Attachment 96475 Details for Bug 135094 – file.shar

file.shar

file.shar (text/plain), 12.69 KB, created by CeDeROM on 2009-05-31 15:50:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: CeDeROM

Created: 2009-05-31 15:50:00 UTC

Size: 12.69 KB

patch

obsolete

># This is a shell archive.  Save it in a file, remove anything before
># this line, and then unpack it by entering "sh file".  Note, it may
># create directories; files and directories will be owned by you and
># have default permissions.
>#
># This archive contains:
>#
>#	/usr/ports/devel/openocd
>#	/usr/ports/devel/openocd/distinfo
>#	/usr/ports/devel/openocd/Makefile
>#	/usr/ports/devel/openocd/pkg-descr
>#	/usr/ports/devel/openocd/pkg-plist
>#	/usr/ports/devel/openocd/files
>#	/usr/ports/devel/openocd/files/patch-openocd.c
>#	/usr/ports/devel/openocd/pkg-message
>#
>echo c - /usr/ports/devel/openocd
>mkdir -p /usr/ports/devel/openocd > /dev/null 2>&1
>echo x - /usr/ports/devel/openocd/distinfo
>sed 's/^X//' >/usr/ports/devel/openocd/distinfo <<
>'3afeb637222531d093b8e5b2729bcff1'
>XMD5 (openocd-0.1.0.tar.gz) = 994b603d280ab85b5f255342c1d6b66c
>XSHA256 (openocd-0.1.0.tar.gz) =
>e468c907355727f7aede5623afd77721eb75abe7686af7f2f388f41a7c0f2911
>XSIZE (openocd-0.1.0.tar.gz) = 985328
>3afeb637222531d093b8e5b2729bcff1
>echo x - /usr/ports/devel/openocd/Makefile
>sed 's/^X//' >/usr/ports/devel/openocd/Makefile <<
>'88d611a1eb1fabe2051a56e779ff5244'
>X# New ports collection makefile for:   openocd
>X# Date created:       31 May 2009
>X# Whom:               Tomek CeDeROM Cedro (http://www.tomek.cedro.info)
>X#
>X# $FreeBSD$
>X#
>X
>XPORTNAME=		openocd
>XPORTVERSION=	0.1.0
>XCATEGORIES=	devel
>XMASTER_SITES=	${MASTER_SITE_BERLIOS}
>XMASTER_SITE_SUBDIR=	openocd
>X
>XMAINTAINER=	tomek.cedro@gmail.com
>XCOMMENT=		Open On-Chip Debugger
>X
>XWRKSRC=		${WRKDIR}/${PORTNAME}-${PORTVERSION}/
>XMAN1=		openocd.1
>XINFO=		${PORTNAME}
>XUSE_GMAKE=	yes
>XCFLAGS+=		-I${PREFIX}/include -I${LOCALBASE}/include -L${PREFIX}/lib
>-L${LOCALBASE}/lib
>X
>XGNU_CONFIGURE=	yes
>XCONFIGURE_ARGS=	--enable-release
>XOPTIONS=		DUMMY "Dummy driver support" on \
>X			FT2232 "FT2232 based USB devices (using libftdi)" on \
>X			RLINK "Raisonance RLink JTAG Programmer" on\
>X			JLINK "Segger J-Link JTAG Programmer" on\
>X			VSLLINK "Versaloon-Link JTAG Programmer" on\
>X			USBPROG "usbprog JTAG Programmer" on\
>X			PRESTO "ASIX Presto Programmer (using libftdi)" on\
>X			AT91RM9200 "AT91RM9200 based SBCs" on\
>X			EP93XX "EP93xx based SBCs" on
>X#Below are the interfaces that need source rewitre to work with FreeBSD
>X# They are hidden because they break a build. Patches are welcome :-)
>X# Type: make WITH_{OPTION}=1 to try the broken build (ie: make WITH_PARPORT=1)
>X#			PARPORT "Enable building the pc parallel port driver" off\
>X# Parport: parport.c:68:20: error: sys/io.h: No such file or directory
>X#			AMTJTAGACCEL "Amontec JTAG-Accelerator driver" off \
>X# Amtjtagaccel: amt_jtagaccel.c:45:20: error: sys/io.h: No such file
>or directory
>X#			ECOSBOARD "eCosBoard based JTAG debugger" off\
>X# Ecosboard:	replacements.h:36:28: error: pkgconf/system.h: No such
>file or directory
>X#			OOCDTRACE "OpenOCD+trace ETM capture device" off\
>X# Oocdtrace:	ocd_trace.c:127: error: 'B2500000' undeclared (first use
>in this function)
>X#			GW16012 "Gateworks GW16012 JTAG Programmer" off\
>X# Gw16012:	gw16012.c:67:20: error: sys/io.h: No such file or directory
>X#			HTTPD "Enable builtin httpd server" off\
>X# microhttpd does not link properly, used by some Zyli cable
>X#			IOUTIL "Enable ioutil functions" off
>X
>X.include <bsd.port.options.mk>
>X
>X.if defined(WITH_DUMMY)
>XCONFIGURE_ARGS+=	--enable-dummy
>X.else
>XCONFIGURE_ARGS+=	--disable-dummy
>X.endif
>X
>X.if defined(WITH_FT2232)
>XCONFIGURE_ARGS+=	--enable-ft2232_libftdi
>XLIB_DEPENDS+=		ftdi:${PORTSDIR}/devel/libftdi
>X.else
>XCONFIGURE_ARGS+=	--disable-ft2232_libftdi
>X.endif
>X
>X.if defined(WITH_PARPORT)
>XCONFIGURE_ARGS+=	--enable-parport
>X.else
>XCONFIGURE_ARGS+=	--disable-parport
>X.endif
>X
>X.if defined(WITH_AMTJTAGACCEL)
>XCONFIGURE_ARGS+=	--enable-amtjtagaccel
>XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
>X.else
>XCONFIGURE_ARGS+=	--disable-amtjtagaccel
>X.endif
>X
>X.if defined(WITH_ECOSBOARD)
>XCONFIGURE_ARGS+=	--enable-ecosboard
>XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
>X.else
>XCONFIGURE_ARGS+=	--disable-ecosboard
>X.endif
>X
>X.if defined(WITH_RLINK)
>XCONFIGURE_ARGS+=	--enable-rlink
>XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
>X.else
>XCONFIGURE_ARGS+=	--disable-rlink
>X.endif
>X
>X.if defined(WITH_JLINK)
>XCONFIGURE_ARGS+=	--enable-jlink
>XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
>X.else
>XCONFIGURE_ARGS+=	--disable-jlink
>X.endif
>X
>X.if defined(WITH_VSLLINK)
>XCONFIGURE_ARGS+=	--enable-vsllink
>XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
>X.else
>XCONFIGURE_ARGS+=	--disable-vsllink
>X.endif
>X
>X.if defined(WITH_OOCDTRACE)
>XCONFIGURE_ARGS+=	--enable-oocd_trace
>XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
>X.else
>XCONFIGURE_ARGS+=	--disable-oocd_trace
>X.endif
>X
>X.if defined(WITH_USBPROG)
>XCONFIGURE_ARGS+=	--enable-usbprog
>XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
>X.else
>XCONFIGURE_ARGS+=	--disable-usbprog
>X.endif
>X
>X.if defined(WITH_PRESTO)
>XCONFIGURE_ARGS+=	--enable-presto_libftdi
>XLIB_DEPENDS+=		ftdi:${PORTSDIR}/devel/libftdi
>X.else
>XCONFIGURE_ARGS+=	--disable-presto_libftdi
>X.endif
>X
>X.if defined(WITH_GW16012)
>XCONFIGURE_ARGS+=	--enable-gw16012
>XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
>X.else
>XCONFIGURE_ARGS+=	--disable-gw16012
>X.endif
>X
>X.if defined(WITH_AT91RM9200)
>XCONFIGURE_ARGS+=	--enable-at91rm9200
>XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
>X.else
>XCONFIGURE_ARGS+=	--disable-at91rm9200
>X.endif
>X
>X.if defined(WITH_EP93XX)
>XCONFIGURE_ARGS+=	--enable-ep93xx
>XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
>X.else
>XCONFIGURE_ARGS+=	--disable-ep93xx
>X.endif
>X
>X.if defined(WITH_HTTPD)
>XCONFIGURE_ARGS+=	--enable-httpd
>XLIB_DEPENDS+=		microhttpd:${PORTSDIR}/www/libmicrohttpd
>X.else
>XCONFIGURE_ARGS+=	--disable-httpd
>X.endif
>X
>X.if defined(WITH_IOUTIL)
>XCONFIGURE_ARGS+=	--enable-ioutil
>X.else
>XCONFIGURE_ARGS+=	--disable-ioutil
>X.endif
>X
>Xpost-install:
>X	@${CAT} ${PKGMESSAGE}
>X
>X.include <bsd.port.mk>
>88d611a1eb1fabe2051a56e779ff5244
>echo x - /usr/ports/devel/openocd/pkg-descr
>sed 's/^X//' >/usr/ports/devel/openocd/pkg-descr <<
>'eacd5d8b52ed17b989af8d0f6d332e8a'
>XThe Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system
>Xprogramming and boundary-scan testing for embedded target devices. OpenOCD uses
>Xa "hardware interface dongle" to communicate with the JTAG (IEEE 1149.1)
>Xcompliant taps on your target board. OpenOCD currently supports many types
>Xof hardware dongles: USB based, parallel port based, and other standalone boxes
>Xthat run OpenOCD internally. It allows ARM7 (ARM7TDMI and ARM720t),
>XARM9 (ARM920T, ARM922T, ARM926EJ-S, ARM966E-S), XScale (PXA25x, IXP42x) and
>XCortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged
>Xvia the GDB protocol. Flash writing is supported for external CFI compatible
>XNOR flashes (Intel and AMD/Spansion command set) and several internal flashes
>X(LPC2000, AT91SAM7, STR7x, STR9x, LM3, and STM32x). Preliminary support for
>Xvarious NAND flash controllers (LPC3180, Orion, S3C24xx, more) controller is
>Xincluded.
>X
>XWWW: http://openocd.berlios.de/
>eacd5d8b52ed17b989af8d0f6d332e8a
>echo x - /usr/ports/devel/openocd/pkg-plist
>sed 's/^X//' >/usr/ports/devel/openocd/pkg-plist <<
>'8d321b66b84ec001e4d3f5bb4abf6c26'
>Xbin/openocd
>Xlib/openocd/board/arm_evaluator7t.cfg
>Xlib/openocd/board/at91rm9200-dk.cfg
>Xlib/openocd/board/eir.cfg
>Xlib/openocd/board/hammer.cfg
>Xlib/openocd/board/iar_str912_sk.cfg
>Xlib/openocd/board/imx27ads.cfg
>Xlib/openocd/board/imx31pdk.cfg
>Xlib/openocd/board/logicpd_imx27.cfg
>Xlib/openocd/board/olimex_sam7_ex256.cfg
>Xlib/openocd/board/pic-p32mx.cfg
>Xlib/openocd/board/stm3210e_eval.cfg
>Xlib/openocd/board/stm32f10x_128k_eval.cfg
>Xlib/openocd/board/x300t.cfg
>Xlib/openocd/ecos/at91eb40a.elf
>Xlib/openocd/interface/arm-usb-ocd.cfg
>Xlib/openocd/interface/at91rm9200.cfg
>Xlib/openocd/interface/calao-usb-a9260-c01.cfg
>Xlib/openocd/interface/calao-usb-a9260-c02.cfg
>Xlib/openocd/interface/calao-usb-a9260.cfg
>Xlib/openocd/interface/chameleon.cfg
>Xlib/openocd/interface/dummy.cfg
>Xlib/openocd/interface/flyswatter.cfg
>Xlib/openocd/interface/jlink.cfg
>Xlib/openocd/interface/jtagkey-tiny.cfg
>Xlib/openocd/interface/jtagkey.cfg
>Xlib/openocd/interface/luminary-libftdi.cfg
>Xlib/openocd/interface/luminary-lm3s811.cfg
>Xlib/openocd/interface/luminary.cfg
>Xlib/openocd/interface/olimex-arm-usb-ocd.cfg
>Xlib/openocd/interface/olimex-jtag-tiny-a.cfg
>Xlib/openocd/interface/openocd-usb.cfg
>Xlib/openocd/interface/parport.cfg
>Xlib/openocd/interface/parport_dlc5.cfg
>Xlib/openocd/interface/rlink.cfg
>Xlib/openocd/interface/signalyzer.cfg
>Xlib/openocd/interface/stm32-stick.cfg
>Xlib/openocd/interface/str9-comstick.cfg
>Xlib/openocd/interface/turtelizer2.cfg
>Xlib/openocd/target/aduc702x.cfg
>Xlib/openocd/target/at91eb40a.cfg
>Xlib/openocd/target/at91r40008.cfg
>Xlib/openocd/target/at91rm9200.cfg
>Xlib/openocd/target/at91sam9260.cfg
>Xlib/openocd/target/at91sam9260minimal.cfg
>Xlib/openocd/target/epc9301.cfg
>Xlib/openocd/target/imote2.cfg
>Xlib/openocd/target/imx27.cfg
>Xlib/openocd/target/imx31.cfg
>Xlib/openocd/target/ipx42x.cfg
>Xlib/openocd/target/is5114.cfg
>Xlib/openocd/target/lm3s3748.cfg
>Xlib/openocd/target/lm3s6965.cfg
>Xlib/openocd/target/lm3s811.cfg
>Xlib/openocd/target/lpc2129.cfg
>Xlib/openocd/target/lpc2148.cfg
>Xlib/openocd/target/lpc2148_2mhz.cfg
>Xlib/openocd/target/lpc2148_rclk.cfg
>Xlib/openocd/target/lpc2294.cfg
>Xlib/openocd/target/netx500.cfg
>Xlib/openocd/target/nslu2.cfg
>Xlib/openocd/target/omap5912.cfg
>Xlib/openocd/target/pic32mx.cfg
>Xlib/openocd/target/pxa255.cfg
>Xlib/openocd/target/pxa255_sst.cfg
>Xlib/openocd/target/pxa270.cfg
>Xlib/openocd/target/sam7se512.cfg
>Xlib/openocd/target/sam7x256.cfg
>Xlib/openocd/target/samsung_s3c2410.cfg
>Xlib/openocd/target/samsung_s3c2440.cfg
>Xlib/openocd/target/samsung_s3c4510.cfg
>Xlib/openocd/target/samsung_s3c6410.cfg
>Xlib/openocd/target/sharp_lh79532.cfg
>Xlib/openocd/target/smdk6410.cfg
>Xlib/openocd/target/smp8634.cfg
>Xlib/openocd/target/stm32.cfg
>Xlib/openocd/target/stm32stick.cfg
>Xlib/openocd/target/str710.cfg
>Xlib/openocd/target/str730.cfg
>Xlib/openocd/target/str750.cfg
>Xlib/openocd/target/str910-eval.cfg
>Xlib/openocd/target/str912.cfg
>Xlib/openocd/target/str9comstick.cfg
>Xlib/openocd/target/test_reset_syntax_error.cfg
>Xlib/openocd/target/test_syntax_error.cfg
>Xlib/openocd/target/wi-9c.cfg
>Xlib/openocd/target/xba_revA3.cfg
>Xlib/openocd/target/zy1000.cfg
>Xlib/openocd/tcl/bitsbytes.tcl
>Xlib/openocd/tcl/chip/atmel/at91/aic.tcl
>Xlib/openocd/tcl/chip/atmel/at91/at91sam7x128.tcl
>Xlib/openocd/tcl/chip/atmel/at91/at91sam7x256.tcl
>Xlib/openocd/tcl/chip/atmel/at91/pmc.tcl
>Xlib/openocd/tcl/chip/atmel/at91/rtt.tcl
>Xlib/openocd/tcl/chip/atmel/at91/usarts.tcl
>Xlib/openocd/tcl/chip/st/stm32/stm32.tcl
>Xlib/openocd/tcl/chip/st/stm32/stm32_rcc.tcl
>Xlib/openocd/tcl/chip/st/stm32/stm32_regs.tcl
>Xlib/openocd/tcl/cpu/arm/arm7tdmi.tcl
>Xlib/openocd/tcl/cpu/arm/arm920.tcl
>Xlib/openocd/tcl/cpu/arm/arm946.tcl
>Xlib/openocd/tcl/cpu/arm/arm966.tcl
>Xlib/openocd/tcl/cpu/arm/cortex_m3.tcl
>Xlib/openocd/tcl/memory.tcl
>Xlib/openocd/tcl/mmr_helpers.tcl
>Xlib/openocd/tcl/readable.tcl
>Xlib/openocd/xscale/debug_handler.bin
>Xshare/openocd/contrib/libdcc/README
>Xshare/openocd/contrib/libdcc/dcc_stdio.c
>Xshare/openocd/contrib/libdcc/dcc_stdio.h
>Xshare/openocd/contrib/libdcc/example.c
>Xshare/openocd/contrib/openocd.udev
>X@dirrm share/openocd/contrib/libdcc
>X@dirrm share/openocd/contrib
>X@dirrm share/openocd
>X@dirrm lib/openocd/xscale
>X@dirrm lib/openocd/tcl/cpu/arm
>X@dirrm lib/openocd/tcl/cpu
>X@dirrm lib/openocd/tcl/chip/st/stm32
>X@dirrm lib/openocd/tcl/chip/st
>X@dirrm lib/openocd/tcl/chip/atmel/at91
>X@dirrm lib/openocd/tcl/chip/atmel
>X@dirrm lib/openocd/tcl/chip
>X@dirrm lib/openocd/tcl
>X@dirrm lib/openocd/target
>X@dirrm lib/openocd/interface
>X@dirrm lib/openocd/ecos
>X@dirrm lib/openocd/board
>X@dirrm lib/openocd
>8d321b66b84ec001e4d3f5bb4abf6c26
>echo c - /usr/ports/devel/openocd/files
>mkdir -p /usr/ports/devel/openocd/files > /dev/null 2>&1
>echo x - /usr/ports/devel/openocd/files/patch-openocd.c
>sed 's/^X//' >/usr/ports/devel/openocd/files/patch-openocd.c <<
>'529dd6dcb3ebb9c3156bbe7df2145ffc'
>X--- src/openocd.c	2009-01-20 05:04:36.000000000 +0100
>X+++ src/openocd.c	2009-05-19 23:12:06.000000000 +0200
>X@@ -56,12 +56,6 @@
>X #include <unistd.h>
>X #include <errno.h>
>X
>X-#ifdef _WIN32
>X-#include <malloc.h>
>X-#else
>X-#include <alloca.h>
>X-#endif
>X-
>X #include "replacements.h"
>X
>X void print_version(void)
>X
>529dd6dcb3ebb9c3156bbe7df2145ffc
>echo x - /usr/ports/devel/openocd/pkg-message
>sed 's/^X//' >/usr/ports/devel/openocd/pkg-message <<
>'25d2c5af5cbf4af798994ca1a8d2288f'
>X===============================================================================
>X
>XNow You can use OpenOCD. Handbook is at: http://openocd.berlios.de/doc/html/
>X
>XTo allow an ordinary user acces to the hotplug USB interface add him
>Xto the operator group and add these lines to the following files:
>X
>X/etc/devfs.rules:
>X[localrules=10]
>X	add path 'ugen*' mode 0660 group operator
>X
>X/etc/rc.conf:
>Xdevfs_system_ruleset="localrules"
>X
>X===============================================================================
>25d2c5af5cbf4af798994ca1a8d2288f
>exit

Actions: View

Attachments on bug 135094: 96475