Bug 120435

Summary: FreeBSD/amd64 Project -- motherboards UPDATE REQUEST
Product: Documentation Reporter: Alexander Konovalenko <alexkono2000>
Component: Books & ArticlesAssignee: Gavin Atkinson <gavin>
Status: Closed FIXED    
Severity: Affects Only Me    
Priority: Normal    
Version: Latest   
Hardware: Any   
OS: Any   

Description Alexander Konovalenko 2008-02-09 00:30:03 UTC 
I report following motherboard functioning on FreeBSD:

Manufacturer:
 Gigabyte

Model:
 GA-MA770-DS3

Chipset/Socket:
 AMD 770, socket AM2+

Submitter:
 Alexander Konovalenko

FreeBSD ver: 6.3-PRERELEASE (amd64)

Notes:
 Tested with AMD Phenom (SMP mode) and 4Gb memory dual channel. SATA works, raid  not tested, sound not tested. On-board ethernet works. ACPI enabled though not fully tested.
Comment 1 Mark Linimon freebsd_committer freebsd_triage 2008-02-09 03:38:23 UTC 
Responsible Changed
From-To: freebsd-amd64->freebsd-www

This applies to the web pages.
Comment 2 Gavin Atkinson freebsd_committer freebsd_triage 2008-06-03 00:07:19 UTC 
State Changed
From-To: open->feedback

To submitter: Is there any chance you could provide a dmesg 
from this system?
Comment 3 Gavin Atkinson freebsd_committer freebsd_triage 2008-06-03 00:07:19 UTC 
Responsible Changed
From-To: freebsd-www->gavin

I'm putting together a patch for these
Comment 4 Gavin Atkinson freebsd_committer freebsd_triage 2008-06-03 16:08:28 UTC 
-------- Forwarded Message --------
From: Alexander Konovalenko <alexkono2000@yahoo.com>
To: gavin@FreeBSD.org
Subject: Re: www/120435: FreeBSD/amd64 Project -- motherboards UPDATE
REQUEST
Date: Tue, 3 Jun 2008 07:23:56 -0700 (PDT)

Hi,

 I have upgraded my system from 6.3 to 7.0, but anyway
see my dmesg below.

regards,
 Alexander Konovalenko



Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California.
All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE #1: Thu Apr 17 01:34:14 UTC 2008   user@xxxxxxx.org:/usr/obj/usr/src/sys/BEAST64SMP-ULE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Phenom(tm) 9600 Quad-Core Processor (2310.54-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f22  Stepping = 2
 
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,<b23>>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,<b26>,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,<b5>,<b6>,<b7>,Prefetch,<b9>,<b10>>
  Cores per package: 4
usable memory = 4279926784 (4081 MB)
avail memory  = 4126412800 (3935 MB)
ACPI APIC Table: <GBT    GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
netsmb_dev: loaded
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Apr 17 2008 01:33:57)
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dfde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 10.0 on pci0
pci1: <PCI bus> on pcib1
re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xee00-0xeeff mem 0xfdfff000-0xfdffffff irq 18 at device 0.0 on pci1
re0: Using 2 MSI messages
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:1d:7d:aa:ad:b1
re0: [FILTER]
re0: [FILTER]
atapci0: <ATI ATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17 at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1
usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff at device 6.0 on pci2
wi0: <Intersil Prism2.5> mem 0xfcfff000-0xfcffffff irq 21 at device 7.0 on pci2
wi0: [ITHREAD]
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: Ethernet address: 00:09:5b:2f:02:71
fwohci0: <Texas Instruments TSB43AB23> mem
0xfddff000-0xfddff7ff,0xfddf8000-0xfddfbfff irq 22 at device 14.0 on pci2
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:f1:d1:b9:00:00:1d:7d
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xd72f8000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:f1:d1:00:1d:7d
fwe0: Ethernet address: 02:f1:d1:00:1d:7d
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:f1:d1:b9:00:00:1d:7d @0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
cryptosoft0: <software crypto> on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable
firewire0: 1
nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
, rule-based forwarding disabled, default to accept, logging disabled
hptrr: no controller detected.
acd0: DVDR <Optiarc DVD RW AD-7170A/1.03> at ata0-master UDMA66
ad4: 238474MB <SAMSUNG HD252KJ CM100-12> at ata2-master UDMA33
ad5: 238475MB <SAMSUNG HD252KJ CM100-12> at ata2-slave UDMA33
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
GEOM_ELI: Device ad4s1g.eli created.
GEOM_ELI: Encryption: AES-CBC 128
GEOM_ELI:     Crypto: software
module_register: module pci/ichss_pci already exists!
Module pci/ichss_pci failed to register: 17
module_register: module cpu/ichss already exists!
Module cpu/ichss failed to register: 17
module_register: module cpu/est already exists!
Module cpu/est failed to register: 17
module_register: module cpu/p4tcc already exists!
Module cpu/p4tcc failed to register: 17
module_register: module cpu/powernow already exists!
Module cpu/powernow failed to register: 17
Comment 5 Gavin Atkinson freebsd_committer freebsd_triage 2008-06-03 16:08:39 UTC 
State Changed
From-To: feedback->open

Feedback provided, thanks!
Comment 6 dfilter service freebsd_committer freebsd_triage 2008-06-13 10:03:32 UTC 
remko       2008-06-13 09:03:27 UTC

  FreeBSD doc repository

  Modified files:
    en/platforms/amd64   motherboards.sgml 
  Log:
  Add a few motherboards to the list of tested amd64 boards:
  
  - Add ASRock ALiveNF6G-DVI (tested with 7.0-PRERELEASE)
    PR:             www/121054
  Submitted by:   Svein Skogen <svein@d80.iso100.no>
  
  - Add Asus A8V-Deluxe (tested with 6.2-STABLE)
    PR:             www/115516
  Submitted by:   Martin Matuska <mm@FreeBSD.org>
  
  - Add Gigabyte GA-MA770-DS3 motherboard (tested with 6.3-PRERELEASE)
    PR:             www/120435
  Submitted by:   Alexander Konovalenko <alexkono2000@yahoo.com>
  
  - Add Gigabyte GA-P35-DS4 (tested with 7.0-STABLE)
    PR:             www/121613
  Submitted by:   Torsten Hantzsche <thantzsche@kabelmail.de>
  
  - Add Intel DG31PR motherboard (tested with 7.0-RELEASE)
    PR:             www/124298
  Submitted by:   Paul J Murphy <paul@inetstat.net>
  
  - Add Intel DG965RYCK motherboard (tested with 7.0-CURRENT)
    PR:             www/116805
  Submitted by:   TJ Varghese <tjvarghese@gmail.com>
  
  - Add MSI K9N SLI Platinum (tested with 6.3-RELEASE)
    PR:             www/121069
  Submitted by:   Diego Arias <dak.col@gmail.com>
  
  - Add MSI P6N-Platinum (tested with 6.2-RELEASE)
    PR:             www/119177
  Submitted by:   comperr <comperr@gmail.com>
  
  - Add the Sun Blade X6220 (Tested with 7.0-RELEASE)
    PR:             www/124246
  Submitted By:   Gavin Akkinson <gavin@FreeBSD.org>
  
  - Add the Sun Blade X8420 (Tested with 7.0-RELEASE)
    PR:             www/123307
  Submitted By:   Gavin Akkinson <gavin@FreeBSD.org>
  
  All patches were created/bundled by:    gavin
  
  Revision  Changes    Path
  1.140     +93 -1     www/en/platforms/amd64/motherboards.sgml
_______________________________________________
cvs-all@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/cvs-all
To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org"
Comment 7 Gavin Atkinson freebsd_committer freebsd_triage 2008-06-13 12:08:02 UTC 
State Changed
From-To: open->closed

Close, remko@ has committed a patch.  Thanks for your submission