Attachment 80900 Details for Bug 115947 – file.txt

file.txt

file.txt (text/plain), 6.42 KB, created by Dieter Houthooft on 2007-08-30 17:20:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dieter Houthooft

Created: 2007-08-30 17:20:10 UTC

Size: 6.42 KB

patch

obsolete

>Copyright (c) 1992-2007 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
>    root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Xeon(R) CPU            3050  @ 2.13GHz (2133.42-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0x6f2  Stepping = 2
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
>  AMD Features=0x20100000<NX,LM>
>  AMD Features2=0x1<LAHF>
>  Cores per package: 2
>real memory  = 2147221504 (2047 MB)
>avail memory = 2096209920 (1999 MB)
>ACPI APIC Table: <DELL   PE_SC3  >
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
>ioapic0: Changing APIC ID to 2
>ioapic1: Changing APIC ID to 3
>ioapic1: WARNING: intbase 32 != expected base 24
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>ioapic1 <Version 2.0> irqs 32-55 on motherboard
>kbd1 at kbdmux0
>ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>acpi0: <DELL PE_SC3> on motherboard
>acpi0: Power Button (fixed)
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>cpu0: <ACPI CPU> on acpi0
>cpu1: <ACPI CPU> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>pcib2: <PCI-PCI bridge> at device 0.0 on pci1
>pci2: <PCI bus> on pcib2
>mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xfe9fc000-0xfe9fffff,0xfe9e0000-0xfe9effff irq 16 at device 8.0 on pci2
>mpt0: [GIANT-LOCKED]
>mpt0: MPI Version=1.5.13.0
>mpt0: mpt_cam_event: 0x16
>mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
>mpt0: mpt_cam_event: 0x12
>mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
>mpt0: mpt_cam_event: 0x16
>mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
>pci1: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
>pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
>pci4: <ACPI PCI bus> on pcib4
>pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0
>pci5: <ACPI PCI bus> on pcib5
>bge0: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xfe4f0000-0xfe4fffff irq 16 at device 0.0 on pci5
>miibus0: <MII bus> on bge0
>brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
>bge0: Ethernet address: 00:18:8b:f9:df:08
>pcib6: <ACPI PCI-PCI bridge> at device 28.5 on pci0
>pci6: <ACPI PCI bus> on pcib6
>bge1: <Broadcom BCM5750 B1, ASIC rev. 0x4101> mem 0xfe2f0000-0xfe2fffff irq 17 at device 0.0 on pci6
>miibus1: <MII bus> on bge1
>brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1
>brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
>bge1: Ethernet address: 00:18:8b:f9:df:09
>uhci0: <UHCI (generic) USB controller> port 0xace0-0xacff irq 20 at device 29.0 on pci0
>uhci0: [GIANT-LOCKED]
>usb0: <UHCI (generic) USB controller> on uhci0
>usb0: USB revision 1.0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <UHCI (generic) USB controller> port 0xacc0-0xacdf irq 21 at device 29.1 on pci0
>uhci1: [GIANT-LOCKED]
>usb1: <UHCI (generic) USB controller> on uhci1
>usb1: USB revision 1.0
>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>uhci2: <UHCI (generic) USB controller> port 0xaca0-0xacbf irq 22 at device 29.2 on pci0
>uhci2: [GIANT-LOCKED]
>usb2: <UHCI (generic) USB controller> on uhci2
>usb2: USB revision 1.0
>uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub2: 2 ports with 2 removable, self powered
>ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfeb00000-0xfeb003ff irq 20 at device 29.7 on pci0
>ehci0: [GIANT-LOCKED]
>usb3: EHCI version 1.0
>usb3: wrong number of companions (7 != 3)
>usb3: companion controllers, 2 ports each: usb0 usb1 usb2
>usb3: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
>usb3: USB revision 2.0
>uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
>uhub3: 6 ports with 6 removable, self powered
>uhub4: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2
>uhub4: multiple transaction translators
>uhub4: 4 ports with 4 removable, self powered
>pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci7: <ACPI PCI bus> on pcib7
>pci7: <display, VGA> at device 5.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
>ata0: <ATA channel 0> on atapci0
>ata1: <ATA channel 1> on atapci0
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
>fdc0: does not respond
>device_attach: fdc0 attach returned 6
>sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>sio0: type 16550A, console
>fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
>fdc0: does not respond
>device_attach: fdc0 attach returned 6
>pmtimer0 on isa0
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xd0000-0xd17ff,0xec000-0xeffff on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>ppc0: parallel port not found.
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x100>
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounters tick every 1.000 msec
>acd0: CDRW <TSSTcorpCD-RW/DVD-ROM TSL462D/DE04> at ata0-master UDMA33
>SMP: AP CPU #1 Launched!
>da0 at mpt0 bus 0 target 0 lun 0
>da0: <SEAGATE ST3300555SS T107> Fixed Direct Access SCSI-5 device 
>da0: 300.000MB/s transfers, Tagged Queueing Enabled
>da0: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
>Trying to mount root from ufs:/dev/da0s1a
>bge0: link state changed to UP

Actions: View

Attachments on bug 115947: 80900