Attachment 91488 Details for Bug 128847 – file.txt

file.txt

file.txt (text/plain), 7.47 KB, created by Patrick on 2008-11-13 18:10:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Patrick

Created: 2008-11-13 18:10:06 UTC

Size: 7.47 KB

patch

obsolete

>Copyright (c) 1992-2008 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
>    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (1202.73-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x4400<CNXT-ID,xTPR>
>  Logical CPUs per core: 2
>real memory  = 536805376 (511 MB)
>avail memory = 503001088 (479 MB)
>ACPI APIC Table: <IntelR AWRDACPI>
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
>ioapic0: Changing APIC ID to 2
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>kbd1 at kbdmux0
>ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
>acpi0: <IntelR AWRDACPI> on motherboard
>acpi0: [ITHREAD]
>acpi0: Power Button (fixed)
>acpi0: reservation of 0, a0000 (3) failed
>acpi0: reservation of 100000, 1fef0000 (3) failed
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>cpu0: <ACPI CPU> on acpi0
>p4tcc0: <CPU Frequency Thermal Control> on cpu0
>cpu1: <ACPI CPU> on acpi0
>p4tcc1: <CPU Frequency Thermal Control> on cpu1
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>agp0: <Intel 82865 host to AGP bridge> on hostb0
>pcib1: <PCI-PCI bridge> at device 1.0 on pci0
>pci1: <PCI bus> on pcib1
>nvidia0: <GeForce FX 5600> mem 0xf0000000-0xf0ffffff,0xe8000000-0xefffffff irq 16 at device 0.0 on pci1
>nvidia0: [GIANT-LOCKED]
>nvidia0: [ITHREAD]
>uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xac00-0xac1f irq 16 at device 29.0 on pci0
>uhci0: [GIANT-LOCKED]
>uhci0: [ITHREAD]
>usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
>usb0: USB revision 1.0
>uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xa000-0xa01f irq 19 at device 29.1 on pci0
>uhci1: [GIANT-LOCKED]
>uhci1: [ITHREAD]
>usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
>usb1: USB revision 1.0
>uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
>uhub1: 2 ports with 2 removable, self powered
>uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xa400-0xa41f irq 18 at device 29.2 on pci0
>uhci2: [GIANT-LOCKED]
>uhci2: [ITHREAD]
>usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
>usb2: USB revision 1.0
>uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
>uhub2: 2 ports with 2 removable, self powered
>uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xa800-0xa81f irq 16 at device 29.3 on pci0
>uhci3: [GIANT-LOCKED]
>uhci3: [ITHREAD]
>usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
>usb3: USB revision 1.0
>uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
>uhub3: 2 ports with 2 removable, self powered
>ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xf4000000-0xf40003ff irq 23 at device 29.7 on pci0
>ehci0: [GIANT-LOCKED]
>ehci0: [ITHREAD]
>usb4: EHCI version 1.0
>usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
>usb4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
>usb4: USB revision 2.0
>uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
>uhub4: 8 ports with 8 removable, self powered
>pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>fwohci0: <Texas Instruments TSB43AB23> mem 0xf3005000-0xf30057ff,0xf3000000-0xf3003fff irq 17 at device 1.0 on pci2
>fwohci0: [FILTER]
>fwohci0: OHCI version 1.10 (ROM=1)
>fwohci0: No. of Isochronous channels is 4.
>fwohci0: EUI64 00:50:8d:00:00:f8:21:82
>fwohci0: Phy 1394a available S400, 3 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>dcons_crom0: <dcons configuration ROM> on firewire0
>dcons_crom0: bus_addr 0x1a68000
>fwe0: <Ethernet over FireWire> on firewire0
>if_fwe0: Fake Ethernet address: 02:50:8d:f8:21:82
>fwe0: Ethernet address: 02:50:8d:f8:21:82
>fwip0: <IP over FireWire> on firewire0
>fwip0: Firewire address: 00:50:8d:00:00:f8:21:82 @ 0xfffe00000000, S400, maxrec 2048
>sbp0: <SBP-2/SCSI over FireWire> on firewire0
>fwohci0: Initiate bus reset
>fwohci0: BUS reset
>fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
>rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem 0xf3004000-0xf30040ff irq 18 at device 2.0 on pci2
>miibus0: <MII bus> on rl0
>rlphy0: <RealTek internal media interface> PHY 0 on miibus0
>rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>rl0: Ethernet address: 00:50:8d:f9:21:82
>rl0: [ITHREAD]
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
>ata0: <ATA channel 0> on atapci0
>ata0: [ITHREAD]
>ata1: <ATA channel 1> on atapci0
>ata1: [ITHREAD]
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>pci0: <multimedia, audio> at device 31.5 (no driver attached)
>acpi_tz0: <Thermal Zone> on acpi0
>acpi_tz0: _PSV value is absurd, ignored (-266.7C)
>fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
>fdc0: [FILTER]
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>sio0: type 16550A
>sio0: [FILTER]
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>atkbd0: [ITHREAD]
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: [GIANT-LOCKED]
>psm0: [ITHREAD]
>psm0: model IntelliMouse, device ID 3
>pmtimer0 on isa0
>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
>ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
>ppbus0: <Parallel port bus> on ppc0
>ppbus0: [ITHREAD]
>plip0: <PLIP network interface> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>ppc0: [GIANT-LOCKED]
>ppc0: [ITHREAD]
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounters tick every 1.000 msec
>hptrr: no controller detected.
>firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
>firewire0: bus manager 0 (me)
>ad0: 286188MB <Maxtor 6B300R0 BAH41B70> at ata0-master UDMA100
>acd0: CDRW <LG CD-RW CED-8120B/2.00> at ata0-slave PIO4
>acpi_tz0: _PSV value is absurd, ignored (-266.7C)
>acpi_tz0: _PSV value is absurd, ignored (-266.7C)
>SMP: AP CPU #1 Launched!
>Trying to mount root from ufs:/dev/ad0s3a
>WARNING: / was not properly dismounted
>WARNING: /tmp was not properly dismounted
>WARNING: /usr was not properly dismounted
>WARNING: /var was not properly dismounted
>umass0: <SanDisk Corporation Cruzer Mini, class 0/0, rev 2.00/0.10, addr 2> on uhub4
>da0 at umass-sim0 bus 0 target 0 lun 0
>da0: <SanDisk Cruzer Mini 0.1> Removable Direct Access SCSI-2 device 
>da0: 40.000MB/s transfers
>da0: 244MB (501759 512 byte sectors: 64H 32S/T 244C)
>GEOM_LABEL: Label for provider da0s1 is msdosfs/WWMPCDD_USB.
>GEOM_LABEL: Label msdosfs/WWMPCDD_USB removed.

Actions: View

Attachments on bug 128847: 91488