Bug 107588

Manufacturer: HP
Model: Compaq nx6125 (EJ884PA#ABG) (discontined but some details available via http://h20331.www2.hp.com/hpsub/cache/328381-0-0-225-121.html )
Chipset/Socket: ATI Technologies Inc
BIOS: 68DTT Ver. F.07
Tested FreeBSD Versions: 6.1-RELEASE thru 6.2-PRERELEASE, 7.0-CURRENT

Broadcom WLAN works via NDIS (not in following dmesg):
ndis0: <Broadcom 802.11g Network Adapter> mem 0xd0010000-0xd0011fff irq 22 at device 2.0 on pci2
ndis0: NDIS API version: 5.1

Firewire probes but untested (and not in following dmesg):
fwohci0: <1394 Open Host Controller Interface> mem 0xd0013000-0xd00137ff,0xd0014000-0xd0017fff irq 21 at device 4.2 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3f:99:29:99:44:0a
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:99:44:0a
fwe0: Ethernet address: 02:02:3f:99:44:0a
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)

Bluetooth works:
ubt0: Broadcom HP integrated Bluetooth module, rev 1.10/0.17, addr 2
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 4) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=64; nframes=5, buffer size=320

Unsupported devices: WinModem, Flash card-reader, Fingerprint scanner:
none1@pci0:20:6:        class=0x070300 card=0x308b103c chip=0x43781002 rev=0x02 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = simple comms
    subclass = generic modem
none5@pci2:4:3: class=0x018000 card=0x308b103c chip=0x8033104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCIxx21 Integrated FlashMedia Controller'
    class    = mass storage
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), ATI(0x0000), rev 1.00
 port 1 addr 2: full speed, power 100 mA, config 1, Fingerprint Sensor(0x2580), vendor 0x08ff(0x08ff), rev 6.21

X.org does not have accelerated support for the ATI Radeon XPRESS 200M 5955.  Switching between X and VTYs occasionally produces a corrupt display but closing and opening the lid almost always fixes this.

DVD does not appear to work in DMA mode.

powerd causes random hard lockups (there is a problem with speed changing under load)

Suspend doesn't work (either spins or panics)

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #23: Fri Oct 27 09:36:46 EST 2006
    root@turion.vk2pj.dyndns.org:/usr/obj/usr/src/sys/turion
ACPI APIC Table: <HP     0944    >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 Mobile ML-40                  (2194.52-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f42  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
  AMD Features2=0x1<LAHF>
real memory  = 939327488 (895 MB)
avail memory = 898609152 (856 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
acpi0: <HP 0944> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <PowerNow! K8> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci16: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci32: <ACPI PCI bus> on pcib3
ohci0: <ATI SB400 USB Controller> mem 0xd0800000-0xd0800fff irq 19 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xd0801000-0xd0801fff irq 19 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <ATI SB400 USB 2.0 controller> mem 0xd0802000-0xd0802fff irq 19 at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <ATI SB400 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3010-0x301f irq 16 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5705 A3, ASIC rev. 0x3003> mem 0xd0000000-0xd000ffff irq 23 at device 1.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:0f:b0:b9:6a:45
pci2: <network> at device 2.0 (no driver attached)
cbb0: <PCI-CardBus Bridge> mem 0xd0012000-0xd0012fff irq 20 at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci2: <serial bus, FireWire> at device 4.2 (no driver attached)
pci2: <mass storage> at device 4.3 (no driver attached)
pci2: <base peripheral> at device 4.4 (no driver attached)
pcm0: <ATI IXP 400> mem 0xd0804000-0xd08040ff irq 17 at device 20.5 on pci0
pci0: <simple comms, generic modem> at device 20.6 (no driver attached)
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: vendor 0x08ff Fingerprint Sensor, rev 1.10/6.21, addr 2
Timecounter "TSC" frequency 2194517593 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <FUJITSU MHV2080AH 00830096> at ata0-master UDMA100
acd0: DVDR <TSSTcorpCD/DVDW TS-L532M/HR08> at ata1-master PIO4
pcm0: <Conexant CX20468-21 AC97 Codec>
bus_dmamem_alloc failed to align memory properly.bus_dmamem_alloc failed to align memory properly.
hwpmc: TSC/1/0x20<REA> K8/4/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA>
Trying to mount root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TSSTcorp CD/DVDW TS-L532M HR08> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Incompatible medium installed

Fix: 

n/a
How-To-Repeat: 	n/a