Attachment 93533 Details for Bug 131456 – file.txt

file.txt

file.txt (text/plain), 54.90 KB, created by Dirk Rodemer on 2009-02-07 01:00:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dirk Rodemer

Created: 2009-02-07 01:00:18 UTC

Size: 54.90 KB

patch

obsolete

>Copyright (c) 1992-2009 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 7.1-RELEASE-p2 #1: Fri Feb  6 01:36:54 CET 2009
>    root@www.rodemer.net:/usr/src/sys/amd64/compile/WWW
>Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80c5a000.
>Calibrating clock(s) ... i8254 clock: 1193258 Hz
>CLK_USE_I8254_CALIBRATION not specified - using default frequency
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Calibrating TSC clock ... TSC clock: 2500100101 Hz
>CPU: AMD Athlon(tm) Dual Core Processor 4850e (2500.10-MHz K8-class CPU)
>  Origin = "AuthenticAMD"  Id = 0x60fb2  Stepping = 2
>  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x2001<SSE3,CX16>
>  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
>  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
>  Cores per package: 2
>L1 2MB data TLB: 8 entries, fully associative
>L1 2MB instruction TLB: 8 entries, fully associative
>L1 4KB data TLB: 32 entries, fully associative
>L1 4KB instruction TLB: 32 entries, fully associative
>L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>L2 2MB unified TLB: 0 entries, disabled/not present
>L2 4KB data TLB: 512 entries, 4-way associative
>L2 4KB instruction TLB: 512 entries, 4-way associative
>L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
>usable memory = 925777920 (882 MB)
>Physical memory chunk(s):
>0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
>0x0000000000d57000 - 0x000000003651bfff, 897339392 bytes (219077 pages)
>avail memory  = 891576320 (850 MB)
>ACPI APIC Table: <7302MS A7302200>
>INTR: Adding local APIC 1 as a target
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
>APIC: CPU 0 has ACPI ID 1
>APIC: CPU 1 has ACPI ID 2
>ULE: setup cpu group 0
>ULE: setup cpu 0
>ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
>ULE: setup cpu group 1
>ULE: setup cpu 1
>ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
>ACPI: RSDP @ 0x0xfa030/0x0014 (v  0 ACPIAM)
>ACPI: RSDT @ 0x0x37fa0000/0x003C (v  1 7302MS A7302200 0x20080416 MSFT 0x00000097)
>ACPI: FACP @ 0x0x37fa0200/0x0084 (v  2 7302MS A7302200 0x20080416 MSFT 0x00000097)
>ACPI: DSDT @ 0x0x37fa05c0/0x48E0 (v  1  A7302 A7302200 0x00000200 INTL 0x20051117)
>ACPI: FACS @ 0x0x37fae000/0x0040
>ACPI: APIC @ 0x0x37fa0390/0x006C (v  1 7302MS A7302200 0x20080416 MSFT 0x00000097)
>ACPI: MCFG @ 0x0x37fa0400/0x003C (v  1 7302MS OEMMCFG  0x20080416 MSFT 0x00000097)
>ACPI: SLIC @ 0x0x37fa0440/0x0176 (v  1 7302MS A7302200 0x20080416 MSFT 0x00000097)
>ACPI: OEMB @ 0x0x37fae040/0x0071 (v  1 7302MS A7302200 0x20080416 MSFT 0x00000097)
>ACPI: HPET @ 0x0x37fa4ea0/0x0038 (v  1 7302MS OEMHPET  0x20080416 MSFT 0x00000097)
>MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
>ioapic0: Routing external 8259A's -> intpin 0
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Interrupt override: source 9, irq 9
>ioapic0: intpin 9 trigger: level
>ioapic0: intpin 9 polarity: low
>ioapic0 <Version 2.1> irqs 0-23 on motherboard
>cpu0 BSP:
>     ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
>ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
>wlan_amrr: <AMRR Transmit Rate Control Algorithm>
>wlan: <802.11 Link Layer>
>null: <null device, zero device>
>random: <entropy source, Software, Yarrow>
>nfslock: pseudo-device
>kbd: new array size 4
>kbd1 at kbdmux0
>mem: <memory>
>io: <I/O>
>ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Feb  6 2009 01:36:45)
>acpi0: <7302MS A7302200> on motherboard
>ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
>acpi0: [MPSAFE]
>acpi0: [ITHREAD]
>acpi0: Power Button (fixed)
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi0: reservation of ffb80000, 80000 (3) failed
>acpi0: reservation of 0, a0000 (3) failed
>acpi0: reservation of 100000, 37f00000 (3) failed
>ACPI HPET table warning: Sequence is non-zero (2)
>ACPI timer: 0/3 1/2 0/3 0/3 0/3 1/2 0/3 0/3 0/3 0/3 -> 2
>Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
>acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    7   N     0  4 7 10 11 12 14 15
>  Validation          0    7   N     0  4 7 10 11 12 14 15
>  After Disable       0  255   N     0  4 7 10 11 12 14 15
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  4 7 10 11 12 14 15
>  Validation          0   10   N     0  4 7 10 11 12 14 15
>  After Disable       0  255   N     0  4 7 10 11 12 14 15
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  4 7 10 11 12 14 15
>  Validation          0   10   N     0  4 7 10 11 12 14 15
>  After Disable       0  255   N     0  4 7 10 11 12 14 15
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  4 7 10 11 12 14 15
>  Validation          0   11   N     0  4 7 10 11 12 14 15
>  After Disable       0  255   N     0  4 7 10 11 12 14 15
>pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 12 14 15
>  Validation          0  255   N     0  4 7 10 11 12 14 15
>  After Disable       0  255   N     0  4 7 10 11 12 14 15
>pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 12 14 15
>  Validation          0  255   N     0  4 7 10 11 12 14 15
>  After Disable       0  255   N     0  4 7 10 11 12 14 15
>pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  4 7 10 11 12 14 15
>  Validation          0   11   N     0  4 7 10 11 12 14 15
>  After Disable       0  255   N     0  4 7 10 11 12 14 15
>pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 12 14 15
>  Validation          0  255   N     0  4 7 10 11 12 14 15
>  After Disable       0  255   N     0  4 7 10 11 12 14 15
>acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
>Timecounter "HPET" frequency 14318180 Hz quality 900
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x1002, dev=0x7911, revid=0x00
>	domain=0, bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1002, dev=0x7912, revid=0x00
>	domain=0, bus=0, slot=1, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1002, dev=0x7915, revid=0x00
>	domain=0, bus=0, slot=5, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>found->	vendor=0x1002, dev=0x4390, revid=0x00
>	domain=0, bus=0, slot=17, func=0
>	class=01-01-8f, hdrtype=0x00, mfdev=0
>	cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 4 messages, 64 bit
>	map[10]: type I/O Port, range 32, base 0xc000, size  3, enabled
>	map[14]: type I/O Port, range 32, base 0xb000, size  2, enabled
>	map[18]: type I/O Port, range 32, base 0xa000, size  3, enabled
>	map[1c]: type I/O Port, range 32, base 0x9000, size  2, enabled
>	map[20]: type I/O Port, range 32, base 0x8000, size  4, enabled
>	map[24]: type Memory, range 32, base 0xfe8ffc00, size 10, enabled
>pcib0: matched entry for 0.17.INTA
>pcib0: slot 17 INTA hardwired to IRQ 22
>found->	vendor=0x1002, dev=0x4397, revid=0x00
>	domain=0, bus=0, slot=18, func=0
>	class=0c-03-10, hdrtype=0x00, mfdev=1
>	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=7
>	map[10]: type Memory, range 32, base 0xfe8fe000, size 12, enabled
>pcib0: matched entry for 0.18.INTA
>pcib0: slot 18 INTA hardwired to IRQ 16
>found->	vendor=0x1002, dev=0x4398, revid=0x00
>	domain=0, bus=0, slot=18, func=1
>	class=0c-03-10, hdrtype=0x00, mfdev=0
>	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=7
>	map[10]: type Memory, range 32, base 0xfe8fd000, size 12, enabled
>pcib0: matched entry for 0.18.INTA
>pcib0: slot 18 INTA hardwired to IRQ 16
>found->	vendor=0x1002, dev=0x4396, revid=0x00
>	domain=0, bus=0, slot=18, func=2
>	class=0c-03-20, hdrtype=0x00, mfdev=0
>	cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=10
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	map[10]: type Memory, range 32, base 0xfe8ff800, size  8, enabled
>pcib0: matched entry for 0.18.INTB
>pcib0: slot 18 INTB hardwired to IRQ 17
>found->	vendor=0x1002, dev=0x4397, revid=0x00
>	domain=0, bus=0, slot=19, func=0
>	class=0c-03-10, hdrtype=0x00, mfdev=1
>	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	map[10]: type Memory, range 32, base 0xfe8fc000, size 12, enabled
>pcib0: matched entry for 0.19.INTA
>pcib0: slot 19 INTA hardwired to IRQ 18
>found->	vendor=0x1002, dev=0x4398, revid=0x00
>	domain=0, bus=0, slot=19, func=1
>	class=0c-03-10, hdrtype=0x00, mfdev=0
>	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	map[10]: type Memory, range 32, base 0xfe8fb000, size 12, enabled
>pcib0: matched entry for 0.19.INTA
>pcib0: slot 19 INTA hardwired to IRQ 18
>found->	vendor=0x1002, dev=0x4396, revid=0x00
>	domain=0, bus=0, slot=19, func=2
>	class=0c-03-20, hdrtype=0x00, mfdev=0
>	cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=11
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	map[10]: type Memory, range 32, base 0xfe8ff400, size  8, enabled
>pcib0: matched entry for 0.19.INTB
>pcib0: slot 19 INTB hardwired to IRQ 19
>found->	vendor=0x1002, dev=0x4385, revid=0x3a
>	domain=0, bus=0, slot=20, func=0
>	class=0c-05-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0403, statreg=0xd230, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1002, dev=0x439c, revid=0x00
>	domain=0, bus=0, slot=20, func=1
>	class=01-01-8a, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	MSI supports 2 messages
>	map[20]: type I/O Port, range 32, base 0xff00, size  4, enabled
>found->	vendor=0x1002, dev=0x4383, revid=0x00
>	domain=0, bus=0, slot=20, func=2
>	class=04-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=7
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type Memory, range 64, base 0xfe8f4000, size 14, enabled
>pcib0: matched entry for 0.20.INTA
>pcib0: slot 20 INTA hardwired to IRQ 16
>found->	vendor=0x1002, dev=0x439d, revid=0x00
>	domain=0, bus=0, slot=20, func=3
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1002, dev=0x4384, revid=0x00
>	domain=0, bus=0, slot=20, func=4
>	class=06-04-01, hdrtype=0x01, mfdev=1
>	cmdreg=0x0105, statreg=0x02a0, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1002, dev=0x4399, revid=0x00
>	domain=0, bus=0, slot=20, func=5
>	class=0c-03-10, hdrtype=0x00, mfdev=0
>	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=10
>	map[10]: type Memory, range 32, base 0xfe8fa000, size 12, enabled
>pcib0: matched entry for 0.20.INTC
>pcib0: slot 20 INTC hardwired to IRQ 18
>found->	vendor=0x1022, dev=0x1100, revid=0x00
>	domain=0, bus=0, slot=24, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1101, revid=0x00
>	domain=0, bus=0, slot=24, func=1
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1102, revid=0x00
>	domain=0, bus=0, slot=24, func=2
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1103, revid=0x00
>	domain=0, bus=0, slot=24, func=3
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib1:   I/O decode        0xd000-0xdfff
>pcib1:   memory decode     0xfe900000-0xfeafffff
>pcib1:   prefetched decode 0xf0000000-0xf7ffffff
>pci1: <ACPI PCI bus> on pcib1
>pci1: domain=0, physical bus=1
>found->	vendor=0x1002, dev=0x796e, revid=0x00
>	domain=0, bus=1, slot=5, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Prefetchable Memory, range 64, base 0xf0000000, size 27, enabled
>pcib1: requested memory range 0xf0000000-0xf7ffffff: good
>	map[18]: type Memory, range 64, base 0xfeaf0000, size 16, enabled
>pcib1: requested memory range 0xfeaf0000-0xfeafffff: good
>	map[20]: type I/O Port, range 32, base 0xd000, size  8, enabled
>pcib1: requested I/O range 0xd000-0xd0ff: in range
>	map[24]: type Memory, range 32, base 0xfe900000, size 20, enabled
>pcib1: requested memory range 0xfe900000-0xfe9fffff: good
>pcib1: matched entry for 1.5.INTA
>pcib1: slot 5 INTA hardwired to IRQ 18
>vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xf0000000-0xf7ffffff,0xfeaf0000-0xfeafffff,0xfe900000-0xfe9fffff irq 18 at device 5.0 on pci1
>pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
>pcib2:   domain            0
>pcib2:   secondary bus     2
>pcib2:   subordinate bus   2
>pcib2:   I/O decode        0xe000-0xefff
>pcib2:   memory decode     0xfeb00000-0xfebfffff
>pcib2:   prefetched decode 0xfdf00000-0xfdffffff
>pci2: <ACPI PCI bus> on pcib2
>pci2: domain=0, physical bus=2
>found->	vendor=0x10ec, dev=0x8168, revid=0x02
>	domain=0, bus=2, slot=0, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 3  supports D0 D1 D2 D3  current D0
>	MSI supports 2 messages, 64 bit
>	MSI-X supports 2 messages in map 0x20
>	map[10]: type I/O Port, range 32, base 0xe800, size  8, enabled
>pcib2: requested I/O range 0xe800-0xe8ff: in range
>	map[18]: type Prefetchable Memory, range 64, base 0xfdfff000, size 12, enabled
>pcib2: requested memory range 0xfdfff000-0xfdffffff: good
>	map[20]: type Prefetchable Memory, range 64, base 0xfdfe0000, size 16, enabled
>pcib2: requested memory range 0xfdfe0000-0xfdfeffff: good
>pcib2: matched entry for 2.0.INTA
>pcib2: slot 0 INTA hardwired to IRQ 17
>re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 0.0 on pci2
>re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfdfff000
>re0: MSI count : 2
>re0: Chip rev. 0x3c000000
>re0: MAC rev. 0x00400000
>miibus0: <MII bus> on re0
>rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
>rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
>re0: bpf attached
>re0: Ethernet address: 00:21:85:5c:ae:a7
>ioapic0: routing intpin 17 (PCI IRQ 17) to vector 49
>re0: [MPSAFE]
>re0: [FILTER]
>atapci0: <ATI IXP700 SATA300 controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe8ffc00-0xfe8fffff irq 22 at device 17.0 on pci0
>atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8000
>atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe8ffc00
>ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50
>atapci0: [MPSAFE]
>atapci0: [ITHREAD]
>atapci0: AHCI Version 01.10 controller with 4 ports detected
>ata2: <ATA channel 0> on atapci0
>ata2: SATA connect time=0ms
>ata2: SIGNATURE: 00000101
>ata2: ahci_reset devices=0x1<ATA_MASTER>
>ata2: [MPSAFE]
>ata2: [ITHREAD]
>ata3: <ATA channel 1> on atapci0
>ata3: SATA connect status=00000000
>ata3: ahci_reset devices=0x0
>ata3: [MPSAFE]
>ata3: [ITHREAD]
>ata4: <ATA channel 2> on atapci0
>ata4: SATA connect status=00000000
>ata4: ahci_reset devices=0x0
>ata4: [MPSAFE]
>ata4: [ITHREAD]
>ata5: <ATA channel 3> on atapci0
>ata5: SATA connect status=00000000
>ata5: ahci_reset devices=0x0
>ata5: [MPSAFE]
>ata5: [ITHREAD]
>ohci0: <OHCI (generic) USB controller> mem 0xfe8fe000-0xfe8fefff irq 16 at device 18.0 on pci0
>ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fe000
>ioapic0: routing intpin 16 (PCI IRQ 16) to vector 51
>ohci0: [GIANT-LOCKED]
>ohci0: [ITHREAD]
>usb0: OHCI version 1.0, legacy support
>usb0: SMM does not respond, resetting
>usb0: <OHCI (generic) USB controller> on ohci0
>usb0: USB revision 1.0
>uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
>uhub0: 3 ports with 3 removable, self powered
>ohci1: <OHCI (generic) USB controller> mem 0xfe8fd000-0xfe8fdfff irq 16 at device 18.1 on pci0
>ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fd000
>ohci1: [GIANT-LOCKED]
>ohci1: [ITHREAD]
>usb1: OHCI version 1.0, legacy support
>usb1: SMM does not respond, resetting
>usb1: <OHCI (generic) USB controller> on ohci1
>usb1: USB revision 1.0
>uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
>uhub1: 3 ports with 3 removable, self powered
>ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ff8ff irq 17 at device 18.2 on pci0
>ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe8ff800
>ehci0: [GIANT-LOCKED]
>ehci0: [ITHREAD]
>ehci0: Dropped interrupts workaround enabled
>usb2: EHCI version 1.0
>usb2: companion controllers, 3 ports each: usb0 usb1
>usb2: <EHCI (generic) USB 2.0 controller> on ehci0
>usb2: USB revision 2.0
>uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
>uhub2: 6 ports with 6 removable, self powered
>umass0: <JMicron USB to ATA/ATAPI Bridge, class 0/0, rev 2.00/1.00, addr 2> on uhub2
>umass0:0:0:-1: Attached to scbus0
>ohci2: <OHCI (generic) USB controller> mem 0xfe8fc000-0xfe8fcfff irq 18 at device 19.0 on pci0
>ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fc000
>ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52
>ohci2: [GIANT-LOCKED]
>ohci2: [ITHREAD]
>usb3: OHCI version 1.0, legacy support
>usb3: SMM does not respond, resetting
>usb3: <OHCI (generic) USB controller> on ohci2
>usb3: USB revision 1.0
>uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
>uhub3: 3 ports with 3 removable, self powered
>ohci3: <OHCI (generic) USB controller> mem 0xfe8fb000-0xfe8fbfff irq 18 at device 19.1 on pci0
>ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fb000
>ohci3: [GIANT-LOCKED]
>ohci3: [ITHREAD]
>usb4: OHCI version 1.0, legacy support
>usb4: SMM does not respond, resetting
>usb4: <OHCI (generic) USB controller> on ohci3
>usb4: USB revision 1.0
>uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
>uhub4: 3 ports with 3 removable, self powered
>ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff400-0xfe8ff4ff irq 19 at device 19.2 on pci0
>ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe8ff400
>ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
>ehci1: [GIANT-LOCKED]
>ehci1: [ITHREAD]
>ehci1: Dropped interrupts workaround enabled
>usb5: EHCI version 1.0
>usb5: companion controllers, 3 ports each: usb3 usb4
>usb5: <EHCI (generic) USB 2.0 controller> on ehci1
>usb5: USB revision 2.0
>uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
>uhub5: 6 ports with 6 removable, self powered
>pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
>atapci1: <ATI IXP700 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
>atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00
>ata0: <ATA channel 0> on atapci1
>atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
>atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
>ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata0: stat1=0x7f err=0xff lsb=0xff msb=0xff
>ata0: reset tp2 stat0=ff stat1=ff devices=0x0
>ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
>ata0: [MPSAFE]
>ata0: [ITHREAD]
>pci0: <multimedia> at device 20.2 (no driver attached)
>isab0: <PCI-ISA bridge> at device 20.3 on pci0
>isa0: <ISA bus> on isab0
>pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
>pcib3:   domain            0
>pcib3:   secondary bus     3
>pcib3:   subordinate bus   3
>pcib3:   I/O decode        0xf000-0xfff
>pcib3:   no prefetched decode
>pcib3:   Subtractively decoded bridge.
>pci3: <ACPI PCI bus> on pcib3
>pci3: domain=0, physical bus=3
>ohci4: <OHCI (generic) USB controller> mem 0xfe8fa000-0xfe8fafff irq 18 at device 20.5 on pci0
>ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fa000
>ohci4: [GIANT-LOCKED]
>ohci4: [ITHREAD]
>usb6: OHCI version 1.0, legacy support
>usb6: SMM does not respond, resetting
>usb6: <OHCI (generic) USB controller> on ohci4
>usb6: USB revision 1.0
>uhub6: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
>uhub6: 2 ports with 2 removable, self powered
>acpi_button0: <Power Button> on acpi0
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0065
>atkbd: keyboard ID 0x41ab (2)
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
>ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
>atkbd0: [GIANT-LOCKED]
>atkbd0: [ITHREAD]
>psm0: unable to allocate IRQ
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
>psm0: current command byte:0065
>psm0: failed to reset the aux device.
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0: irq maps: 0 0 0 0
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0: irq maps: 0 0 0 0
>sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>sio0: type 16550A
>ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
>sio0: [FILTER]
>fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
>fdc0: ic_type 90 part_id 80
>ioapic0: routing intpin 6 (ISA IRQ 6) to vector 57
>fdc0: [FILTER]
>cpu0: <ACPI CPU> on acpi0
>cpu0: switching to generic Cx mode
>acpi_throttle0: <ACPI CPU Throttling> on cpu0
>acpi_throttle0: P_CNT from P_BLK 0x810
>powernow0: <PowerNow! K8> on cpu0
>powernow0: STATUS: 0x310c160e0c110211
>powernow0: STATUS: maxfid: 0x11
>powernow0: STATUS: maxvid: 0x0c
>device_attach: powernow0 attach returned 6
>cpu1: <ACPI CPU> on acpi0
>powernow1: <PowerNow! K8> on cpu1
>powernow1: STATUS: 0x310c160e0c110211
>powernow1: STATUS: maxfid: 0x11
>powernow1: STATUS: maxvid: 0x0c
>device_attach: powernow1 attach returned 6
>ex_isa_identify()
>atkbdc: atkbdc0 already exists; skipping it
>fdc: fdc0 already exists; skipping it
>sio: sio0 already exists; skipping it
>ahc_isa_probe 0: ioport 0xc00 alloc failed
>sc: sc0 already exists; skipping it
>vga: vga0 already exists; skipping it
>isa_probe_children: disabling PnP devices
>isa_probe_children: probing non-PnP devices
>ppc0: cannot reserve I/O port range
>ppc0: <Parallel port> failed to probe at irq 7 on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>sio1: irq maps: 0 0 0 0
>sio1: probe failed test(s): 0 1 2 4 6 7 9
>sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
>sio2: not probed (disabled)
>sio3: not probed (disabled)
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>isa_probe_children: probing PnP devices
>Device configuration finished.
>procfs registered
>lapic: Divisor 2, Frequency 100004014 hz
>Timecounter "TSC" frequency 2500100101 Hz quality -100
>Timecounters tick every 1.000 msec
>lo0: bpf attached
>hptrr: no controller detected.
>ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
>ad4: 953869MB <WDC WD10EADS-00L5B1 01.01A01> at ata2-master SATA300
>ad4: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
>GEOM: new disk ad4
>ad4: Silicon Image check1 failed
>ad4: Adaptec check1 failed
>ad4: LSI (v3) check1 failed
>ad4: LSI (v2) check1 failed
>ad4: FreeBSD check1 failed
>pass0 at umass-sim0 bus 0 target 0 lun 0
>pass0: <Maxtor 6 B200P0 1G10> Fixed Direct Access SCSI-2 device 
>pass0: 40.000MB/s transfers
>GEOM: new disk da0
>ATA PseudoRAID loaded
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>     ID: 0x01000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
>ioapic0: Assigning ISA IRQ 1 to local APIC 0
>ioapic0: Assigning ISA IRQ 4 to local APIC 1
>ioapic0: Assigning ISA IRQ 6 to local APIC 0
>ioapic0: Assigning ISA IRQ 9 to local APIC 1
>ioapic0: Assigning ISA IRQ 14 to local APIC 0
>ioapic0: Assigning PCI IRQ 16 to local APIC 1
>ioapic0: Assigning PCI IRQ 17 to local APIC 0
>ioapic0: Assigning PCI IRQ 18 to local APIC 1
>ioapic0: Assigning PCI IRQ 19 to local APIC 0
>ioapic0: Assigning PCI IRQ 22 to local APIC 1
>da0 at umass-sim0 bus 0 target 0 lun 0
>da0: <Maxtor 6 B200P0 1G10> Fixed Direct Access SCSI-2 device 
>da0: 40.000MB/s transfers
>da0: 194481MB (398297088 512 byte sectors: 255H 63S/T 24792C)
>Trying to mount root from ufs:/dev/ad4s1a
>start_init: trying /sbin/init
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x5a
>acpi: bad write to port 0x000 (8), val 0x7
>acpi: bad write to port 0x001 (8), val 0x7
>acpi: bad write to port 0x000 (8), val 0x30
>acpi: bad read from port 0x001 (8)
>acpi: bad read from port 0x000 (8)
>acpi: bad write to port 0x000 (8), val 0xa5
>re0: link state changed to UP

Actions: View

Attachments on bug 131456: 93533