FreeBSD Bugzilla – Attachment 84377 Details for
Bug 120367
NDIS0 not working (no link)
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
file.txt
file.txt (text/plain), 12.77 KB, created by
Rostyslav
on 2008-02-07 20:40:01 UTC
(
hide
)
Description:
file.txt
Filename:
MIME Type:
Creator:
Rostyslav
Created:
2008-02-07 20:40:01 UTC
Size:
12.77 KB
patch
obsolete
> >FreeBSD andriasis 6.3-RC2 FreeBSD 6.3-RC2 #30: Sun Jan 6 01:08:03 UTC 2008 root@rivendell.desktopbsd.net:/usr/obj/usr/src/sys/GENERIC amd64 amd64 GENERIC > >--------------------- >pciconf > >ndis0@pci6:2:0: class=0x028000 card=0x1355103c chip=0x431814e4 rev=0x02 hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'BCM43XX Broadcom 802.11b/g' > class = network > >-------------------------------------------- > >ifconfig > >ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet6 fe80::214:a5ff:fea4:fdcf%ndis0 prefixlen 64 scopeid 0x1 > ether 00:14:a5:a4:fd:cf > media: IEEE 802.11 Wireless Ethernet autoselect > status: no carrier > ssid "" channel 1 > authmode OPEN privacy OFF txpowmax 100 bmiss 7 protmode CTS >fwe0: flags=108802<BROADCAST,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500 > options=8<VLAN_MTU> > ether 66:3f:02:43:40:7a > ch 1 dma -1 >rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > options=8<VLAN_MTU> > inet6 fe80::216:d4ff:fe08:58e2%rl0 prefixlen 64 scopeid 0x3 > ether 00:16:d4:08:58:e2 > media: Ethernet autoselect (none) > status: no carrier >lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 > inet 127.0.0.1 netmask 0xff000000 > > >---------------------------------------------------- > >dmesg > >Copyright (c) 1992-2008 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 6.3-RC2 #30: Sun Jan 6 01:08:03 UTC 2008 > root@rivendell.desktopbsd.net:/usr/obj/usr/src/sys/GENERIC >Timecounter "i8254" frequency 1193182 Hz quality 0 >CPU: AMD Turion(tm) 64 Mobile Technology ML-34 (1794.79-MHz K8-class CPU) > Origin = "AuthenticAMD" Id = 0x20f42 Stepping = 2 > Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> > Features2=0x1<SSE3> > AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> > AMD Features2=0x1<LAHF> >real memory = 1072300032 (1022 MB) >avail memory = 1018093568 (970 MB) >ACPI APIC Table: <PTLTD APIC > >MADT: Forcing active-low polarity and level trigger for SCI >ioapic0 <Version 2.1> irqs 0-23 on motherboard >kbd1 at kbdmux0 >ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) >hptrr: HPT RocketRAID controller driver v1.1 (Jan 6 2008 01:07:24) >acpi0: <PTLTD RSDT> on motherboard >acpi0: Power Button (fixed) >acpi0: Sleep Button (fixed) >unknown: I/O range not supported >Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 >acpi_ec0: <Embedded Controller: GPE 0x1a> port 0x62,0x66 on acpi0 >cpu0: <ACPI CPU> on acpi0 >acpi_throttle0: <ACPI CPU Throttling> on cpu0 >powernow0: <PowerNow! K8> on cpu0 >acpi_lid0: <Control Method Lid Switch> on acpi0 >acpi_button0: <Power Button> on acpi0 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >pci0: <ACPI PCI bus> on pcib0 >pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 >pci1: <ACPI PCI bus> on pcib1 >pci1: <display, VGA> at device 5.0 (no driver attached) >pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 >pci2: <ACPI PCI bus> on pcib2 >ohci0: <ATI SB400 USB Controller> mem 0xc0000000-0xc0000fff irq 19 at device 19.0 on pci0 >ohci0: [GIANT-LOCKED] >usb0: OHCI version 1.0, legacy support >usb0: <ATI SB400 USB Controller> on ohci0 >usb0: USB revision 1.0 >uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub0: 4 ports with 4 removable, self powered >ohci1: <ATI SB400 USB Controller> mem 0xc0001000-0xc0001fff irq 19 at device 19.1 on pci0 >ohci1: [GIANT-LOCKED] >usb1: OHCI version 1.0, legacy support >usb1: <ATI SB400 USB Controller> on ohci1 >usb1: USB revision 1.0 >uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub1: 4 ports with 4 removable, self powered >ehci0: <ATI SB400 USB 2.0 controller> mem 0xc0002000-0xc0002fff irq 19 at device 19.2 on pci0 >ehci0: [GIANT-LOCKED] >usb2: EHCI version 1.0 >usb2: companion controllers, 4 ports each: usb0 usb1 >usb2: <ATI SB400 USB 2.0 controller> on ehci0 >usb2: USB revision 2.0 >uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 >uhub2: 8 ports with 8 removable, self powered >uhub2: port 4, set config at addr 2 failed >uhub2: device problem (TIMEOUT), disabling port 4 >pci0: <serial bus, SMBus> at device 20.0 (no driver attached) >atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on pci0 >ata0: <ATA channel 0> on atapci0 >ata1: <ATA channel 1> on atapci0 >isab0: <PCI-ISA bridge> at device 20.3 on pci0 >isa0: <ISA bus> on isab0 >pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 >pci6: <ACPI PCI bus> on pcib3 >ndis0: <Broadcom 802.11b/g WLAN> mem 0xc0204000-0xc0205fff irq 21 at device 2.0 on pci6 >ndis0: NDIS API version: 5.1 >fpudna in kernel mode! >ndis0: Ethernet address: 00:14:a5:a4:fd:cf >cbb0: <PCI-CardBus Bridge> mem 0xc0208000-0xc0208fff irq 20 at device 4.0 on pci6 >cardbus0: <CardBus bus> on cbb0 >pccard0: <16-bit PCCard bus> on cbb0 >fwohci0: <1394 Open Host Controller Interface> mem 0xc0209000-0xc02097ff,0xc0200000-0xc0203fff irq 23 at device 4.2 on pci6 >fwohci0: OHCI version 1.10 (ROM=0) >fwohci0: No. of Isochronous channels is 4. >fwohci0: EUI64 65:3f:02:00:49:43:40:7a >fwohci0: Phy 1394a available S400, 2 ports. >fwohci0: Link S400, max_rec 2048 bytes. >firewire0: <IEEE1394(FireWire) bus> on fwohci0 >fwe0: <Ethernet over FireWire> on firewire0 >if_fwe0: Fake Ethernet address: 66:3f:02:43:40:7a >fwe0: Ethernet address: 66:3f:02:43:40:7a >fwe0: if_start running deferred for Giant >sbp0: <SBP-2/SCSI over FireWire> on firewire0 >fwohci0: Initiate bus reset >fwohci0: BUS reset >fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode >firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) >firewire0: bus manager 0 (me) >fwohci0: phy int >pci6: <mass storage> at device 4.3 (no driver attached) >pci6: <base peripheral> at device 4.4 (no driver attached) >rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xc020a400-0xc020a4ff irq 22 at device 6.0 on pci6 >miibus0: <MII bus> on rl0 >rlphy0: <RealTek internal media interface> on miibus0 >rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >rl0: Ethernet address: 00:16:d4:08:58:e2 >pcm0: <ATI IXP 400> mem 0xc0003400-0xc00034ff irq 17 at device 20.5 on pci0 >pci0: <simple comms, generic modem> at device 20.6 (no driver attached) >acpi_tz0: <Thermal Zone> on acpi0 >atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >kbd0 at atkbd0 >atkbd0: [GIANT-LOCKED] >psm0: <PS/2 Mouse> irq 12 on atkbdc0 >psm0: [GIANT-LOCKED] >psm0: model IntelliMouse, device ID 3 >battery0: <ACPI Control Method Battery> on acpi0 >acpi_acad0: <AC Adapter> on acpi0 >orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd5fff,0xd7800-0xd7fff,0xd8000-0xd8fff on isa0 >ppc0: cannot reserve I/O port range >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >sio0: configured irq 4 not in bitmap of probed irqs 0 >sio0: port may not be enabled >sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >sio0: type 8250 or not responding >sio1: configured irq 3 not in bitmap of probed irqs 0 >sio1: port may not be enabled >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >uhid0: Microsoft Microsoft Wireless Optical Mouse\M-. 1.00, rev 2.00/0.07, addr 2, iclass 3/1 >Timecounter "TSC" frequency 1794793375 Hz quality 800 >Timecounters tick every 1.000 msec >hptrr: no controller detected. >ad0: 76319MB <Seagate ST98823A 3.05> at ata0-master UDMA100 >acd0: DVDR <HL-DT-ST DVDRAM GSA-4084N/KQ09> at ata1-master PIO4 >pcm0: <Conexant CX20468-21 AC97 Codec> >acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01 >acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01 >cd0 at ata1 bus 0 target 0 lun 0 >cd0: <HL-DT-ST DVDRAM GSA-4084N KQ09> Removable CD-ROM SCSI-0 device >cd0: 16.000MB/s transfers >cd0: Attempt to query device size failed: NOT READY, Medium not present >Trying to mount root from ufs:/dev/ad0s2a >kldload: Unsupported file type >fpudna in kernel mode! >fpudna in kernel mode! >fpudna in kernel mode! >fpudna in kernel mode! >fpudna in kernel mode! >fpudna in kernel mode! >fpudna in kernel mode! >fpudna in kernel mode! >fpudna in kernel mode! >fpudna in kernel mode! >fpudna in kernel mode! >fpudna in kernel mode! >fpudna in kernel mode! >g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5 >kldload: Unsupported file type >kldload: Unsupported file type > >------------------------------------------------------------ > >andriasis# dhclient ndis0 >ndis0: no link .............. giving up >andriasis# > >------------------------------------------------------------ > > >andriasis# ifconfig ndis0 scan >ifconfig: unable to get scan results >andriasis# > >------------------------------------- > >andriasis# /etc/rc.d/netif stop ndis0 >Stopping network:Stopping wpa_supplicant. >Waiting for PIDS: 304. > ndis0. >andriasis# /etc/rc.d/netif start ndis0 >Starting wpa_supplicant. >ndis0: no link .............. giving up >ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet6 fe80::214:a5ff:fea4:fdcf%ndis0 prefixlen 64 scopeid 0x1 > ether 00:14:a5:a4:fd:cf > media: IEEE 802.11 Wireless Ethernet autoselect > status: no carrier > ssid "" channel 1 > authmode OPEN privacy OFF txpowmax 100 bmiss 7 protmode CTS >andriasis# > > > >------------------------------------------------------------------------------------------- > > >andriasis# sysctl dev.ndis >dev.ndis.0.%desc: Broadcom 802.11b/g WLAN >dev.ndis.0.%driver: ndis >dev.ndis.0.%location: slot=2 function=0 >dev.ndis.0.%pnpinfo: vendor=0x14e4 device=0x4318 subvendor=0x103c subdevice=0x1355 class=0x028000 >dev.ndis.0.%parent: pci6 >dev.ndis.0.PowerSaveMode: 0 >dev.ndis.0.frag: 2346 >dev.ndis.0.rts: 2347 >dev.ndis.0.ssid_auto_promote: 0 >dev.ndis.0.MPC: 1 >dev.ndis.0.NetworkAddress: >dev.ndis.0.PwrOut: 100 >dev.ndis.0.FrameBursting: 1 >dev.ndis.0.BTCoexist: 0 >dev.ndis.0.EnableSoftAP: 0 >dev.ndis.0.EnableLeap: 1 >dev.ndis.0.EnableAutoConnect: 0 >dev.ndis.0.Managed: 1 >dev.ndis.0.gpiotimerval: 0xa0000 >dev.ndis.0.WEP: >dev.ndis.0.NetworkType: -1 >dev.ndis.0.SSID: >dev.ndis.0.scan_channel_time: -1 >dev.ndis.0.scan_unassoc_time: -1 >dev.ndis.0.scan_home_time: -1 >dev.ndis.0.scan_passes: -1 >dev.ndis.0.BadFramePreempt: 0 >dev.ndis.0.Interference_Mode: -1 >dev.ndis.0.Channel: 11 >dev.ndis.0.ccx_rm: 1 >dev.ndis.0.ccx_rm_limit: 300 >dev.ndis.0.EFCEnable: 0 >dev.ndis.0.WME: -1 >dev.ndis.0.vlan_mode: -1 >dev.ndis.0.WZCCoexist: 0 >dev.ndis.0.MixedCell: 0 >dev.ndis.0.Afterburner: 1 >dev.ndis.0.RoamTrigger: -75 >dev.ndis.0.PLCPHeader: 0 >dev.ndis.0.IBSSGMode: 0 >dev.ndis.0.IBSSGProtection: 2 >dev.ndis.0.Rate: 0 >dev.ndis.0.Country: US >dev.ndis.0.gpio0: 3 >dev.ndis.0.gpio1: 2 >dev.ndis.0.gpio2: 0 >dev.ndis.0.gpio3: 0 >dev.ndis.0.Environment: 1 >dev.ndis.0.NdisVersion: 0x00050001 >dev.ndis.0.BusType: 5 >dev.ndis.0.InterruptNumber: 21 >dev.ndis.0.ForcePIO: UNSET >dev.ndis.0.AdapterDesc: UNSET >dev.ndis.0.DriverDesc: UNSET >dev.ndis.0.Brand: UNSET >dev.ndis.0.WPA: UNSET >dev.ndis.0.featureflag: UNSET >dev.ndis.0.IBSSAllowed: UNSET >dev.ndis.0.LegacyMode: UNSET >dev.ndis.0.LegacyProbe: UNSET >dev.ndis.0.band: UNSET >dev.ndis.0.RateA: UNSET >dev.ndis.0.ledblinkslow: UNSET >dev.ndis.0.ledblinkmed: UNSET >dev.ndis.0.ledblinkfast: UNSET >dev.ndis.0.WME_qosinfo: UNSET >dev.ndis.0.RadioState: UNSET >dev.ndis.0.AssocRoamPref: UNSET >dev.ndis.0.RoamDelta: UNSET >dev.ndis.0.ApCompatMode: UNSET >dev.ndis.0.IBSSLink: UNSET >dev.ndis.0.antdiv: UNSET >dev.ndis.0.BandPref: UNSET >dev.ndis.0.11HNetworks: UNSET >dev.ndis.0.scan_passive_time: UNSET >andriasis# > > > >------------------------------------------------ > > > >wpa_supplicant.conf > >network={ > ssid="motorola D74" > scan_ssid=1 > key_mgmt=NONE > wep_tx_keyidx=0 > wep_key1=0 >} > >----------------------------------------------- > >ee /etc/rc.conf ~ >~ >#ifconfig_ndis0="DHCP" >ifconfig_ndis0="WPA DHCP" >hostname="andriasis" >~ >----------------------------- > >andriasis# ifconfig ndis0 down >andriasis# ifconfig ndis0 up >andriasis# ifconfig ndis0 >ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet6 fe80::214:a5ff:fea4:fdcf%ndis0 prefixlen 64 scopeid 0x1 > ether 00:14:a5:a4:fd:cf > media: IEEE 802.11 Wireless Ethernet autoselect > status: no carrier > ssid "" channel 1 > authmode OPEN privacy OFF txpowmax 100 bmiss 7 protmode CTS >andriasis# > > > >ligh is on but it dont work at all > > >----------------------------------------- > >loader.conf > >~ >bcmwl564_sys_load="YES" >if_ndis_load="YES" >ndis_load="YES" >wlan_load="YES" >wlan_ccmp_load="YES" >wlan_tkip_load="YES" >~ > >end of file
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 120367
: 84377