Attachment 9972 Details for Bug 20183 – file.diff

[patch] file.diff

file.diff (text/plain), 32.09 KB, created by ue on 2000-07-25 23:50:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: ue

Created: 2000-07-25 23:50:01 UTC

Size: 32.09 KB

patch

obsolete

>Index: article.sgml
>===================================================================
>RCS file: /home/ncvs/doc/en_US.ISO_8859-1/articles/mh/article.sgml,v
>retrieving revision 1.7
>diff -u -r1.7 article.sgml
>--- article.sgml	1999/10/10 20:20:38	1.7
>+++ article.sgml	2000/07/25 21:14:48
>@@ -35,7 +35,7 @@
>       initial philosophies behind MH were developed. MH isn't so much
>       a monolithic email program but a philosophy about how best to
>       develop tools for reading email. The MH developers have done a
>-      great job adhering to the <acronym>KISS</> principle: Keep It
>+      great job adhering to the <acronym>KISS</acronym> principle: Keep It
>       Simple Stupid.  Rather than have one large program for reading,
>       sending and handling email they have written specialized
>       programs for each part of your email life. One might liken MH to
>@@ -64,9 +64,9 @@
> 	</screen>
>       </informalexample>
> 
>-      You will notice that it created a <filename>/usr/local/lib/mh</>
>+      You will notice that it created a <filename>/usr/local/lib/mh</filename>
>       directory for you as well as adding several binaries to the
>-      <filename>/usr/local/bin</> directory. If you would prefer to
>+      <filename>/usr/local/bin</filename> directory. If you would prefer to
>       compile it yourself then you can anonymous ftp it from <ulink
> 	URL="ftp://ftp.ics.uci.edu/">ftp.ics.uci.edu</ulink> or <ulink
> 	URL="ftp://louie.udel.edu/">louie.udel.edu</ulink>.</para>
>@@ -85,33 +85,33 @@
>   <sect1>
>     <title>Reading Mail</title>
> 
>-    <para>This section covers how to use <command>inc</>,
>-      <command>show</>, <command>scan</>, <command>next</>,
>-      <command>prev</>, <command>rmm</>, <command>rmf</>, and
>-      <command>msgchk</>.  One of the best things about MH is the
>+    <para>This section covers how to use <command>inc</command>,
>+      <command>show</command>, <command>scan</command>, <command>next</command>,
>+      <command>prev</command>, <command>rmm</command>, <command>rmf</command>, and
>+      <command>msgchk</command>.  One of the best things about MH is the
>       consistent interface between programs. A few things to keep in
>       mind when using these commands is how to specify message lists.
>-      In the case of <command>inc</> this doesn't really make any
>-      sense but with commands like <command>show</> it is useful to
>+      In the case of <command>inc</command> this doesn't really make any
>+      sense but with commands like <command>show</command> it is useful to
>       know. </para>
> 
>     <para>A message list can consist of something like <parameter>23
>-	20 16</> which will act on messages 23, 20 and 16. This is
>+	20 16</parameter> which will act on messages 23, 20 and 16. This is
>       fairly simple but you can do more useful things like
>-      <parameter>23-30</> which will act on all the messages between
>+      <parameter>23-30</parameter> which will act on all the messages between
>       23 and 30. You can also specify something like
>-      <parameter>cur:10</> which will act on the current message and
>-      the next 9 messages. The <parameter>cur</>, <parameter>last</>,
>-      and <parameter>first</> messages are special messages that refer
>+      <parameter>cur:10</parameter> which will act on the current message and
>+      the next 9 messages. The <parameter>cur</parameter>, <parameter>last</parameter>,
>+      and <parameter>first</parameter> messages are special messages that refer
>       to the current, last or first message in the folder.</para>
> 
>     <sect2 id="inc">
>-      <title><command>inc</>, <command>msgchk</>&mdash;read in your
>+      <title><command>inc</command>, <command>msgchk</command>&mdash;read in your
> 	new email or check it</title>
> 
>-      <para>If you just type in <userinput>inc</> and hit
>-	<keycap>return</> you will be well on your way to getting
>-	started with MH. The first time you run <command>inc</> it
>+      <para>If you just type in <userinput>inc</userinput> and hit
>+	<keycap>return</keycap> you will be well on your way to getting
>+	started with MH. The first time you run <command>inc</command> it
> 	will setup your account to use all the MH defaults and ask you
> 	about creating a Mail directory. If you have mail waiting to
> 	be downloaded you will see something that looks like:</para>
>@@ -126,45 +126,45 @@
>       </informalexample>
> 
>       <para>This is the same thing you will see from a
>-	<command>scan</> (see <xref linkend="scan">). If you just run
>-	<command>inc</> with no arguments it will look on your
>+	<command>scan</command> (see <xref linkend="scan">). If you just run
>+	<command>inc</command> with no arguments it will look on your
> 	computer for email that is supposed to be coming to
> 	you.</para>
> 
>       <para>A lot of people like to use POP for grabbing their email.
> 	MH can do POP to grab your email. You will need to give
>-	<command>inc</> a few command line arguments.</para>
>+	<command>inc</command> a few command line arguments.</para>
> 
>       <informalexample>
> 	<screen>&prompt.user; <userinput>inc -host mail.pop.org -user <replaceable>username</> -norpop</>
> 	</screen>
>       </informalexample>
> 
>-      <para>That tells <command>inc</> to go to
>-	<parameter>mail.pop.org</> to download your email, and that
>-	your username on their system is <replaceable>username</>. The
>-	<option>-norpop</option> option tells <command>inc</> to use
>+      <para>That tells <command>inc</command> to go to
>+	<parameter>mail.pop.org</parameter> to download your email, and that
>+	your username on their system is <replaceable>username</replaceable>. The
>+	<option>-norpop</option> option tells <command>inc</command> to use
> 	plain POP3 for downloading your email. MH has support for a
> 	few different dialects of POP. More than likely you will never
> 	ever need to use them though. While you can do more complex
> 	things with inc such as audit files and scan format files this
> 	will get you going.</para>
> 
>-      <para>The <command>msgchk</> command is used to get information
>-	on whether or not you have new email. <command>msgchk</> takes
>+      <para>The <command>msgchk</command> command is used to get information
>+	on whether or not you have new email. <command>msgchk</command> takes
> 	the same <option>-host</option> and <option>-user</option>
>-	options that <command>inc</> takes.</para>
>+	options that <command>inc</command> takes.</para>
>     </sect2>
> 
>     <sect2 id="show">
>-      <title><command>show</>, <command>next</> and
>-	<command>prev</>&mdash;displaying and moving through
>+      <title><command>show</command>, <command>next</command> and
>+	<command>prev</command>&mdash;displaying and moving through
> 	email</title>
> 
>-      <para><command>show</> is to show a letter in your current
>-	folder.  Like <command>inc</>, <command>show</> is a fairly
>-	straightforward command. If you just type <userinput>show</>
>-	and hit <keycap>return</> then it displays the current
>+      <para><command>show</command> is to show a letter in your current
>+	folder.  Like <command>inc</command>, <command>show</command> is a fairly
>+	straightforward command. If you just type <userinput>show</userinput>
>+	and hit <keycap>return</keycap> then it displays the current
> 	message. You can also give specific message numbers to
> 	show:</para>
> 
>@@ -175,23 +175,23 @@
> 
>       <para>This would display message numbers 32, 45 and 56 right
> 	after each other. Unless you change the default behavior
>-	<command>show</> basically just does a <command>more</> on the
>+	<command>show</command> basically just does a <command>more</command> on the
> 	email message.</para>
> 
>-      <para><command>next</> is used to move onto the next message and
>-	<command>prev</> will go to the previous message. Both
>-	commands have an implied <command>show</> command so that when
>+      <para><command>next</command> is used to move onto the next message and
>+	<command>prev</command> will go to the previous message. Both
>+	commands have an implied <command>show</command> command so that when
> 	you go to the next message it automatically displays
> 	it.</para>
>     </sect2>
> 
>     <sect2 id="scan">
>-      <title><command>scan</>&mdash;shows you a scan of your
>+      <title><command>scan</command>&mdash;shows you a scan of your
> 	messages</title>
> 
>-      <para><command>scan</> will display a brief listing of the
>+      <para><command>scan</command> will display a brief listing of the
> 	messages in your current folder. This is an example of what
>-	the <command>scan</> command will give you.</para>
>+	the <command>scan</command> command will give you.</para>
> 
>       <informalexample>
> 	<screen>  30+ 01/16 "Jordan K. Hubbar  Re: FBSD 2.1&lt;&lt;&gt; Do you want a library instead of
>@@ -205,32 +205,32 @@
> 	configurable.  This is the typical default display. It gives
> 	you the message number, the date on the email, the sender, the
> 	subject line, and a sentence fragment from the very beginning
>-	of the email if it can fit it. The <literal>+</> means that
>+	of the email if it can fit it. The <literal>+</literal> means that
> 	message is the current message, so if you do a
>-	<command>show</> it will display that message.</para>
>+	<command>show</command> it will display that message.</para>
> 
>       <para>One useful option for scan is the
> 	<option>-reverse</option> option. This will list your messages
> 	with the highest message number first and lowest message
>-	number last. Another useful option with <command>scan</> is to
>+	number last. Another useful option with <command>scan</command> is to
> 	have it read from a file. If you want to scan your incoming
>-	mailbox on FreeBSD without having to <command>inc</> it you
>+	mailbox on FreeBSD without having to <command>inc</command> it you
> 	can do <command>scan -file
>-	  /var/mail/<replaceable>username</></command>. This can be used
>-	with any file that is in the <database>mbox</> format.</para>
>+	  /var/mail/<replaceable>username</replaceable></command>. This can be used
>+	with any file that is in the <database>mbox</database> format.</para>
>     </sect2>
> 
>     <sect2 id="rmm">
>-      <title><command>rmm</> and <command>rmf</>&mdash;remove the
>+      <title><command>rmm</command> and <command>rmf</command>&mdash;remove the
> 	current message or folder</title>
> 
>-      <para><command>rmm</> is used to remove a mail message. The
>+      <para><command>rmm</command> is used to remove a mail message. The
> 	default is typically to not actually remove the message but to
> 	rename the file to one that is ignored by the MH commands. You
> 	will need to through periodically and physically delete the
>-	<quote>removed</> messages.</para>
>+	<quote>removed</quote> messages.</para>
> 
>-      <para>The <command>rmf</> command is used to remove folders.
>+      <para>The <command>rmf</command> command is used to remove folders.
> 	This doesn't just rename the files but actually removes the
> 	from the hard drive so you should be careful when you use this
> 	command.</para>
>@@ -240,8 +240,8 @@
>       <title>A typical session of reading with MH</title>
> 
>       <para>The first thing that you will want to do is
>-	<command>inc</> your new mail. So at a shell prompt just type
>-	in <command>inc</> and hit <keycap>return</>.</para>
>+	<command>inc</command> your new mail. So at a shell prompt just type
>+	in <command>inc</command> and hit <keycap>return</keycap>.</para>
> 
>       <informalexample>
> 	<screen>&prompt.user; <userinput>inc</>
>@@ -255,7 +255,7 @@
>       </informalexample>
> 
>       <para>This shows you the new email that has been added to your
>-	mailbox. So the next thing to do is <command>show</> the email
>+	mailbox. So the next thing to do is <command>show</command> the email
> 	and move around.</para>
> 
>       <informalexample>
>@@ -298,8 +298,8 @@
> 	</screen>
>       </informalexample>
> 
>-      <para>The <command>rmm</> removed the current message and the
>-	<command>next</> command moved me on to the next message.  Now
>+      <para>The <command>rmm</command> removed the current message and the
>+	<command>next</command> command moved me on to the next message.  Now
> 	if I wanted to look at ten most recent messages so I could
> 	read one of them here is what I would do:</para>
> 
>@@ -320,7 +320,7 @@
>       </informalexample>
> 
>       <para>Then if I wanted to read message number 27 I would do a
>-	<userinput>show 27</> and it would be displayed. As you can
>+	<userinput>show 27</userinput> and it would be displayed. As you can
> 	probably tell from this sample session MH is pretty easy to
> 	use and looking through emails and displaying them is fairly
> 	intuitive and easy.</para>
>@@ -337,19 +337,19 @@
>       the concept of folders. You have undoubtedly come across the
>       folders concept using other email programs. MH has folders too.
>       MH can even do sub-folders of a folder. One thing you should
>-      keep in mind with MH is that when you ran <command>inc</> for
>+      keep in mind with MH is that when you ran <command>inc</command> for
>       the first time and it asked you if it could create a
>-      <filename>Mail</> directory it began storing everything in that
>+      <filename>Mail</filename> directory it began storing everything in that
>       directory. If you look at that directory you will find a
>-      directory named <filename>inbox</>. The <filename>inbox</>
>+      directory named <filename>inbox</filename>. The <filename>inbox</filename>
>       directory houses all of your incoming mail that hasn't been
>       thrown anywhere else.</para>
> 
>     <para>Whenever you create a new folder a new directory is going to
>-      be created underneath your MH <filename>Mail</> directory, and
>+      be created underneath your MH <filename>Mail</filename> directory, and
>       messages in that folder are going to be stored in that
>       directory.  When new email comes in that new email is thrown
>-      into your <filename>inbox</> directory with a file name that is
>+      into your <filename>inbox</filename> directory with a file name that is
>       equivalent to the message number.  So even if you didn't have
>       any of the MH tools to read your email you could still use
>       standard UNIX commands to munge around in those directories and
>@@ -357,28 +357,28 @@
>       a lot of power with what you can do with your email.</para>
> 
>     <para>Just as you can use message lists like <parameter>23 16
>-	42</> with most MH commands there is a folder option you can
>+	42</parameter> with most MH commands there is a folder option you can
>       specify with just about every MH command. If you do a
>-      <command>scan +freebsd</> it will scan your <filename>freebsd</>
>+      <command>scan +freebsd</command> it will scan your <filename>freebsd</filename>
>       folder, and your current folder will be changed to
>-      <filename>freebsd</>. If you do a <command>show +freebsd 23 16
>-	42</>, <command>show</> is going to switch to your
>-      <filename>freebsd</> folder and display messages 23, 16 and 42.
>-      So remember that <option>+<replaceable>folder</></> syntax. You
>+      <filename>freebsd</filename>. If you do a <command>show +freebsd 23 16
>+	42</command>, <command>show</command> is going to switch to your
>+      <filename>freebsd</filename> folder and display messages 23, 16 and 42.
>+      So remember that <option>+<replaceable>folder</replaceable></option> syntax. You
>       will need to make sure you use it to make commands process
>       different folders. Remember you default folder for mail is
>-      <filename>inbox</> so doing a <command>folder +inbox</> should
>+      <filename>inbox</filename> so doing a <command>folder +inbox</command> should
>       always get you back to your mail. Of course, in MH's infinite
>       flexibility this can be changed but most places have probably
>-      left it as <command>inbox</>.</para>
>+      left it as <command>inbox</command>.</para>
> 
>     <sect2>
>-      <title><command>pick</>&mdash;search email that matches certain
>+      <title><command>pick</command>&mdash;search email that matches certain
> 	criteria</title>
> 
>-      <para><command>pick</> is one of the more complex commands in
>+      <para><command>pick</command> is one of the more complex commands in
> 	the MH system. So you might want to read the
>-	<citerefentry><refentrytitle>pick</><manvolnum>1</></> man
>+	<citerefentry><refentrytitle>pick</refentrytitle><manvolnum>1</manvolnum></citerefentry> man
> 	page for a more thorough understanding. At its simplest level
> 	you can do something like</para>
> 
>@@ -392,12 +392,12 @@
> 	</screen>
>       </informalexample>
> 
>-      <para>This will tell <command>pick</> to look through every
>+      <para>This will tell <command>pick</command> to look through every
> 	single line in every message in your current folder and tell
>-	you which message numbers it found the word <literal>pci</>
>-	in. You can then <command>show</> those messages and read them
>-	if you wish or <command>rmm</> them. You would have to specify
>-	something like <command>show 15 42 55-57</> to display them
>+	you which message numbers it found the word <literal>pci</literal>
>+	in. You can then <command>show</command> those messages and read them
>+	if you wish or <command>rmm</command> them. You would have to specify
>+	something like <command>show 15 42 55-57</command> to display them
> 	though. A slightly more useful thing to do is this:</para>
> 
>       <informalexample>
>@@ -410,16 +410,16 @@
>       <para>This will show you the same messages you just didn't have
> 	to work as hard to do it. The <option>-seq</option> option is
> 	really an abbreviation of <option>-sequence</option> and
>-	<command>pick</> is just a sequence which contains the message
>+	<command>pick</command> is just a sequence which contains the message
> 	numbers that matched. You can use sequences with just about
>-	any MH command. So you could have done an <command>rmm pick</>
>+	any MH command. So you could have done an <command>rmm pick</command>
> 	and all those messages would be removed instead. You sequence
> 	can be named anything. If you run pick again it will overwrite
> 	the old sequence if you use the same name.</para>
> 
>       <para>Doing a <command>pick -search</command> can be a bit more
> 	time consuming than just searching for message from someone,
>-	or to someone. So <command>pick</> allows you to use the
>+	or to someone. So <command>pick</command> allows you to use the
> 	following predefined search criteria:</para>
> 
>       <variablelist>
>@@ -468,7 +468,7 @@
> 
> 	  <listitem>
> 	    <para>search for any other component in the header. (i.e.
>-	      <option>--reply-to</> to find all emails with a certain
>+	      <option>--reply-to</option> to find all emails with a certain
> 	      reply-to in the header)</para>
> 	  </listitem>
> 	</varlistentry>
>@@ -482,7 +482,7 @@
> 	</informalexample>
> 
> 	to get a list of all the email send to the FreeBSD hackers
>-	mailing list. <command>pick</> also allows you to group these
>+	mailing list. <command>pick</command> also allows you to group these
> 	criteria in different ways using the following options:</para>
> 
>       <itemizedlist>
>@@ -531,42 +531,42 @@
> 	something called operator precedence. Remember in math how you
> 	evaluate from left to right and you do multiplication and
> 	division first and addition and subtraction second? MH has the
>-	same type of rules for <command>pick</>. It's fairly complex
>+	same type of rules for <command>pick</command>. It's fairly complex
> 	so you might want to study the man page. This document is just
> 	to help you get acquainted with MH.</para>
>     </sect2>
> 
>     <sect2>
>-      <title><command>folder</>, <command>folders</>,
>-	<command>refile</>&mdash;three useful programs for folder
>+      <title><command>folder</command>, <command>folders</command>,
>+	<command>refile</command>&mdash;three useful programs for folder
> 	maintenance</title>
> 
>       <para>There are three programs which are primarily just for
>-	manipulating your folders. The <command>folder</> program is
>+	manipulating your folders. The <command>folder</command> program is
> 	used to switch between folders, pack them, and list them. At
> 	its simplest level you can do a <command>folder
>-	+<replaceable>newfolder</></> and you will be switched into
>-	<replaceable>newfolder</>. From there on out all your MH
>-	commands like <command>comp</>, <command>repl</>,
>-	<command>scan</>, and <command>show</> will act on that
>-	<command>newfolder</> folder.</para>
>+	+<replaceable>newfolder</replaceable></command> and you will be switched into
>+	<replaceable>newfolder</replaceable>. From there on out all your MH
>+	commands like <command>comp</command>, <command>repl</command>,
>+	<command>scan</command>, and <command>show</command> will act on that
>+	<command>newfolder</command> folder.</para>
> 
>       <para>Sometimes when you are reading and deleting messages you
>-	will develop <quote>holes</> in your folders. If you do a
>-	<command>scan</> you might just see messages 34, 35, 36, 43,
>+	will develop <quote>holes</quote> in your folders. If you do a
>+	<command>scan</command> you might just see messages 34, 35, 36, 43,
> 	55, 56, 57, 80. If you do a <command>folder -pack</command>
> 	this will renumber all your messages so that there are no
> 	holes. It doesn't actually delete any messages though. So you
> 	may need to periodically go through and physically delete
>-	<command>rmm</>'d messages.</para>
>+	<command>rmm</command>'d messages.</para>
> 
>       <para>If you need statistics on your folders you can do a
>-	<command>folders</> or <command>folder -all</command> to list
>+	<command>folders</command> or <command>folder -all</command> to list
> 	all your folders, how many messages they have, what the
> 	current message is in each one and so on. This line of stats
> 	it displays for all your folders is the same one you get when
>-	you change to a folder with <command>folder +foldername</>. A
>-	<command>folders</> command looks like this:</para>
>+	you change to a folder with <command>folder +foldername</command>. A
>+	<command>folders</command> command looks like this:</para>
> 
>       <informalexample>
> 	<screen>                Folder      # of messages (  range  ); cur  msg  (other files)
>@@ -585,17 +585,17 @@
> 	</screen>
>       </informalexample>
>   
>-      <para>The <command>refile</> command is what you use to move
>+      <para>The <command>refile</command> command is what you use to move
> 	messages between folders. When you do something like
>-	<command>refile 23 +netfuture</> message number 23 is moved
>-	into the <filename>netfuture</> folder. You could also do
>-	something like <command>refile 23 +netfuture/latest</> which
>+	<command>refile 23 +netfuture</command> message number 23 is moved
>+	into the <filename>netfuture</filename> folder. You could also do
>+	something like <command>refile 23 +netfuture/latest</command> which
> 	would put message number 23 in a subfolder called
>-	<filename>latest</> under the <filename>netfuture</> folder.
>+	<filename>latest</filename> under the <filename>netfuture</filename> folder.
> 	If you want to keep a message in the current folder and link
> 	it you can do a <command>refile -link 23 +netfuture</command>
>-	which would keep 23 in your current <filename>inbox</> but
>-	also list in your <filename>netfuture</> folder. You are
>+	which would keep 23 in your current <filename>inbox</filename> but
>+	also list in your <filename>netfuture</filename> folder. You are
> 	probably beginning to realize some of the really powerful
> 	things you can do with MH.</para>
>     </sect2>
>@@ -613,29 +613,29 @@
>       Subject: headers already in it.  You are then sent into your
>       editor where you fill in the header information and then type
>       the body of your message below the dashed lines in the message.
>-      Then to the <command>whatnow</> program. When you are at the
>+      Then to the <command>whatnow</command> program. When you are at the
>       <prompt>What now?</prompt> prompt you can tell it to
>-      <command>send</>, <command>list</>, <command>edit</>,
>-      <command>edit</>, <command>push</>, and <command>quit</>. Most
>+      <command>send</command>, <command>list</command>, <command>edit</command>,
>+      <command>edit</command>, <command>push</command>, and <command>quit</command>. Most
>       of these commands are self-explanatory. So the message sending
>       process involves copying a component file, editing your email,
>-      and then telling the <command>whatnow</> program what to do with
>+      and then telling the <command>whatnow</command> program what to do with
>       your email.</para>
> 
>     <sect2>
>-      <title><command>comp</>, <command>forw</>,
>-	<command>reply</>&mdash;compose, forward or reply to a message
>+      <title><command>comp</command>, <command>forw</command>,
>+	<command>reply</command>&mdash;compose, forward or reply to a message
> 	to someone</title>
> 
>-      <para>The <command>comp</> program has a few useful command line
>+      <para>The <command>comp</command> program has a few useful command line
> 	options. The most important one to know right now is the
> 	<option>-editor</option> option. When MH is installed the
> 	default editor is usually a program called
>-	<command>prompter</> which comes with MH. It's not a very
>+	<command>prompter</command> which comes with MH. It's not a very
> 	exciting editor and basically just gets the job done. So when
> 	you go to compose a message to someone you might want to use
>-	<command>comp -editor /usr/bin/vi/</> or <command>comp -editor
>-	/usr/local/bin/pico/</> instead. Once you have run
>+	<command>comp -editor /usr/bin/vi/</command> or <command>comp -editor
>+	/usr/local/bin/pico/</command> instead. Once you have run
> 	<emphasis>comp</emphasis> you are in your editor and you see
> 	something that looks like this:</para>
> 
>@@ -648,9 +648,9 @@
>       </informalexample>
> 
>       <para>You need to put the person you are sending the mail to
>-	after the <literal>To:</> line. It works the same way for the
>+	after the <literal>To:</literal> line. It works the same way for the
> 	other headers also, so you would need to put your subject
>-	after the <literal>Subject:</> line. Then you would just put
>+	after the <literal>Subject:</literal> line. Then you would just put
> 	the body of your message after the dashed lines. It may seem a
> 	bit simplistic since a lot of email programs have special
> 	requesters that ask you for this information but there really
>@@ -667,55 +667,55 @@
>       </informalexample>
> 
>       <para>You can now save this message and exit your editor. You
>-	will see the <prompt>What now?</> prompt and you can type in
>-	<userinput>send</> or <userinput>s</> and hit
>-	<keycap>return</>. Then the FreeBSD core team will receive
>+	will see the <prompt>What now?</prompt> prompt and you can type in
>+	<userinput>send</userinput> or <userinput>s</userinput> and hit
>+	<keycap>return</keycap>. Then the FreeBSD core team will receive
> 	their just rewards. As I mentioned earlier you can also use
>-	other commands, for example <command>quit</> if you don't want
>+	other commands, for example <command>quit</command> if you don't want
> 	to send the message.</para>
> 
>-      <para>The <command>forw</> command is stunningly similar. The
>+      <para>The <command>forw</command> command is stunningly similar. The
> 	big difference being that the message you are forwarding is
> 	automatically included in the outgoing message. When you run
>-	<command>forw</> it will forward your current message. You can
>+	<command>forw</command> it will forward your current message. You can
> 	always tell it to forward something else by doing something
>-	like <command>forw 23</> and then message number 23 will be
>+	like <command>forw 23</command> and then message number 23 will be
> 	put in your outgoing message instead of the current message.
>-	Beyond those small differences <command>forw</> functions
>-	exactly the same as <command>comp</>. You go through the exact
>+	Beyond those small differences <command>forw</command> functions
>+	exactly the same as <command>comp</command>. You go through the exact
> 	same message sending process.</para>
> 
>-      <para>The <command>repl</> command will reply to whatever your
>+      <para>The <command>repl</command> command will reply to whatever your
> 	current message is, unless you give it a different message to
>-	reply to. <command>repl</> will do its best to go ahead and
>+	reply to. <command>repl</command> will do its best to go ahead and
> 	fill in some of the email headers already. So you will notice
>-	that the <literal>To:</> header already has the address of the
>-	recipient in there. Also the <literal>Subject:</> line will
>+	that the <literal>To:</literal> header already has the address of the
>+	recipient in there. Also the <literal>Subject:</literal> line will
> 	already be filled in.  You then go about the normal message
> 	composition process and you are done. One useful command line
> 	option to know here is the <option>-cc</option> option. You
>-	can use <parameter>all</>, <parameter>to</>, <parameter>cc</>,
>-	<parameter>me</> after the <option>-cc</option> option to have
>-	<command>repl</> automatically add the various addresses to
>+	can use <parameter>all</parameter>, <parameter>to</parameter>, <parameter>cc</parameter>,
>+	<parameter>me</parameter> after the <option>-cc</option> option to have
>+	<command>repl</command> automatically add the various addresses to
> 	the cc list in the message. You have probably noticed that the
> 	original message isn't included. This is because most MH
> 	setups are configured to do this from the start.</para>
>     </sect2>
> 
>     <sect2>
>-      <title><filename>components</>, and
>-	<filename>replcomps</>&mdash;components files for
>-	<command>comp</> and <command>repl</></title>
>+      <title><filename>components</filename>, and
>+	<filename>replcomps</filename>&mdash;components files for
>+	<command>comp</command> and <command>repl</command></title>
> 
>-      <para>The <filename>components</> file is usually in
>+      <para>The <filename>components</filename> file is usually in
> 	<filename>/usr/local/lib/mh</filename>. You can copy that file
> 	into your MH Mail directory and edit to contain what you want
> 	it to contain. It is a fairly basic file. You have various
> 	email headers at the top, a dashed line and then nothing. The
> 	<command>comp</command> command just copies this
>-	<filename>components</> file and then edits it. You can add
>+	<filename>components</filename> file and then edits it. You can add
> 	any kind of valid RFC822 header you want. For instance you
>-	could have something like this in your <filename>components</>
>+	could have something like this in your <filename>components</filename>
> 	file:</para>
> 
>       <informalexample>
>@@ -729,13 +729,13 @@
>       </informalexample>
> 
>       <para>MH would then copy this components file and throw you into
>-	your editor. The <filename>components</> file is fairly
>+	your editor. The <filename>components</filename> file is fairly
> 	simple.  If you wanted to have a signature on those messages
> 	you would just put your signature in that
>-	<filename>components</> file.</para>
>+	<filename>components</filename> file.</para>
> 
>-      <para>The <filename>replcomps</> file is a bit more complex. The
>-	default <filename>replcomps</> looks like this:</para>
>+      <para>The <filename>replcomps</filename> file is a bit more complex. The
>+	default <filename>replcomps</filename> looks like this:</para>
> 
>       <informalexample>
> 	<screen>%(lit)%(formataddr %&lt;{reply-to}%?{from}%?{sender}%?{return-path}%&gt;)\
>@@ -752,12 +752,12 @@
>       </informalexample>
> 
>       <para>It's in the same basic format as the
>-	<filename>components</> file but it contains quite a few extra
>-	formatting codes. The <literal>%(lit)</> command makes room
>-	for the address. The <literal>%(formataddr</> is a function
>+	<filename>components</filename> file but it contains quite a few extra
>+	formatting codes. The <literal>%(lit)</literal> command makes room
>+	for the address. The <literal>%(formataddr</literal> is a function
> 	that returns a proper email address. The next part is
> 	<literal>%&lt;</literal> which means if and the
>-	<literal>{reply-to}</> means the reply-to field in the
>+	<literal>{reply-to}</literal> means the reply-to field in the
> 	original message. So that might be translated this way:</para>
> 
>       <informalexample>
>@@ -774,7 +774,7 @@
> 	variables mean. All of the information on writing these format
> 	strings is in the MH-Format man page. The really nice thing is
> 	that once you have built your customized
>-	<filename>replcomps</> file you won't need to touch it again.
>+	<filename>replcomps</filename> file you won't need to touch it again.
> 	No other email program really gives you the power and
> 	flexibility that MH gives you.</para>
>     </sect2>

Actions: View | Diff

Attachments on bug 20183: 9970 | 9971 | 9972 | 9973 | 9974 | 9975