Summary: | RTL8188CUS usb wifi adapter not working with CURRENT on i386 (not tested on other arch) | ||
---|---|---|---|
Product: | Base System | Reporter: | lenzi.sergio |
Component: | usb | Assignee: | freebsd-usb (Nobody) <usb> |
Status: | Closed FIXED | ||
Severity: | Affects Only Me | CC: | avos, hselasky, lenzi.sergio, wireless |
Priority: | --- | ||
Version: | CURRENT | ||
Hardware: | i386 | ||
OS: | Any |
Description
lenzi.sergio
2017-02-03 05:28:48 UTC
ifconfig wlan0 create wlandev rtwn0 ? for access point (will be created as 'wlan3'):
- manually (with SSID 'test_hostap'):
ifconfig wlan3 create wlandev rtwn0 wlanmode hostap ssid AP
hostapd /etc/hostapd-wlan3.conf
- automatically (in /etc/rc.conf):
wlans_rtwn0="wlan3"
create_args_wlan3="wlanmode hostap"
ifconfig_wlan3="HOSTAP ssid AP"
sample config for hostapd(8) (should be in /etc/hostapd-wlan3.conf):
> interface=wlan3
> debug=1
> ctrl_interface_group=wheel
> ssid=AP
> wpa=2
> wpa_passphrase=passphrase
> wpa_key_mgmt=WPA-PSK
> wpa_pairwise=CCMP
(In reply to Andriy Voskoboinyk from comment #2) s/test_hostap/AP/ (In reply to Andriy Voskoboinyk from comment #1) OK it works... I was confused because the prior version (freeBSD11) on insert of the device ifconfig shows de device urtwn0 Now the device does not show not even /dev/rtwn0... only a message in the console... Ok sorry for the noise... Thank you all Case CLOSED |