Bug 105511

Summary: AMD64 Motherboard Page Update - HP Pavilion dv8000 Laptop
Product: Documentation Reporter: Scot Hetzel <swhetzel>
Component: Books & ArticlesAssignee: Pav Lucistnik <pav>
Status: Closed FIXED    
Severity: Affects Only Me    
Priority: Normal    
Version: Latest   
Hardware: Any   
OS: Any   

Description Scot Hetzel 2006-11-14 08:20:12 UTC 
Manufacturer: HP
Model: Pavilion dv8135nr  (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00585596&lc=en&cc=us&lang=en&y=6&x=5&dlc=en&product=1818492)
Chipset/Socket: ATI Technologies Inc
Submitter: Scot Hetzel (swhetzel@gmail.com)
Tested FreeBSD Versions: 6.1-RELEASE, 6.1-STABLE thur 6.2-Beta2, 7.0-CURRENT
 
 Notes:
 This Laptop will not boot correctly from a FreeBSD/amd64 install CD (tried 6.1-RC, and 6.2-Beta2 boot CDs), as the boot loader crashes, and continuosly spams the display with unreadable hex dump.  To install FreeBSD/amd64 on this laptop you will need to press the spacebar until the system beeps or when you see "/boot/kernel/kernel".  The system has no problems booting off the Hard Drive.

Currently there are only a couple of devices that are not supported by native FreeBSD drivers:

ndis0: <Broadcom 802.11g Network Adapter> mem 0xc0204000-0xc0205fff irq 21 at device 2.0 on pci6
ndis0: NDIS API version: 5.1

none0@pci0:20:6:        class=0x070300 card=0x309b103c chip=0x43781002 rev=0x02 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = simple comms
    subclass = generic modem
none1@pci6:4:3: class=0x018000 card=0x309b103c chip=0x8033104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCIxx21 Integrated FlashMedia Controller'
    class    = mass storage
none2@pci6:4:4: class=0x080500 card=0x309b103c chip=0x8034104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    class    = base peripheral

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #2: Sun Nov  5 17:40:38 CST 2006
    swhetzel@hp010:/usr/obj/usr/src/7x/sys/GENERIC.debug
WARNING: WITNESS option enabled, expect reduced performance.
ACPI APIC Table: <PTLTD          APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 Mobile Technology ML-37 (1994.21-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f42  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
  AMD Features2=0x1<LAHF>
usable memory  = 1058349056 (1009 MB)
avail memory = 1019940864 (972 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1a> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <PowerNow! K8> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xc8000000-0xcfffffff,0xc0100000-0xc010ffff irq 17 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ohci0: <ATI SB400 USB Controller> mem 0xc0000000-0xc0000fff irq 19 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xc0001000-0xc0001fff irq 19 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 4 ports with 4 removable, self powered
ehci0: <ATI SB400 USB 2.0 controller> mem 0xc0002000-0xc0002fff irq 19 at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <ATI SB400 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 8 ports with 8 removable, self powered
umass0: <LEXAR MEDIA JUMPDRIVE TRAVELER, class 0/0, rev 2.00/20.00, addr 2> on uhub2
ichsmb0: <SMBus controller> port 0x8400-0x840f mem 0xc0003000-0xc00033ff at device 20.0 on pci0
device_attach: ichsmb0 attach returned 6
atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib3
ndis0: <Broadcom 802.11g Network Adapter> mem 0xc0204000-0xc0205fff irq 21 at device 2.0 on pci6
ndis0: NDIS API version: 5.1
fpudna in kernel mode!
ndis0: Ethernet address: 00:14:a5:72:68:64
cbb0: <TI6411 PCI-CardBus Bridge> mem 0xc0208000-0xc0208fff irq 20 at device 4.0 on pci6
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xc0209000-0xc02097ff,0xc0200000-0xc0203fff irq 23 at device 4.2 on pci6
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 62:3f:02:00:01:52:40:7a
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 62:3f:02:52:40:7a
fwe0: Ethernet address: 62:3f:02:52:40:7a
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
pci6: <mass storage> at device 4.3 (no driver attached)
pci6: <base peripheral> at device 4.4 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xc020a400-0xc020a4ff irq 22 at device 6.0 on pci6
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0f:b0:f5:b1:7c
pcm0: <ATI IXP 400> mem 0xc0003400-0xc00034ff irq 17 at device 20.5 on pci0
pci0: <simple comms, generic modem> at device 20.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd5fff,0xd7800-0xd7fff,0xd8000-0xd8fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FAST]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1994213111 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 95396MB <FUJITSU MHV2100AT PL 008300A1> at ata0-master UDMA100
ad1: 95396MB <FUJITSU MHV2100AT PL 008300A1> at ata0-slave UDMA100
acd0: DVDR <TSSTcorpCD/DVDW TS-L532M/HR08> at ata1-master PIO4
pcm0: <Conexant CX20468-21 AC97 Codec>
(probe0:umass-sim0:0:0:0): Uninitialized Transport 5:2200?
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <LEXAR JD TRAVELER 1000> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 989MB (2026592 512 byte sectors: 64H 32S/T 989C)
Trying to mount root from ufs:/dev/ad0s3a
fpudna in kernel mode!
fpudna in kernel mode!
fpudna in kernel mode!
fpudna in kernel mode!
fpudna in kernel mode!

Fix: 

This probably belongs on it's own page:

   FreeBSD/amd64 Project -- Laptops

Where we could list the supported Laptops, and known work arounds to get FreeBSD/amd64 installed on them.
Comment 1 Pav Lucistnik freebsd_committer freebsd_triage 2006-11-14 09:27:55 UTC 
> This probably belongs on it's own page:
> 
>    FreeBSD/amd64 Project -- Laptops
> 
> Where we could list the supported Laptops, and known work arounds to get FreeBSD/amd64 installed on them.

http://gerda.univie.ac.at/freebsd-laptops/index.pl?action=list_laptop_mf&mfid=9

Would this site do? Or I can add it to a separate laptop table at the
bottom of Motherboards page. What do you prefer?

-- 
Pav Lucistnik <pav@oook.cz>
              <pav@FreeBSD.org>

Crucifixion? Good. Out of the door, line on the left, one cross each. Next!
Comment 2 Remko Lodder freebsd_committer freebsd_triage 2006-12-25 11:20:48 UTC 
Responsible Changed
From-To: freebsd-www->pav

Over to maintainer.
Comment 3 Pav Lucistnik freebsd_committer freebsd_triage 2006-12-30 15:27:50 UTC 
State Changed
From-To: open->closed

Entry added
Comment 4 dfilter service freebsd_committer freebsd_triage 2006-12-30 15:39:03 UTC 
pav         2006-12-30 15:38:57 UTC

  FreeBSD doc repository

  Modified files:
    en/platforms/amd64   motherboards.sgml 
  Log:
  - Add a new Notebooks table at the end of the page and fill in a first entry -
    Pavilion dv8135nr.  This should get a separate page once there's more than a
    few entries.
  
  PR:             www/105511
  Submitted by:   Scot Hetzel <swhetzel@gmail.com>
  
  Revision  Changes    Path
  1.107     +25 -1     www/en/platforms/amd64/motherboards.sgml
_______________________________________________
cvs-all@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/cvs-all
To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org"