Bug 150640

Summary: [panic] Fatal Trap 9 - 8.1-release
Product: Base System Reporter: netilesik
Component: kernAssignee: freebsd-bugs (Nobody) <bugs>
Status: Open ---    
Severity: Affects Only Me Keywords: crash
Priority: Normal    
Version: Unspecified   
Hardware: Any   
OS: Any   

Description netilesik 2010-09-17 10:10:04 UTC 
After a day or more of uptime this happens:
(System not very busy. general LA is 0.5-0.8,  14 jails) 


Fatal trap 9 general protection fault while in kernel mode
cpuid = 1; acpi id = 01
instruction pointer = 0x20:0xffffffff8062fbd7
stack pointer = 0x28:0xffffff8078139550
frame pointer = 0x28:0xffffff80781395c0
code segment = base rx0. limit 0xfffff. type Qx1b
 DPL Q. pres 1. long 1. def3Z 0. gran 1

processor eflags = interrupt enabled. resume. IOPL = 0
current process = 98732 (postmap)
trap number = 9
panic: general protection fault
cpuid = 1
Uptime: 1d19h41m34s
Cannot dump. Device not defined or unavailable.
Automatic reboot in 15 seconds - press a key on the console to abort


..
and it didnt reboots after 15 sec. only hard reset helps.
If any more info requred to help solve this problem - just ask, and I will provide.


DMESG:(just after reboot)

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #3: Sat Jul 31 01:53:25 EEST 2010
    root@inkiev.net:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz (2997.01-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Family = 6  Model = 17  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 4105187328 (3915 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A_M_I_ OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, df600000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 0xEA, should be 0xDD (20100331/tbutils-354)
cpu1: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xec00-0xec07 mem 0xfea00000-0xfea7ffff,0xe0000000-0xefffffff,0xfe900000-0xfe9fffff irq 16 at device 2.0 on pci0
agp0: <Intel G33 SVGA controller> on vgapci0
agp0: detected 7164k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xfea80000-0xfeafffff at device 2.1 on pci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci1: <ACPI PCI bus> on pcib2
age0: <Attansic Technology Corp, L1 Gigabit Ethernet> mem 0xfebc0000-0xfebfffff irq 17 at device 0.0 on pci1
age0: 1280 Tx FIFO, 2364 Rx FIFO
age0: Using 1 MSI messages.
age0: 4GB boundary crossed, switching to 32bit DMA addressing mode.
miibus0: <MII bus> on age0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
age0: Ethernet address: 00:1f:c6:a8:97:43
age0: [FILTER]
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xe400-0xe41f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xe480-0xe49f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xe800-0xe81f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xe880-0xe89f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe8f7c00-0xfe8f7fff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port 0xe080-0xe087,0xe000-0xe003,0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd80f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad4: 953869MB <Hitachi HDT721010SLA360 ST6OA3AA> at ata2-master UDMA100 SATA
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ad5: 953869MB <SAMSUNG HD103UJ 1AA01118> at ata2-slave UDMA100 SATA
ad6: 953869MB <Hitachi HDT721010SLA360 ST6OA3AA> at ata3-master UDMA100 SATA
ad7: 953869MB <SAMSUNG HD103UJ 1AA01118> at ata3-slave UDMA100 SATA
SMP: AP CPU #1 Launched!
GEOM_MIRROR: Device mirror/gm-root launched (1/2).
GEOM_MIRROR: Device gm-root: rebuilding provider ad4s1.
GEOM_MIRROR: Device mirror/gm1 launched (1/2).
GEOM_MIRROR: Device gm1: rebuilding provider ad5.
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/mirror/gm-roota
WARNING: / was not properly dismounted
ugen1.2: <APC> at usbus1
ums0: <APC Mouse> on usbus1
ums0: 5 buttons and [XYZ] coordinates ID=0
ukbd0: <APC Keyboard> on usbus1
kbd2 at ukbd0
WARNING: / was not properly dismounted
WARNING: /raid was not properly dismounted
/raid: mount pending error: blocks 124 files 30
tun0: link state changed to UP
Comment 1 Jaakko Heinonen freebsd_committer freebsd_triage 2012-11-22 16:00:42 UTC 
State Changed
From-To: open->feedback

Is this still a problem on recent FreeBSD versions?
Comment 2 Eitan Adler freebsd_committer freebsd_triage 2017-12-31 08:01:08 UTC 
For bugs matching the following criteria:

Status: In Progress Changed: (is less than) 2014-06-01

Reset to default assignee and clear in-progress tags.

Mail being skipped
Comment 3 Graham Perrin freebsd_committer freebsd_triage 2022-10-17 12:17:02 UTC 
Keyword: 

    crash

– in lieu of summary line prefix: 

    [panic]

* bulk change for the keyword
* summary lines may be edited manually (not in bulk). 

Keyword descriptions and search interface: 

    <https://bugs.freebsd.org/bugzilla/describekeywords.cgi>