Bug 22128
| Summary: | Cannot install 4.1.1 on an Alpha AS200 | ||
|---|---|---|---|
| Product: | Base System | Reporter: | jachs <jachs> |
| Component: | alpha | Assignee: | freebsd-alpha (Nobody) <alpha> |
| Status: | Closed FIXED | ||
| Severity: | Affects Only Me | ||
| Priority: | Normal | ||
| Version: | Unspecified | ||
| Hardware: | Any | ||
| OS: | Any | ||
State Changed From-To: open->closed Could not get feedback from submitter. Evidence is pretty strong this was a 4.1.1.-only problem as people report success with 4.2R on the same hardware. 4.2R installs without ny problem, as well as 4.0. |
The 4.1.1 sysinst program gets stalled in the initial (half completed) screen. Afer some minutes sysinst seems to perate but it cannot find any disk to label. 4.1 behaves the same. 3.4-Release seems to install ok. NetBSD 1.4.2 is installed and working and OpenBSD 2.5 used to work. Dmesg from NetBSD: NetBSD 1.4.2 (GENERIC) #1: Sat Mar 4 03:08:26 PST 2000 toddpw@chewie.toddpw.net:/usr/src/sys/arch/alpha/compile/GENERIC AlphaStation 200 4/233, 233MHz 8192 byte page size, 1 processor. real mem = 100663296 (2048000 reserved for PROM, 98615296 used by NetBSD) avail mem = 82706432 using 1203 buffers containing 9854976 bytes of memory mainbus0 (root) cpu0 at mainbus0: ID 0 (primary), 21064A-0 () apecs0 at mainbus0: DECchip 21071 Core Logic chipset apecs0: DC21071-CA pass 2, 64-bit memory bus apecs0: DC21071-DA pass 2 pci0 at apecs0 bus 0 pci0: i/o enabled, memory enabled ncr0 at pci0 dev 6 function 0: ncr 53c810 fast10 scsi ncr0: interrupting at isa irq 11 ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo ncr0: single-ended, open drain IRQ driver ncr0: restart (scsi reset). scsibus0 at ncr0: 8 targets, 8 luns per target sd0 at scsibus0 targ 1 lun 0: <QUANTUM, FIREBALL ST4.3S, 0F04> SCSI2 0/direct fixed sd0(ncr0:1:0): 10.0 MB/s (100 ns, offset 8) sd0: 4159MB, 7068 cyl, 6 head, 200 sec, 512 bytes/sect x 8519216 sectors sd1 at scsibus0 targ 4 lun 0: <SEAGATE, ST32550N, 0014> SCSI2 0/direct fixedsd1(ncr0:4:0): 10.0 MB/s (100 ns, offset 8) sd1: 2047MB, 3511 cyl, 11 head, 108 sec, 512 bytes/sect x 4194058 sectors sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x43) de0 at pci0 dev 11 function 0 de0: interrupting at isa irq 5 de0: DEC 21040 [10Mb/s] pass 2.4 de0: address 00:00:f8:23:5c:9a vga0 at pci0 dev 12 function 0: Weitek P9000 (rev. 0x03) wsdisplay0 at vga0 isa0 at sio0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo lpt0 at isa0 port 0x3bc-0x3bf irq 7 pckbc0 at isa0 port 0x60-0x64 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 isabeep0 at pcppi0 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible root on sd1a dumps on sd1b root file system type: ffs de0: enabling 10baseT port wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) How-To-Repeat: Try to make an installation in an AS200.