FreeBSD Bugzilla – Attachment 8759 Details for
Bug 18200
3com 3c509b recognized twice during boot
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
dmesg.boot
dmesg.boot (text/plain; charset=us-ascii), 7.38 KB, created by
beirne
on 2000-04-30 06:43:08 UTC
(
hide
)
Description:
dmesg.boot
Filename:
MIME Type:
Creator:
beirne
Created:
2000-04-30 06:43:08 UTC
Size:
7.38 KB
patch
obsolete
>Copyright (c) 1992-2000 The FreeBSD Project. >Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. >FreeBSD 4.0-RELEASE #0: Mon Mar 20 22:50:22 GMT 2000 > root@monster.cdrom.com:/usr/src/sys/compile/GENERIC >Calibrating clock(s) ... i8254 clock: 1193890 Hz >CLK_USE_I8254_CALIBRATION not specified - using default frequency >Timecounter "i8254" frequency 1193182 Hz >CPU: AMD Am5x86 Write-Back (486-class CPU) > Origin = "AuthenticAMD" Id = 0x4f4 Stepping = 4 > Features=0x1<FPU> >real memory = 16777216 (16384K bytes) >Physical memory chunk(s): >0x00001000 - 0x0009ffff, 651264 bytes (159 pages) >0x003d9000 - 0x00ff7fff, 12709888 bytes (3103 pages) >avail memory = 12656640 (12360K bytes) >bios32: Found BIOS32 Service Directory header at 0xc00f6f10 >bios32: Entry = 0xf6f20 (c00f6f20) Rev = 0 Len = 1 >pcibios: PCI BIOS entry at 0x6f41 >pnpbios: Found PnP BIOS data at 0xc00f9500 >pnpbios: Entry = f0000:8cbe Rev = 1.0 >Other BIOS signatures found: >ACPI: 00000000 >Preloaded elf kernel "kernel" at 0xc03c0000. >md0: Malloc disk >Creating DISK md0 >Math emulator present >pci_open(1): mode 1 addr port (0x0cf8) is 0x80009040 >pci_open(1a): mode1res=0x80000000 (0x80000000) >pci_cfgcheck: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [class=060000] [hdr=00] is there (id=88811060) >npx0: <math processor> on motherboard >npx0: INT 16 interface >pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 >pci_open(1a): mode1res=0x80000000 (0x80000000) >pci_cfgcheck: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [class=060000] [hdr=00] is there (id=88811060) >pcib0: <Host to PCI bridge> on motherboard >found-> vendor=0x1060, dev=0x8881, revid=0x01 > class=06-00-00, hdrtype=0x00, mfdev=0 > subordinatebus=0 secondarybus=0 >found-> vendor=0x1060, dev=0x886a, revid=0x0d > class=06-01-00, hdrtype=0x00, mfdev=1 > subordinatebus=0 secondarybus=0 >found-> vendor=0x1060, dev=0x673a, revid=0x0d > class=01-01-00, hdrtype=0x00, mfdev=1 > subordinatebus=0 secondarybus=0 >pci0: <PCI bus> on pcib0 >isab0: <UMC UM8886 ISA Bridge with EIDE> at device 18.0 on pci0 >isa0: <ISA bus> on isab0 >atapci0: <Unknown PCI ATA controller (generic mode)> at device 18.1 on pci0 >atapci0: Busmastering DMA not supported >ata2: probe allocation failed >Trying Read_Port at 203 >TCM5095: adding irq mask 0x9ea8 >TCM5095: adding io range 0x210-0x3ef, size=0x10, align=0x10 >isa0: if_ep: <3Com 3C509-TPO EtherLink III> at port 0x300-0x310 irq 11 >isa_probe_children: disabling PnP devices >isa_probe_children: probing non-PnP devices >fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 >fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000 >ata0: mask=03 status0=50 status1=10 >ata0: mask=03 status0=50 status1=10 >ata0: devices = 0x9 >ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 >ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 >ata1: mask=00 status0=ff status1=ff >ata1: probe allocation failed >bt0: Failed Status Reg Test - ff >bt_isa_probe: Probe failed at 0x330 >bt0: Failed Status Reg Test - ff >bt_isa_probe: Probe failed at 0x334 >bt0: Failed Status Reg Test - ff >bt_isa_probe: Probe failed at 0x230 >bt0: Failed Status Reg Test - ff >bt_isa_probe: Probe failed at 0x234 >bt0: Failed Status Reg Test - ff >bt_isa_probe: Probe failed at 0x130 >bt0: Failed Status Reg Test - ff >bt_isa_probe: Probe failed at 0x134 >aha0: status reg test failed ff >aha0: status reg test failed ff >aha0: status reg test failed ff >aha0: status reg test failed ff >aha0: status reg test failed ff >aha0: status reg test failed ff >atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >atkbd: the current kbd controller command byte 0045 >atkbd: keyboard ID 0x41ab (2) >kbdc: RESET_KBD return code:00fa >kbdc: RESET_KBD status:00aa >kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 >psm0: current command byte:0045 >kbdc: TEST_AUX_PORT status:0000 >kbdc: RESET_AUX return code:ffffffff >kbdc: RESET_AUX return code:ffffffff >kbdc: RESET_AUX return code:ffffffff >kbdc: DIAGNOSE status:0055 >kbdc: TEST_KBD_PORT status:0000 >psm0: failed to reset the aux device. >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >fb0: vga0, vga, type:VGA (5), flags:0x7007f >fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 >fb0: init mode:24, bios mode:3, current mode:24 >fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k >VGA parameters upon power-up >50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 >bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 >b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c >3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff >VGA parameters in BIOS for mode 24 >50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 >bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 >b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c >3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff >EGA/VGA parameters to be used for mode 24 >50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 >bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 >b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c >3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff >sc0: <System console> on isa0 >sc0: VGA <16 virtual consoles, flags=0x200> >sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) >pcic1: not probed (disabled) >sio0: irq maps: 0x41 0x51 0x41 0x41 >sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >sio0: type 16550A >sio1: irq maps: 0x41 0x49 0x41 0x41 >sio1 at port 0x2f8-0x2ff irq 3 on isa0 >sio1: type 16550A >sio2: not probed (disabled) >sio3: not probed (disabled) >ppc0: parallel port found at 0x378 >ppc0: SPP >ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 >ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode >ppi0: <Parallel I/O> on ppbus0 >lpt0: <Printer> on ppbus0 >lpt0: Interrupt-driven port >plip0: <PLIP network interface> on ppbus0 >bpf: lp0 attached >ep0: <3Com 3C509-TPO EtherLink III> at port 0x300-0x30f irq 11 on isa0 >ep0: eeprom failed to come ready. >ep0: eeprom failed to come ready. >ep0: eeprom failed to come ready. >ep0: eeprom failed to come ready. >ep0: eeprom failed to come ready. >ep0: Ethernet address 00:00:00:00:00:00 >bpf: ep0 attached >isa_probe_children: probing PnP devices >ep1: <3Com 3C509B-TPO EtherLink III (PnP)> at port 0x210-0x21f irq 5 on isa0 >ep1: Ethernet address 00:10:5a:1c:c5:13 >ep1: supplying EUI64: 00:10:5a:ff:fe:1c:c5:13 >bpf: ep1 attached >BIOS Geometries: > 0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors > 1:01300311 0..304=305 cylinders, 0..3=4 heads, 1..17=17 sectors > 2:01300311 0..304=305 cylinders, 0..3=4 heads, 1..17=17 sectors > 3:01300311 0..304=305 cylinders, 0..3=4 heads, 1..17=17 sectors > 0 accounted for >Device configuration finished. >bpf: sl0 attached >bpf: ppp0 attached >new masks: bio 40084040, tty 4003009a, net 400708ba >bpf: lo0 attached >bpf: gif0 attached >bpf: gif1 attached >bpf: gif2 attached >bpf: gif3 attached >bpf: stf0 attached >bpf: faith0 attached >ad0: <ST34321A/3.15> ATA-4 disk at ata0 as master >ad0: 4103MB (8404830 sectors), 8894 cyls, 15 heads, 63 S/T, 512 B/S >ad0: 16 secs/int, 1 depth queue, BIOSPIO >ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 >Creating DISK ad0 >Creating DISK wd0 >ata0-slave: piomode=3 dmamode=-1 udmamode=-1 dmaflag=0 >acd0: <MATSHITA CR-571/1.0d> CDROM drive at ata0 as slave >acd0: read 344KB/s (344KB/s), 256KB buffer, BIOSPIO >acd0: Reads: CD-DA >acd0: Audio: play, 256 volume levels >acd0: Mechanism: ejectable tray >acd0: Medium: CD-ROM unknown medium, unlocked >Mounting root from ufs:/dev/ad0s1a >ad0s1: type 0xa5, start 63, end = 8404829, size 8404767 : OK >start_init: trying /sbin/init
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 18200
: 8759