Attachment 89880 Details for Bug 126925 – dmesg.sony-vaio-PCG4N1M

dmesg.sony-vaio-PCG4N1M

dmesg.sony-vaio-PCG4N1M (text/plain), 9.31 KB, created by Gavin Atkinson on 2008-08-28 21:30:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gavin Atkinson

Created: 2008-08-28 21:30:03 UTC

Size: 9.31 KB

patch

obsolete

>Copyright (c) 1992-2008 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 7.0-STABLE-200807 #0: Mon Jul 14 19:04:17 UTC 2008
>    root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Core(TM)2 CPU         U7600  @ 1.20GHz (1197.01-MHz K8-class CPU)
>  Origin = "GenuineIntel"  Id = 0x6f2  Stepping = 2
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
>  AMD Features=0x20100800<SYSCALL,NX,LM>
>  AMD Features2=0x1<LAHF>
>  Cores per package: 2
>usable memory = 2120142848 (2021 MB)
>avail memory  = 2045775872 (1951 MB)
>ACPI APIC Table: <Sony VAIO>
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
>ioapic0: Changing APIC ID to 1
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>kbd1 at kbdmux0
>ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>acpi0: <Sony> on motherboard
>acpi0: [ITHREAD]
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
>acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xfc200000-0xfc27ffff,0xd0000000-0xdfffffff,0xfc300000-0xfc33ffff irq 16 at device 2.0 on pci0
>agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
>agp0: detected 7932k stolen memory
>agp0: aperture size is 256M
>vgapci1: <VGA-compatible display> mem 0xfc280000-0xfc2fffff at device 2.1 on pci0
>pci0: <multimedia> at device 27.0 (no driver attached)
>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
>pci2: <ACPI PCI bus> on pcib1
>mskc0: <Marvell Yukon 88E8055 Gigabit Ethernet> port 0x2000-0x20ff mem 0xf6000000-0xf6003fff irq 16 at device 0.0 on pci2
>msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0
>msk0: Ethernet address: 00:1a:80:d3:51:b5
>miibus0: <MII bus> on msk0
>e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
>e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
>mskc0: [FILTER]
>pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
>pci3: <ACPI PCI bus> on pcib2
>pci3: <network> at device 0.0 (no driver attached)
>pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
>pci4: <ACPI PCI bus> on pcib3
>pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
>pci8: <ACPI PCI bus> on pcib4
>uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 17 at device 29.0 on pci0
>uhci0: [GIANT-LOCKED]
>uhci0: [ITHREAD]
>usb0: <UHCI (generic) USB controller> on uhci0
>usb0: USB revision 1.0
>uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device 29.1 on pci0
>uhci1: [GIANT-LOCKED]
>uhci1: [ITHREAD]
>usb1: <UHCI (generic) USB controller> on uhci1
>usb1: USB revision 1.0
>uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
>uhub1: 2 ports with 2 removable, self powered
>uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 21 at device 29.2 on pci0
>uhci2: [GIANT-LOCKED]
>uhci2: [ITHREAD]
>usb2: <UHCI (generic) USB controller> on uhci2
>usb2: USB revision 1.0
>uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
>uhub2: 2 ports with 2 removable, self powered
>uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 17 at device 29.3 on pci0
>uhci3: [GIANT-LOCKED]
>uhci3: [ITHREAD]
>usb3: <UHCI (generic) USB controller> on uhci3
>usb3: USB revision 1.0
>uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
>uhub3: 2 ports with 2 removable, self powered
>ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfc544000-0xfc5443ff irq 23 at device 29.7 on pci0
>ehci0: [GIANT-LOCKED]
>ehci0: [ITHREAD]
>usb4: EHCI version 1.0
>usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
>usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
>usb4: USB revision 2.0
>uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
>uhub4: 8 ports with 8 removable, self powered
>umass0: <vendor 0x054c Sony VAIO USB Internal Optical Drive, class 0/0, rev 2.00/0.06, addr 2> on uhub4
>uhub5: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 3> on uhub4
>uhub5: single transaction translator
>uhub5: 3 ports with 0 removable, self powered
>ugen0: <Broadcom Corp BCM2046 Bluetooth Device, class 224/1, rev 2.00/1.43, addr 4> on uhub5
>ugen1: <vendor 0x05ca product 0x183a, class 239/2, rev 2.00/1.00, addr 5> on uhub4
>pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci9: <ACPI PCI bus> on pcib5
>cbb0: <RF5C476 PCI-CardBus Bridge> at device 4.0 on pci9
>cardbus0: <CardBus bus> on cbb0
>pccard0: <16-bit PCCard bus> on cbb0
>cbb0: [ITHREAD]
>fwohci0: <1394 Open Host Controller Interface> mem 0xfc100000-0xfc1007ff irq 21 at device 4.1 on pci9
>fwohci0: [FILTER]
>fwohci0: OHCI version 1.0 (ROM=1)
>fwohci0: No. of Isochronous channels is 4.
>fwohci0: EUI64 08:00:46:03:02:ac:0e:b9
>fwohci0: Phy 1394a available S400, 1 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>dcons_crom0: <dcons configuration ROM> on firewire0
>dcons_crom0: bus_addr 0x18fc000
>fwe0: <Ethernet over FireWire> on firewire0
>if_fwe0: Fake Ethernet address: 0a:00:46:ac:0e:b9
>fwe0: Ethernet address: 0a:00:46:ac:0e:b9
>fwip0: <IP over FireWire> on firewire0
>fwip0: Firewire address: 08:00:46:03:02:ac:0e:b9 @ 0xfffe00000000, S400, maxrec 2048
>sbp0: <SBP-2/SCSI over FireWire> on firewire0
>fwohci0: Initiate bus reset
>fwohci0: BUS reset
>fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
>pci9: <base peripheral> at device 4.3 (no driver attached)
>pci9: <base peripheral> at device 4.4 (no driver attached)
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
>ata0: <ATA channel 0> on atapci0
>ata0: [ITHREAD]
>ata1: <ATA channel 1> on atapci0
>ata1: [ITHREAD]
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>Timecounter "HPET" frequency 14318180 Hz quality 900
>cpu0: <ACPI CPU> on acpi0
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>p4tcc0: <CPU Frequency Thermal Control> on cpu0
>cpu1: <ACPI CPU> on acpi0
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>p4tcc1: <CPU Frequency Thermal Control> on cpu1
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_button0: <Power Button> on acpi0
>acpi_tz0: <Thermal Zone> on acpi0
>acpi_tz1: <Thermal Zone> on acpi0
>acpi_tz2: <Thermal Zone> on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>atkbd0: [ITHREAD]
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: [GIANT-LOCKED]
>psm0: [ITHREAD]
>psm0: model GlidePoint, device ID 0
>battery0: <ACPI Control Method Battery> on acpi0
>acpi_acad0: <AC Adapter> on acpi0
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff on isa0
>ppc0: cannot reserve I/O port range
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 8250 or not responding
>sio0: [FILTER]
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>ugen2: <TouchStrip Fingerprint Sensor, class 0/0, rev 1.00/0.01, addr 2> on uhub3
>Timecounters tick every 1.000 msec
>firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
>firewire0: bus manager 0 (me)
>md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80c1f400
>ad0: 114473MB <TOSHIBA MK1214GAH BW003A> at ata0-master UDMA100
>GEOM_LABEL: Label for provider ad0s1 is ntfs/Recovery Partition.
>GEOM_LABEL: Label for provider ad0s2 is ntfs/VAIO.
>SMP: AP CPU #1 Launched!
>cd0 at umass-sim0 bus 0 target 0 lun 0
>cd0: <MATSHITA DVD-RAM UJ862PS 1.20> Removable CD-ROM SCSI-0 device 
>cd0: 40.000MB/s transfers
>cd0: cd present [140773 x 2048 byte records]
>(cd0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 2 25 e4 0 0 1 0 
>(cd0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
>(cd0:umass-sim0:0:0:0): SCSI Status: Check Condition
>(cd0:umass-sim0:0:0:0): ILLEGAL REQUEST csi:0,1d,0,0 asc:64,0
>(cd0:umass-sim0:0:0:0): Illegal mode for this track
>(cd0:umass-sim0:0:0:0): Unretryable error
>(cd0:umass-sim0:0:0:0): cddone: got error 0x6 back
>GEOM_LABEL: Label for provider cd0 is iso9660/FreeBSD_LiveFS.
>Trying to mount root from ufs:/dev/md0
>ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x18a0-0x18bf at device 31.3 on pci0
>ichsmb0: can't get IRQ
>device_attach: ichsmb0 attach returned 6
>pcm0: <Intel 82801G High Definition Audio Controller> mem 0xfc540000-0xfc543fff irq 19 at device 27.0 on pci0
>pcm0: [ITHREAD]
>pcm0: <HDA Codec: Realtek ALC262>
>pcm0: <HDA Driver Revision: 20071129_0050>

Actions: View

Attachments on bug 126925: 89880 | 89881