Attachment 86905 Details for Bug 123423 – serialcomms.patch.2.diff

[patch] serialcomms.patch.2.diff

serialcomms.patch.2.diff (text/plain), 2.62 KB, created by Gabor Pali on 2008-05-05 19:10:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gabor Pali

Created: 2008-05-05 19:10:04 UTC

Size: 2.62 KB

patch

obsolete

>Index: chapter.sgml
>===================================================================
>RCS file: /doc/en_US.ISO8859-1/books/handbook/serialcomms/chapter.sgml,v
>retrieving revision 1.120
>diff -u -r1.120 chapter.sgml
>--- chapter.sgml	28 Dec 2007 11:11:43 -0000	1.120
>+++ chapter.sgml	5 May 2008 04:27:47 -0000
>@@ -1317,7 +1317,7 @@
> 	<prompt>login:</prompt> message at an initial speed and watches the
> 	characters that come back in response.  If the user sees junk, it is
> 	assumed that they know they should press the
>-	<keycode>Enter</keycode> key until they see a recognizable
>+	<keycap>Enter</keycap> key until they see a recognizable
> 	prompt.  If the data rates do not match, <command>getty</command> sees
> 	anything the user types as <quote>junk</quote>, tries going to the next
> 	speed and gives the <prompt>login:</prompt> prompt again.  This
>@@ -1744,7 +1744,7 @@
> 	<para>Try dialing into the system; be sure to use 8 bits, no parity,
> 	  and 1
> 	  stop bit on the remote system.  If you do not get a prompt right
>-	  away, or get garbage, try pressing <keycode>Enter</keycode>
>+	  away, or get garbage, try pressing <keycap>Enter</keycap>
> 	  about once per second.  If you still do not see a
> 	  <prompt>login:</prompt> prompt after a while, try sending a
> 	  <command>BREAK</command>. If you are using a high-speed modem to do
>@@ -2455,7 +2455,7 @@
> 	    you may want to do so in order to make sure things are set up
> 	    correctly.</para>
> 
>-	  <para>Hit any key, other than <keycode>Enter</keycode>, at the console to
>+	  <para>Hit any key, other than <keycap>Enter</keycap>, at the console to
> 	    interrupt the boot process.  The boot blocks will then prompt you
> 	    for further action.  You should now see something like:</para>
> 
>@@ -2466,12 +2466,12 @@
> 	  <para>Verify the above message appears on either the serial or
> 	    internal console or both, according to the options you put in
> 	    <filename>/boot.config</filename>.  If the message appears in the
>-	    correct console, hit <keycode>Enter</keycode> to continue the boot
>+	    correct console, hit <keycap>Enter</keycap> to continue the boot
> 	    process.</para>
> 
> 	  <para>If you want the serial console but you do not see the prompt
> 	    on the serial terminal, something is wrong with your settings.  In
>-	    the meantime, you enter <option>-h</option> and hit Enter/Return
>+	    the meantime, you enter <option>-h</option> and hit <keycap>Enter</keycap> or <keycap>Return</keycap>
> 	    (if possible) to tell the boot block (and then the boot loader and
> 	    the kernel) to choose the serial port for the console. Once the
> 	    system is up, go back and check what went wrong.</para>

Actions: View | Diff

Attachments on bug 123423: 86905