Bug 137493
| Summary: | Motherbord submit for web | ||
|---|---|---|---|
| Product: | Documentation | Reporter: | Hennes Passmann <hennes> |
| Component: | Books & Articles | Assignee: | freebsd-doc (Nobody) <doc> |
| Status: | Closed FIXED | ||
| Severity: | Affects Only Me | ||
| Priority: | Normal | ||
| Version: | Latest | ||
| Hardware: | Any | ||
| OS: | Any | ||
State Changed From-To: open->closed The mainboard list has been removed, as it does not serve a useful purpose anymore nowaways. Nontheless, thank you for your submission! |
Gigabyte GA-EX58-UD5 Tested with FreeBSD 8.0 beta2. ON board ethernet fails to link at gigabit speeds (tested with both a netgear GS108 and a Dlink DES132T uplink module). Gb speeds work under XP. Only works for FreeBSD after moving to a 100mbit port. On board ICH10 sata works with CDROM (HDDs are on a 3ware 9690 RAID card) On board Micron JMB363 SATA300 controller untested. Sound untested. Firewire untested. --------------------------------------------------------------------------------- Dmesg follows Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-BETA2 #0: Thu Aug 6 01:53:12 CEST 2009 root@:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (2698.77-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 6442450944 (6144 MB) avail memory = 6177935360 (5891 MB) ACPI APIC Table: <GBT GBTUACPI> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <GBT GBTUACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cfde0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <PCI-PCI bridge> irq 16 at device 3.0 on pci0 pci2: <PCI bus> on pcib2 vgapci0: <VGA-compatible display> port 0xcf00-0xcf7f mem 0xf8000000-0xf8ffffff,0xd0000000-0xdfffffff,0xf6000000-0xf7ffffff irq 16 at device 0.0 on pci2 pcib3: <PCI-PCI bridge> irq 16 at device 5.0 on pci0 pci3: <PCI bus> on pcib3 pcib4: <PCI-PCI bridge> irq 16 at device 7.0 on pci0 pci4: <PCI bus> on pcib4 3ware device driver for 9000 series storage controllers, version: 3.70.05.001 twa0: <3ware 9000 series Storage Controller> port 0xde00-0xdeff mem 0xf4000000-0xf5ffffff,0xfbbff000-0xfbbfffff irq 16 at device 0.0 on pci4 twa0: [ITHREAD] twa0: INFO: (0x15: 0x1300): Controller details:: Model 9690SA-8I, 128 ports, Firmware FH9X 4.06.00.004, BIOS BE9X 4.05.00.015 pcib5: <PCI-PCI bridge> irq 16 at device 9.0 on pci0 pci5: <PCI bus> on pcib5 pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) uhci0: <UHCI (generic) USB controller> port 0xff00-0xff1f irq 16 at device 26.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x0f10 usbus0: <UHCI (generic) USB controller> on uhci0 uhci1: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 21 at device 26.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x0f10 usbus1: <UHCI (generic) USB controller> on uhci1 uhci2: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 18 at device 26.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x0f10 usbus2: <UHCI (generic) USB controller> on uhci2 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbffe000-0xfbffe3ff irq 18 at device 26.7 on pci0 ehci0: [ITHREAD] usbus3: waiting for BIOS to give up control usbus3: EHCI version 1.0 usbus3: <EHCI (generic) USB 2.0 controller> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci7: <ACPI PCI bus> on pcib7 atapci0: <JMicron JMB363 SATA300 controller> mem 0xfb9fe000-0xfb9fffff irq 17 at device 0.0 on pci7 atapci0: [ITHREAD] atapci0: AHCI called from vendor specific driver atapci0: AHCI v1.00 controller with 2 3Gbps ports, PM supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] atapci1: <JMicron JMB363 UDMA133 controller> port 0xbf00-0xbf07,0xbe00-0xbe03,0xbd00-0xbd07,0xbc00-0xbc03,0xbb00-0xbb0f irq 18 at device 0.1 on pci7 atapci1: [ITHREAD] ata4: <ATA channel 0> on atapci1 ata4: [ITHREAD] pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci8: <ACPI PCI bus> on pcib8 re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xae00-0xaeff mem 0xfbeff000-0xfbefffff,0xfbef8000-0xfbefbfff irq 16 at device 0.0 on pci8 re0: Using 1 MSI messages re0: Chip rev. 0x28000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:24:1d:77:8f:1b re0: [FILTER] pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci9: <ACPI PCI bus> on pcib9 re1: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xee00-0xeeff mem 0xfbcff000-0xfbcfffff,0xfbcf8000-0xfbcfbfff irq 17 at device 0.0 on pci9 re1: Using 1 MSI messages re1: Chip rev. 0x28000000 re1: MAC rev. 0x00000000 miibus1: <MII bus> on re1 rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1 rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re1: Ethernet address: 00:24:1d:77:8f:1d re1: [FILTER] uhci3: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 23 at device 29.0 on pci0 uhci3: [ITHREAD] uhci3: LegSup = 0x003b usbus4: <UHCI (generic) USB controller> on uhci3 uhci4: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 19 at device 29.1 on pci0 uhci4: [ITHREAD] uhci4: LegSup = 0x0010 usbus5: <UHCI (generic) USB controller> on uhci4 uhci5: <UHCI (generic) USB controller> port 0xfa00-0xfa1f irq 18 at device 29.2 on pci0 uhci5: [ITHREAD] uhci5: LegSup = 0x0010 usbus6: <UHCI (generic) USB controller> on uhci5 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfbffd000-0xfbffd3ff irq 23 at device 29.7 on pci0 ehci1: [ITHREAD] usbus7: waiting for BIOS to give up control usbus7: EHCI version 1.0 usbus7: <EHCI (generic) USB 2.0 controller> on ehci1 pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci10: <ACPI PCI bus> on pcib10 fwohci0: <Texas Instruments TSB43AB23> mem 0xfbaff000-0xfbaff7ff,0xfbaf8000-0xfbafbfff irq 18 at device 6.0 on pci10 fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:79:f0:ea:00:00:24:1d fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xc328c000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:79:f0:00:24:1d fwe0: Ethernet address: 02:79:f0:00:24:1d fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:79:f0:ea:00:00:24:1d @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci2: <Intel ICH10 SATA300 controller> port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf51f mem 0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0 atapci2: [ITHREAD] atapci2: AHCI called from vendor specific driver atapci2: AHCI v1.20 controller with 6 3Gbps ports, PM supported ata5: <ATA channel 0> on atapci2 ata5: [ITHREAD] ata6: <ATA channel 1> on atapci2 ata6: [ITHREAD] ata7: <ATA channel 2> on atapci2 ata7: [ITHREAD] ata8: <ATA channel 3> on atapci2 ata8: [ITHREAD] ata9: <ATA channel 4> on atapci2 ata9: [ITHREAD] ata10: <ATA channel 5> on atapci2 ata10: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atrtc1: <AT realtime clock> port 0x70-0x73 on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 cpu4: <ACPI CPU> on acpi0 est4: <Enhanced SpeedStep Frequency Control> on cpu4 p4tcc4: <CPU Frequency Thermal Control> on cpu4 cpu5: <ACPI CPU> on acpi0 est5: <Enhanced SpeedStep Frequency Control> on cpu5 p4tcc5: <CPU Frequency Thermal Control> on cpu5 cpu6: <ACPI CPU> on acpi0 est6: <Enhanced SpeedStep Frequency Control> on cpu6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 cpu7: <ACPI CPU> on acpi0 est7: <Enhanced SpeedStep Frequency Control> on cpu7 p4tcc7: <CPU Frequency Thermal Control> on cpu7 orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd2000-0xd3fff,0xd4000-0xd6fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: Warning: Couldn't map Interrupt. ppc0: cannot reserve I/O port range Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 acd0: DVDR <Optiarc DVD RW AD-5240S/1.01> at ata5-master SATA150 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub0: 2 ports with 2 removable, self powered ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub1: 2 ports with 2 removable, self powered ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub2: 2 ports with 2 removable, self powered ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub3: 6 ports with 6 removable, self powered ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 uhub4: 2 ports with 2 removable, self powered ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 uhub5: 2 ports with 2 removable, self powered ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 da0 at twa0 bus 0 target 0 lun 0 da0: <AMCC 9690SA-8I DISK 4.06> Fixed Direct Access SCSI-5 device da0: 100.000MB/s transfers da0: 305154MB (624955392 512 byte sectors: 255H 63S/T 38901C) da1 at twa0 bus 0 target 1 lun 0 da1: <AMCC 9690SA-8I DISK 4.06> Fixed Direct Access SCSI-5 device da1: 100.000MB/s transfers da1: 953664MB (1953103872 512 byte sectors: 255H 63S/T 121575C) SMP: AP CPU #1 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #4 Launched! WARNING: WITNESS option enabled, expect reduced performance. uhub6: 2 ports with 2 removable, self powered ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 Root mount waiting for: usbus7 Root mount waiting for: usbus7 Root mount waiting for: usbus7 uhub7: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/da0s1a --------------------------------------------------------------------------------- pciconf -lv follows hostb0@pci0:0:0:0: class=0x060000 card=0x50001458 chip=0x34058086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = 'QuickPath Architecture I/O Hub to ESI Port' class = bridge subclass = HOST-PCI pcib1@pci0:0:1:0: class=0x060400 card=0x50011458 chip=0x34088086 rev=0x12 hdr=0x01 vendor = 'Intel Corporation' device = 'QuickPath Architecture I/O Hub PCI Express Root Port 1' class = bridge subclass = PCI-PCI pcib2@pci0:0:3:0: class=0x060400 card=0x50011458 chip=0x340a8086 rev=0x12 hdr=0x01 vendor = 'Intel Corporation' device = 'QuickPath Architecture I/O Hub PCI Express Root Port 3' class = bridge subclass = PCI-PCI pcib3@pci0:0:5:0: class=0x060400 card=0x50011458 chip=0x340c8086 rev=0x12 hdr=0x01 vendor = 'Intel Corporation' device = 'QuickPath Architecture I/O Hub PCI Express Root Port 5' class = bridge subclass = PCI-PCI pcib4@pci0:0:7:0: class=0x060400 card=0x50011458 chip=0x340e8086 rev=0x12 hdr=0x01 vendor = 'Intel Corporation' device = 'QuickPath Architecture I/O Hub PCI Express Root Port 7' class = bridge subclass = PCI-PCI pcib5@pci0:0:9:0: class=0x060400 card=0x50011458 chip=0x34108086 rev=0x12 hdr=0x01 vendor = 'Intel Corporation' device = 'QuickPath Architecture I/O Hub PCI Express Root Port 9' class = bridge subclass = PCI-PCI none0@pci0:0:16:0: class=0x080000 card=0x00000000 chip=0x34258086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = 'QuickPath Interconnect Physical and Link Layer Registers - Port 0' class = base peripheral subclass = interrupt controller none1@pci0:0:16:1: class=0x080000 card=0x00000000 chip=0x34268086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = 'QuickPath Interconnect Routing and Protocol Layer Registers - Port 0' class = base peripheral subclass = interrupt controller none2@pci0:0:17:0: class=0x080000 card=0x00000000 chip=0x34278086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = 'QuickPath Interconnect Physical and Link Layer Registers - Port 1' class = base peripheral subclass = interrupt controller none3@pci0:0:17:1: class=0x080000 card=0x00000000 chip=0x34288086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = 'QuickPath Interconnect Routing & Protocol Layer Registers - Port 1' class = base peripheral subclass = interrupt controller ioapic0@pci0:0:19:0: class=0x080020 card=0x00000000 chip=0x342d8086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = 'QuickPath Architecture I/O Hub I/OxAPIC Interrupt Controller' class = base peripheral subclass = interrupt controller none4@pci0:0:20:0: class=0x080000 card=0x00000000 chip=0x342e8086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = 'QuickPath Architecture I/O Hub System Management Registers' class = base peripheral subclass = interrupt controller none5@pci0:0:20:1: class=0x080000 card=0x00000000 chip=0x34228086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = 'QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers' class = base peripheral subclass = interrupt controller none6@pci0:0:20:2: class=0x080000 card=0x00000000 chip=0x34238086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = 'QuickPath Architecture I/O Hub Control Status and RAS Registers' class = base peripheral subclass = interrupt controller ioapic1@pci0:0:21:0: class=0x080020 card=0x00000000 chip=0x342f8086 rev=0x12 hdr=0x00 vendor = 'Intel Corporation' device = 'Trusted Execution Technology Registers' class = base peripheral subclass = interrupt controller uhci0@pci0:0:26:0: class=0x0c0300 card=0x50041458 chip=0x3a378086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *4' class = serial bus subclass = USB uhci1@pci0:0:26:1: class=0x0c0300 card=0x50041458 chip=0x3a388086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *5' class = serial bus subclass = USB uhci2@pci0:0:26:2: class=0x0c0300 card=0x50041458 chip=0x3a398086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *6' class = serial bus subclass = USB ehci0@pci0:0:26:7: class=0x0c0320 card=0x50061458 chip=0x3a3c8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB EHCI Controller *2' class = serial bus subclass = USB none7@pci0:0:27:0: class=0x040300 card=0xa1021458 chip=0x3a3e8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'HD Audio Controller' class = multimedia subclass = HDA pcib6@pci0:0:28:0: class=0x060400 card=0x50011458 chip=0x3a408086 rev=0x00 hdr=0x01 vendor = 'Intel Corporation' device = 'PCI Express Port 1' class = bridge subclass = PCI-PCI pcib7@pci0:0:28:1: class=0x060400 card=0x50011458 chip=0x3a428086 rev=0x00 hdr=0x01 vendor = 'Intel Corporation' device = 'PCI Express Port 2' class = bridge subclass = PCI-PCI pcib8@pci0:0:28:4: class=0x060400 card=0x50011458 chip=0x3a488086 rev=0x00 hdr=0x01 vendor = 'Intel Corporation' device = 'PCI Express Port 5' class = bridge subclass = PCI-PCI pcib9@pci0:0:28:5: class=0x060400 card=0x50011458 chip=0x3a4a8086 rev=0x00 hdr=0x01 vendor = 'Intel Corporation' device = 'PCI Express Port 6' class = bridge subclass = PCI-PCI uhci3@pci0:0:29:0: class=0x0c0300 card=0x50041458 chip=0x3a348086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *1' class = serial bus subclass = USB uhci4@pci0:0:29:1: class=0x0c0300 card=0x50041458 chip=0x3a358086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *2' class = serial bus subclass = USB uhci5@pci0:0:29:2: class=0x0c0300 card=0x50041458 chip=0x3a368086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB UHCI Controller *3' class = serial bus subclass = USB ehci1@pci0:0:29:7: class=0x0c0320 card=0x50061458 chip=0x3a3a8086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'USB EHCI Controller *1' class = serial bus subclass = USB pcib10@pci0:0:30:0: class=0x060401 card=0x50001458 chip=0x244e8086 rev=0x90 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x50011458 chip=0x3a168086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'LPC Interface Controller' class = bridge subclass = PCI-ISA atapci2@pci0:0:31:2: class=0x010601 card=0xb0051458 chip=0x3a228086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '6 port SATA AHCI Controller' class = mass storage subclass = SATA none8@pci0:0:31:3: class=0x0c0500 card=0x50011458 chip=0x3a308086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'SMB controller (50011458)' class = serial bus subclass = SMBus vgapci0@pci0:2:0:0: class=0x030000 card=0x82641043 chip=0x042110de rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp' device = 'GeForce 8500 GT (G86)' class = display subclass = VGA twa0@pci0:4:0:0: class=0x010400 card=0x100513c1 chip=0x100513c1 rev=0x01 hdr=0x00 vendor = '3ware Inc' device = 'PCI-Express SATA2/SAS Raid Controller (9690SA Series)' class = mass storage subclass = RAID atapci0@pci0:7:0:0: class=0x010601 card=0xb0001458 chip=0x2363197b rev=0x02 hdr=0x00 vendor = 'JMicron Technology Corp.' device = 'JMB36X PCIe-to-SATA-300/IDE RAID Controller' class = mass storage subclass = SATA atapci1@pci0:7:0:1: class=0x010185 card=0xb0001458 chip=0x2363197b rev=0x02 hdr=0x00 vendor = 'JMicron Technology Corp.' device = 'JMB36X PCIe-to-SATA-300/IDE RAID Controller' class = mass storage subclass = ATA re0@pci0:8:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x03 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111)' class = network subclass = ethernet re1@pci0:9:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x03 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111)' class = network subclass = ethernet fwohci0@pci0:10:6:0: class=0x0c0010 card=0x10001458 chip=0x8024104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = 'TSB43AB23 1394a-2000 OHCI PHY/link-layer Controller' class = serial bus subclass = FireWire