Bug 188270
| Summary: | [mpt] mpt unable to communicate with LSI7202XP Fibrechannel | ||
|---|---|---|---|
| Product: | Base System | Reporter: | Ian Allison <IFAllison> |
| Component: | kern | Assignee: | freebsd-bugs (Nobody) <bugs> |
| Status: | Open --- | ||
| Severity: | Affects Only Me | ||
| Priority: | Normal | ||
| Version: | Unspecified | ||
| Hardware: | Any | ||
| OS: | Any | ||
Responsible Changed From-To: freebsd-bugs->freebsd-scsi Over to maintainer(s). For bugs matching the following criteria: Status: In Progress Changed: (is less than) 2014-06-01 Reset to default assignee and clear in-progress tags. Mail being skipped |
I'm trying to connect to an external storage shelf over fibre channel. My system is a xserve g5 and the shelf is an xserve raid. The HBA in the xserve is a PCI-X card from LSILogic, it is listed as LSI7202XP PCI-X HBA. From mpt(4) I thought this would work, but mptutil returns garbage whenever I try to configure the shelf. Here are the relevant lines from dmesg mpt0: <Dual LSILogic FC929X 2Gb/s FC PCI-X Adapter> port 0x400-0x4ff mem 0x90030000-0x9003ffff,0x90020000-0x9002ffff irq 181 at device 3.0 on pci2 mpt0: MPI Version=1.3.2.0 mpt1: <Dual LSILogic FC929X 2Gb/s FC PCI-X Adapter> mem 0x90010000-0x9001ffff,0x90000000-0x9000ffff irq 181 at device 3.1 on pci2 mpt1: MPI Version=1.3.2.0 And here is the output of pciconf -lv mpt0@pci1:6:3:0: class=0x0c0400 card=0x10d01000 chip=0x06261000 rev=0x81 hdr=0x00 vendor = 'LSI Logic / Symbios Logic' device = 'FC929X Fibre Channel Adapter' class = serial bus subclass = Fibre Channel mpt1@pci1:6:3:1: class=0x0c0400 card=0x10d01000 chip=0x06261000 rev=0x81 hdr=0x00 vendor = 'LSI Logic / Symbios Logic' device = 'FC929X Fibre Channel Adapter' class = serial bus subclass = Fibre Channel mptutil gives garbled results, for example the show adapter command mptutil show adapter mpt0 Adapter: Board Name: Board Assembly: Chip Name: U? Chip Revision: mptutil: mpt_read_ioc_page(2): Status: 0x2200 mptutil: mpt_read_ioc_page(6): Status: 0x2200 mpt0 Adapter: Board Name: Board Assembly: ?\H Chip Name: ?a Chip Revision: ?#0 mptutil: mpt_read_ioc_page(2): Status: 0x2200 mptutil: mpt_read_ioc_page(6): Status: 0x2200 or show drives mptutil show drives mptutil: Reading config page header failed: Status: 0x2200 mptutil: Failed to fetch volume list: Input/output error mptutil: Failed to get drive list: Input/output error I have looked at /usr/src/UPDATING but couldn't see anything, and all of my searches turned up nothing relevant. How-To-Repeat: From 10.0 with GENERIC kernel mptutil show adapter