Bug 162043
| Summary: | dev.cpu.0.freq is missing [regression] | ||
|---|---|---|---|
| Product: | Base System | Reporter: | freebsd |
| Component: | amd64 | Assignee: | freebsd-amd64 (Nobody) <amd64> |
| Status: | Closed Unable to Reproduce | ||
| Severity: | Affects Only Me | CC: | felix.the.red |
| Priority: | Normal | ||
| Version: | Unspecified | ||
| Hardware: | Any | ||
| OS: | Any | ||
State Changed From-To: open->feedback To submitter: COuld you also please provide the dmesg and "sysctl dev.cpu.0" output from 8.2? Responsible Changed From-To: freebsd-amd64->gavin Track I've found the dmesg output in a daily mail.
I've diffed old and new version and all I see is this:
+xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe9f8000-0xfe9fffff irq 18 at
device 0.0 on pci1
+xhci0: 32 byte context size.
+usbus0 on xhci0
ahci_load was YES all the time, but:
-acd0: DVDROM <LG DVD-ROM DRD-8160B/1.01> at ata0-master UDMA33
+cd0 at ata0 bus 0 scbus4 target 0 lun 0
+cd0: <LG DVD-ROM DRD8160B 1.01> Removable CD-ROM SCSI-0 device
+cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
+cd0: Attempt to query device size failed: NOT READY, Medium not present
-ad5: 476940MB <Seagate ST3500630NS 3.AEG> at ata2-slave UDMA100 SATA
+ada5 at ata2 bus 0 scbus5 target 1 lun 0
+ada5: <ST3500630NS 3.AEG> ATA-7 SATA 2.x device
+ada5: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
+ada5: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
+ada5: Previously was known as ad13
I've added coretemp_load=YES in the meantime:
+coretemp0: <CPU On-Die Thermal Sensors> on cpu0
+est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160f2506000925
device_attach: est0 attach returned 6
+p4tcc0: <CPU Frequency Thermal Control> on cpu0
+coretemp1: <CPU On-Die Thermal Sensors> on cpu1
+est1: <Enhanced SpeedStep Frequency Control> on cpu1
+est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160f2506000925
+device_attach: est1 attach returned 6
+p4tcc1: <CPU Frequency Thermal Control> on cpu1
dev.cpu.0.freq was present. I have a munin graph showing me a working
powerd (min 373.90, avg 2253.07, max 2999.00)
If you want, I can try to boot 8.2 from DVD and check sysctl
dev.cpu.0.
Here's the full dmesg output:
bkool kernel log messages:
++ /tmp/security.mxrmGUny 2011-10-26 03:12:21.716285324 +0200
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-STABLE #2: Thu Mar 3 16:59:15 CET 2011
knarf@bkool:/usr/obj/usr/src/sys/BKOOL amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz (2999.92-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Family = 6 Model = 17 Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x400e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4070481920 (3881 MB)
ACPI APIC Table: <060811 APIC2213>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ichwd module loaded
acpi0: <060811 RSDT2213> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, ddd00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci5: <ACPI PCI bus> on pcib1
mvs0: <Marvell 88SX7042 SATA controller> port 0xe800-0xe8ff mem 0xfeb00000-0xfebfffff irq 16 at device 0.0 on pci5
mvs0: Gen-IIe, 4 3Gbps ports, Port Multiplier supported with FBS
mvs0: [ITHREAD]
mvsch0: <Marvell SATA channel> at channel 0 on mvs0
mvsch0: [ITHREAD]
mvsch1: <Marvell SATA channel> at channel 1 on mvs0
mvsch1: [ITHREAD]
mvsch2: <Marvell SATA channel> at channel 2 on mvs0
mvsch2: [ITHREAD]
mvsch3: <Marvell SATA channel> at channel 3 on mvs0
mvsch3: [ITHREAD]
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel G41 SVGA controller> on vgapci0
agp0: detected 32764k stolen memory
agp0: aperture size is 256M
hdac0: <Intel 82801G High Definition Audio Controller> mem 0xfe8f8000-0xfe8fbfff irq 16 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfdeff000-0xfdefffff,0xfdef8000-0xfdefbfff irq 17 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 00:25:22:f5:0e:53
re0: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci1: <ACPI PCI bus> on pcib4
pci1: <serial bus, USB> at device 0.0 (no driver attached)
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xc400-0xc41f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc480-0xc49f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc880-0xc89f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe8f7c00-0xfe8f7fff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x400-0x41f irq 19 at device 31.3 on pci0
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
ichwd0: <Intel ICH7 watchdog timer> on isa0
ichwd0: Intel ICH7 watchdog timer (ICH7 or equivalent)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
uart1: [FILTER]
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6160f2506000925
device_attach: est0 attach returned 6
est: cpu_vendor GenuineIntel, msr 6160f2506000925
ada0 at mvsch0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG HD103UJ 1AA01118> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
acd0: DVDROM <LG DVD-ROM DRD-8160B/1.01> at ata0-master UDMA33
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada1 at mvsch1 bus 0 scbus1 target 0 lun 0
ada1: <SAMSUNG HD103UJ 1AA01113> ATA-7 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada2 at mvsch2 bus 0 scbus2 target 0 lun 0
ada2: <WDC WD5000ABYS-01TNA0 12.01C01> ATA-7 SATA 2.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ad4: 476940MB <Seagate ST3500320AS SD1A> at ata2-master UDMA100 SATA
ada3 at mvsch3 bus 0 scbus3 target 0 lun 0
ada3: <ST3500320AS SD1A> ATA-8 SATA 2.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ad5: 476940MB <Seagate ST3500630NS 3.AEG> at ata2-slave UDMA100 SATA
ad6: 476940MB <Seagate ST3500320AS SD1A> at ata3-master UDMA100 SATA
ad7: 476940MB <Seagate ST3500320AS SD1A> at ata3-slave UDMA100 SATA
hdac0: HDA Codec #0: VIA VT1708S_4
hdac0: HDA Codec #2: Intel G45 HDMI
hdac0: No jack detection support at pin 29
pcm0: <HDA VIA VT1708S_4 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Intel G45 HDMI PCM #0 HDMI> at cad 2 nid 1 on hdac0
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
ugen0.2: <Cherry GmbH> at usbus0
ukbd0: <Cherry GmbH product 0x0001, class 0/0, rev 2.00/0.26, addr 2> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus4
Trying to mount root from zfs:zroot
ROOT MOUNT ERROR:
If you have invalid mount options, reboot, and first try the following from
the loader prompt:
set vfs.root.mountfrom.options=rw
and then remove invalid mount options from /etc/fstab.
Loader variables:
vfs.root.mountfrom=zfs:zroot
vfs.root.mountfrom.options=
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:/dev/da0s1a
eg. cd9660:/dev/acd0
This is equivalent to: mount -t cd9660 /dev/acd0 /
? List valid disk boot devices
<empty line> Abort manual input
mountroot> zfsw\^H \^H:zroot
GEOM_ELI: Device gpt/bkoolad6.eli created.
GEOM_ELI: Device gpt/bkoolad5.eli created.
GEOM_ELI: Device gpt/bkoolad7.eli created.
GEOM_ELI: Device gpt/bkoolad4.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
GEOM_ELI: Device gpt/bkoolad4.eli destroyed.
GEOM_ELI: Device gpt/bkoolad4.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
Oh, BTW, the bug is gone, I no longer have to type "zfs:zroot" here,
even when it says "Trying to mount root from zfs:zroot" and
vfs.root.mountfrom=zfs:zroot.
I have no longer access to the system, so I can no longer help to debug the problem. I remember there was a BIOS option which was called "Intel SpeedStep" or something like that. It was grey (not changeable) and "Disabled". Maybe FreeBSD 8 ignored this setting and FreeBSD 9 did not. I have same problem on my test machine. But it has P4 1.8Ghz CPU. # service powerd start sysctl: dev.cpu.0.freq: Device not configured Starting powerd. # sysctl -a | grep dev.cpu.0 dev.cpu.0.%desc: ACPI CPU dev.cpu.0.%driver: cpu dev.cpu.0.%location: handle=\_PR_.CPU1 dev.cpu.0.%pnpinfo: _HID=none _UID=0 dev.cpu.0.%parent: acpi0 dev.cpu.0.freq_levels: 2660/-1 2327/-1 1995/-1 1662/-1 1330/-1 997/-1 665/-1 332/-1 dev.cpu.0.cx_supported: C1/0 dev.cpu.0.cx_lowest: C1 dev.cpu.0.cx_usage: 100.00% last 7530us It was fine on 8.2 I can install 8.2 and some help. For bugs matching the following criteria: Status: In Progress Changed: (is less than) 2014-06-01 Reset to default assignee and clear in-progress tags. Mail being skipped I think the key information is the error returned during device_attach. A return value of 6 is ENXIO (device not configured). est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160f2506000925 device_attach: est0 attach returned 6 The reporter also noted SpeedStep was disabled by the BIOS. |
I've upgraded from 8.2-RELEASE to 9.0-RC1 last night and now powerd stopped working. There is no longer a dev.cpu.0.freq sysctl variable present. bkool:/root# sysctl dev.cpu.0 dev.cpu.0.%desc: ACPI CPU dev.cpu.0.%driver: cpu dev.cpu.0.%location: handle=\_PR_.P001 dev.cpu.0.%pnpinfo: _HID=none _UID=0 dev.cpu.0.%parent: acpi0 dev.cpu.0.freq_levels: 2999/-1 2624/-1 2249/-1 1874/-1 1499/-1 1124/-1 749/-1 374/-1 dev.cpu.0.cx_supported: C1/0 dev.cpu.0.cx_lowest: C1 dev.cpu.0.cx_usage: 100.00% last 507us dev.cpu.0.coretemp.delta: 61 dev.cpu.0.coretemp.resolution: 1 dev.cpu.0.coretemp.tjmax: 100.0C dev.cpu.0.coretemp.throttle_log: 0 dev.cpu.0.temperature: 39.0C (powerd_flags="-vv") bkool:/root# /etc/rc.d/powerd restart powerd not running? Starting powerd. powerd: unable to determine AC line status powerd: error reading current CPU frequency: Device not configured powerd: error reading current CPU frequency: Device not configured CPU frequency is below user-defined minimum; changing frequency to 374 MHz powerd: error setting CPU freq 374: Device not configured powerd: error reading current CPU frequency: Device not configured powerd: error reading current CPU frequency: Device not configured ^C bkool:/root# less /sys/amd64/conf/BKOOL # ident BKOOL include GENERIC bkool:/root# pciconf -vl hostb0@pci0:0:0:0: class=0x060000 card=0x2e301849 chip=0x2e308086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '4 Series Chipset DRAM Controller' class = bridge subclass = HOST-PCI pcib1@pci0:0:1:0: class=0x060400 card=0x2e311849 chip=0x2e318086 rev=0x03 hdr=0x01 vendor = 'Intel Corporation' device = '4 Series Chipset PCI Express Root Port' class = bridge subclass = PCI-PCI vgapci0@pci0:0:2:0: class=0x030000 card=0x2e321849 chip=0x2e328086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '4 Series Chipset Integrated Graphics Controller' class = display subclass = VGA hdac0@pci0:0:27:0: class=0x040300 card=0x03971849 chip=0x27d88086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = 'N10/ICH 7 Family High Definition Audio Controller' class = multimedia subclass = HDA pcib2@pci0:0:28:0: class=0x060400 card=0x27d01849 chip=0x27d08086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' device = 'N10/ICH 7 Family PCI Express Port 1' class = bridge subclass = PCI-PCI pcib3@pci0:0:28:1: class=0x060400 card=0x27d21849 chip=0x27d28086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' device = 'N10/ICH 7 Family PCI Express Port 2' class = bridge subclass = PCI-PCI pcib4@pci0:0:28:2: class=0x060400 card=0x27d41849 chip=0x27d48086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' device = 'N10/ICH 7 Family PCI Express Port 3' class = bridge subclass = PCI-PCI uhci0@pci0:0:29:0: class=0x0c0300 card=0x27c81849 chip=0x27c88086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = 'N10/ICH 7 Family USB UHCI Controller' class = serial bus subclass = USB uhci1@pci0:0:29:1: class=0x0c0300 card=0x27c91849 chip=0x27c98086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = 'N10/ICH 7 Family USB UHCI Controller' class = serial bus subclass = USB uhci2@pci0:0:29:2: class=0x0c0300 card=0x27ca1849 chip=0x27ca8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = 'N10/ICH 7 Family USB UHCI Controller' class = serial bus subclass = USB uhci3@pci0:0:29:3: class=0x0c0300 card=0x27cb1849 chip=0x27cb8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = 'N10/ICH 7 Family USB UHCI Controller' class = serial bus subclass = USB ehci0@pci0:0:29:7: class=0x0c0320 card=0x27cc1849 chip=0x27cc8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = 'N10/ICH 7 Family USB2 EHCI Controller' class = serial bus subclass = USB pcib5@pci0:0:30:0: class=0x060401 card=0x244e1849 chip=0x244e8086 rev=0xe1 hdr=0x01 vendor = 'Intel Corporation' device = '82801 PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x27b81849 chip=0x27b88086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801GB/GR (ICH7 Family) LPC Interface Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:0:31:1: class=0x01018a card=0x27df1849 chip=0x27df8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) IDE Controller' class = mass storage subclass = ATA atapci1@pci0:0:31:2: class=0x01018f card=0x27c01849 chip=0x27c08086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = 'N10/ICH7 Family SATA IDE Controller' class = mass storage subclass = ATA ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x27da1849 chip=0x27da8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = 'N10/ICH 7 Family SMBus Controller' class = serial bus subclass = SMBus mvs0@pci0:5:0:0: class=0x010000 card=0x11ab11ab chip=0x704211ab rev=0x02 hdr=0x00 vendor = 'Marvell Technology Group Ltd.' device = '88SX7042 PCI-e 4-port SATA-II' class = mass storage subclass = SCSI re0@pci0:2:0:0: class=0x020000 card=0x81681849 chip=0x816810ec rev=0x06 hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' class = network subclass = ethernet xhci0@pci0:1:0:0: class=0x0c0330 card=0x10421849 chip=0x10421b21 rev=0x00 hdr=0x00 vendor = 'ASMedia Technology Inc.' device = 'ASM1042 SuperSpeed USB Host Controller' class = serial bus subclass = USB bkool:/root# kldstat Id Refs Address Size Name 1 40 0xffffffff80200000 11d4108 kernel 2 1 0xffffffff813d5000 203ec8 zfs.ko 3 2 0xffffffff815d9000 5c60 opensolaris.ko 4 1 0xffffffff815e0000 55b0 ichsmb.ko 5 2 0xffffffff815e6000 2628 smbus.ko 6 1 0xffffffff815e9000 4a80 ichwd.ko 7 1 0xffffffff81812000 ce99 geom_eli.ko 8 1 0xffffffff8181f000 1b160 crypto.ko 9 1 0xffffffff8183b000 a4dc zlib.ko 10 1 0xffffffff81846000 c00a ipfw.ko 11 1 0xffffffff81853000 1e1b7 linux.ko 12 1 0xffffffff81872000 16286 nfsserver.ko 13 1 0xffffffff81889000 976 nfs_common.ko 14 1 0xffffffff8188a000 220 green_saver.ko 15 1 0xffffffff8188b000 c78 coretemp.ko bkool:/root# kldstat -vv | grep cpuf 370 cpu/cpufreq bkool:/root# dmesg Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-RC1 #3: Wed Oct 26 05:39:19 CEST 2011 knarf@bkool:/usr/obj/usr/src/sys/BKOOL amd64 CPU: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz (2999.97-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Family = 6 Model = 17 Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x400e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4065173504 (3876 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <060811 APIC2213> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <060811 RSDT2213> on motherboard acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, ddd00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci5: <ACPI PCI bus> on pcib1 mvs0: <Marvell 88SX7042 SATA controller> port 0xe800-0xe8ff mem 0xfeb00000-0xfebfffff irq 16 at device 0.0 on pci5 mvs0: Gen-IIe, 4 3Gbps ports, Port Multiplier supported with FBS mvsch0: <Marvell SATA channel> at channel 0 on mvs0 mvsch1: <Marvell SATA channel> at channel 1 on mvs0 mvsch2: <Marvell SATA channel> at channel 2 on mvs0 mvsch3: <Marvell SATA channel> at channel 3 on mvs0 vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfe400000-0xfe7fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 agp0: <Intel G41 SVGA controller> on vgapci0 agp0: aperture size is 256M, detected 32764k stolen memory hdac0: <Intel 82801G High Definition Audio Controller> mem 0xfe8f8000-0xfe8fbfff irq 16 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfdeff000-0xfdefffff,0xfdef8000-0xfdefbfff irq 17 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 00:25:22:f5:0e:53 pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci1: <ACPI PCI bus> on pcib4 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe9f8000-0xfe9fffff irq 18 at device 0.0 on pci1 xhci0: 32 byte context size. usbus0 on xhci0 uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xc400-0xc41f irq 23 at device 29.0 on pci0 uhci0: LegSup = 0x2f00 usbus1: <Intel 82801G (ICH7) USB controller USB-A> on uhci0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc480-0xc49f irq 19 at device 29.1 on pci0 uhci1: LegSup = 0x2f00 usbus2: <Intel 82801G (ICH7) USB controller USB-B> on uhci1 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc800-0xc81f irq 18 at device 29.2 on pci0 uhci2: LegSup = 0x2f00 usbus3: <Intel 82801G (ICH7) USB controller USB-C> on uhci2 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc880-0xc89f irq 16 at device 29.3 on pci0 uhci3: LegSup = 0x2f00 usbus4: <Intel 82801G (ICH7) USB controller USB-D> on uhci3 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe8f7c00-0xfe8f7fff irq 23 at device 29.7 on pci0 usbus5: EHCI version 1.0 usbus5: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 atapci1: <Intel ICH7 SATA300 controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f irq 19 at device 31.2 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x400-0x41f irq 19 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_button0: <Power Button> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ichwd0: <Intel ICH7 watchdog timer> on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160f2506000925 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160f2506000925 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. ZFS filesystem version 5 ZFS storage pool version 28 Timecounters tick every 1.000 msec hdac0: HDA Codec #0: VIA VT1708S_4 hdac0: HDA Codec #2: Intel Eaglelake HDMI hdac0: No jack detection support at pin 29 pcm0: <HDA VIA VT1708S_4 PCM #0 Analog> at cad 0 nid 1 on hdac0 pcm1: <HDA Intel Eaglelake HDMI PCM #0 HDMI> at cad 2 nid 1 on hdac0 usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ugen0.1: <0x1b21> at usbus0 uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ada0 at mvsch0 bus 0 scbus0 target 0 lun 0 ada0: <SAMSUNG HD103UJ 1AA01118> ATA-7 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ada1 at mvsch1 bus 0 scbus1 target 0 lun 0 ada1: <SAMSUNG HD103UJ 1AA01113> ATA-7 SATA 2.x device ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad6 ada2 at mvsch2 bus 0 scbus2 target 0 lun 0 ada2: <WDC WD5000ABYS-01TNA0 12.01C01> ATA-7 SATA 2.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad8 ada3 at mvsch3 bus 0 scbus3 target 0 lun 0 ada3: <ST3500320AS SD1A> ATA-8 SATA 2.x device ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada3: Previously was known as ad10 ada4 at ata2 bus 0 scbus5 target 0 lun 0 ada4: <ST3500320AS SD1A> ATA-8 SATA 2.x device ada4: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada4: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada4: Previously was known as ad12 ada5 at ata2 bus 0 scbus5 target 1 lun 0 ada5: <ST3500630NS 3.AEG> ATA-7 SATA 2.x device ada5: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada5: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada5: Previously was known as ad13 ada6 at ata3 bus 0 scbus6 target 0 lun 0 ada6: <ST3500320AS SD1A> ATA-8 SATA 2.x device ada6: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada6: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada6: Previously was known as ad14 ada7 at ata3 bus 0 scbus6 target 1 lun 0 ada7: <ST3500320AS SD1A> ATA-8 SATA 2.x device ada7: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada7: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) ada7: Previously was known as ad15 cd0 at ata0 bus 0 scbus4 target 0 lun 0 cd0: <LG DVD-ROM DRD8160B 1.01> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present SMP: AP CPU #1 Launched! Timecounter "TSC-low" frequency 11718627 Hz quality 1000 uhub0: 4 ports with 4 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered Root mount waiting for: usbus5 Root mount waiting for: usbus5 uhub5: 8 ports with 8 removable, self powered Root mount waiting for: usbus5 Root mount waiting for: usbus5 ugen1.2: <Cherry GmbH> at usbus1 ukbd0: <Cherry GmbH product 0x0001, class 0/0, rev 2.00/0.26, addr 2> on usbus1 kbd2 at ukbd0 Root mount waiting for: usbus5 ugen5.2: <TOSHIBA> at usbus5 umass0: <TOSHIBA TransMemory, class 0/0, rev 2.00/1.00, addr 2> on usbus5 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:7:0:-1: Attached to scbus7 Trying to mount root from zfs:zroot []... da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 da0: <TOSHIBA TransMemory PMAP> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 15260MB (31252480 512 byte sectors: 255H 63S/T 1945C) cryptosoft0: <software crypto> on motherboard GEOM_ELI: Device gpt/bkoolad4.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device gpt/bkoolad6.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device gpt/bkoolad5.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device gpt/bkoolad7.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device gpt/bkooltwed0.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device gpt/bkooltwed1.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device gpt/bkooltwed2.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device gpt/bkooltwed3.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled pid 55943 (try), uid 0: exited on signal 10 (core dumped) coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160f2506000925 device_attach: est0 attach returned 6 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160f2506000925 device_attach: est1 attach returned 6