ++ # This may have to be revisited, in case too many ++ # convenience libraries get linked in and end up exceeding ++ # the spec. ++ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ fi ++ save_output=$output ++ output_la=`$echo "X$output" | $Xsed -e "$basename"` ++ ++ # Clear the reloadable object creation command queue and ++ # initialize k to one. ++ test_cmds= ++ concat_cmds= ++ objlist= ++ delfiles= ++ last_robj= ++ k=1 ++ output=$output_objdir/$output_la-${k}.$objext ++ # Loop over the list of objects to be linked. ++ for obj in $save_libobjs ++ do ++ eval test_cmds=\"$reload_cmds $objlist $last_robj\" ++ if test "X$objlist" = X || ++ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && ++ test "$len" -le "$max_cmd_len"; }; then ++ objlist="$objlist $obj" ++ else ++ # The command $test_cmds is almost too long, add a ++ # command to the queue. ++ if test "$k" -eq 1 ; then ++ # The first file doesn't have a previous command to add. ++ eval concat_cmds=\"$reload_cmds $objlist $last_robj\" ++ else ++ # All subsequent reloadable object files will link in ++ # the last one created. ++ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" ++ fi ++ last_robj=$output_objdir/$output_la-${k}.$objext ++ k=`expr $k + 1` ++ output=$output_objdir/$output_la-${k}.$objext ++ objlist=$obj ++ len=1 ++ fi ++ done ++ # Handle the remaining objects by creating one last ++ # reloadable object file. All subsequent reloadable object ++ # files will link in the last one created. ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" ++ ++ if ${skipped_export-false}; then ++ $show "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $run $rm $export_symbols ++ libobjs=$output ++ # Append the command to create the export file. ++ eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" ++ fi ++ ++ # Set up a command to remove the reloadable object files ++ # after they are used. ++ i=0 ++ while test "$i" -lt "$k" ++ do ++ i=`expr $i + 1` ++ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" ++ done ++ ++ $echo "creating a temporary reloadable object file: $output" ++ ++ # Loop through the commands generated above and execute them. ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $concat_cmds; do ++ IFS="$save_ifs" ++ $show "$cmd" ++ $run eval "$cmd" || exit $? ++ done ++ IFS="$save_ifs" ++ ++ libobjs=$output ++ # Restore the value of output. ++ output=$save_output ++ ++ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ fi ++ # Expand the library linking commands again to reset the ++ # value of $libobjs for piecewise linking. ++ ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ cmds=$module_expsym_cmds ++ else ++ cmds=$module_cmds ++ fi ++ else ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ cmds=$archive_expsym_cmds ++ else ++ cmds=$archive_cmds ++ fi ++ fi ++ ++ # Append the command to remove the reloadable object files ++ # to the just-reset $cmds. ++ eval cmds=\"\$cmds~\$rm $delfiles\" ++ fi ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $show "$cmd" ++ $run eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' ++ fi ++ ++ exit $lt_exit ++ } ++ done ++ IFS="$save_ifs" ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? ++ ++ if test -n "$convenience"; then ++ if test -z "$whole_archive_flag_spec"; then ++ $show "${rm}r $gentop" ++ $run ${rm}r "$gentop" ++ fi ++ fi ++ ++ exit $EXIT_SUCCESS ++ fi ++ ++ # Create links to the real library. ++ for linkname in $linknames; do ++ if test "$realname" != "$linkname"; then ++ $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" ++ $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? ++ fi ++ done ++ ++ # If -module or -export-dynamic was specified, set the dlname. ++ if test "$module" = yes || test "$export_dynamic" = yes; then ++ # On all known operating systems, these are identical. ++ dlname="$soname" ++ fi ++ fi ++ ;; ++ ++ obj) ++ if test -n "$deplibs"; then ++ $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ++ fi ++ ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 ++ fi ++ ++ if test -n "$rpath"; then ++ $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 ++ fi ++ ++ if test -n "$xrpath"; then ++ $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 ++ fi ++ ++ if test -n "$vinfo"; then ++ $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 ++ fi ++ ++ if test -n "$release"; then ++ $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 ++ fi ++ ++ case $output in ++ *.lo) ++ if test -n "$objs$old_deplibs"; then ++ $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ libobj="$output" ++ obj=`$echo "X$output" | $Xsed -e "$lo2o"` ++ ;; ++ *) ++ libobj= ++ obj="$output" ++ ;; ++ esac ++ ++ # Delete the old objects. ++ $run $rm $obj $libobj ++ ++ # Objects from convenience libraries. This assumes ++ # single-version convenience libraries. Whenever we create ++ # different ones for PIC/non-PIC, this we'll have to duplicate ++ # the extraction. ++ reload_conv_objs= ++ gentop= ++ # reload_cmds runs $LD directly, so let us get rid of ++ # -Wl from whole_archive_flag_spec ++ wl= ++ ++ if test -n "$convenience"; then ++ if test -n "$whole_archive_flag_spec"; then ++ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" ++ else ++ gentop="$output_objdir/${obj}x" ++ generated="$generated $gentop" ++ ++ func_extract_archives $gentop $convenience ++ reload_conv_objs="$reload_objs $func_extract_archives_result" ++ fi ++ fi ++ ++ # Create the old-style object. ++ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test ++ ++ output="$obj" ++ cmds=$reload_cmds ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $show "$cmd" ++ $run eval "$cmd" || exit $? ++ done ++ IFS="$save_ifs" ++ ++ # Exit if we aren't doing a library object file. ++ if test -z "$libobj"; then ++ if test -n "$gentop"; then ++ $show "${rm}r $gentop" ++ $run ${rm}r $gentop ++ fi ++ ++ exit $EXIT_SUCCESS ++ fi ++ ++ if test "$build_libtool_libs" != yes; then ++ if test -n "$gentop"; then ++ $show "${rm}r $gentop" ++ $run ${rm}r $gentop ++ fi ++ ++ # Create an invalid libtool object if no PIC, so that we don't ++ # accidentally link it into a program. ++ # $show "echo timestamp > $libobj" ++ # $run eval "echo timestamp > $libobj" || exit $? ++ exit $EXIT_SUCCESS ++ fi ++ ++ if test -n "$pic_flag" || test "$pic_mode" != default; then ++ # Only do commands if we really have different PIC objects. ++ reload_objs="$libobjs $reload_conv_objs" ++ output="$libobj" ++ cmds=$reload_cmds ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $show "$cmd" ++ $run eval "$cmd" || exit $? ++ done ++ IFS="$save_ifs" ++ fi ++ ++ if test -n "$gentop"; then ++ $show "${rm}r $gentop" ++ $run ${rm}r $gentop ++ fi ++ ++ exit $EXIT_SUCCESS ++ ;; ++ ++ prog) ++ case $host in ++ *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; ++ esac ++ if test -n "$vinfo"; then ++ $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 ++ fi ++ ++ if test -n "$release"; then ++ $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 ++ fi ++ ++ if test "$preload" = yes; then ++ if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && ++ test "$dlopen_self_static" = unknown; then ++ $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." ++ fi ++ fi ++ ++ case $host in ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # On Rhapsody replace the C library is the System framework ++ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` ++ finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` ++ ;; ++ esac ++ ++ case $host in ++ *darwin*) ++ # Don't allow lazy linking, it breaks C++ global constructors ++ if test "$tagname" = CXX ; then ++ compile_command="$compile_command ${wl}-bind_at_load" ++ finalize_command="$finalize_command ${wl}-bind_at_load" ++ fi ++ ;; ++ esac ++ ++ ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $compile_deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; ++ esac ++ ;; ++ esac ++ done ++ for deplib in $compile_deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ compile_deplibs="$new_libs" ++ ++ ++ compile_command="$compile_command $compile_deplibs" ++ finalize_command="$finalize_command $finalize_deplibs" ++ ++ if test -n "$rpath$xrpath"; then ++ # If the user specified any rpath flags, then add them. ++ for libdir in $rpath $xrpath; do ++ # This is the magic to use -rpath. ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ;; ++ esac ++ done ++ fi ++ ++ # Now hardcode the library paths ++ rpath= ++ hardcode_libdirs= ++ for libdir in $compile_rpath $finalize_rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi ++ else ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ rpath="$rpath $flag" ++ fi ++ elif test -n "$runpath_var"; then ++ case "$perm_rpath " in ++ *" $libdir "*) ;; ++ *) perm_rpath="$perm_rpath $libdir" ;; ++ esac ++ fi ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` ++ case :$dllsearchpath: in ++ *":$libdir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$libdir";; ++ esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac ++ ;; ++ esac ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ eval rpath=\" $hardcode_libdir_flag_spec\" ++ fi ++ compile_rpath="$rpath" ++ ++ rpath= ++ hardcode_libdirs= ++ for libdir in $finalize_rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi ++ else ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ rpath="$rpath $flag" ++ fi ++ elif test -n "$runpath_var"; then ++ case "$finalize_perm_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; ++ esac ++ fi ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ eval rpath=\" $hardcode_libdir_flag_spec\" ++ fi ++ finalize_rpath="$rpath" ++ ++ if test -n "$libobjs" && test "$build_old_libs" = yes; then ++ # Transform all the library objects into standard objects. ++ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ fi ++ ++ dlsyms= ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ if test -n "$NM" && test -n "$global_symbol_pipe"; then ++ dlsyms="${outputname}S.c" ++ else ++ $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 ++ fi ++ fi ++ ++ if test -n "$dlsyms"; then ++ case $dlsyms in ++ "") ;; ++ *.c) ++ # Discover the nlist of each of the dlfiles. ++ nlist="$output_objdir/${outputname}.nm" ++ ++ $show "$rm $nlist ${nlist}S ${nlist}T" ++ $run $rm "$nlist" "${nlist}S" "${nlist}T" ++ ++ # Parse the name list into a source file. ++ $show "creating $output_objdir/$dlsyms" ++ ++ test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ ++/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ ++/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ ++ ++#ifdef __cplusplus ++extern \"C\" { ++#endif ++ ++/* Prevent the only kind of declaration conflicts we can make. */ ++#define lt_preloaded_symbols some_other_symbol ++ ++/* External symbol declarations for the compiler. */\ ++" ++ ++ if test "$dlself" = yes; then ++ $show "generating symbol list for \`$output'" ++ ++ test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" ++ ++ # Add our own program objects to the symbol list. ++ progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ for arg in $progfiles; do ++ $show "extracting global C symbols from \`$arg'" ++ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" ++ done ++ ++ if test -n "$exclude_expsyms"; then ++ $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' ++ $run eval '$mv "$nlist"T "$nlist"' ++ fi ++ ++ if test -n "$export_symbols_regex"; then ++ $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' ++ $run eval '$mv "$nlist"T "$nlist"' ++ fi ++ ++ # Prepare the list of exported symbols ++ if test -z "$export_symbols"; then ++ export_symbols="$output_objdir/$outputname.exp" ++ $run $rm $export_symbols ++ $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' ++ case $host in ++ *cygwin* | *mingw* ) ++ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac ++ else ++ $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' ++ $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' ++ $run eval 'mv "$nlist"T "$nlist"' ++ case $host in ++ *cygwin* | *mingw* ) ++ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac ++ fi ++ fi ++ ++ for arg in $dlprefiles; do ++ $show "extracting global C symbols from \`$arg'" ++ name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` ++ $run eval '$echo ": $name " >> "$nlist"' ++ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" ++ done ++ ++ if test -z "$run"; then ++ # Make sure we have at least an empty file. ++ test -f "$nlist" || : > "$nlist" ++ ++ if test -n "$exclude_expsyms"; then ++ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T ++ $mv "$nlist"T "$nlist" ++ fi ++ ++ # Try sorting and uniquifying the output. ++ if grep -v "^: " < "$nlist" | ++ if sort -k 3 /dev/null 2>&1; then ++ sort -k 3 ++ else ++ sort +2 ++ fi | ++ uniq > "$nlist"S; then ++ : ++ else ++ grep -v "^: " < "$nlist" > "$nlist"S ++ fi ++ ++ if test -f "$nlist"S; then ++ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' ++ else ++ $echo '/* NONE */' >> "$output_objdir/$dlsyms" ++ fi ++ ++ $echo >> "$output_objdir/$dlsyms" "\ ++ ++#undef lt_preloaded_symbols ++ ++#if defined (__STDC__) && __STDC__ ++# define lt_ptr void * ++#else ++# define lt_ptr char * ++# define const ++#endif ++ ++/* The mapping between symbol names and symbols. */ ++" ++ ++ case $host in ++ *cygwin* | *mingw* ) ++ $echo >> "$output_objdir/$dlsyms" "\ ++/* DATA imports from DLLs on WIN32 can't be const, because ++ runtime relocations are performed -- see ld's documentation ++ on pseudo-relocs */ ++struct { ++" ++ ;; ++ * ) ++ $echo >> "$output_objdir/$dlsyms" "\ ++const struct { ++" ++ ;; ++ esac ++ ++ ++ $echo >> "$output_objdir/$dlsyms" "\ ++ const char *name; ++ lt_ptr address; ++} ++lt_preloaded_symbols[] = ++{\ ++" ++ ++ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" ++ ++ $echo >> "$output_objdir/$dlsyms" "\ ++ {0, (lt_ptr) 0} ++}; ++ ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt_preloaded_symbols; ++} ++#endif ++ ++#ifdef __cplusplus ++} ++#endif\ ++" ++ fi ++ ++ pic_flag_for_symtable= ++ case $host in ++ # compiling the symbol table file with pic_flag works around ++ # a FreeBSD bug that causes programs to crash when -lm is ++ # linked before any other PIC object. But we must not use ++ # pic_flag when linking with -static. The problem exists in ++ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. ++ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) ++ case "$compile_command " in ++ *" -static "*) ;; ++ *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; ++ esac;; ++ *-*-hpux*) ++ case "$compile_command " in ++ *" -static "*) ;; ++ *) pic_flag_for_symtable=" $pic_flag";; ++ esac ++ esac ++ ++ # Now compile the dynamic symbol file. ++ $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" ++ $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? ++ ++ # Clean up the generated files. ++ $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" ++ $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" ++ ++ # Transform the symbol file into the correct name. ++ case $host in ++ *cygwin* | *mingw* ) ++ if test -f "$output_objdir/${outputname}.def" ; then ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` ++ else ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ fi ++ ;; ++ * ) ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ ;; ++ esac ++ ;; ++ *) ++ $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ else ++ # We keep going just in case the user didn't refer to ++ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe ++ # really was required. ++ ++ # Nullify the symbol file. ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` ++ fi ++ ++ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then ++ # Replace the output file specification. ++ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` ++ link_command="$compile_command$compile_rpath" ++ ++ # We have no uninstalled library dependencies, so finalize right now. ++ $show "$link_command" ++ $run eval "$link_command" ++ exit_status=$? ++ ++ # Delete the generated files. ++ if test -n "$dlsyms"; then ++ $show "$rm $output_objdir/${outputname}S.${objext}" ++ $run $rm "$output_objdir/${outputname}S.${objext}" ++ fi ++ ++ exit $exit_status ++ fi ++ ++ if test -n "$shlibpath_var"; then ++ # We should set the shlibpath_var ++ rpath= ++ for dir in $temp_rpath; do ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) ++ # Absolute path. ++ rpath="$rpath$dir:" ++ ;; ++ *) ++ # Relative path: add a thisdir entry. ++ rpath="$rpath\$thisdir/$dir:" ++ ;; ++ esac ++ done ++ temp_rpath="$rpath" ++ fi ++ ++ if test -n "$compile_shlibpath$finalize_shlibpath"; then ++ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" ++ fi ++ if test -n "$finalize_shlibpath"; then ++ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" ++ fi ++ ++ compile_var= ++ finalize_var= ++ if test -n "$runpath_var"; then ++ if test -n "$perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ compile_var="$runpath_var=\"$rpath\$$runpath_var\" " ++ fi ++ if test -n "$finalize_perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $finalize_perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " ++ fi ++ fi ++ ++ if test "$no_install" = yes; then ++ # We don't need to create a wrapper script. ++ link_command="$compile_var$compile_command$compile_rpath" ++ # Replace the output file specification. ++ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` ++ # Delete the old output file. ++ $run $rm $output ++ # Link the executable and exit ++ $show "$link_command" ++ $run eval "$link_command" || exit $? ++ exit $EXIT_SUCCESS ++ fi ++ ++ if test "$hardcode_action" = relink; then ++ # Fast installation is not supported ++ link_command="$compile_var$compile_command$compile_rpath" ++ relink_command="$finalize_var$finalize_command$finalize_rpath" ++ ++ $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 ++ $echo "$modename: \`$output' will be relinked during installation" 1>&2 ++ else ++ if test "$fast_install" != no; then ++ link_command="$finalize_var$compile_command$finalize_rpath" ++ if test "$fast_install" = yes; then ++ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` ++ else ++ # fast_install is set to needless ++ relink_command= ++ fi ++ else ++ link_command="$compile_var$compile_command$compile_rpath" ++ relink_command="$finalize_var$finalize_command$finalize_rpath" ++ fi ++ fi ++ ++ # Replace the output file specification. ++ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` ++ ++ # Delete the old output files. ++ $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname ++ ++ $show "$link_command" ++ $run eval "$link_command" || exit $? ++ ++ # Now create the wrapper script. ++ $show "creating $output" ++ ++ # Quote the relink command for shipping. ++ if test -n "$relink_command"; then ++ # Preserve any variables that may affect compiler behavior ++ for var in $variables_saved_for_relink; do ++ if eval test -z \"\${$var+set}\"; then ++ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" ++ elif eval var_value=\$$var; test -z "$var_value"; then ++ relink_command="$var=; export $var; $relink_command" ++ else ++ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` ++ relink_command="$var=\"$var_value\"; export $var; $relink_command" ++ fi ++ done ++ relink_command="(cd `pwd`; $relink_command)" ++ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` ++ fi ++ ++ # Quote $echo for shipping. ++ if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then ++ case $progpath in ++ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; ++ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; ++ esac ++ qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` ++ else ++ qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` ++ fi ++ ++ # Only actually do things if our run command is non-null. ++ if test -z "$run"; then ++ # win32 will think the script is a binary if it has ++ # a .exe suffix, so we strip it off here. ++ case $output in ++ *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; ++ esac ++ # test for cygwin because mv fails w/o .exe extensions ++ case $host in ++ *cygwin*) ++ exeext=.exe ++ outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; ++ *) exeext= ;; ++ esac ++ case $host in ++ *cygwin* | *mingw* ) ++ output_name=`basename $output` ++ output_path=`dirname $output` ++ cwrappersource="$output_path/$objdir/lt-$output_name.c" ++ cwrapper="$output_path/$output_name.exe" ++ $rm $cwrappersource $cwrapper ++ trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 ++ ++ cat > $cwrappersource <> $cwrappersource<<"EOF" ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#if defined(PATH_MAX) ++# define LT_PATHMAX PATH_MAX ++#elif defined(MAXPATHLEN) ++# define LT_PATHMAX MAXPATHLEN ++#else ++# define LT_PATHMAX 1024 ++#endif ++ ++#ifndef DIR_SEPARATOR ++# define DIR_SEPARATOR '/' ++# define PATH_SEPARATOR ':' ++#endif ++ ++#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ ++ defined (__OS2__) ++# define HAVE_DOS_BASED_FILE_SYSTEM ++# ifndef DIR_SEPARATOR_2 ++# define DIR_SEPARATOR_2 '\\' ++# endif ++# ifndef PATH_SEPARATOR_2 ++# define PATH_SEPARATOR_2 ';' ++# endif ++#endif ++ ++#ifndef DIR_SEPARATOR_2 ++# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) ++#else /* DIR_SEPARATOR_2 */ ++# define IS_DIR_SEPARATOR(ch) \ ++ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) ++#endif /* DIR_SEPARATOR_2 */ ++ ++#ifndef PATH_SEPARATOR_2 ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) ++#else /* PATH_SEPARATOR_2 */ ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) ++#endif /* PATH_SEPARATOR_2 */ ++ ++#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) ++#define XFREE(stale) do { \ ++ if (stale) { free ((void *) stale); stale = 0; } \ ++} while (0) ++ ++/* -DDEBUG is fairly common in CFLAGS. */ ++#undef DEBUG ++#if defined DEBUGWRAPPER ++# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) ++#else ++# define DEBUG(format, ...) ++#endif ++ ++const char *program_name = NULL; ++ ++void * xmalloc (size_t num); ++char * xstrdup (const char *string); ++const char * base_name (const char *name); ++char * find_executable(const char *wrapper); ++int check_executable(const char *path); ++char * strendzap(char *str, const char *pat); ++void lt_fatal (const char *message, ...); ++ ++int ++main (int argc, char *argv[]) ++{ ++ char **newargz; ++ int i; ++ ++ program_name = (char *) xstrdup (base_name (argv[0])); ++ DEBUG("(main) argv[0] : %s\n",argv[0]); ++ DEBUG("(main) program_name : %s\n",program_name); ++ newargz = XMALLOC(char *, argc+2); ++EOF ++ ++ cat >> $cwrappersource <> $cwrappersource <<"EOF" ++ newargz[1] = find_executable(argv[0]); ++ if (newargz[1] == NULL) ++ lt_fatal("Couldn't find %s", argv[0]); ++ DEBUG("(main) found exe at : %s\n",newargz[1]); ++ /* we know the script has the same name, without the .exe */ ++ /* so make sure newargz[1] doesn't end in .exe */ ++ strendzap(newargz[1],".exe"); ++ for (i = 1; i < argc; i++) ++ newargz[i+1] = xstrdup(argv[i]); ++ newargz[argc+1] = NULL; ++ ++ for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" ++ return 127; ++} ++ ++void * ++xmalloc (size_t num) ++{ ++ void * p = (void *) malloc (num); ++ if (!p) ++ lt_fatal ("Memory exhausted"); ++ ++ return p; ++} ++ ++char * ++xstrdup (const char *string) ++{ ++ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL ++; ++} ++ ++const char * ++base_name (const char *name) ++{ ++ const char *base; ++ ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ /* Skip over the disk name in MSDOS pathnames. */ ++ if (isalpha ((unsigned char)name[0]) && name[1] == ':') ++ name += 2; ++#endif ++ ++ for (base = name; *name; name++) ++ if (IS_DIR_SEPARATOR (*name)) ++ base = name + 1; ++ return base; ++} ++ ++int ++check_executable(const char * path) ++{ ++ struct stat st; ++ ++ DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); ++ if ((!path) || (!*path)) ++ return 0; ++ ++ if ((stat (path, &st) >= 0) && ++ ( ++ /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ ++#if defined (S_IXOTH) ++ ((st.st_mode & S_IXOTH) == S_IXOTH) || ++#endif ++#if defined (S_IXGRP) ++ ((st.st_mode & S_IXGRP) == S_IXGRP) || ++#endif ++ ((st.st_mode & S_IXUSR) == S_IXUSR)) ++ ) ++ return 1; ++ else ++ return 0; ++} ++ ++/* Searches for the full path of the wrapper. Returns ++ newly allocated full path name if found, NULL otherwise */ ++char * ++find_executable (const char* wrapper) ++{ ++ int has_slash = 0; ++ const char* p; ++ const char* p_next; ++ /* static buffer for getcwd */ ++ char tmp[LT_PATHMAX + 1]; ++ int tmp_len; ++ char* concat_name; ++ ++ DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); ++ ++ if ((wrapper == NULL) || (*wrapper == '\0')) ++ return NULL; ++ ++ /* Absolute path? */ ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++ else ++ { ++#endif ++ if (IS_DIR_SEPARATOR (wrapper[0])) ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ } ++#endif ++ ++ for (p = wrapper; *p; p++) ++ if (*p == '/') ++ { ++ has_slash = 1; ++ break; ++ } ++ if (!has_slash) ++ { ++ /* no slashes; search PATH */ ++ const char* path = getenv ("PATH"); ++ if (path != NULL) ++ { ++ for (p = path; *p; p = p_next) ++ { ++ const char* q; ++ size_t p_len; ++ for (q = p; *q; q++) ++ if (IS_PATH_SEPARATOR(*q)) ++ break; ++ p_len = q - p; ++ p_next = (*q == '\0' ? q : q + 1); ++ if (p_len == 0) ++ { ++ /* empty path: current directory */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen(tmp); ++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ } ++ else ++ { ++ concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, p, p_len); ++ concat_name[p_len] = '/'; ++ strcpy (concat_name + p_len + 1, wrapper); ++ } ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++ } ++ /* not found in PATH; assume curdir */ ++ } ++ /* Relative path | not found in path: prepend cwd */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen(tmp); ++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ return NULL; ++} ++ ++char * ++strendzap(char *str, const char *pat) ++{ ++ size_t len, patlen; ++ ++ assert(str != NULL); ++ assert(pat != NULL); ++ ++ len = strlen(str); ++ patlen = strlen(pat); ++ ++ if (patlen <= len) ++ { ++ str += len - patlen; ++ if (strcmp(str, pat) == 0) ++ *str = '\0'; ++ } ++ return str; ++} ++ ++static void ++lt_error_core (int exit_status, const char * mode, ++ const char * message, va_list ap) ++{ ++ fprintf (stderr, "%s: %s: ", program_name, mode); ++ vfprintf (stderr, message, ap); ++ fprintf (stderr, ".\n"); ++ ++ if (exit_status >= 0) ++ exit (exit_status); ++} ++ ++void ++lt_fatal (const char *message, ...) ++{ ++ va_list ap; ++ va_start (ap, message); ++ lt_error_core (EXIT_FAILURE, "FATAL", message, ap); ++ va_end (ap); ++} ++EOF ++ # we should really use a build-platform specific compiler ++ # here, but OTOH, the wrappers (shell script and this C one) ++ # are only useful if you want to execute the "real" binary. ++ # Since the "real" binary is built for $host, then this ++ # wrapper might as well be built for $host, too. ++ $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource ++ ;; ++ esac ++ $rm $output ++ trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 ++ ++ $echo > $output "\ ++#! $SHELL ++ ++# $output - temporary wrapper script for $objdir/$outputname ++# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP ++# ++# The $output program cannot be directly executed until all the libtool ++# libraries that it depends on are installed. ++# ++# This wrapper script should never be moved out of the build directory. ++# If it is, it will not operate correctly. ++ ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++Xsed='${SED} -e 1s/^X//' ++sed_quote_subst='$sed_quote_subst' ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++relink_command=\"$relink_command\" ++ ++# This environment variable determines our operation mode. ++if test \"\$libtool_install_magic\" = \"$magic\"; then ++ # install mode needs the following variable: ++ notinst_deplibs='$notinst_deplibs' ++else ++ # When we are sourced in execute mode, \$file and \$echo are already set. ++ if test \"\$libtool_execute_magic\" != \"$magic\"; then ++ echo=\"$qecho\" ++ file=\"\$0\" ++ # Make sure echo works. ++ if test \"X\$1\" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++ elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then ++ # Yippee, \$echo works! ++ : ++ else ++ # Restart under the correct shell, and then maybe \$echo will work. ++ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} ++ fi ++ fi\ ++" ++ $echo >> $output "\ ++ ++ # Find the directory that this script lives in. ++ thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` ++ test \"x\$thisdir\" = \"x\$file\" && thisdir=. ++ ++ # Follow symbolic links until we get to the real thisdir. ++ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` ++ while test -n \"\$file\"; do ++ destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` ++ ++ # If there was a directory component, then change thisdir. ++ if test \"x\$destdir\" != \"x\$file\"; then ++ case \"\$destdir\" in ++ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; ++ *) thisdir=\"\$thisdir/\$destdir\" ;; ++ esac ++ fi ++ ++ file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` ++ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` ++ done ++ ++ # Try to get the absolute directory name. ++ absdir=\`cd \"\$thisdir\" && pwd\` ++ test -n \"\$absdir\" && thisdir=\"\$absdir\" ++" ++ ++ if test "$fast_install" = yes; then ++ $echo >> $output "\ ++ program=lt-'$outputname'$exeext ++ progdir=\"\$thisdir/$objdir\" ++ ++ if test ! -f \"\$progdir/\$program\" || \\ ++ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ ++ test \"X\$file\" != \"X\$progdir/\$program\"; }; then ++ ++ file=\"\$\$-\$program\" ++ ++ if test ! -d \"\$progdir\"; then ++ $mkdir \"\$progdir\" ++ else ++ $rm \"\$progdir/\$file\" ++ fi" ++ ++ $echo >> $output "\ ++ ++ # relink executable if necessary ++ if test -n \"\$relink_command\"; then ++ if relink_command_output=\`eval \$relink_command 2>&1\`; then : ++ else ++ $echo \"\$relink_command_output\" >&2 ++ $rm \"\$progdir/\$file\" ++ exit $EXIT_FAILURE ++ fi ++ fi ++ ++ $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || ++ { $rm \"\$progdir/\$program\"; ++ $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } ++ $rm \"\$progdir/\$file\" ++ fi" ++ else ++ $echo >> $output "\ ++ program='$outputname' ++ progdir=\"\$thisdir/$objdir\" ++" ++ fi ++ ++ $echo >> $output "\ ++ ++ if test -f \"\$progdir/\$program\"; then" ++ ++ # Export our shlibpath_var if we have one. ++ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then ++ $echo >> $output "\ ++ # Add our own library path to $shlibpath_var ++ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" ++ ++ # Some systems cannot cope with colon-terminated $shlibpath_var ++ # The second colon is a workaround for a bug in BeOS R4 sed ++ $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` ++ ++ export $shlibpath_var ++" ++ fi ++ ++ # fixup the dll searchpath if we need to. ++ if test -n "$dllsearchpath"; then ++ $echo >> $output "\ ++ # Add the dll search path components to the executable PATH ++ PATH=$dllsearchpath:\$PATH ++" ++ fi ++ ++ $echo >> $output "\ ++ if test \"\$libtool_execute_magic\" != \"$magic\"; then ++ # Run the actual program with our arguments. ++ ++ # Make sure env LD_LIBRARY_PATH does not mess us up ++ if test -n \"\${LD_LIBRARY_PATH+set}\"; then ++ export LD_LIBRARY_PATH=\$progdir:\$LD_LIBRARY_PATH ++ fi ++" ++ case $host in ++ # Backslashes separate directories on plain windows ++ *-*-mingw | *-*-os2*) ++ $echo >> $output "\ ++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} ++" ++ ;; ++ ++ *) ++ $echo >> $output "\ ++ exec \"\$progdir/\$program\" \${1+\"\$@\"} ++" ++ ;; ++ esac ++ $echo >> $output "\ ++ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" ++ exit $EXIT_FAILURE ++ fi ++ else ++ # The program doesn't exist. ++ \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 ++ \$echo \"This script is just a wrapper for \$program.\" 1>&2 ++ $echo \"See the $PACKAGE documentation for more information.\" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++fi\ ++" ++ chmod +x $output ++ fi ++ exit $EXIT_SUCCESS ++ ;; ++ esac ++ ++ # See if we need to build an old-fashioned archive. ++ for oldlib in $oldlibs; do ++ ++ if test "$build_libtool_libs" = convenience; then ++ oldobjs="$libobjs_save" ++ addlibs="$convenience" ++ build_libtool_libs=no ++ else ++ if test "$build_libtool_libs" = module; then ++ oldobjs="$libobjs_save" ++ build_libtool_libs=no ++ else ++ oldobjs="$old_deplibs $non_pic_objects" ++ fi ++ addlibs="$old_convenience" ++ fi ++ ++ if test -n "$addlibs"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" ++ ++ func_extract_archives $gentop $addlibs ++ oldobjs="$oldobjs $func_extract_archives_result" ++ fi ++ ++ # Do each command in the archive commands. ++ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then ++ cmds=$old_archive_from_new_cmds ++ else ++ # POSIX demands no paths to be encoded in archives. We have ++ # to avoid creating archives with duplicate basenames if we ++ # might have to extract them afterwards, e.g., when creating a ++ # static archive out of a convenience library, or when linking ++ # the entirety of a libtool archive into another (currently ++ # not supported by libtool). ++ if (for obj in $oldobjs ++ do ++ $echo "X$obj" | $Xsed -e 's%^.*/%%' ++ done | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ $echo "copying selected object files to avoid basename conflicts..." ++ ++ if test -z "$gentop"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" ++ ++ $show "${rm}r $gentop" ++ $run ${rm}r "$gentop" ++ $show "$mkdir $gentop" ++ $run $mkdir "$gentop" ++ exit_status=$? ++ if test "$exit_status" -ne 0 && test ! -d "$gentop"; then ++ exit $exit_status ++ fi ++ fi ++ ++ save_oldobjs=$oldobjs ++ oldobjs= ++ counter=1 ++ for obj in $save_oldobjs ++ do ++ objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` ++ case " $oldobjs " in ++ " ") oldobjs=$obj ;; ++ *[\ /]"$objbase "*) ++ while :; do ++ # Make sure we don't pick an alternate name that also ++ # overlaps. ++ newobj=lt$counter-$objbase ++ counter=`expr $counter + 1` ++ case " $oldobjs " in ++ *[\ /]"$newobj "*) ;; ++ *) if test ! -f "$gentop/$newobj"; then break; fi ;; ++ esac ++ done ++ $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" ++ $run ln "$obj" "$gentop/$newobj" || ++ $run cp "$obj" "$gentop/$newobj" ++ oldobjs="$oldobjs $gentop/$newobj" ++ ;; ++ *) oldobjs="$oldobjs $obj" ;; ++ esac ++ done ++ fi ++ ++ eval cmds=\"$old_archive_cmds\" ++ ++ if len=`expr "X$cmds" : ".*"` && ++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ cmds=$old_archive_cmds ++ else ++ # the command line is too long to link in one step, link in parts ++ $echo "using piecewise archive linking..." ++ save_RANLIB=$RANLIB ++ RANLIB=: ++ objlist= ++ concat_cmds= ++ save_oldobjs=$oldobjs ++ ++ # Is there a better way of finding the last object in the list? ++ for obj in $save_oldobjs ++ do ++ last_oldobj=$obj ++ done ++ for obj in $save_oldobjs ++ do ++ oldobjs="$objlist $obj" ++ objlist="$objlist $obj" ++ eval test_cmds=\"$old_archive_cmds\" ++ if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && ++ test "$len" -le "$max_cmd_len"; then ++ : ++ else ++ # the above command should be used before it gets too long ++ oldobjs=$objlist ++ if test "$obj" = "$last_oldobj" ; then ++ RANLIB=$save_RANLIB ++ fi ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" ++ objlist= ++ fi ++ done ++ RANLIB=$save_RANLIB ++ oldobjs=$objlist ++ if test "X$oldobjs" = "X" ; then ++ eval cmds=\"\$concat_cmds\" ++ else ++ eval cmds=\"\$concat_cmds~\$old_archive_cmds\" ++ fi ++ fi ++ fi ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ eval cmd=\"$cmd\" ++ IFS="$save_ifs" ++ $show "$cmd" ++ $run eval "$cmd" || exit $? ++ done ++ IFS="$save_ifs" ++ done ++ ++ if test -n "$generated"; then ++ $show "${rm}r$generated" ++ $run ${rm}r$generated ++ fi ++ ++ # Now create the libtool archive. ++ case $output in ++ *.la) ++ old_library= ++ test "$build_old_libs" = yes && old_library="$libname.$libext" ++ $show "creating $output" ++ ++ # Preserve any variables that may affect compiler behavior ++ for var in $variables_saved_for_relink; do ++ if eval test -z \"\${$var+set}\"; then ++ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" ++ elif eval var_value=\$$var; test -z "$var_value"; then ++ relink_command="$var=; export $var; $relink_command" ++ else ++ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` ++ relink_command="$var=\"$var_value\"; export $var; $relink_command" ++ fi ++ done ++ # Quote the link command for shipping. ++ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" ++ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` ++ if test "$hardcode_automatic" = yes ; then ++ relink_command= ++ fi ++ ++ ++ # Only create the output if not a dry run. ++ if test -z "$run"; then ++ for installed in no yes; do ++ if test "$installed" = yes; then ++ if test -z "$install_libdir"; then ++ break ++ fi ++ output="$output_objdir/$outputname"i ++ # Replace all uninstalled libtool libraries with the installed ones ++ newdependency_libs= ++ for deplib in $dependency_libs; do ++ case $deplib in ++ *.la) ++ name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` ++ if test -z "$libdir"; then ++ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ if test "X$EGREP" = X ; then ++ EGREP=egrep ++ fi ++ # We do not want portage's install root ($D) present. Check only for ++ # this if the .la is being installed. ++ if test "$installed" = yes && test "$D"; then ++ eval mynewdependency_lib=`echo "$libdir/$name" |sed -e "s:$D:/:g" -e 's:/\+:/:g'` ++ else ++ mynewdependency_lib="$libdir/$name" ++ fi ++ # Do not add duplicates ++ if test "$mynewdependency_lib"; then ++ my_little_ninja_foo_1=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"` ++ if test -z "$my_little_ninja_foo_1"; then ++ newdependency_libs="$newdependency_libs $mynewdependency_lib" ++ fi ++ fi ++ ;; ++ *) ++ if test "$installed" = yes; then ++ # Rather use S=WORKDIR if our version of portage supports it. ++ # This is because some ebuild (gcc) do not use $S as buildroot. ++ if test "$PWORKDIR"; then ++ S="$PWORKDIR" ++ fi ++ # We do not want portage's build root ($S) present. ++ my_little_ninja_foo_2=`echo $deplib |$EGREP -e "$S"` ++ # We do not want portage's install root ($D) present. ++ my_little_ninja_foo_3=`echo $deplib |$EGREP -e "$D"` ++ if test -n "$my_little_ninja_foo_2" && test "$S"; then ++ mynewdependency_lib="" ++ elif test -n "$my_little_ninja_foo_3" && test "$D"; then ++ eval mynewdependency_lib=`echo "$deplib" |sed -e "s:$D:/:g" -e 's:/\+:/:g'` ++ else ++ mynewdependency_lib="$deplib" ++ fi ++ else ++ mynewdependency_lib="$deplib" ++ fi ++ # Do not add duplicates ++ if test "$mynewdependency_lib"; then ++ my_little_ninja_foo_4=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"` ++ if test -z "$my_little_ninja_foo_4"; then ++ newdependency_libs="$newdependency_libs $mynewdependency_lib" ++ fi ++ fi ++ ;; ++ esac ++ done ++ dependency_libs="$newdependency_libs" ++ newdlfiles= ++ for lib in $dlfiles; do ++ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` ++ if test -z "$libdir"; then ++ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ newdlfiles="$newdlfiles $libdir/$name" ++ done ++ dlfiles="$newdlfiles" ++ newdlprefiles= ++ for lib in $dlprefiles; do ++ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` ++ if test -z "$libdir"; then ++ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ newdlprefiles="$newdlprefiles $libdir/$name" ++ done ++ dlprefiles="$newdlprefiles" ++ else ++ newdlfiles= ++ for lib in $dlfiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ newdlfiles="$newdlfiles $abs" ++ done ++ dlfiles="$newdlfiles" ++ newdlprefiles= ++ for lib in $dlprefiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ newdlprefiles="$newdlprefiles $abs" ++ done ++ dlprefiles="$newdlprefiles" ++ fi ++ $rm $output ++ # place dlname in correct position for cygwin ++ tdlname=$dlname ++ case $host,$output,$installed,$module,$dlname in ++ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; ++ esac ++ # Do not add duplicates ++ if test "$installed" = yes && test "$D"; then ++ install_libdir=`echo "$install_libdir" |sed -e "s:$D:/:g" -e 's:/\+:/:g'` ++ fi ++ $echo > $output "\ ++# $outputname - a libtool library file ++# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP ++# ++# Please DO NOT delete this file! ++# It is necessary for linking the library. ++ ++# The name that we can dlopen(3). ++dlname='$tdlname' ++ ++# Names of this library. ++library_names='$library_names' ++ ++# The name of the static archive. ++old_library='$old_library' ++ ++# Libraries that this one depends upon. ++dependency_libs='$dependency_libs' ++ ++# Version information for $libname. ++current=$current ++age=$age ++revision=$revision ++ ++# Is this an already installed library? ++installed=$installed ++ ++# Should we warn about portability when linking against -modules? ++shouldnotlink=$module ++ ++# Files to dlopen/dlpreopen ++dlopen='$dlfiles' ++dlpreopen='$dlprefiles' ++ ++# Directory that this library needs to be installed in: ++libdir='$install_libdir'" ++ if test "$installed" = no && test "$need_relink" = yes; then ++ $echo >> $output "\ ++relink_command=\"$relink_command\"" ++ fi ++ done ++ fi ++ ++ # Do a symbolic link so that the libtool archive can be found in ++ # LD_LIBRARY_PATH before the program is installed. ++ $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" ++ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ++ ;; ++ esac ++ exit $EXIT_SUCCESS ++ ;; ++ ++ # libtool install mode ++ install) ++ modename="$modename: install" ++ ++ # There may be an optional sh(1) argument at the beginning of ++ # install_prog (especially on Windows NT). ++ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || ++ # Allow the use of GNU shtool's install command. ++ $echo "X$nonopt" | grep shtool > /dev/null; then ++ # Aesthetically quote it. ++ arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ install_prog="$arg " ++ arg="$1" ++ shift ++ else ++ install_prog= ++ arg=$nonopt ++ fi ++ ++ # The real first argument should be the name of the installation program. ++ # Aesthetically quote it. ++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ install_prog="$install_prog$arg" ++ ++ # We need to accept at least all the BSD install flags. ++ dest= ++ files= ++ opts= ++ prev= ++ install_type= ++ isdir=no ++ stripme= ++ for arg ++ do ++ if test -n "$dest"; then ++ files="$files $dest" ++ dest=$arg ++ continue ++ fi ++ ++ case $arg in ++ -d) isdir=yes ;; ++ -f) ++ case " $install_prog " in ++ *[\\\ /]cp\ *) ;; ++ *) prev=$arg ;; ++ esac ++ ;; ++ -g | -m | -o) prev=$arg ;; ++ -s) ++ stripme=" -s" ++ continue ++ ;; ++ -*) ++ ;; ++ *) ++ # If the previous option needed an argument, then skip it. ++ if test -n "$prev"; then ++ prev= ++ else ++ dest=$arg ++ continue ++ fi ++ ;; ++ esac ++ ++ # Aesthetically quote the argument. ++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ install_prog="$install_prog $arg" ++ done ++ ++ if test -z "$install_prog"; then ++ $echo "$modename: you must specify an install program" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ if test -n "$prev"; then ++ $echo "$modename: the \`$prev' option requires an argument" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ if test -z "$files"; then ++ if test -z "$dest"; then ++ $echo "$modename: no file or destination specified" 1>&2 ++ else ++ $echo "$modename: you must specify a destination" 1>&2 ++ fi ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Strip any trailing slash from the destination. ++ dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` ++ ++ # Check to see that the destination is a directory. ++ test -d "$dest" && isdir=yes ++ if test "$isdir" = yes; then ++ destdir="$dest" ++ destname= ++ else ++ destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` ++ test "X$destdir" = "X$dest" && destdir=. ++ destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` ++ ++ # Not a directory, so check to see that there is only one file specified. ++ set dummy $files ++ if test "$#" -gt 2; then ++ $echo "$modename: \`$dest' is not a directory" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ fi ++ case $destdir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ for file in $files; do ++ case $file in ++ *.lo) ;; ++ *) ++ $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ done ++ ;; ++ esac ++ ++ # This variable tells wrapper scripts just to set variables rather ++ # than running their programs. ++ libtool_install_magic="$magic" ++ ++ staticlibs= ++ future_libdirs= ++ current_libdirs= ++ for file in $files; do ++ ++ # Do each installation. ++ case $file in ++ *.$libext) ++ # Do the static libraries later. ++ staticlibs="$staticlibs $file" ++ ;; ++ ++ *.la) ++ # Check to see that this really is a libtool archive. ++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : ++ else ++ $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ library_names= ++ old_library= ++ relink_command= ++ # If there is no directory component, then add one. ++ case $file in ++ */* | *\\*) . $file ;; ++ *) . ./$file ;; ++ esac ++ ++ # Add the libdir to current_libdirs if it is the destination. ++ if test "X$destdir" = "X$libdir"; then ++ case "$current_libdirs " in ++ *" $libdir "*) ;; ++ *) current_libdirs="$current_libdirs $libdir" ;; ++ esac ++ else ++ # Note the libdir as a future libdir. ++ case "$future_libdirs " in ++ *" $libdir "*) ;; ++ *) future_libdirs="$future_libdirs $libdir" ;; ++ esac ++ fi ++ ++ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ ++ test "X$dir" = "X$file/" && dir= ++ dir="$dir$objdir" ++ ++ if test -n "$relink_command"; then ++ # Determine the prefix the user has applied to our future dir. ++ inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` ++ ++ # Don't allow the user to place us outside of our expected ++ # location b/c this prevents finding dependent libraries that ++ # are installed to the same prefix. ++ # At present, this check doesn't affect windows .dll's that ++ # are installed into $libdir/../bin (currently, that works fine) ++ # but it's something to keep an eye on. ++ if test "$inst_prefix_dir" = "$destdir"; then ++ $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ if test -n "$inst_prefix_dir"; then ++ # Stick the inst_prefix_dir data into the link command. ++ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` ++ else ++ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` ++ fi ++ ++ $echo "$modename: warning: relinking \`$file'" 1>&2 ++ $show "$relink_command" ++ if $run eval "$relink_command"; then : ++ else ++ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ fi ++ ++ # See the names of the shared library. ++ set dummy $library_names ++ if test -n "$2"; then ++ realname="$2" ++ shift ++ shift ++ ++ srcname="$realname" ++ test -n "$relink_command" && srcname="$realname"T ++ ++ # Install the shared library and build the symlinks. ++ $show "$install_prog $dir/$srcname $destdir/$realname" ++ $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? ++ if test -n "$stripme" && test -n "$striplib"; then ++ $show "$striplib $destdir/$realname" ++ $run eval "$striplib $destdir/$realname" || exit $? ++ fi ++ ++ if test "$#" -gt 0; then ++ # Delete the old symlinks, and create new ones. ++ # Try `ln -sf' first, because the `ln' binary might depend on ++ # the symlink we replace! Solaris /bin/ln does not understand -f, ++ # so we also need to try rm && ln -s. ++ for linkname ++ do ++ if test "$linkname" != "$realname"; then ++ $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" ++ $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" ++ fi ++ done ++ fi ++ ++ # Do each command in the postinstall commands. ++ lib="$destdir/$realname" ++ cmds=$postinstall_cmds ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $show "$cmd" ++ $run eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' ++ fi ++ ++ exit $lt_exit ++ } ++ done ++ IFS="$save_ifs" ++ fi ++ ++ # Install the pseudo-library for information purposes. ++ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` ++ instname="$dir/$name"i ++ $show "$install_prog $instname $destdir/$name" ++ $run eval "$install_prog $instname $destdir/$name" || exit $? ++ ++ # Maybe install the static library, too. ++ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ++ ;; ++ ++ *.lo) ++ # Install (i.e. copy) a libtool object. ++ ++ # Figure out destination file name, if it wasn't already specified. ++ if test -n "$destname"; then ++ destfile="$destdir/$destname" ++ else ++ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` ++ destfile="$destdir/$destfile" ++ fi ++ ++ # Deduce the name of the destination old-style object file. ++ case $destfile in ++ *.lo) ++ staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` ++ ;; ++ *.$objext) ++ staticdest="$destfile" ++ destfile= ++ ;; ++ *) ++ $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ ++ # Install the libtool object if requested. ++ if test -n "$destfile"; then ++ $show "$install_prog $file $destfile" ++ $run eval "$install_prog $file $destfile" || exit $? ++ fi ++ ++ # Install the old object if enabled. ++ if test "$build_old_libs" = yes; then ++ # Deduce the name of the old-style object file. ++ staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` ++ ++ $show "$install_prog $staticobj $staticdest" ++ $run eval "$install_prog \$staticobj \$staticdest" || exit $? ++ fi ++ exit $EXIT_SUCCESS ++ ;; ++ ++ *) ++ # Figure out destination file name, if it wasn't already specified. ++ if test -n "$destname"; then ++ destfile="$destdir/$destname" ++ else ++ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` ++ destfile="$destdir/$destfile" ++ fi ++ ++ # If the file is missing, and there is a .exe on the end, strip it ++ # because it is most likely a libtool script we actually want to ++ # install ++ stripped_ext="" ++ case $file in ++ *.exe) ++ if test ! -f "$file"; then ++ file=`$echo $file|${SED} 's,.exe$,,'` ++ stripped_ext=".exe" ++ fi ++ ;; ++ esac ++ ++ # Do a test to see if this is really a libtool program. ++ case $host in ++ *cygwin*|*mingw*) ++ wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` ++ ;; ++ *) ++ wrapper=$file ++ ;; ++ esac ++ if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then ++ notinst_deplibs= ++ relink_command= ++ ++ # Note that it is not necessary on cygwin/mingw to append a dot to ++ # foo even if both foo and FILE.exe exist: automatic-append-.exe ++ # behavior happens only for exec(3), not for open(2)! Also, sourcing ++ # `FILE.' does not work on cygwin managed mounts. ++ # ++ # If there is no directory component, then add one. ++ case $wrapper in ++ */* | *\\*) . ${wrapper} ;; ++ *) . ./${wrapper} ;; ++ esac ++ ++ # Check the variables that should have been set. ++ if test -z "$notinst_deplibs"; then ++ $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ finalize=yes ++ for lib in $notinst_deplibs; do ++ # Check to see that each library is installed. ++ libdir= ++ if test -f "$lib"; then ++ # If there is no directory component, then add one. ++ case $lib in ++ */* | *\\*) . $lib ;; ++ *) . ./$lib ;; ++ esac ++ fi ++ libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test ++ if test -n "$libdir" && test ! -f "$libfile"; then ++ $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 ++ finalize=no ++ fi ++ done ++ ++ relink_command= ++ # Note that it is not necessary on cygwin/mingw to append a dot to ++ # foo even if both foo and FILE.exe exist: automatic-append-.exe ++ # behavior happens only for exec(3), not for open(2)! Also, sourcing ++ # `FILE.' does not work on cygwin managed mounts. ++ # ++ # If there is no directory component, then add one. ++ case $wrapper in ++ */* | *\\*) . ${wrapper} ;; ++ *) . ./${wrapper} ;; ++ esac ++ ++ outputname= ++ if test "$fast_install" = no && test -n "$relink_command"; then ++ if test "$finalize" = yes && test -z "$run"; then ++ tmpdir=`func_mktempdir` ++ file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` ++ outputname="$tmpdir/$file" ++ # Replace the output file specification. ++ relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` ++ ++ $show "$relink_command" ++ if $run eval "$relink_command"; then : ++ else ++ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 ++ ${rm}r "$tmpdir" ++ continue ++ fi ++ file="$outputname" ++ else ++ $echo "$modename: warning: cannot relink \`$file'" 1>&2 ++ fi ++ else ++ # Install the binary that we compiled earlier. ++ file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` ++ fi ++ fi ++ ++ # remove .exe since cygwin /usr/bin/install will append another ++ # one anyway ++ case $install_prog,$host in ++ */usr/bin/install*,*cygwin*) ++ case $file:$destfile in ++ *.exe:*.exe) ++ # this is ok ++ ;; ++ *.exe:*) ++ destfile=$destfile.exe ++ ;; ++ *:*.exe) ++ destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` ++ ;; ++ esac ++ ;; ++ esac ++ $show "$install_prog$stripme $file $destfile" ++ $run eval "$install_prog\$stripme \$file \$destfile" || exit $? ++ test -n "$outputname" && ${rm}r "$tmpdir" ++ ;; ++ esac ++ done ++ ++ for file in $staticlibs; do ++ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` ++ ++ # Set up the ranlib parameters. ++ oldlib="$destdir/$name" ++ ++ $show "$install_prog $file $oldlib" ++ $run eval "$install_prog \$file \$oldlib" || exit $? ++ ++ if test -n "$stripme" && test -n "$old_striplib"; then ++ $show "$old_striplib $oldlib" ++ $run eval "$old_striplib $oldlib" || exit $? ++ fi ++ ++ # Do each command in the postinstall commands. ++ cmds=$old_postinstall_cmds ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $show "$cmd" ++ $run eval "$cmd" || exit $? ++ done ++ IFS="$save_ifs" ++ done ++ ++ if test -n "$future_libdirs"; then ++ $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 ++ fi ++ ++ if test -n "$current_libdirs"; then ++ # Maybe just do a dry run. ++ test -n "$run" && current_libdirs=" -n$current_libdirs" ++ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' ++ else ++ exit $EXIT_SUCCESS ++ fi ++ ;; ++ ++ # libtool finish mode ++ finish) ++ modename="$modename: finish" ++ libdirs="$nonopt" ++ admincmds= ++ ++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then ++ for dir ++ do ++ libdirs="$libdirs $dir" ++ done ++ ++ for libdir in $libdirs; do ++ if test -n "$finish_cmds"; then ++ # Do each command in the finish commands. ++ cmds=$finish_cmds ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $show "$cmd" ++ $run eval "$cmd" || admincmds="$admincmds ++ $cmd" ++ done ++ IFS="$save_ifs" ++ fi ++ if test -n "$finish_eval"; then ++ # Do the single finish_eval. ++ eval cmds=\"$finish_eval\" ++ $run eval "$cmds" || admincmds="$admincmds ++ $cmds" ++ fi ++ done ++ fi ++ ++ # Exit here if they wanted silent mode. ++ test "$show" = : && exit $EXIT_SUCCESS ++ ++ $echo "X----------------------------------------------------------------------" | $Xsed ++ $echo "Libraries have been installed in:" ++ for libdir in $libdirs; do ++ $echo " $libdir" ++ done ++ $echo ++ $echo "If you ever happen to want to link against installed libraries" ++ $echo "in a given directory, LIBDIR, you must either use libtool, and" ++ $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" ++ $echo "flag during linking and do at least one of the following:" ++ if test -n "$shlibpath_var"; then ++ $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" ++ $echo " during execution" ++ fi ++ if test -n "$runpath_var"; then ++ $echo " - add LIBDIR to the \`$runpath_var' environment variable" ++ $echo " during linking" ++ fi ++ if test -n "$hardcode_libdir_flag_spec"; then ++ libdir=LIBDIR ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ ++ $echo " - use the \`$flag' linker flag" ++ fi ++ if test -n "$admincmds"; then ++ $echo " - have your system administrator run these commands:$admincmds" ++ fi ++ if test -f /etc/ld.so.conf; then ++ $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" ++ fi ++ $echo ++ $echo "See any operating system documentation about shared libraries for" ++ $echo "more information, such as the ld(1) and ld.so(8) manual pages." ++ $echo "X----------------------------------------------------------------------" | $Xsed ++ exit $EXIT_SUCCESS ++ ;; ++ ++ # libtool execute mode ++ execute) ++ modename="$modename: execute" ++ ++ # The first argument is the command name. ++ cmd="$nonopt" ++ if test -z "$cmd"; then ++ $echo "$modename: you must specify a COMMAND" 1>&2 ++ $echo "$help" ++ exit $EXIT_FAILURE ++ fi ++ ++ # Handle -dlopen flags immediately. ++ for file in $execute_dlfiles; do ++ if test ! -f "$file"; then ++ $echo "$modename: \`$file' is not a file" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ dir= ++ case $file in ++ *.la) ++ # Check to see that this really is a libtool archive. ++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : ++ else ++ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Read the libtool library. ++ dlname= ++ library_names= ++ ++ # If there is no directory component, then add one. ++ case $file in ++ */* | *\\*) . $file ;; ++ *) . ./$file ;; ++ esac ++ ++ # Skip this library if it cannot be dlopened. ++ if test -z "$dlname"; then ++ # Warn if it was a shared library. ++ test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" ++ continue ++ fi ++ ++ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` ++ test "X$dir" = "X$file" && dir=. ++ ++ if test -f "$dir/$objdir/$dlname"; then ++ dir="$dir/$objdir" ++ else ++ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ;; ++ ++ *.lo) ++ # Just add the directory containing the .lo file. ++ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` ++ test "X$dir" = "X$file" && dir=. ++ ;; ++ ++ *) ++ $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 ++ continue ++ ;; ++ esac ++ ++ # Get the absolute pathname. ++ absdir=`cd "$dir" && pwd` ++ test -n "$absdir" && dir="$absdir" ++ ++ # Now add the directory to shlibpath_var. ++ if eval "test -z \"\$$shlibpath_var\""; then ++ eval "$shlibpath_var=\"\$dir\"" ++ else ++ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" ++ fi ++ done ++ ++ # This variable tells wrapper scripts just to set shlibpath_var ++ # rather than running their programs. ++ libtool_execute_magic="$magic" ++ ++ # Check if any of the arguments is a wrapper script. ++ args= ++ for file ++ do ++ case $file in ++ -*) ;; ++ *) ++ # Do a test to see if this is really a libtool program. ++ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ # If there is no directory component, then add one. ++ case $file in ++ */* | *\\*) . $file ;; ++ *) . ./$file ;; ++ esac ++ ++ # Transform arg to wrapped name. ++ file="$progdir/$program" ++ fi ++ ;; ++ esac ++ # Quote arguments (to preserve shell metacharacters). ++ file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` ++ args="$args \"$file\"" ++ done ++ ++ if test -z "$run"; then ++ if test -n "$shlibpath_var"; then ++ # Export the shlibpath_var. ++ eval "export $shlibpath_var" ++ fi ++ ++ # Restore saved environment variables ++ if test "${save_LC_ALL+set}" = set; then ++ LC_ALL="$save_LC_ALL"; export LC_ALL ++ fi ++ if test "${save_LANG+set}" = set; then ++ LANG="$save_LANG"; export LANG ++ fi ++ ++ # Now prepare to actually exec the command. ++ exec_cmd="\$cmd$args" ++ else ++ # Display what would be done. ++ if test -n "$shlibpath_var"; then ++ eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" ++ $echo "export $shlibpath_var" ++ fi ++ $echo "$cmd$args" ++ exit $EXIT_SUCCESS ++ fi ++ ;; ++ ++ # libtool clean and uninstall mode ++ clean | uninstall) ++ modename="$modename: $mode" ++ rm="$nonopt" ++ files= ++ rmforce= ++ exit_status=0 ++ ++ # This variable tells wrapper scripts just to set variables rather ++ # than running their programs. ++ libtool_install_magic="$magic" ++ ++ for arg ++ do ++ case $arg in ++ -f) rm="$rm $arg"; rmforce=yes ;; ++ -*) rm="$rm $arg" ;; ++ *) files="$files $arg" ;; ++ esac ++ done ++ ++ if test -z "$rm"; then ++ $echo "$modename: you must specify an RM program" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ rmdirs= ++ ++ origobjdir="$objdir" ++ for file in $files; do ++ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$dir" = "X$file"; then ++ dir=. ++ objdir="$origobjdir" ++ else ++ objdir="$dir/$origobjdir" ++ fi ++ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` ++ test "$mode" = uninstall && objdir="$dir" ++ ++ # Remember objdir for removal later, being careful to avoid duplicates ++ if test "$mode" = clean; then ++ case " $rmdirs " in ++ *" $objdir "*) ;; ++ *) rmdirs="$rmdirs $objdir" ;; ++ esac ++ fi ++ ++ # Don't error if the file doesn't exist and rm -f was used. ++ if (test -L "$file") >/dev/null 2>&1 \ ++ || (test -h "$file") >/dev/null 2>&1 \ ++ || test -f "$file"; then ++ : ++ elif test -d "$file"; then ++ exit_status=1 ++ continue ++ elif test "$rmforce" = yes; then ++ continue ++ fi ++ ++ rmfiles="$file" ++ ++ case $name in ++ *.la) ++ # Possibly a libtool archive, so verify it. ++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ . $dir/$name ++ ++ # Delete the libtool libraries and symlinks. ++ for n in $library_names; do ++ rmfiles="$rmfiles $objdir/$n" ++ done ++ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" ++ ++ case "$mode" in ++ clean) ++ case " $library_names " in ++ # " " in the beginning catches empty $dlname ++ *" $dlname "*) ;; ++ *) rmfiles="$rmfiles $objdir/$dlname" ;; ++ esac ++ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ++ ;; ++ uninstall) ++ if test -n "$library_names"; then ++ # Do each command in the postuninstall commands. ++ cmds=$postuninstall_cmds ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $show "$cmd" ++ $run eval "$cmd" ++ if test "$?" -ne 0 && test "$rmforce" != yes; then ++ exit_status=1 ++ fi ++ done ++ IFS="$save_ifs" ++ fi ++ ++ if test -n "$old_library"; then ++ # Do each command in the old_postuninstall commands. ++ cmds=$old_postuninstall_cmds ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $show "$cmd" ++ $run eval "$cmd" ++ if test "$?" -ne 0 && test "$rmforce" != yes; then ++ exit_status=1 ++ fi ++ done ++ IFS="$save_ifs" ++ fi ++ # FIXME: should reinstall the best remaining shared library. ++ ;; ++ esac ++ fi ++ ;; ++ ++ *.lo) ++ # Possibly a libtool object, so verify it. ++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ ++ # Read the .lo file ++ . $dir/$name ++ ++ # Add PIC object to the list of files to remove. ++ if test -n "$pic_object" \ ++ && test "$pic_object" != none; then ++ rmfiles="$rmfiles $dir/$pic_object" ++ fi ++ ++ # Add non-PIC object to the list of files to remove. ++ if test -n "$non_pic_object" \ ++ && test "$non_pic_object" != none; then ++ rmfiles="$rmfiles $dir/$non_pic_object" ++ fi ++ fi ++ ;; ++ ++ *) ++ if test "$mode" = clean ; then ++ noexename=$name ++ case $file in ++ *.exe) ++ file=`$echo $file|${SED} 's,.exe$,,'` ++ noexename=`$echo $name|${SED} 's,.exe$,,'` ++ # $file with .exe has already been added to rmfiles, ++ # add $file without .exe ++ rmfiles="$rmfiles $file" ++ ;; ++ esac ++ # Do a test to see if this is a libtool program. ++ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ relink_command= ++ . $dir/$noexename ++ ++ # note $name still contains .exe if it was in $file originally ++ # as does the version of $file that was added into $rmfiles ++ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" ++ if test "$fast_install" = yes && test -n "$relink_command"; then ++ rmfiles="$rmfiles $objdir/lt-$name" ++ fi ++ if test "X$noexename" != "X$name" ; then ++ rmfiles="$rmfiles $objdir/lt-${noexename}.c" ++ fi ++ fi ++ fi ++ ;; ++ esac ++ $show "$rm $rmfiles" ++ $run $rm $rmfiles || exit_status=1 ++ done ++ objdir="$origobjdir" ++ ++ # Try to remove the ${objdir}s in the directories where we deleted files ++ for dir in $rmdirs; do ++ if test -d "$dir"; then ++ $show "rmdir $dir" ++ $run rmdir $dir >/dev/null 2>&1 ++ fi ++ done ++ ++ exit $exit_status ++ ;; ++ ++ "") ++ $echo "$modename: you must specify a MODE" 1>&2 ++ $echo "$generic_help" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ ++ if test -z "$exec_cmd"; then ++ $echo "$modename: invalid operation mode \`$mode'" 1>&2 ++ $echo "$generic_help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++fi # test -z "$show_help" ++ ++if test -n "$exec_cmd"; then ++ eval exec $exec_cmd ++ exit $EXIT_FAILURE ++fi ++ ++# We need to display help for each of the modes. ++case $mode in ++"") $echo \ ++"Usage: $modename [OPTION]... [MODE-ARG]... ++ ++Provide generalized library-building support services. ++ ++ --config show all configuration variables ++ --debug enable verbose shell tracing ++-n, --dry-run display commands without modifying any files ++ --features display basic configuration information and exit ++ --finish same as \`--mode=finish' ++ --help display this help message and exit ++ --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] ++ --quiet same as \`--silent' ++ --silent don't print informational messages ++ --tag=TAG use configuration variables from tag TAG ++ --version print version information ++ ++MODE must be one of the following: ++ ++ clean remove files from the build directory ++ compile compile a source file into a libtool object ++ execute automatically set library path, then run a program ++ finish complete the installation of libtool libraries ++ install install libraries or executables ++ link create a library or an executable ++ uninstall remove libraries from an installed directory ++ ++MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for ++a more detailed description of MODE. ++ ++Report bugs to ." ++ exit $EXIT_SUCCESS ++ ;; ++ ++clean) ++ $echo \ ++"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... ++ ++Remove files from the build directory. ++ ++RM is the name of the program to use to delete files associated with each FILE ++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed ++to RM. ++ ++If FILE is a libtool library, object or program, all the files associated ++with it are deleted. Otherwise, only FILE itself is deleted using RM." ++ ;; ++ ++compile) ++ $echo \ ++"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE ++ ++Compile a source file into a libtool library object. ++ ++This mode accepts the following additional options: ++ ++ -o OUTPUT-FILE set the output file name to OUTPUT-FILE ++ -prefer-pic try to building PIC objects only ++ -prefer-non-pic try to building non-PIC objects only ++ -static always build a \`.o' file suitable for static linking ++ ++COMPILE-COMMAND is a command to be used in creating a \`standard' object file ++from the given SOURCEFILE. ++ ++The output file name is determined by removing the directory component from ++SOURCEFILE, then substituting the C source code suffix \`.c' with the ++library object suffix, \`.lo'." ++ ;; ++ ++execute) ++ $echo \ ++"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... ++ ++Automatically set library path, then run a program. ++ ++This mode accepts the following additional options: ++ ++ -dlopen FILE add the directory containing FILE to the library path ++ ++This mode sets the library path environment variable according to \`-dlopen' ++flags. ++ ++If any of the ARGS are libtool executable wrappers, then they are translated ++into their corresponding uninstalled binary, and any of their required library ++directories are added to the library path. ++ ++Then, COMMAND is executed, with ARGS as arguments." ++ ;; ++ ++finish) ++ $echo \ ++"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... ++ ++Complete the installation of libtool libraries. ++ ++Each LIBDIR is a directory that contains libtool libraries. ++ ++The commands that this mode executes may require superuser privileges. Use ++the \`--dry-run' option if you just want to see what would be executed." ++ ;; ++ ++install) ++ $echo \ ++"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... ++ ++Install executables or libraries. ++ ++INSTALL-COMMAND is the installation command. The first component should be ++either the \`install' or \`cp' program. ++ ++The rest of the components are interpreted as arguments to that command (only ++BSD-compatible install options are recognized)." ++ ;; ++ ++link) ++ $echo \ ++"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... ++ ++Link object files or libraries together to form another library, or to ++create an executable program. ++ ++LINK-COMMAND is a command using the C compiler that you would use to create ++a program from several object files. ++ ++The following components of LINK-COMMAND are treated specially: ++ ++ -all-static do not do any dynamic linking at all ++ -avoid-version do not add a version suffix if possible ++ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime ++ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols ++ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) ++ -export-symbols SYMFILE ++ try to export only the symbols listed in SYMFILE ++ -export-symbols-regex REGEX ++ try to export only the symbols matching REGEX ++ -LLIBDIR search LIBDIR for required installed libraries ++ -lNAME OUTPUT-FILE requires the installed library libNAME ++ -module build a library that can dlopened ++ -no-fast-install disable the fast-install mode ++ -no-install link a not-installable executable ++ -no-undefined declare that a library does not refer to external symbols ++ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects ++ -objectlist FILE Use a list of object files found in FILE to specify objects ++ -precious-files-regex REGEX ++ don't remove output files matching REGEX ++ -release RELEASE specify package release information ++ -rpath LIBDIR the created library will eventually be installed in LIBDIR ++ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries ++ -static do not do any dynamic linking of libtool libraries ++ -version-info CURRENT[:REVISION[:AGE]] ++ specify library version info [each variable defaults to 0] ++ ++All other options (arguments beginning with \`-') are ignored. ++ ++Every other argument is treated as a filename. Files ending in \`.la' are ++treated as uninstalled libtool libraries, other files are standard or library ++object files. ++ ++If the OUTPUT-FILE ends in \`.la', then a libtool library is created, ++only library objects (\`.lo' files) may be specified, and \`-rpath' is ++required, except when creating a convenience library. ++ ++If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created ++using \`ar' and \`ranlib', or on Windows using \`lib'. ++ ++If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file ++is created, otherwise an executable program is created." ++ ;; ++ ++uninstall) ++ $echo \ ++"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... ++ ++Remove libraries from an installation directory. ++ ++RM is the name of the program to use to delete files associated with each FILE ++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed ++to RM. ++ ++If FILE is a libtool library, all the files associated with it are deleted. ++Otherwise, only FILE itself is deleted using RM." ++ ;; ++ ++*) ++ $echo "$modename: invalid operation mode \`$mode'" 1>&2 ++ $echo "$help" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++esac ++ ++$echo ++$echo "Try \`$modename --help' for more information about other modes." ++ ++exit $? ++ ++# The TAGs below are defined such that we never get into a situation ++# in which we disable both kinds of libraries. Given conflicting ++# choices, we go for a static library, that is the most portable, ++# since we can't tell whether shared libraries were disabled because ++# the user asked for that or because the platform doesn't support ++# them. This is particularly important on AIX, because we don't ++# support having both static and shared libraries enabled at the same ++# time on that platform, so we default to a shared-only configuration. ++# If a disable-shared tag is given, we'll fallback to a static-only ++# configuration. But we'll never go from static-only to shared-only. ++ ++# ### BEGIN LIBTOOL TAG CONFIG: disable-shared ++disable_libs=shared ++# ### END LIBTOOL TAG CONFIG: disable-shared ++ ++# ### BEGIN LIBTOOL TAG CONFIG: disable-static ++disable_libs=static ++# ### END LIBTOOL TAG CONFIG: disable-static ++ ++# Local Variables: ++# mode:shell-script ++# sh-indentation:2 ++# End: +diff -urN /var/empty/missing config/missing +--- /var/empty/missing Thu Jan 1 01:00:00 1970 ++++ config/missing Wed Nov 15 05:12:11 2006 +@@ -0,0 +1,360 @@ ++#! /bin/sh ++# Common stub for a few missing GNU programs while installing. ++ ++scriptversion=2005-06-08.21 ++ ++# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# Originally by Fran,cois Pinard , 1996. ++ ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2, or (at your option) ++# any later version. ++ ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++ ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA ++# 02110-1301, USA. ++ ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. ++ ++if test $# -eq 0; then ++ echo 1>&2 "Try \`$0 --help' for more information" ++ exit 1 ++fi ++ ++run=: ++ ++# In the cases where this matters, `missing' is being run in the ++# srcdir already. ++if test -f configure.ac; then ++ configure_ac=configure.ac ++else ++ configure_ac=configure.in ++fi ++ ++msg="missing on your system" ++ ++case "$1" in ++--run) ++ # Try to run requested program, and just exit if it succeeds. ++ run= ++ shift ++ "$@" && exit 0 ++ # Exit code 63 means version mismatch. This often happens ++ # when the user try to use an ancient version of a tool on ++ # a file that requires a minimum version. In this case we ++ # we should proceed has if the program had been absent, or ++ # if --run hadn't been passed. ++ if test $? = 63; then ++ run=: ++ msg="probably too old" ++ fi ++ ;; ++ ++ -h|--h|--he|--hel|--help) ++ echo "\ ++$0 [OPTION]... PROGRAM [ARGUMENT]... ++ ++Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an ++error status if there is no known handling for PROGRAM. ++ ++Options: ++ -h, --help display this help and exit ++ -v, --version output version information and exit ++ --run try to run the given command, and emulate it if it fails ++ ++Supported PROGRAM values: ++ aclocal touch file \`aclocal.m4' ++ autoconf touch file \`configure' ++ autoheader touch file \`config.h.in' ++ automake touch all \`Makefile.in' files ++ bison create \`y.tab.[ch]', if possible, from existing .[ch] ++ flex create \`lex.yy.c', if possible, from existing .c ++ help2man touch the output file ++ lex create \`lex.yy.c', if possible, from existing .c ++ makeinfo touch the output file ++ tar try tar, gnutar, gtar, then tar without non-portable flags ++ yacc create \`y.tab.[ch]', if possible, from existing .[ch] ++ ++Send bug reports to ." ++ exit $? ++ ;; ++ ++ -v|--v|--ve|--ver|--vers|--versi|--versio|--version) ++ echo "missing $scriptversion (GNU Automake)" ++ exit $? ++ ;; ++ ++ -*) ++ echo 1>&2 "$0: Unknown \`$1' option" ++ echo 1>&2 "Try \`$0 --help' for more information" ++ exit 1 ++ ;; ++ ++esac ++ ++# Now exit if we have it, but it failed. Also exit now if we ++# don't have it and --version was passed (most likely to detect ++# the program). ++case "$1" in ++ lex|yacc) ++ # Not GNU programs, they don't have --version. ++ ;; ++ ++ tar) ++ if test -n "$run"; then ++ echo 1>&2 "ERROR: \`tar' requires --run" ++ exit 1 ++ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then ++ exit 1 ++ fi ++ ;; ++ ++ *) ++ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then ++ # We have it, but it failed. ++ exit 1 ++ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then ++ # Could not run --version or --help. This is probably someone ++ # running `$TOOL --version' or `$TOOL --help' to check whether ++ # $TOOL exists and not knowing $TOOL uses missing. ++ exit 1 ++ fi ++ ;; ++esac ++ ++# If it does not exist, or fails to run (possibly an outdated version), ++# try to emulate it. ++case "$1" in ++ aclocal*) ++ echo 1>&2 "\ ++WARNING: \`$1' is $msg. You should only need it if ++ you modified \`acinclude.m4' or \`${configure_ac}'. You might want ++ to install the \`Automake' and \`Perl' packages. Grab them from ++ any GNU archive site." ++ touch aclocal.m4 ++ ;; ++ ++ autoconf) ++ echo 1>&2 "\ ++WARNING: \`$1' is $msg. You should only need it if ++ you modified \`${configure_ac}'. You might want to install the ++ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU ++ archive site." ++ touch configure ++ ;; ++ ++ autoheader) ++ echo 1>&2 "\ ++WARNING: \`$1' is $msg. You should only need it if ++ you modified \`acconfig.h' or \`${configure_ac}'. You might want ++ to install the \`Autoconf' and \`GNU m4' packages. Grab them ++ from any GNU archive site." ++ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` ++ test -z "$files" && files="config.h" ++ touch_files= ++ for f in $files; do ++ case "$f" in ++ *:*) touch_files="$touch_files "`echo "$f" | ++ sed -e 's/^[^:]*://' -e 's/:.*//'`;; ++ *) touch_files="$touch_files $f.in";; ++ esac ++ done ++ touch $touch_files ++ ;; ++ ++ automake*) ++ echo 1>&2 "\ ++WARNING: \`$1' is $msg. You should only need it if ++ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. ++ You might want to install the \`Automake' and \`Perl' packages. ++ Grab them from any GNU archive site." ++ find . -type f -name Makefile.am -print | ++ sed 's/\.am$/.in/' | ++ while read f; do touch "$f"; done ++ ;; ++ ++ autom4te) ++ echo 1>&2 "\ ++WARNING: \`$1' is needed, but is $msg. ++ You might have modified some files without having the ++ proper tools for further handling them. ++ You can get \`$1' as part of \`Autoconf' from any GNU ++ archive site." ++ ++ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` ++ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` ++ if test -f "$file"; then ++ touch $file ++ else ++ test -z "$file" || exec >$file ++ echo "#! /bin/sh" ++ echo "# Created by GNU Automake missing as a replacement of" ++ echo "# $ $@" ++ echo "exit 0" ++ chmod +x $file ++ exit 1 ++ fi ++ ;; ++ ++ bison|yacc) ++ echo 1>&2 "\ ++WARNING: \`$1' $msg. You should only need it if ++ you modified a \`.y' file. You may need the \`Bison' package ++ in order for those modifications to take effect. You can get ++ \`Bison' from any GNU archive site." ++ rm -f y.tab.c y.tab.h ++ if [ $# -ne 1 ]; then ++ eval LASTARG="\${$#}" ++ case "$LASTARG" in ++ *.y) ++ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` ++ if [ -f "$SRCFILE" ]; then ++ cp "$SRCFILE" y.tab.c ++ fi ++ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` ++ if [ -f "$SRCFILE" ]; then ++ cp "$SRCFILE" y.tab.h ++ fi ++ ;; ++ esac ++ fi ++ if [ ! -f y.tab.h ]; then ++ echo >y.tab.h ++ fi ++ if [ ! -f y.tab.c ]; then ++ echo 'main() { return 0; }' >y.tab.c ++ fi ++ ;; ++ ++ lex|flex) ++ echo 1>&2 "\ ++WARNING: \`$1' is $msg. You should only need it if ++ you modified a \`.l' file. You may need the \`Flex' package ++ in order for those modifications to take effect. You can get ++ \`Flex' from any GNU archive site." ++ rm -f lex.yy.c ++ if [ $# -ne 1 ]; then ++ eval LASTARG="\${$#}" ++ case "$LASTARG" in ++ *.l) ++ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` ++ if [ -f "$SRCFILE" ]; then ++ cp "$SRCFILE" lex.yy.c ++ fi ++ ;; ++ esac ++ fi ++ if [ ! -f lex.yy.c ]; then ++ echo 'main() { return 0; }' >lex.yy.c ++ fi ++ ;; ++ ++ help2man) ++ echo 1>&2 "\ ++WARNING: \`$1' is $msg. You should only need it if ++ you modified a dependency of a manual page. You may need the ++ \`Help2man' package in order for those modifications to take ++ effect. You can get \`Help2man' from any GNU archive site." ++ ++ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` ++ if test -z "$file"; then ++ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` ++ fi ++ if [ -f "$file" ]; then ++ touch $file ++ else ++ test -z "$file" || exec >$file ++ echo ".ab help2man is required to generate this page" ++ exit 1 ++ fi ++ ;; ++ ++ makeinfo) ++ echo 1>&2 "\ ++WARNING: \`$1' is $msg. You should only need it if ++ you modified a \`.texi' or \`.texinfo' file, or any other file ++ indirectly affecting the aspect of the manual. The spurious ++ call might also be the consequence of using a buggy \`make' (AIX, ++ DU, IRIX). You might want to install the \`Texinfo' package or ++ the \`GNU make' package. Grab either from any GNU archive site." ++ # The file to touch is that specified with -o ... ++ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` ++ if test -z "$file"; then ++ # ... or it is the one specified with @setfilename ... ++ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` ++ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` ++ # ... or it is derived from the source name (dir/f.texi becomes f.info) ++ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info ++ fi ++ # If the file does not exist, the user really needs makeinfo; ++ # let's fail without touching anything. ++ test -f $file || exit 1 ++ touch $file ++ ;; ++ ++ tar) ++ shift ++ ++ # We have already tried tar in the generic part. ++ # Look for gnutar/gtar before invocation to avoid ugly error ++ # messages. ++ if (gnutar --version > /dev/null 2>&1); then ++ gnutar "$@" && exit 0 ++ fi ++ if (gtar --version > /dev/null 2>&1); then ++ gtar "$@" && exit 0 ++ fi ++ firstarg="$1" ++ if shift; then ++ case "$firstarg" in ++ *o*) ++ firstarg=`echo "$firstarg" | sed s/o//` ++ tar "$firstarg" "$@" && exit 0 ++ ;; ++ esac ++ case "$firstarg" in ++ *h*) ++ firstarg=`echo "$firstarg" | sed s/h//` ++ tar "$firstarg" "$@" && exit 0 ++ ;; ++ esac ++ fi ++ ++ echo 1>&2 "\ ++WARNING: I can't seem to be able to run \`tar' with the given arguments. ++ You may want to install GNU tar or Free paxutils, or check the ++ command line arguments." ++ exit 1 ++ ;; ++ ++ *) ++ echo 1>&2 "\ ++WARNING: \`$1' is needed, and is $msg. ++ You might have modified some files without having the ++ proper tools for further handling them. Check the \`README' file, ++ it often tells you about the needed prerequisites for installing ++ this package. You may also peek at any GNU archive site, in case ++ some other package would contain this missing \`$1' program." ++ exit 1 ++ ;; ++esac ++ ++exit 0 ++ ++# Local variables: ++# eval: (add-hook 'write-file-hooks 'time-stamp) ++# time-stamp-start: "scriptversion=" ++# time-stamp-format: "%:y-%02m-%02d.%02H" ++# time-stamp-end: "$" ++# End: diff -ruN --exclude=CVS /usr/ports/audio/soundtouch/pkg-descr /home/trasz/soundtouch/pkg-descr --- /usr/ports/audio/soundtouch/pkg-descr Sun May 15 16:08:38 2005 +++ /home/trasz/soundtouch/pkg-descr Fri Dec 8 23:19:13 2006 @@ -14,4 +14,4 @@ example utility SoundStretch that allows processing .WAV audio files with command-line interface. -WWW: http://sky.prohosting.com/oparviai/soundtouch/ +WWW: http://www.surina.net/soundtouch/ diff -ruN --exclude=CVS /usr/ports/audio/soundtouch/pkg-plist /home/trasz/soundtouch/pkg-plist --- /usr/ports/audio/soundtouch/pkg-plist Sun May 15 16:08:38 2005 +++ /home/trasz/soundtouch/pkg-plist Fri Dec 8 23:19:13 2006 @@ -4,12 +4,14 @@ include/soundtouch/FIFOSamplePipe.h include/soundtouch/STTypes.h include/soundtouch/SoundTouch.h +include/soundtouch/soundtouch_config.h @dirrm include/soundtouch lib/libBPM.a lib/libBPM.la lib/libSoundTouch.a lib/libSoundTouch.la share/aclocal/soundtouch.m4 +libdata/pkgconfig/soundtouch-1.0.pc %%PORTDOCS%%%%DOCSDIR%%/COPYING.TXT %%PORTDOCS%%%%DOCSDIR%%/README.html %%PORTDOCS%%@dirrm %%DOCSDIR%%