Attachment 73969 Details for Bug 107109 – cenis.dmesg

cenis.dmesg

cenis.dmesg (text/plain), 7.81 KB, created by Joerg Lehners on 2006-12-22 21:10:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joerg Lehners

Created: 2006-12-22 21:10:13 UTC

Size: 7.81 KB

patch

obsolete

>KDB: debugger backends: ddb
>KDB: current backend: ddb
>Copyright (c) 1992-2006 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 6.2-PRERELEASE #0: Wed Dec 20 16:50:08 MET 2006
>    root@testido:/usr/src/sys/i386/compile/JL-DEBUG
>WARNING: WITNESS option enabled, expect reduced performance.
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.51-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
>  AMD Features=0x100000<NX>
>  Logical CPUs per core: 2
>real memory  = 2146369536 (2046 MB)
>avail memory = 2095550464 (1998 MB)
>ACPI APIC Table: <FSC    	 APIC  >
>ioapic0: Changing APIC ID to 1
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>kbd1 at kbdmux0
>ichwd module loaded
>acpi0: <PTLTD 	 XSDT> on motherboard
>acpi_bus_number: can't get _ADR
>acpi_bus_number: can't get _ADR
>acpi0: Power Button (fixed)
>acpi_bus_number: can't get _ADR
>acpi_bus_number: can't get _ADR
>acpi_bus_number: can't get _ADR
>acpi_bus_number: can't get _ADR
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf008-0xf00b on acpi0
>cpu0: <ACPI CPU> on acpi0
>acpi_perf0: <ACPI CPU Frequency Control> on cpu0
>acpi_perf0: failed in PERF_STATUS attach
>device_attach: acpi_perf0 attach returned 6
>p4tcc0: <CPU Frequency Thermal Control> on cpu0
>acpi_perf0: <ACPI CPU Frequency Control> on cpu0
>acpi_perf0: failed in PERF_STATUS attach
>device_attach: acpi_perf0 attach returned 6
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>pci1: <display, VGA> at device 0.0 (no driver attached)
>pci1: <display> at device 0.1 (no driver attached)
>pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
>pci3: <ACPI PCI bus> on pcib2
>pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
>pci5: <ACPI PCI bus> on pcib3
>pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
>pci7: <ACPI PCI bus> on pcib4
>bge0: <Broadcom BCM5750 A1, ASIC rev. 0x4001> mem 0xf0200000-0xf020ffff irq 18 at device 0.0 on pci7
>miibus0: <MII bus> on bge0
>brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
>bge0: Ethernet address: 00:30:05:81:65:65
>pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
>pci9: <ACPI PCI bus> on pcib5
>uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x2000-0x201f irq 23 at device 29.0 on pci0
>uhci0: [GIANT-LOCKED]
>usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
>usb0: USB revision 1.0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x2400-0x241f irq 22 at device 29.1 on pci0
>uhci1: [GIANT-LOCKED]
>usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
>usb1: USB revision 1.0
>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x2800-0x281f irq 21 at device 29.2 on pci0
>uhci2: [GIANT-LOCKED]
>usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
>usb2: USB revision 1.0
>uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub2: 2 ports with 2 removable, self powered
>uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x2c00-0x2c1f irq 20 at device 29.3 on pci0
>uhci3: [GIANT-LOCKED]
>usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
>usb3: USB revision 1.0
>uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub3: 2 ports with 2 removable, self powered
>ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xf0000000-0xf00003ff irq 23 at device 29.7 on pci0
>ehci0: [GIANT-LOCKED]
>usb4: EHCI version 1.0
>usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
>usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
>usb4: USB revision 2.0
>uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
>uhub4: 8 ports with 8 removable, self powered
>pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci11: <ACPI PCI bus> on pcib6
>fwohci0: <Lucent FW322/323> mem 0xf0300000-0xf0300fff irq 22 at device 6.0 on pci11
>fwohci0: OHCI version 1.0 (ROM=1)
>fwohci0: No. of Isochronous channels is 8.
>fwohci0: EUI64 00:30:05:31:00:0e:dd:4e
>fwohci0: Phy 1394a available S400, 2 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>fwe0: <Ethernet over FireWire> on firewire0
>if_fwe0: Fake Ethernet address: 02:30:05:0e:dd:4e
>fwe0: Ethernet address: 02:30:05:0e:dd:4e
>fwe0: if_start running deferred for Giant
>fwip0: <IP over FireWire> on firewire0
>fwip0: Firewire address: 00:30:05:31:00:0e:dd:4e @ 0xfffe00000000, S400, maxrec 2048
>sbp0: <SBP-2/SCSI over FireWire> on firewire0
>fwohci0: Initiate bus reset
>fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
>firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
>firewire0: bus manager 0 (me)
>pcm0: <Intel ICH6 (82801FB)> port 0x3400-0x34ff,0x3000-0x303f mem 0xf0000800-0xf00009ff,0xf0000400-0xf00004ff irq 17 at device 30.2 on pci0
>pcm0: primary codec not ready!
>pcm0: <Analog Devices AD1986 AC97 Codec>
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3c00-0x3c0f at device 31.1 on pci0
>ata0: <ATA channel 0> on atapci0
>ata1: <ATA channel 1> on atapci0
>atapci1: <Intel ICH6 SATA150 controller> port 0x3c30-0x3c37,0x3c24-0x3c27,0x3c28-0x3c2f,0x3c20-0x3c23,0x3c10-0x3c1f mem 0xf0000c00-0xf0000fff irq 19 at device 31.2 on pci0
>ata2: <ATA channel 0> on atapci1
>ata3: <ATA channel 1> on atapci1
>ichsmb0: <SMBus controller> port 0x3800-0x381f irq 19 at device 31.3 on pci0
>ichsmb0: [GIANT-LOCKED]
>smbus0: <System Management Bus> on ichsmb0
>smb0: <SMBus generic I/O> on smbus0
>speaker0: <PC speaker> port 0x61 on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: [GIANT-LOCKED]
>psm0: model IntelliMouse Explorer, device ID 4
>ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/8 bytes threshold
>ppbus0: <Parallel port bus> on ppc0
>plip0: <PLIP network interface> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>pps0: <Pulse per second Timing Interface> on ppbus0
>sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>sio0: type 16550A, console
>ichwd0: <Intel 82801FB/FR watchdog timer> on isa0
>pmtimer0 on isa0
>orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x100>
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounter "TSC" frequency 2992513665 Hz quality 800
>Timecounters tick every 1.000 msec
>acd0: DVDR <NEC DVD RW ND-3500AG/2.86> at ata0-master UDMA33
>ad0: 76319MB <Seagate ST380013AS 3.00> at ata2-master SATA150
>cd4 at ata0 bus 0 target 0 lun 0
>cd4: <_NEC DVD_RW ND-3500AG 2.86> Removable CD-ROM SCSI-0 device 
>cd4: 33.000MB/s transfers
>cd4: Attempt to query device size failed: NOT READY, Medium not present
>Trying to mount root from ufs:/dev/ad0s1a
>[...]

Actions: View

Attachments on bug 107109: 73969 | 73970 | 73971