Bug 126618

Summary: Motherboard report: Gigabyte
Product: Documentation Reporter: Terry R. Friedrichsen <bsd>
Component: Books & ArticlesAssignee: Gavin Atkinson <gavin>
Status: Closed FIXED    
Severity: Affects Only Me    
Priority: Normal    
Version: Latest   
Hardware: Any   
OS: Any   

Description Terry R. Friedrichsen 2008-08-18 07:00:14 UTC 
Model:  Gigabyte GA-MA790X-DS4 rev 1.0

Northbridge chipset/socket:  AM790X, socket AM2.

Boots and runs well with quad-CPU Phenom (9750) and 4 GB ECC memory, SATA and IDE drives.  Sound, serial, USB, Firewire, RAID untested.  On-board RealTek Ethernet flaky; using PCI card instead.

How-To-Repeat: FreeBSD homebox.bunker-ranch.com 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008     root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  amd64
% /sbin/dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
    root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Phenom(tm) 9750 Quad-Core Processor (2410.99-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f23  Stepping = 3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,<b23>>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,<b26>,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,<b5>,<b6>,<b7>,Prefetch,<b9>,<b10>>
  Cores per package: 4
usable memory = 4281028608 (4082 MB)
avail memory  = 4127543296 (3936 MB)
ACPI APIC Table: <GBT    GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dfde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xee00-0xeeff mem 0xfdfff000-0xfdffffff irq 18 at device 0.0 on pci1
re0: Using 2 MSI messages
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:1f:d0:20:ad:4e
re0: [FILTER]
re0: [FILTER]
atapci0: <ATI ATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17 at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xdf00-0xdf7f mem 0xfd7ff000-0xfd7ff07f irq 20 at device 6.0 on pci2
miibus1: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus1
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:10:4b:0a:68:9b
xl0: [ITHREAD]
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xfd7f8000-0xfd7fbfff,0xfc800000-0xfcffffff irq 21 at device 7.0 on pci2
fwohci0: <Texas Instruments TSB43AB23> mem 0xfd7fe000-0xfd7fe7ff,0xfd7f4000-0xfd7f7fff irq 22 at device 14.0 on pci2
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:2a:ae:35:00:00:1f:d0
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xd72f4000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:2a:ae:00:1f:d0
fwe0: Ethernet address: 02:2a:ae:00:1f:d0
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:2a:ae:35:00:00:1f:d0 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
hptrr: no controller detected.firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)

acd0: CDRW <SONY CD-RW CRX320EE/RYK4> at ata0-master UDMA33
ad1: 190781MB <Seagate ST3200822A 3.01> at ata0-slave UDMA100
ad4: 476940MB <Seagate ST3500320AS SD15> at ata2-master UDMA33
ad5: 476940MB <Seagate ST3500320AS SD15> at ata2-slave UDMA33
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Trying to mount root from ufs:/dev/ad4s1a
Comment 1 Gavin Atkinson freebsd_committer freebsd_triage 2008-08-29 16:14:23 UTC 
Responsible Changed
From-To: freebsd-www->gavin

I'll create a patch for these
Comment 2 Gavin Atkinson freebsd_committer freebsd_triage 2008-08-30 15:41:46 UTC 
State Changed
From-To: open->feedback

To submitter: could you please provide the output of 
"pciconf -lv"?  Thanks!
Comment 3 dfilter service freebsd_committer freebsd_triage 2008-11-27 07:54:11 UTC 
remko       2008-11-27 07:54:03 UTC

  FreeBSD doc repository

  Modified files:
    en/platforms/amd64   motherboards.sgml 
  Log:
  Add a few motherboards to the list of tested amd64 boards:
  
  - Add Gigabyte GA-MA790X-DS4 (tested with 7.0-PRERELEASE)
    PR:             www/126618
    Submitted by:   Terry R. Friedrichsen <bsd@bunker-ranch.com>
  
  - Add Gigabyte GA-P35-DS3L (tested with 7.0-STABLE)
    PR:             www/124652
    Submitted by:   Ben Kaduk <minimarmot@gmail.com>
  
  - Add Sun Fire X2100 M2 (tested with 7.0-PRERELEASE)
    PR:             www/125559
    Submitted by:   Markus Frohlich <markus@marfr.de>
  
  - Add Tyan Tiger K9HE (tested with 7.0-RELEASE)
    PR:             www/125092
    Submitted by:   Chris Shenton <chris@shenton.org>
  
  - Add Sony Vaio VGN-TZ31WN/B laptop (tested with 7.0-STABLE-200807)
    PR:             www/126925
    Submitted by:   gavin
  
  While here, expand the information requested for new submissions.
  
  Patch provided by:      Gavin
  
  Revision  Changes    Path
  1.143     +57 -3     www/en/platforms/amd64/motherboards.sgml
_______________________________________________
cvs-all@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/cvs-all
To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org"
Comment 4 Gavin Atkinson freebsd_committer freebsd_triage 2008-12-02 13:13:25 UTC 
State Changed
From-To: feedback->closed

Patch committed by remko@.  To submitter: it would still be useful if you 
could provide the output of "pciconf -lv"