Bug 20513
| Summary: | Installation (over internet) does not work with DHCP; stops at "Scanning for DHCP servers" | ||
|---|---|---|---|
| Product: | Base System | Reporter: | kmuthu <kmuthu> |
| Component: | i386 | Assignee: | David E. O'Brien <obrien> |
| Status: | Closed FIXED | ||
| Severity: | Affects Only Me | ||
| Priority: | Normal | ||
| Version: | Unspecified | ||
| Hardware: | Any | ||
| OS: | Any | ||
|
Description
kmuthu
2000-08-10 01:40:00 UTC
State Changed From-To: open->feedback I'm pretty sure that you need to give us more info here. Could you send dmesg(8) output for the affected system so that the maintainer can see what network card you were using and can confirm that the network card was actually probed properly? Responsible Changed From-To: freebsd-bugs->obrien Over to the maintainer. Hi,
The network was indeed probed without any problems. I found
something strange yesterday. After I changed /etc/rc.conf to use DHCP &
rebooted it the first time, the system came up fine. When I rebooted it
yesterday evening (after I filed the PR), the system did not come up
(after displaying something related to 'hostname' while booting). I left
it and today morning, I found that the system is up.
Regards,
Muthu
dmesg output:
------------
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-RELEASE #0: Thu Jul 27 04:44:16 GMT 2000
root@usw4.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (398.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
config> di sn0
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> q
avail memory = 126398464 (123436K bytes)
Preloaded elf kernel "kernel" at 0xc040d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc040d09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 9
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x2000-0x207f mem 0x41100000-0x4110007f irq 11 at device 13.0 on pci0
xl0: Ethernet address: 00:50:04:87:44:3f
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82371AB PCI to ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x20a0-0x20af at device 20.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 20.2 on pci0
uhci0: Invalid irq 255
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
chip1: <Intel 82371AB Power management controller> port 0xfc00-0xfc0f at device 20.3 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ad0: 6149MB <FUJITSU MPD3064AT> [13328/15/63] at ata0-master using UDMA33
acd0: CDROM <LTN323> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
>
> Synopsis: Installation (over internet) does not work with DHCP; stops at "Scanning for DHCP servers"
>
> State-Changed-From-To: open->feedback
> State-Changed-By: sheldonh
> State-Changed-When: Thu Aug 10 03:18:37 PDT 2000
> State-Changed-Why:
> I'm pretty sure that you need to give us more info here.
> Could you send dmesg(8) output for the affected system so that
> the maintainer can see what network card you were using and
> can confirm that the network card was actually probed properly?
>
>
> Responsible-Changed-From-To: freebsd-bugs->obrien
> Responsible-Changed-By: sheldonh
> Responsible-Changed-When: Thu Aug 10 03:18:37 PDT 2000
> Responsible-Changed-Why:
> Over to the maintainer.
>
> http://www.freebsd.org/cgi/query-pr.cgi?pr=20513
>
State Changed
From-To: feedback->closed
It sounds like a sysinstall problem, not dhclient one. Since 4.1 isn't the
current release, I'm closing this unless someone sees the same problem
with 4.2 {beta,RC,release}.
|
