Bug 136836
| Summary: | [ath] atheros card stops functioning after about 12 hours uptime | ||
|---|---|---|---|
| Product: | Base System | Reporter: | Wes Morgan <morganw> |
| Component: | wireless | Assignee: | freebsd-wireless (Nobody) <wireless> |
| Status: | Open --- | ||
| Severity: | Affects Only Me | ||
| Priority: | Normal | ||
| Version: | 8.0-BETA1 | ||
| Hardware: | Any | ||
| OS: | Any | ||
Responsible Changed From-To: freebsd-bugs->freebsd-net Over to maintainer(s). These messages show up in syslog indicating that the card has stopped working: Jul 17 06:35:57 catalyst wpa_supplicant[491]: CTRL-EVENT-EAP-STARTED EAP authentication started Jul 17 06:35:57 catalyst wpa_supplicant[491]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected Jul 17 06:35:57 catalyst wpa_supplicant[491]: OpenSSL: tls_connection_handshake - Failed to read possible Application Data error:00000000:lib(0):func(0):reason(0) Jul 17 06:35:58 catalyst wpa_supplicant[491]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully Jul 17 06:35:58 catalyst wpa_supplicant[491]: WPA: EAPOL-Key Replay Counter did not increase - dropping packet Jul 17 06:35:59 catalyst wpa_supplicant[491]: WPA: Failed to set PTK to the driver. Jul 17 06:35:59 catalyst wpa_supplicant[491]: WPA: Key negotiation completed with 00:40:10:10:00:03 [PTK=CCMP GTK=CCMP] Jul 17 06:37:16 catalyst kernel: nfs server 192.168.0.1:/usr/home/media: not responding Jul 17 06:39:44 catalyst wpa_supplicant[491]: CTRL-EVENT-SCAN-RESULTS Jul 17 06:41:14 catalyst wpa_supplicant[491]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Jul 17 06:41:14 catalyst kernel: wlan0: link state changed to DOWN Jul 17 06:41:15 catalyst kernel: wlan0: link state changed to UP Jul 16 08:00:26 catalyst wpa_supplicant[31662]: CTRL-EVENT-EAP-STARTED EAP authentication started Jul 16 08:00:26 catalyst wpa_supplicant[31662]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected Jul 16 08:00:26 catalyst wpa_supplicant[31662]: OpenSSL: tls_connection_handshake - Failed to read possible Application Data error:00000000:lib(0):func(0):reason(0) Jul 16 08:00:26 catalyst wpa_supplicant[31662]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully Jul 16 08:00:26 catalyst wpa_supplicant[31662]: WPA: EAPOL-Key Replay Counter did not increase - dropping packet Jul 16 08:00:27 catalyst wpa_supplicant[31662]: WPA: Failed to set PTK to the driver. Jul 16 08:00:27 catalyst wpa_supplicant[31662]: WPA: Key negotiation completed with 00:40:10:10:00:03 [PTK=CCMP GTK=CCMP] Jul 16 08:01:45 catalyst kernel: nfs server 192.168.0.1:/usr/home/media: not responding Jul 15 06:25:31 catalyst wpa_supplicant[495]: CTRL-EVENT-EAP-STARTED EAP authentication started Jul 15 06:25:31 catalyst wpa_supplicant[495]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected Jul 15 06:25:31 catalyst wpa_supplicant[495]: OpenSSL: tls_connection_handshake - Failed to read possible Application Data error:00000000:lib(0):func(0):reason(0) Jul 15 06:25:31 catalyst wpa_supplicant[495]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully Jul 15 06:25:31 catalyst wpa_supplicant[495]: WPA: EAPOL-Key Replay Counter did not increase - dropping packet Jul 15 06:25:32 catalyst wpa_supplicant[495]: WPA: Failed to set PTK to the driver. Jul 15 06:25:32 catalyst wpa_supplicant[495]: WPA: Key negotiation completed with 00:40:10:10:00:03 [PTK=CCMP GTK=CCMP] Jul 15 06:26:50 catalyst kernel: nfs server 192.168.0.1:/usr/home/media: not responding These messages show up in syslog indicating that the card has stopped working: Jul 17 06:35:57 catalyst wpa_supplicant[491]: CTRL-EVENT-EAP-STARTED EAP authentication started Jul 17 06:35:57 catalyst wpa_supplicant[491]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected Jul 17 06:35:57 catalyst wpa_supplicant[491]: OpenSSL: tls_connection_handshake - Failed to read possible Application Data error:00000000:lib(0):func(0):reason(0) Jul 17 06:35:58 catalyst wpa_supplicant[491]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully Jul 17 06:35:58 catalyst wpa_supplicant[491]: WPA: EAPOL-Key Replay Counter did not increase - dropping packet Jul 17 06:35:59 catalyst wpa_supplicant[491]: WPA: Failed to set PTK to the driver. Jul 17 06:35:59 catalyst wpa_supplicant[491]: WPA: Key negotiation completed with 00:40:10:10:00:03 [PTK=CCMP GTK=CCMP] Jul 17 06:37:16 catalyst kernel: nfs server 192.168.0.1:/usr/home/media: not responding Jul 17 06:39:44 catalyst wpa_supplicant[491]: CTRL-EVENT-SCAN-RESULTS Jul 17 06:41:14 catalyst wpa_supplicant[491]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Jul 17 06:41:14 catalyst kernel: wlan0: link state changed to DOWN Jul 17 06:41:15 catalyst kernel: wlan0: link state changed to UP Jul 16 08:00:26 catalyst wpa_supplicant[31662]: CTRL-EVENT-EAP-STARTED EAP authentication started Jul 16 08:00:26 catalyst wpa_supplicant[31662]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected Jul 16 08:00:26 catalyst wpa_supplicant[31662]: OpenSSL: tls_connection_handshake - Failed to read possible Application Data error:00000000:lib(0):func(0):reason(0) Jul 16 08:00:26 catalyst wpa_supplicant[31662]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully Jul 16 08:00:26 catalyst wpa_supplicant[31662]: WPA: EAPOL-Key Replay Counter did not increase - dropping packet Jul 16 08:00:27 catalyst wpa_supplicant[31662]: WPA: Failed to set PTK to the driver. Jul 16 08:00:27 catalyst wpa_supplicant[31662]: WPA: Key negotiation completed with 00:40:10:10:00:03 [PTK=CCMP GTK=CCMP] Jul 16 08:01:45 catalyst kernel: nfs server 192.168.0.1:/usr/home/media: not responding Jul 15 06:25:31 catalyst wpa_supplicant[495]: CTRL-EVENT-EAP-STARTED EAP authentication started Jul 15 06:25:31 catalyst wpa_supplicant[495]: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 13 (TLS) selected Jul 15 06:25:31 catalyst wpa_supplicant[495]: OpenSSL: tls_connection_handshake - Failed to read possible Application Data error:00000000:lib(0):func(0):reason(0) Jul 15 06:25:31 catalyst wpa_supplicant[495]: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully Jul 15 06:25:31 catalyst wpa_supplicant[495]: WPA: EAPOL-Key Replay Counter did not increase - dropping packet Jul 15 06:25:32 catalyst wpa_supplicant[495]: WPA: Failed to set PTK to the driver. Jul 15 06:25:32 catalyst wpa_supplicant[495]: WPA: Key negotiation completed with 00:40:10:10:00:03 [PTK=CCMP GTK=CCMP] Jul 15 06:26:50 catalyst kernel: nfs server 192.168.0.1:/usr/home/media: not responding Responsible Changed From-To: freebsd-net->freebsd-wireless punt to freebsd-wireless batch change: For bugs that match the following - Status Is In progress AND - Untouched since 2018-01-01. AND - Affects Base System OR Documentation DO: Reset to open status. Note: I did a quick pass but if you are getting this email it might be worthwhile to double check to see if this bug ought to be closed. |
Atheros 5212 card attaches, associates to a network and works fine for about 12 hours. Then the card seems to lose some functions. Restarting the device with "/etc/rc.d/netif restart" results in wpa_supplicant negotiating a key, but dhclient is unable to acquire a lease. The dhcp server indicates that it is receiving the requests and sending replies, but the client never receives them. Tcpdump of the device does show some broadcast traffic being received, which indicates that the card is associated and decrypting traffic. Manually assigning an IP address has no effect. Pings, traceroutes with tcp, udp and icmp all fail to show up on the network. Bringing the interface up and down has no effect. Removing the kernel module has no effect, with the ath0 interface itself lingering, sometimes causing a panic or freeze very shortly after (can't tell from X). Removing the card and re-attaching sometimes restores functionality. Verbose dmesg: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-BETA1 #1: Tue Jul 14 21:30:04 CDT 2009 root@catalyst:/usr/obj/usr/src/sys/CATALYST Preloaded elf kernel "/boot/kernel/kernel" at 0xb1183000. Preloaded elf module "/boot/kernel/zfs.ko" at 0xb1183248. Preloaded elf module "/boot/kernel/opensolaris.ko" at 0xb11832f0. Preloaded elf module "/boot/kernel/krpc.ko" at 0xb11833a0. Preloaded elf module "/boot/kernel/if_ath.ko" at 0xb118344c. Preloaded elf module "/boot/kernel/snd_hda.ko" at 0xb11834f8. Preloaded elf module "/boot/kernel/sound.ko" at 0xb11835a4. Preloaded elf module "/boot/kernel/coretemp.ko" at 0xb1183650. Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xb1183700. Preloaded elf module "/boot/kernel/acpi_toshiba.ko" at 0xb1183758. Preloaded elf module "/boot/kernel/acpi.ko" at 0xb118380c. Preloaded elf module "/boot/kernel/aio.ko" at 0xb11838b8. Preloaded elf module "/boot/modules/nvidia.ko" at 0xb1183960. Preloaded elf module "/boot/kernel/linux.ko" at 0xb1183a0c. Preloaded elf module "/boot/kernel/cpufreq.ko" at 0xb1183ab8. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1828760703 Hz CPU: Genuine Intel(R) CPU T2400 @ 1.83GHz (1828.76-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,xTPR,PDCM> AMD Features=0x100000<NX> TSC: P-state invariant Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries Data TLB: 4 KB Pages, 4-way set associative, 128 entries Instruction TLB: 4 MB pages, fully associative, 2 entries 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001426000 - 0x00000000cc4aefff, 3406336000 bytes (831625 pages) avail memory = 3404038144 (3246 MB) Table 'FACP' at 0xcff90074 Table 'SSDT' at 0xcff97c5b Table 'BOOT' at 0xcff9004c Table 'APIC' at 0xcff98813 MADT: Found table at 0xcff98813 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) ACPI APIC Table: <TOSHIB A003B > INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 bios32: Found BIOS32 Service Directory header at 0xb00f02c0 bios32: Entry = 0xfca92 (b00fca92) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xd9b3 pnpbios: Found PnP BIOS data at 0xb00f0a20 pnpbios: Entry = f0000:9833 Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID b93cf351 Other BIOS signatures found: ULE: setup cpu 0 ULE: setup cpu 1 This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ ACPI: RSDP 0xf01e0 00014 (v0 TOSHIB) ACPI: RSDT 0xcff90000 00044 (v1 TOSHIB A003B 20060821 TASM 04010000) ACPI: FACP 0xcff90074 00084 (v2 TOSHIB A003B 20060821 TASM 04010000) ACPI: DSDT 0xcff900f8 07B63 (v2 TOSHIB A003B 20070222 MSFT 0100000E) ACPI: FACS 0xeee00 00040 ACPI: SSDT 0xcff97c5b 00306 (v2 TOSHIB A003B 20060907 MSFT 0100000E) ACPI: BOOT 0xcff9004c 00028 (v1 TOSHIB A003B 20060821 TASM 04010000) ACPI: APIC 0xcff98813 00068 (v1 TOSHIB A003B 20060821 TASM 04010000) ACPI: MCFG 0xcff9887b 0003C (v1 TOSHIB A003B 20060821 TASM 04010000) ACPI: HPET 0xcff988b7 00038 (v1 TOSHIB A003B 20060821 TASM 04010000) ACPI: SLIC 0xcff98921 00176 (v1 TOSHIB A003B 20060821 TASM 04010000) ACPI: SSDT 0xcff98a97 00076 (v2 TOSHIB A003B 20060912 MSFT 0100000E) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00010000 wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 VESA: information block 56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00 00 01 00 08 72 05 07 01 00 01 1a 01 00 01 2f 01 00 01 00 01 01 01 02 01 03 01 04 01 05 01 0e 01 0f 01 11 01 12 01 14 01 15 01 17 01 18 01 ff ff VESA: 14 mode(s) found VESA: v3.0, 131072k memory, flags:0x1, mode table:0xb08fd5a2 (1000022) VESA: NVIDIA VESA: NVIDIA Corporation G72 Board - ndu10 Chip Rev crypto: <crypto core> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> io: <I/O> random: <entropy source, Software, Yarrow> npx0: INT 16 interface cryptosoft0: <software crypto> on motherboard crypto: assign cryptosoft0 driver id 0, flags 100663296 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 acpi0: <TOSHIB A003B> on motherboard PCIe: Memory Mapped configuration base @ 0xf0000000 pcibios: BIOS version 2.10 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] ACPI Error: Package List length (C) larger than NumElements count (1), truncated 20090521 dsobject-590 acpi0: Power Button (fixed) acpi0: wakeup code va 0xb6b4e000 pa 0x1000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.FNC0.ICH3 -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.EXCB.PEXB -> bus 0 dev 28 func 1 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cfe90000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 Validation 0 10 N 0 10 After Disable 0 255 N 0 10 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 11 Validation 0 11 N 0 3 4 5 6 7 11 After Disable 0 255 N 0 3 4 5 6 7 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 11 Validation 0 11 N 0 3 4 5 6 7 11 After Disable 0 255 N 0 3 4 5 6 7 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 11 Validation 0 11 N 0 3 4 5 6 7 11 After Disable 0 255 N 0 3 4 5 6 7 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 11 Validation 0 11 N 0 3 4 5 6 7 11 After Disable 0 255 N 0 3 4 5 6 7 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 11 Validation 0 11 N 0 3 4 5 6 7 11 After Disable 0 255 N 0 3 4 5 6 7 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 11 Validation 0 11 N 0 3 4 5 6 7 11 After Disable 0 255 N 0 3 4 5 6 7 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 11 Validation 0 11 N 0 3 4 5 6 7 11 After Disable 0 255 N 0 3 4 5 6 7 11 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x27a0, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27a1, revid=0x03 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27d8, revid=0x02 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base r, size 14, memory disabled found-> vendor=0x8086, dev=0x27d0, revid=0x02 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27d2, revid=0x02 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27d4, revid=0x02 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x27c8, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type I/O Port, range 32, base r, size 5, port disabled found-> vendor=0x8086, dev=0x27c9, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 map[20]: type I/O Port, range 32, base r, size 5, port disabled found-> vendor=0x8086, dev=0x27ca, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 map[20]: type I/O Port, range 32, base r, size 5, port disabled found-> vendor=0x8086, dev=0x27cb, revid=0x02 domain=0, bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=255 map[20]: type I/O Port, range 32, base r, size 5, port disabled found-> vendor=0x8086, dev=0x27cc, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base r, size 10, memory disabled found-> vendor=0x8086, dev=0x2448, revid=0xe2 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b9, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27c4, revid=0x02 domain=0, bus=0, slot=31, func=2 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b8, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base rxaf10, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xe0000000-0xefffffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x01da, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base rxfd000000, size 24, enabled pcib1: requested memory range 0xfd000000-0xfdffffff: good map[14]: type Prefetchable Memory, range 64, base rxe0000000, size 28, enabled pcib1: requested memory range 0xe0000000-0xefffffff: good map[1c]: type Memory, range 64, base rxfc000000, size 24, enabled pcib1: requested memory range 0xfc000000-0xfcffffff: good pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1 nvidia0: <Quadro NVS 110M> on vgapci0 vgapci0: child nvidia0 requested pci_enable_busmaster vgapci0: child nvidia0 requested pci_enable_io vgapci0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xfd000000 vgapci0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xe0000000 vgapci0: Reserved 0x1000000 bytes for rid 0x1c type 3 at 0xfc000000 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49 nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] hdac0: <Intel 82801G High Definition Audio Controller> at device 27.0 on pci0 hdac0: HDA Driver Revision: 20090624_0136 hdac0: Lazy allocation of 0x4000 bytes rid 0x10 type 3 at 0xd0000000 hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd0000000 hdac0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 50 hdac0: using IRQ 256 for MSI hdac0: [MPSAFE] hdac0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xffd00000-0xffdfffff pcib2: no prefetched decode pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x8086, dev=0x109a, revid=0x00 domain=0, bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base rxffde0000, size 17, enabled pcib2: requested memory range 0xffde0000-0xffdfffff: good map[18]: type I/O Port, range 32, base rxcfe0, size 5, enabled pcib2: requested I/O range 0xcfe0-0xcfff: in range pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 16 pci2: <network, ethernet> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 4 pcib3: I/O decode 0xb000-0xbfff pcib3: memory decode 0xfa000000-0xfbffffff pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib4: domain 0 pcib4: secondary bus 5 pcib4: subordinate bus 5 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xffc00000-0xffcfffff pcib4: no prefetched decode pci5: <ACPI PCI bus> on pcib4 pci5: domain=0, physical bus=5 found-> vendor=0x8086, dev=0x4222, revid=0x02 domain=0, bus=5, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base rxffcff000, size 12, enabled pcib4: requested memory range 0xffcff000-0xffcfffff: good pcib4: matched entry for 5.0.INTA pcib4: slot 0 INTA hardwired to IRQ 18 pci5: <network> at device 0.0 (no driver attached) uhci0: <UHCI (generic) USB controller> at device 29.0 on pci0 uhci0: Lazy allocation of 0x20 bytes rid 0x20 type 4 at 0x1000 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1000 pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 51 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x0f10 usbus0: <UHCI (generic) USB controller> on uhci0 uhci1: <UHCI (generic) USB controller> at device 29.1 on pci0 uhci1: Lazy allocation of 0x20 bytes rid 0x20 type 4 at 0x1020 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1020 pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 52 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup = 0x0f10 usbus1: <UHCI (generic) USB controller> on uhci1 uhci2: <UHCI (generic) USB controller> at device 29.2 on pci0 uhci2: Lazy allocation of 0x20 bytes rid 0x20 type 4 at 0x1040 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1040 pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53 uhci2: [MPSAFE] uhci2: [ITHREAD] uhci2: LegSup = 0x0f10 usbus2: <UHCI (generic) USB controller> on uhci2 uhci3: <UHCI (generic) USB controller> at device 29.3 on pci0 uhci3: Lazy allocation of 0x20 bytes rid 0x20 type 4 at 0x1060 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1060 pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 uhci3: [MPSAFE] uhci3: [ITHREAD] uhci3: LegSup = 0x0f10 usbus3: <UHCI (generic) USB controller> on uhci3 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> at device 29.7 on pci0 ehci0: Lazy allocation of 0x400 bytes rid 0x10 type 3 at 0xd0004000 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd0004000 pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib5: domain 0 pcib5: secondary bus 6 pcib5: subordinate bus 7 pcib5: I/O decode 0xf000-0xfff pcib5: no prefetched decode pcib5: Subtractively decoded bridge. pci6: <ACPI PCI bus> on pcib5 pci6: domain=0, physical bus=6 found-> vendor=0x104c, dev=0x8039, revid=0x00 domain=0, bus=6, slot=11, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base r, size 12, memory disabled found-> vendor=0x104c, dev=0x803a, revid=0x00 domain=0, bus=6, slot=11, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base r, size 11, memory disabled map[14]: type Memory, range 32, base r, size 14, memory disabled found-> vendor=0x104c, dev=0x803c, revid=0x00 domain=0, bus=6, slot=11, func=3 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=d, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base r, size 8, memory disabled cbb0: <PCI-CardBus Bridge> at device 11.0 on pci6 pcib5: cbb0 requested memory range 0x0-0xffffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xd0005000 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0005000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib5: matched entry for 6.11.INTA pcib5: slot 11 INTA hardwired to IRQ 21 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 54 cbb0: [MPSAFE] cbb0: [FILTER] cbb0: PCI Configuration space: 0x00: 0x8039104c 0x02100007 0x06070000 0x00824008 0x10: 0xd0005000 0x020000a0 0x20070706 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400115 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0800b060 0x02b30019 0x00070000 0x01aa1022 0x90: 0x606404c0 0x00000000 0x00000000 0x00000000 0xa0: 0x7e020001 0x00c00000 0x00000000 0x00000000 0xb0: 0x08000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0xc2094d2a 0xcb0193f7 0x00000000 0x00000000 pci6: <serial bus, FireWire> at device 11.1 (no driver attached) pci6: <base peripheral, SD host controller> at device 11.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xaf10-0xaf1f irq 19 at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xaf10 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x10000 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 56 ata1: [MPSAFE] ata1: [ITHREAD] acpi_lid0: <Control Method Lid Switch> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_toshiba0: <Toshiba HCI Extras> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 58 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model GlidePoint, device ID 0-00, 3 buttons psm0: config:00006000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) cpu0: <ACPI CPU> on acpi0 ACPI: SSDT 0xcff982a3 000F3 (v2 TOSHIB A003B 20060907 MSFT 0100000E) ACPI: SSDT 0xcff9840c 0034E (v2 TOSHIB A003B 20060907 MSFT 0100000E) coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 cpu1: <ACPI CPU> on acpi0 ACPI: SSDT 0xcff98396 00076 (v2 TOSHIB A003B 20060907 MSFT 0100000E) ACPI: SSDT 0xcff9875a 00079 (v2 TOSHIB A003B 20060907 MSFT 0100000E) coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices atrtc: atrtc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 214301 -> 100000 procfs registered WARNING: ZFS is considered to be an experimental feature in FreeBSD. lapic: Divisor 2, Frequency 83125499 hz Timecounter "TSC" frequency 1828760703 Hz quality -100 Timecounters tick every 1.000 msec crypto: <crypto device> Linux ELF exec handler installed pflog0: bpf attached lo0: bpf attached ata0: Identifying devices: 00000001 ata0: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 battery0: battery initialization start battery0: critically low charge! ACPI Warning: \\_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String 20090521 nspredef-1058 battery0: battery initialization done, tried 1 times battery1: battery initialization start acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ZFS filesystem version 13 ZFS storage pool version 13 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad0: 95396MB <TOSHIBA MK1032GSX AS021G> at ata0-master SATA150 ad0: 195371568 sectors [193821C/16H/63S] 16 sectors/interrupt 1 depth queue ata1: Identifying devices: 00010000 ata1: New devices: 00010000 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 GEOM: new disk ad0 ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: <MATSHITADVD-RAM UJ-841S/1.20> DVDR drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc hdac0: Probing codec #0... hdac0: HDA Codec #0: Sigmatel STAC9220 hdac0: HDA Codec ID: 0x83847690 hdac0: Vendor: 0x8384 hdac0: Device: 0x7690 hdac0: Revision: 0x22 hdac0: Stepping: 0x01 hdac0: PCI Subvendor: 0x00011179 hdac0: Found audio FG nid=1 startnode=2 endnode=21 total=19 hdac0: Probing codec #1... hdac0: HDA Codec #1: Lucent/Agere Systems (Unknown) hdac0: HDA Codec ID: 0x11c13026 hdac0: Vendor: 0x11c1 hdac0: Device: 0x3026 hdac0: Revision: 0x07 hdac0: Stepping: 0x00 hdac0: PCI Subvendor: 0x00011179 hdac0: Found modem FG nid=1 startnode=2 endnode=40 total=38 hdac0: hdac0: Processing audio FG cad=0 nid=1... hdac0: GPIO: 0xc0000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1 hdac0: nid 8 0x40f000fd as 15 seq 13 Other None jack 0 loc 0 color Unknown misc 0 hdac0: nid 9 0x40f000fe as 15 seq 14 Other None jack 0 loc 0 color Unknown misc 0 hdac0: nid 13 0x40f000fa as 15 seq 10 Other None jack 0 loc 0 color Unknown misc 0 hdac0: nid 14 0x94011110 as 1 seq 0 Line-out Fixed jack 1 loc 20 color Black misc 1 hdac0: nid 15 0x2181112e as 2 seq 14 Line-in Jack jack 1 loc 33 color Black misc 1 hdac0: nid 16 0x94a11120 as 2 seq 0 Mic Fixed jack 1 loc 20 color Black misc 1 hdac0: nid 17 0x40f000fb as 15 seq 11 Other None jack 0 loc 0 color Unknown misc 0 hdac0: nid 18 0x40f000fc as 15 seq 12 Other None jack 0 loc 0 color Unknown misc 0 hdac0: Patched pins configuration: hdac0: nid 8 0x40f000fd as 15 seq 13 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac0: nid 9 0x40f000fe as 15 seq 14 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac0: nid 13 0x40f000fa as 15 seq 10 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac0: nid 14 0x94011110 as 1 seq 0 Line-out Fixed jack 1 loc 20 color Black misc 1 hdac0: nid 15 0x2181112e as 2 seq 14 Line-in Jack jack 1 loc 33 color Black misc 1 hdac0: nid 16 0x94a11120 as 2 seq 0 Mic Fixed jack 1 loc 20 color Black misc 1 hdac0: nid 17 0x40f000fb as 15 seq 11 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac0: nid 18 0x40f000fc as 15 seq 12 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED] hdac0: 2 associations found: hdac0: Association 0 (1) out: hdac0: Pin nid=14 seq=0 hdac0: Association 1 (2) in: hdac0: Pin nid=16 seq=0 hdac0: Pin nid=15 seq=14 hdac0: Tracing association 0 (1) hdac0: Pin 14 traced to DAC 2 hdac0: Association 0 (1) trace succeeded hdac0: Tracing association 1 (2) hdac0: Pin 16 traced to ADC 3 hdac0: Pin 15 traced to ADC 3 hdac0: Association 1 (2) trace succeeded hdac0: Tracing input monitor hdac0: Tracing beeper hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref hdac0: hdac0: +-------------------+ hdac0: | DUMPING HDA NODES | hdac0: +-------------------+ hdac0: hdac0: Default Parameter hdac0: ----------------- hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07e0 hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac0: IN amp: 0x00000000 hdac0: OUT amp: 0x80051f1f hdac0: hdac0: nid: 2 hdac0: Name: audio output hdac0: Widget cap: 0x000d0401 hdac0: PWR STEREO hdac0: Association: 0 (0x00000001) hdac0: OSS: pcm (pcm) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07e0 hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac0: hdac0: nid: 3 hdac0: Name: audio input hdac0: Widget cap: 0x001d0541 hdac0: PWR PROC STEREO hdac0: Association: 1 (0x00004001) hdac0: Stream cap: 0x00000001 hdac0: PCM hdac0: PCM cap: 0x000e07e0 hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz hdac0: connections: 1 hdac0: | hdac0: + <- nid=10 [audio selector] hdac0: hdac0: nid: 4 [DISABLED] hdac0: Name: audio input hdac0: Widget cap: 0x00140311 hdac0: DIGITAL STEREO hdac0: Stream cap: 0x00000005 hdac0: AC3 PCM hdac0: PCM cap: 0x000e0160 hdac0: 16 20 24 bits, 44 48 96 KHz hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=8 [pin: Other (None)] [DISABLED] hdac0: hdac0: nid: 5 [DISABLED] hdac0: Name: audio output hdac0: Widget cap: 0x00040211 hdac0: DIGITAL STEREO hdac0: Stream cap: 0x00000005 hdac0: AC3 PCM hdac0: PCM cap: 0x000e01e0 hdac0: 16 20 24 bits, 44 48 88 96 KHz hdac0: hdac0: nid: 6 [DISABLED] hdac0: Name: vendor widget hdac0: Widget cap: 0x00f30201 hdac0: DIGITAL STEREO hdac0: hdac0: nid: 7 hdac0: Name: audio selector hdac0: Widget cap: 0x00300901 hdac0: LRSWAP STEREO hdac0: Association: 0 (0x00000001) hdac0: OSS: pcm hdac0: connections: 3 hdac0: | hdac0: + <- nid=2 [audio output] (selected) hdac0: + [DISABLED] <- nid=8 [pin: Other (None)] [DISABLED] hdac0: + [DISABLED] <- nid=10 [audio selector] hdac0: hdac0: nid: 8 [DISABLED] hdac0: Name: pin: Other (None) hdac0: Widget cap: 0x00430681 hdac0: PWR DIGITAL UNSOL STEREO hdac0: Pin cap: 0x00010024 hdac0: PDC IN EAPD hdac0: Pin config: 0x40f000fd hdac0: Pin control: 0x00000000 hdac0: EAPD: 0x00000002 hdac0: hdac0: nid: 9 [DISABLED] hdac0: Name: pin: Other (None) hdac0: Widget cap: 0x00400301 hdac0: DIGITAL STEREO hdac0: Pin cap: 0x00000010 hdac0: OUT hdac0: Pin config: 0x40f000fe hdac0: Pin control: 0x00000000 hdac0: connections: 2 hdac0: | hdac0: + <- nid=5 [audio output] [DISABLED] (selected) hdac0: + <- nid=10 [audio selector] hdac0: hdac0: nid: 10 hdac0: Name: audio selector hdac0: Widget cap: 0x0030090d hdac0: LRSWAP STEREO hdac0: Association: 1 (0x00004001) hdac0: OSS: line, monitor hdac0: Output amp: 0x80050f00 hdac0: mute=1 step=15 size=5 offset=0 hdac0: connections: 1 hdac0: | hdac0: + <- nid=12 [audio selector] hdac0: hdac0: nid: 11 hdac0: Name: audio selector hdac0: Widget cap: 0x00300105 hdac0: STEREO hdac0: Association: 0 (0x00000001) hdac0: OSS: pcm hdac0: Output amp: 0x80051f1f hdac0: mute=1 step=31 size=5 offset=31 hdac0: connections: 1 hdac0: | hdac0: + <- nid=7 [audio selector] hdac0: hdac0: nid: 12 hdac0: Name: audio selector hdac0: Widget cap: 0x0030010d hdac0: STEREO hdac0: Association: 1 (0x00004001) hdac0: OSS: line, monitor hdac0: Output amp: 0x00270400 hdac0: mute=0 step=4 size=39 offset=0 hdac0: connections: 5 hdac0: | hdac0: + <- nid=16 [pin: Mic (Fixed)] (selected) hdac0: + <- nid=15 [pin: Line-in (Black Jack)] hdac0: + [DISABLED] <- nid=14 [pin: Line-out (Fixed)] hdac0: + [DISABLED] <- nid=13 [pin: Other (None)] [DISABLED] hdac0: + [DISABLED] <- nid=18 [pin: Other (None)] [DISABLED] hdac0: hdac0: nid: 13 [DISABLED] hdac0: Name: pin: Other (None) hdac0: Widget cap: 0x00400181 hdac0: UNSOL STEREO hdac0: Pin cap: 0x0000003f hdac0: ISC TRQD PDC HP OUT IN hdac0: Pin config: 0x40f000fa hdac0: Pin control: 0x00000000 hdac0: connections: 1 hdac0: | hdac0: + <- nid=11 [audio selector] hdac0: hdac0: nid: 14 hdac0: Name: pin: Line-out (Fixed) hdac0: Widget cap: 0x00400181 hdac0: UNSOL STEREO hdac0: Association: 0 (0x00000001) hdac0: Pin cap: 0x0000003f hdac0: ISC TRQD PDC HP OUT IN hdac0: Pin config: 0x94011110 hdac0: Pin control: 0x00000040 OUT hdac0: connections: 1 hdac0: | hdac0: + <- nid=11 [audio selector] hdac0: hdac0: nid: 15 hdac0: Name: pin: Line-in (Black Jack) hdac0: Widget cap: 0x00400181 hdac0: UNSOL STEREO hdac0: Association: 1 (0x00004000) hdac0: OSS: line (line) hdac0: Pin cap: 0x00000037 hdac0: ISC TRQD PDC OUT IN hdac0: Pin config: 0x2181112e hdac0: Pin control: 0x00000020 IN hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=11 [audio selector] hdac0: hdac0: nid: 16 hdac0: Name: pin: Mic (Fixed) hdac0: Widget cap: 0x00400181 hdac0: UNSOL STEREO hdac0: Association: 1 (0x00000001) hdac0: OSS: monitor (monitor) hdac0: Pin cap: 0x00001737 hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ] hdac0: Pin config: 0x94a11120 hdac0: Pin control: 0x00000024 IN VREFs hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=11 [audio selector] hdac0: hdac0: nid: 17 [DISABLED] hdac0: Name: pin: Other (None) hdac0: Widget cap: 0x00400104 hdac0: Pin cap: 0x00000010 hdac0: OUT hdac0: Pin config: 0x40f000fb hdac0: Pin control: 0x00000000 hdac0: Output amp: 0x80051f1f hdac0: mute=1 step=31 size=5 offset=31 hdac0: connections: 1 hdac0: | hdac0: + [DISABLED] <- nid=19 [audio mixer] [DISABLED] hdac0: hdac0: nid: 18 [DISABLED] hdac0: Name: pin: Other (None) hdac0: Widget cap: 0x00400001 hdac0: STEREO hdac0: Pin cap: 0x00000020 hdac0: IN hdac0: Pin config: 0x40f000fc hdac0: Pin control: 0x00000000 hdac0: hdac0: nid: 19 [DISABLED] hdac0: Name: audio mixer hdac0: Widget cap: 0x00200100 hdac0: connections: 1 hdac0: | hdac0: + <- nid=7 [audio selector] hdac0: hdac0: nid: 20 hdac0: Name: beep widget hdac0: Widget cap: 0x0070000c hdac0: Association: -2 (0x00000000) hdac0: OSS: speaker (speaker) hdac0: Output amp: 0x80170303 hdac0: mute=1 step=3 size=23 offset=3 hdac0: hdac0: Processing modem FG cad=1 nid=1... hdac0: pcm0: <HDA Sigmatel STAC9220 PCM #0 Analog> at cad 0 nid 1 on hdac0 pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e07e0 pcm0: 16 20 24 bits, 44 48 88 96 176 192 KHz pcm0: DAC: 2 pcm0: pcm0: Record: pcm0: pcm0: Stream cap: 0x00000001 pcm0: PCM pcm0: PCM cap: 0x000e07e0 pcm0: 16 20 24 bits, 44 48 88 96 176 192 KHz pcm0: ADC: 3 pcm0: pcm0: +-------------------------------+ pcm0: | DUMPING Playback/Record Paths | pcm0: +-------------------------------+ pcm0: pcm0: Playback: pcm0: pcm0: nid=14 [pin: Line-out (Fixed)] pcm0: | pcm0: + <- nid=11 [audio selector] [src: pcm] pcm0: | pcm0: + <- nid=7 [audio selector] [src: pcm] pcm0: | pcm0: + <- nid=2 [audio output] [src: pcm] pcm0: pcm0: Record: pcm0: pcm0: nid=3 [audio input] pcm0: | pcm0: + <- nid=10 [audio selector] [src: line, monitor] pcm0: | pcm0: + <- nid=12 [audio selector] [src: line, monitor] pcm0: | pcm0: + <- nid=16 [pin: Mic (Fixed)] [src: monitor] pcm0: + <- nid=15 [pin: Line-in (Black Jack)] [src: line] pcm0: pcm0: +-------------------------+ pcm0: | DUMPING Volume Controls | pcm0: +-------------------------+ pcm0: pcm0: Master Volume (OSS: vol) pcm0: | pcm0: +- ctl 2 (nid 11 out): -46/0dB (32 steps) + mute pcm0: pcm0: PCM Volume (OSS: pcm) pcm0: | pcm0: +- ctl 2 (nid 11 out): -46/0dB (32 steps) + mute pcm0: pcm0: Speaker/Beep Volume (OSS: speaker) pcm0: | pcm0: +- ctl 5 (nid 20 out): -18/0dB (4 steps) + mute pcm0: pcm0: Recording Level (OSS: rec) pcm0: | pcm0: +- ctl 1 (nid 10 out): 0/22dB (16 steps) + mute pcm0: +- ctl 3 (nid 12 out): 0/40dB (5 steps) pcm0: pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "rec": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 15d0000, 4000; 0xf64bd000 -> 15d0000 pcm0: sndbuf_setmap 15e0000, 4000; 0xf64cd000 -> 15e0000 SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010200 err: 0x00010000 pcm: 0x00010000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 49 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 50 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 51 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 1 vector 52 pcib5: requested memory range 0x88000000-0xffffffff: good unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xd0010000 unknown: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd0010000 cbb0: Opening memory: cbb0: Normal: 0xd0010000-0xd001ffff cbb0: Opening memory: pcib5: requested memory range 0xd0010000-0xd001ffff: good cbb0: Opening memory: cbb0: Normal: 0xd0010000-0xd001ffff cbb0: Opening memory: map[10]: type Memory, range 32, base r, size 16, enabled pcib5: requested memory range 0x88000000-0xffffffff: good found-> vendor=0x168c, dev=0x0013, revid=0x01 domain=0, bus=7, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=21 powerspec 2 supports D0 D3 current D0 ath0: <Atheros 5212> mem 0xd0010000-0xd001ffff irq 21 at device 0.0 on cardbus0 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd0010000 cbb0: Opening memory: cbb0: Normal: 0xd0010000-0xd001ffff ath0: [MPSAFE] ath0: [ITHREAD] ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboG rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: sturboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: AR5212 mac 5.9 RF5112 phy 4.3 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons uhub3: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus4 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): Down reving Protocol Version from 2 to 0? (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): CAM Status: SCSI Status Error (probe0:ata1:0:0:0): SCSI Status: Check Condition (probe0:ata1:0:0:0): NOT READY asc:3a,0 (probe0:ata1:0:0:0): Medium not present (probe0:ata1:0:0:0): (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:0:0): NOT READY asc:3a,0 (probe0:ata1:0:0:0): Medium not present Unretryable error (probe0:ata1:0:0:0): error 6 (probe0:ata1:0:0:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: <MATSHITA DVD-RAM UJ-841S 1.20> Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers GEOM: new disk cd0 (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error cd0 at ata1 bus 0 target 0 lun 0 cd0: <MATSHITA DVD-RAM UJ-841S 1.20> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Root mount waiting for: usbus4 Trying to mount root from zfs:tank ugen0.2: <vendor 0x0461> at usbus0 ugen1.2: <STMicroelectronics> at usbus1 ums0: <vendor 0x0461 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 2> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 ct_to_ts([2009-07-16 22:11:47]) = 1247782307.000000000 start_init: trying /sbin/init wlan0: bpf attached wlan0: bpf attached wlan0: Ethernet address: 00:12:17:6e:e3:10 nfslock: pseudo-device link_elf: symbol dev2unit undefined wlan0: link state changed to UP linprocfs registered linsysfs registered battery1: battery initialization failed, giving up KERNEL CONFIG: ident CATALYST maxusers 0 options MAXMEM=(3328*1024) ##################################################################### # CPU OPTIONS cpu I686_CPU # aka Pentium Pro(tm) options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC makeoptions MODULES_OVERRIDE="acpi/acpi acpi/acpi_toshiba \ md ntfs ntfs_iconv linux linprocfs linsysfs zfs \ krpc firewire/firewire firewire/sbp firewire/fwe \ firewire/fwip netgraph/netgraph netgraph/bluetooth \ netgraph/socket mii em firmware sound/sound \ sound/driver/hda ath wpi wpifw opensolaris \ cpufreq coretemp aio" options INCLUDE_CONFIG_FILE # Include this file in kernel nooption KSE options KVA_PAGES=320 ##################################################################### # Scheduler options: # #options SCHED_4BSD options SCHED_ULE options PREEMPTION #options MPTABLE_FORCE_HTT # Enable HTT CPUs with the MP Table #options ADAPTIVE_GIANT # Giant mutex is adaptive. options STOP_NMI # Stop CPUS using NMI instead of IPI ##################################################################### # COMPATIBILITY OPTIONS options SYSVMSG options SYSVSHM options SYSVSEM ##################################################################### # DEBUGGING OPTIONS options KTRACE #kernel tracing speed ##################################################################### # NETWORKING OPTIONS options INET #Internet communications protocols options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol device ether #Generic Ethernet device loop #Network loopback device device bpf #Berkeley packet filter device random device pf #PF OpenBSD packet-filter firewall device pflog #logging support interface for PF options ALTQ options ALTQ_CBQ # Class Bases Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ZERO_COPY_SOCKETS options ACCEPT_FILTER_DATA options ACCEPT_FILTER_HTTP ##################################################################### # FILESYSTEM OPTIONS options FFS #Fast filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options SOFTUPDATES options MSDOSFS options MSDOSFS_ICONV options TMPFS options NFSCLIENT #Network File System client options NFSSERVER #Network File System server options NFSLOCKD #Network Lock Manager options NFSCL #experimental NFS client with NFSv4 options NFSD #experimental NFS server with NFSv4 options CD9660 options CD9660_ICONV options UFS_ACL options UFS_DIRHASH options GEOM_LABEL # Providers labelization. options GEOM_VOL # Volume names from UFS superblock nooption GEOM_BSD # BSD disklabel nooption GEOM_MBR # GPT partitioning #options GEOM_PART_BSD # BSD disklabel options GEOM_PART_GPT # GPT partitioning #options GEOM_PART_MBR # MBR partitioning options LIBICONV ##################################################################### # POSIX P1003.1B options _KPOSIX_PRIORITY_SCHEDULING #options P1003_1B_SEMAPHORES ##################################################################### # CLOCK OPTIONS #options HZ=100 ##################################################################### # SCSI DEVICES device scbus #base SCSI code device da #SCSI direct access devices (aka disks) device cd #SCSI CD-ROMs device pass #CAM passthrough driver ##################################################################### # MISCELLANEOUS DEVICES AND OPTIONS device pty #Pseudo ttys device md #Memory/malloc disk ##################################################################### # crypto subsystem device crypto device cryptodev ##################################################################### # HARDWARE BUS CONFIGURATION device pci device agp ##################################################################### # HARDWARE DEVICE CONFIGURATION device atkbdc device atkbd options KBD_INSTALL_CDEV # install a CDEV entry in /dev device psm options PSM_HOOKRESUME #hook the system resume event, useful options PSM_RESETAFTERSUSPEND #reset the device at the resume event device vga options VESA device speaker #Play IBM BASIC-style noises out your speaker device sc options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode options SC_PIXEL_MODE # add support for the raster text mode options SC_TWOBUTTON_MOUSE device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapicam # emulate ATAPI devices as SCSI ditto via CAM # needs CAM to be present (scbus & pass) # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uart device cbb device pccard device cardbus device wlan device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm How-To-Repeat: Boot, let system run overnight. Wait for network functionality to drop.