Bug 22969

Summary: 4.1.1 stable kernel cannot find console
Product: Base System Reporter: satz
Component: i386Assignee: freebsd-bugs (Nobody) <bugs>
Status: Closed FIXED    
Severity: Affects Only Me    
Priority: Normal    
Version: Unspecified   
Hardware: Any   
OS: Any   

Description satz 2000-11-20 06:50:01 UTC 
Making a kernel from the 4.1.1 stable tree results in a non-functioning keyboard. The monitor screen works properly. If I remake the kernel from GENERIC, the keyboard functions. However my config file below doesn't allow the keyboard to function properly. Also included is a boot verbose output from the distributed GENERIC kernel and a build of the enclosed config kernel.

#
# FNU
#

machine		i386
cpu		I586_CPU

ident		FNU
maxusers	10

#options         SMP                     # Symmetric MultiProcessor Kernel
#options         APIC_IO                 # Symmetric (APIC) I/O

options		"COMPAT_43"

options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING

options		SYSVSHM
options		SYSVSEM
options		SYSVMSG
options		KTRACE			#kernel tracing

options		INET			#Internet communications protocols
options		ICMP_BANDLIM		#Rate limit bad replies

options         USER_LDT
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev

pseudo-device	ether			#Generic Ethernet
pseudo-device	loop			#Network loopback device
pseudo-device	bpf			#Berkeley packet filter

options		FFS			#Fast filesystem
options		FFS_ROOT
options 	SOFTUPDATES		#Enable FFS soft updates support
options		NFS			#Network File System

options		CD9660			#ISO 9660 filesystem
options		CD9660_ROOT
options		MSDOSFS			#MS DOS File System
options		PROCFS			#Process filesystem

pseudo-device	splash
pseudo-device	pty		#Pseudo ttys - can go as high as 256
pseudo-device	speaker		#Play IBM BASIC-style noises out your speaker
pseudo-device	snp	1	#Snoop device
pseudo-device	gzip		#Exec gzipped a.out's

device		isa
device		eisa
device		pci

# Floppy
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0

# IDE controller and disks
device		ata0	at isa? port IO_WD1 irq 14
device		ata
device		atadisk			# ATA disk drives
options		ATA_STATIC_ID		# Static device numbering

# SCSI
device		ahc
device		scbus
device 		da
device		cd
device		sa
device		pass

options		SCSI_DELAY=5000

# atkbdc0 controlls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at isa? irq 1

device		vga0	at isa?

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100

device		npx0	at nexus? port IO_NPX irq 13

device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3

#options		COM_MULTIPORT		#code for some cards with shared IRQs

#device		sio2	at isa? port 0x100 flags 0x0905
#device		sio3	at isa? port 0x108 flags 0x0905
#device		sio4	at isa? port 0x110 flags 0x0905
#device		sio5	at isa? port 0x118 flags 0x0905
#device		sio6	at isa? port 0x120 flags 0x0905
#device		sio7	at isa? port 0x128 flags 0x0905
#device		sio8	at isa? port 0x130 flags 0x0905
#device		sio9	at isa? port 0x138 flags 0x0905 irq 12

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		ppi		# Parallel port interface device

# Ethernet
device		miibus		# MII bus support
device		vr


Nov 19 10:56:40 fnu /kernel.GENERIC: Copyright (c) 1992-2000 The FreeBSD Project.
Nov 19 10:56:40 fnu /kernel.GENERIC: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Nov 19 10:56:40 fnu /kernel.GENERIC: The Regents of the University of California. All rights reserved.
Nov 19 10:56:40 fnu /kernel.GENERIC: FreeBSD 4.1.1-RELEASE #0: Tue Sep 26 00:46:59 GMT 2000
Nov 19 10:56:40 fnu /kernel.GENERIC: jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Nov 19 10:56:40 fnu /kernel.GENERIC: Calibrating clock(s) ... TSC clock: 166455521 Hz, i8254 clock: 1193231 Hz
Nov 19 10:56:40 fnu /kernel.GENERIC: CLK_USE_I8254_CALIBRATION not specified - using default frequency
Nov 19 10:56:40 fnu /kernel.GENERIC: Timecounter "i8254"  frequency 1193182 Hz
Nov 19 10:56:40 fnu /kernel.GENERIC: CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Nov 19 10:56:40 fnu /kernel.GENERIC: CPU: Pentium/P54C (166.45-MHz 586-class CPU)
Nov 19 10:56:40 fnu /kernel.GENERIC: Origin = "GenuineIntel"  Id = 0x52c  Stepping = 12
Nov 19 10:56:40 fnu /kernel.GENERIC: Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
Nov 19 10:56:40 fnu /kernel.GENERIC: real memory  = 75497472 (73728K bytes)
Nov 19 10:56:40 fnu /kernel.GENERIC: Physical memory chunk(s):
Nov 19 10:56:40 fnu /kernel.GENERIC: 0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
Nov 19 10:56:40 fnu /kernel.GENERIC: 0x0042f000 - 0x047f7fff, 71077888 bytes (17353 pages)
Nov 19 10:56:40 fnu /kernel.GENERIC: avail memory = 69226496 (67604K bytes)
Nov 19 10:56:40 fnu /kernel.GENERIC: bios32: Found BIOS32 Service Directory header at 0xc00fa570
Nov 19 10:56:40 fnu /kernel.GENERIC: bios32: Entry = 0xfa8a0 (c00fa8a0)  Rev = 0  Len = 1
Nov 19 10:56:40 fnu /kernel.GENERIC: pcibios: PCI BIOS entry at 0xa8d0
Nov 19 10:56:40 fnu /kernel.GENERIC: Other BIOS signatures found:
Nov 19 10:56:40 fnu /kernel.GENERIC: ACPI: 00000000
Nov 19 10:56:40 fnu /kernel.GENERIC: Preloaded elf kernel "kernel.GENERIC" at 0xc0416000.
Nov 19 10:56:40 fnu /kernel.GENERIC: Intel Pentium detected, installing workaround for F00F bug
Nov 19 10:56:40 fnu /kernel.GENERIC: md0: Malloc disk
Nov 19 10:56:40 fnu /kernel.GENERIC: Creating DISK md0
Nov 19 10:56:40 fnu /kernel.GENERIC: Math emulator present
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_open(1a):	mode1res=0x00000000 (0x80000000)
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_open(1b):	mode1res=0x80000000 (0xff000001)
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_cfgcheck:	device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -- nothing found
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_open(2):	mode 2 enable port (0x0cf8) is 0x00
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_open(2a):	mode2res=0x0e (0x0e)
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_open(2a):	now trying mechanism 2
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=04a38086)
Nov 19 10:56:40 fnu /kernel.GENERIC: npx0: <math processor> on motherboard
Nov 19 10:56:40 fnu /kernel.GENERIC: npx0: INT 16 interface
Nov 19 10:56:40 fnu /kernel.GENERIC: i586_bzero() bandwidth = 291205591 bytes/sec
Nov 19 10:56:40 fnu /kernel.GENERIC: bzero() bandwidth = 146391450 bytes/sec
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_open(1a):	mode1res=0x00000000 (0x80000000)
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_open(1b):	mode1res=0x80000000 (0xff000001)
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_cfgcheck:	device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -- nothing found
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_open(2):	mode 2 enable port (0x0cf8) is 0x00
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_open(2a):	mode2res=0x0e (0x0e)
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_open(2a):	now trying mechanism 2
Nov 19 10:56:40 fnu /kernel.GENERIC: pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=04a38086)
Nov 19 10:56:40 fnu /kernel.GENERIC: pcib0: <Host to PCI bridge> on motherboard
Nov 19 10:56:40 fnu /kernel.GENERIC: found->	vendor=0x8086, dev=0x04a3, revid=0x11
Nov 19 10:56:40 fnu /kernel.GENERIC: class=06-00-00, hdrtype=0x00, mfdev=0
Nov 19 10:56:40 fnu /kernel.GENERIC: subordinatebus=0 	secondarybus=0
Nov 19 10:56:41 fnu /kernel.GENERIC: found->	vendor=0x8086, dev=0x0482, revid=0x05
Nov 19 10:56:41 fnu /kernel.GENERIC: class=00-00-00, hdrtype=0x00, mfdev=0
Nov 19 10:56:41 fnu /kernel.GENERIC: subordinatebus=0 	secondarybus=0
Nov 19 10:56:41 fnu /kernel.GENERIC: found->	vendor=0x10ee, dev=0x3fc1, revid=0x00
Nov 19 10:56:41 fnu /kernel.GENERIC: class=04-01-00, hdrtype=0x00, mfdev=0
Nov 19 10:56:41 fnu /kernel.GENERIC: subordinatebus=0 	secondarybus=0
Nov 19 10:56:41 fnu /kernel.GENERIC: intpin=a, irq=5
Nov 19 10:56:41 fnu /kernel.GENERIC: map[10]: type 1, range 32, base f4000000, size 24
Nov 19 10:56:41 fnu /kernel.GENERIC: found->	vendor=0x1106, dev=0x3043, revid=0x06
Nov 19 10:56:41 fnu /kernel.GENERIC: class=02-00-00, hdrtype=0x00, mfdev=0
Nov 19 10:56:41 fnu /kernel.GENERIC: subordinatebus=0 	secondarybus=0
Nov 19 10:56:41 fnu /kernel.GENERIC: intpin=a, irq=9
Nov 19 10:56:41 fnu /kernel.GENERIC: map[10]: type 1, range 32, base 00006000, size  7
Nov 19 10:56:41 fnu /kernel.GENERIC: map[14]: type 1, range 32, base f5000000, size  7
Nov 19 10:56:41 fnu /kernel.GENERIC: found->	vendor=0x5333, dev=0x5631, revid=0x06
Nov 19 10:56:41 fnu /kernel.GENERIC: class=03-00-00, hdrtype=0x00, mfdev=0
Nov 19 10:56:41 fnu /kernel.GENERIC: subordinatebus=0 	secondarybus=0
Nov 19 10:56:41 fnu /kernel.GENERIC: intpin=a, irq=10
Nov 19 10:56:41 fnu /kernel.GENERIC: map[10]: type 1, range 32, base f0000000, size 26
Nov 19 10:56:41 fnu /kernel.GENERIC: pci0: <PCI bus> on pcib0
Nov 19 10:56:41 fnu /kernel.GENERIC: CPU: Pentium, 100MHz, CPU->Memory posting ON
Nov 19 10:56:41 fnu /kernel.GENERIC: Warning: Cache parity disabled!
Nov 19 10:56:41 fnu /kernel.GENERIC: Warning: DRAM parity mask!
Nov 19 10:56:41 fnu /kernel.GENERIC: Cache: 512KB writeback, cache clocks=3-2-2-2/4-2-2-2
Nov 19 10:56:41 fnu /kernel.GENERIC: Cache flags:  byte-control
Nov 19 10:56:41 fnu /kernel.GENERIC: DRAM: page mode memory clocks=X-4-4-4 (70ns)
Nov 19 10:56:41 fnu /kernel.GENERIC: CPU->PCI: posting ON, burst mode OFF, PCI clocks=2-1-1-1
Nov 19 10:56:41 fnu /kernel.GENERIC: PCI->Memory: posting OFF
Nov 19 10:56:41 fnu /kernel.GENERIC: Refresh: RAS#Only
Nov 19 10:56:41 fnu /kernel.GENERIC: isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0
Nov 19 10:56:41 fnu /kernel.GENERIC: eisa0: <EISA bus> on isab0
Nov 19 10:56:41 fnu /kernel.GENERIC: mainboard0: <TYN0003 (System Board)> on eisa0 slot 0
Nov 19 10:56:41 fnu /kernel.GENERIC: ahc0: <Adaptec 274X SCSI adapter> at 0x4c00-0x4cff, irq 11 (level)
Nov 19 10:56:41 fnu /kernel.GENERIC: ahc0: on eisa0 slot 4
Nov 19 10:56:41 fnu /kernel.GENERIC: ahc0: Downloading Sequencer Program... 417 instructions downloaded
Nov 19 10:56:41 fnu /kernel.GENERIC: aic7770: Twin Channel, A SCSI Id=7, B SCSI Id=7, primary A, 4/255 SCBs
Nov 19 10:56:41 fnu /kernel.GENERIC: isa0: <ISA bus> on isab0
Nov 19 10:56:41 fnu /kernel.GENERIC: pci0: <unknown card> (vendor=0x10ee, dev=0x3fc1) at 13.0 irq 5
Nov 19 10:56:41 fnu /kernel.GENERIC: vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0x6000-0x607f mem 0xf5000000-0xf500007f irq 9 at device 14.0 on pci0
Nov 19 10:56:41 fnu /kernel.GENERIC: vr0: Ethernet address: 00:80:c8:e1:1d:85
Nov 19 10:56:41 fnu /kernel.GENERIC: miibus0: <MII bus> on vr0
Nov 19 10:56:41 fnu /kernel.GENERIC: amphy0: <DM9101 10/100 media interface> on miibus0
Nov 19 10:56:41 fnu /kernel.GENERIC: amphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Nov 19 10:56:41 fnu /kernel.GENERIC: bpf: vr0 attached
Nov 19 10:56:41 fnu /kernel.GENERIC: pci0: <S3 ViRGE graphics accelerator> (vendor=0x5333, dev=0x5631) at 15.0 irq 10
Nov 19 10:56:41 fnu /kernel.GENERIC: Trying Read_Port at 203
Nov 19 10:56:41 fnu /kernel.GENERIC: Trying Read_Port at 243
Nov 19 10:56:41 fnu /kernel.GENERIC: Trying Read_Port at 283
Nov 19 10:56:41 fnu /kernel.GENERIC: Trying Read_Port at 2c3
Nov 19 10:56:41 fnu /kernel.GENERIC: Trying Read_Port at 303
Nov 19 10:56:41 fnu /kernel.GENERIC: Trying Read_Port at 343
Nov 19 10:56:41 fnu /kernel.GENERIC: Trying Read_Port at 383
Nov 19 10:56:41 fnu /kernel.GENERIC: Trying Read_Port at 3c3
Nov 19 10:56:41 fnu /kernel.GENERIC: isa_probe_children: disabling PnP devices
Nov 19 10:56:41 fnu /kernel.GENERIC: isa_probe_children: probing non-PnP devices
Nov 19 10:56:41 fnu /kernel.GENERIC: fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Nov 19 10:56:41 fnu /kernel.GENERIC: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Nov 19 10:56:41 fnu /kernel.GENERIC: ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
Nov 19 10:56:41 fnu /kernel.GENERIC: ata0: mask=00 status0=ff status1=ff
Nov 19 10:56:41 fnu /kernel.GENERIC: ata0: probe allocation failed
Nov 19 10:56:42 fnu /kernel.GENERIC: ata0 failed to probe at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
Nov 19 10:56:42 fnu /kernel.GENERIC: ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
Nov 19 10:56:42 fnu /kernel.GENERIC: ata1: mask=00 status0=ff status1=ff
Nov 19 10:56:42 fnu /kernel.GENERIC: ata1: probe allocation failed
Nov 19 10:56:42 fnu /kernel.GENERIC: ata1 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0
Nov 19 10:56:42 fnu /kernel.GENERIC: adv0 failed to probe at port 0x330 on isa0
Nov 19 10:56:42 fnu /kernel.GENERIC: bt0: Failed Status Reg Test - ff
Nov 19 10:56:42 fnu /kernel.GENERIC: bt_isa_probe: Probe failed at 0x330
Nov 19 10:56:42 fnu /kernel.GENERIC: bt0: Failed Status Reg Test - ff
Nov 19 10:56:42 fnu /kernel.GENERIC: bt_isa_probe: Probe failed at 0x334
Nov 19 10:56:42 fnu /kernel.GENERIC: bt0: Failed Status Reg Test - ff
Nov 19 10:56:42 fnu /kernel.GENERIC: bt_isa_probe: Probe failed at 0x230
Nov 19 10:56:42 fnu /kernel.GENERIC: bt0: Failed Status Reg Test - ff
Nov 19 10:56:42 fnu /kernel.GENERIC: bt_isa_probe: Probe failed at 0x234
Nov 19 10:56:42 fnu /kernel.GENERIC: bt0: Failed Status Reg Test - df
Nov 19 10:56:42 fnu /kernel.GENERIC: bt_isa_probe: Probe failed at 0x130
Nov 19 10:56:42 fnu /kernel.GENERIC: bt0: Failed Status Reg Test - 0
Nov 19 10:56:42 fnu /kernel.GENERIC: bt_isa_probe: Probe failed at 0x134
Nov 19 10:56:42 fnu /kernel.GENERIC: bt0 failed to probe at port 0x134-0x137 on isa0
Nov 19 10:56:42 fnu /kernel.GENERIC: aha0: status reg test failed ff
Nov 19 10:56:42 fnu last message repeated 3 times
Nov 19 10:56:42 fnu /kernel.GENERIC: aha0: status reg test failed df
Nov 19 10:56:42 fnu /kernel.GENERIC: aha0: status reg test failed 0
Nov 19 10:56:42 fnu /kernel.GENERIC: aha0 failed to probe at port 0x134-0x137 on isa0
Nov 19 10:56:42 fnu /kernel.GENERIC: aic0 failed to probe at port 0x140-0x15f on isa0
Nov 19 10:56:42 fnu /kernel.GENERIC: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
Nov 19 10:56:42 fnu /kernel.GENERIC: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Nov 19 10:56:42 fnu /kernel.GENERIC: atkbd: the current kbd controller command byte 0065
Nov 19 10:56:42 fnu /kernel.GENERIC: atkbd: keyboard ID 0x41ab (2)
Nov 19 10:56:42 fnu /kernel.GENERIC: kbdc: RESET_KBD return code:00fa
Nov 19 10:56:42 fnu /kernel.GENERIC: kbdc: RESET_KBD status:00aa
Nov 19 10:56:42 fnu /kernel.GENERIC: kbd0 at atkbd0
Nov 19 10:56:42 fnu /kernel.GENERIC: kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
Nov 19 10:56:42 fnu /kernel.GENERIC: psm0: current command byte:0065
Nov 19 10:56:42 fnu /kernel.GENERIC: kbdc: TEST_AUX_PORT status:0000
Nov 19 10:56:42 fnu /kernel.GENERIC: kbdc: RESET_AUX return code:00fe
Nov 19 10:56:42 fnu last message repeated 2 times
Nov 19 10:56:42 fnu /kernel.GENERIC: kbdc: DIAGNOSE status:0055
Nov 19 10:56:42 fnu /kernel.GENERIC: kbdc: TEST_KBD_PORT status:0000
Nov 19 10:56:42 fnu /kernel.GENERIC: psm0: failed to reset the aux device.
Nov 19 10:56:42 fnu /kernel.GENERIC: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Nov 19 10:56:42 fnu /kernel.GENERIC: fb0: vga0, vga, type:VGA (5), flags:0x7007f
Nov 19 10:56:42 fnu /kernel.GENERIC: fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
Nov 19 10:56:42 fnu /kernel.GENERIC: fb0: init mode:24, bios mode:3, current mode:24
Nov 19 10:56:42 fnu /kernel.GENERIC: fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
Nov 19 10:56:42 fnu /kernel.GENERIC: VGA parameters upon power-up
Nov 19 10:56:42 fnu /kernel.GENERIC: 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
Nov 19 10:56:42 fnu /kernel.GENERIC: bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
Nov 19 10:56:42 fnu /kernel.GENERIC: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
Nov 19 10:56:42 fnu /kernel.GENERIC: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
Nov 19 10:56:42 fnu /kernel.GENERIC: VGA parameters in BIOS for mode 24
Nov 19 10:56:42 fnu /kernel.GENERIC: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
Nov 19 10:56:42 fnu /kernel.GENERIC: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
Nov 19 10:56:42 fnu /kernel.GENERIC: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
Nov 19 10:56:42 fnu /kernel.GENERIC: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
Nov 19 10:56:42 fnu /kernel.GENERIC: EGA/VGA parameters to be used for mode 24
Nov 19 10:56:42 fnu /kernel.GENERIC: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
Nov 19 10:56:42 fnu /kernel.GENERIC: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
Nov 19 10:56:42 fnu /kernel.GENERIC: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
Nov 19 10:56:42 fnu /kernel.GENERIC: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
Nov 19 10:56:42 fnu /kernel.GENERIC: sc0: <System console> at flags 0x100 on isa0
Nov 19 10:56:42 fnu /kernel.GENERIC: sc0: VGA <16 virtual consoles, flags=0x300>
Nov 19 10:56:43 fnu /kernel.GENERIC: sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
Nov 19 10:56:43 fnu /kernel.GENERIC: pcic0 failed to probe at port 0x3e0 iomem 0xd0000 irq 10 on isa0
Nov 19 10:56:43 fnu /kernel.GENERIC: pcic1: not probed (disabled)
Nov 19 10:56:43 fnu /kernel.GENERIC: sio0: irq maps: 0x41 0x51 0x41 0x41
Nov 19 10:56:43 fnu /kernel.GENERIC: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Nov 19 10:56:43 fnu /kernel.GENERIC: sio0: type 16450
Nov 19 10:56:43 fnu /kernel.GENERIC: sio1: irq maps: 0x41 0x49 0x41 0x41
Nov 19 10:56:43 fnu /kernel.GENERIC: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Nov 19 10:56:43 fnu /kernel.GENERIC: sio1: type 16450
Nov 19 10:56:43 fnu /kernel.GENERIC: sio2: not probed (disabled)
Nov 19 10:56:43 fnu /kernel.GENERIC: sio3: not probed (disabled)
Nov 19 10:56:43 fnu /kernel.GENERIC: ppc0: parallel port found at 0x378
Nov 19 10:56:43 fnu /kernel.GENERIC: ppc0: using extended I/O port range
Nov 19 10:56:43 fnu /kernel.GENERIC: ppc0: SPP
Nov 19 10:56:43 fnu /kernel.GENERIC: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
Nov 19 10:56:43 fnu /kernel.GENERIC: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
Nov 19 10:56:43 fnu /kernel.GENERIC: plip0: <PLIP network interface> on ppbus0
Nov 19 10:56:43 fnu /kernel.GENERIC: bpf: lp0 attached
Nov 19 10:56:43 fnu /kernel.GENERIC: lpt0: <Printer> on ppbus0
Nov 19 10:56:43 fnu /kernel.GENERIC: lpt0: Interrupt-driven port
Nov 19 10:56:43 fnu /kernel.GENERIC: ppi0: <Parallel I/O> on ppbus0
Nov 19 10:56:43 fnu /kernel.GENERIC: ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
Nov 19 10:56:43 fnu /kernel.GENERIC: fe0 failed to probe at port 0x300-0x31f on isa0
Nov 19 10:56:43 fnu /kernel.GENERIC: ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
Nov 19 10:56:43 fnu /kernel.GENERIC: le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
Nov 19 10:56:43 fnu /kernel.GENERIC: lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
Nov 19 10:56:43 fnu /kernel.GENERIC: cs0 failed to probe at port 0x300 on isa0
Nov 19 10:56:43 fnu /kernel.GENERIC: sn0 failed to probe at port 0x300 irq 10 on isa0
Nov 19 10:56:43 fnu /kernel.GENERIC: isa_probe_children: probing PnP devices
Nov 19 10:56:43 fnu /kernel.GENERIC: BIOS Geometries:
Nov 19 10:56:43 fnu /kernel.GENERIC: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
Nov 19 10:56:43 fnu /kernel.GENERIC: 0 accounted for
Nov 19 10:56:43 fnu /kernel.GENERIC: Device configuration finished.
Nov 19 10:56:43 fnu /kernel.GENERIC: bpf: ppp0 attached
Nov 19 10:56:43 fnu /kernel.GENERIC: new masks: bio 680040, tty 63009a, net 67029a
Nov 19 10:56:43 fnu /kernel.GENERIC: bpf: sl0 attached
Nov 19 10:56:43 fnu /kernel.GENERIC: bpf: faith0 attached
Nov 19 10:56:43 fnu /kernel.GENERIC: bpf: gif0 attached
Nov 19 10:56:43 fnu /kernel.GENERIC: bpf: gif1 attached
Nov 19 10:56:43 fnu /kernel.GENERIC: bpf: gif2 attached
Nov 19 10:56:43 fnu /kernel.GENERIC: bpf: gif3 attached
Nov 19 10:56:43 fnu /kernel.GENERIC: bpf: lo0 attached
Nov 19 10:56:43 fnu /kernel.GENERIC: Waiting 15 seconds for SCSI devices to settle
Nov 19 10:56:43 fnu /kernel.GENERIC: (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
Nov 19 10:56:43 fnu /kernel.GENERIC: (noperiph:ahc0:1:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
Nov 19 10:56:43 fnu /kernel.GENERIC: ahc0: target 1 synchronous at 10.0MHz, offset = 0xf
Nov 19 10:56:43 fnu /kernel.GENERIC: Sending SDTR!
Nov 19 10:56:43 fnu /kernel.GENERIC: (probe9:ahc0:1:2:0): INQUIRY. CDB: 12 1 80 0 ff 0 
Nov 19 10:56:43 fnu /kernel.GENERIC: (probe9:ahc0:1:2:0): ILLEGAL REQUEST asc:24,0
Nov 19 10:56:43 fnu /kernel.GENERIC: (probe9:ahc0:1:2:0): Invalid field in CDB
Nov 19 10:56:43 fnu /kernel.GENERIC: (probe3:ahc0:0:3:0): INQUIRY. CDB: 12 1 80 0 ff 0 
Nov 19 10:56:43 fnu /kernel.GENERIC: (probe3:ahc0:0:3:0): ILLEGAL REQUEST asc:24,0
Nov 19 10:56:43 fnu /kernel.GENERIC: (probe3:ahc0:0:3:0): Invalid field in CDB sks:cf,2
Nov 19 10:56:43 fnu /kernel.GENERIC: ahc0: target 3 synchronous at 10.0MHz, offset = 0xf
Nov 19 10:56:43 fnu /kernel.GENERIC: Creating DISK da0
Nov 19 10:56:43 fnu /kernel.GENERIC: sa0 at ahc0 bus 0 target 3 lun 0
Nov 19 10:56:43 fnu /kernel.GENERIC: sa0: <HP C5683A C908> Removable Sequential Access SCSI-2 device 
Nov 19 10:56:43 fnu /kernel.GENERIC: sa0: 10.000MB/s transfers (10.000MHz, offset 15)
Nov 19 10:56:43 fnu /kernel.GENERIC: Creating DISK cd0
Nov 19 10:56:43 fnu /kernel.GENERIC: pass0 at ahc0 bus 0 target 3 lun 0
Nov 19 10:56:44 fnu /kernel.GENERIC: pass0: <HP C5683A C908> Removable Sequential Access SCSI-2 device 
Nov 19 10:56:44 fnu /kernel.GENERIC: pass0: 10.000MB/s transfers (10.000MHz, offset 15)
Nov 19 10:56:44 fnu /kernel.GENERIC: pass1 at ahc0 bus 1 target 1 lun 0
Nov 19 10:56:44 fnu /kernel.GENERIC: pass1: <WDIGTL WDE9100 1.50> Fixed Direct Access SCSI-2 device 
Nov 19 10:56:44 fnu /kernel.GENERIC: pass1: Serial Number WS7020328292
Nov 19 10:56:44 fnu /kernel.GENERIC: pass1: 10.000MB/s transfers (10.000MHz, offset 15)
Nov 19 10:56:44 fnu /kernel.GENERIC: pass2 at ahc0 bus 1 target 2 lun 0
Nov 19 10:56:44 fnu /kernel.GENERIC: pass2: <TEXEL CD-ROM DM-XX28 3.05> Removable CD-ROM SCSI-2 device 
Nov 19 10:56:44 fnu /kernel.GENERIC: pass2: 3.300MB/s transfers
Nov 19 10:56:44 fnu /kernel.GENERIC: Mounting root from ufs:/dev/da0s2a
Nov 19 10:56:44 fnu /kernel.GENERIC: (cd0:ahc0:1:2:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
Nov 19 10:56:44 fnu /kernel.GENERIC: (cd0:ahc0:1:2:0): NOT READY asc:3a,0
Nov 19 10:56:44 fnu /kernel.GENERIC: (cd0:ahc0:1:2:0): Medium not present
Nov 19 10:56:44 fnu /kernel.GENERIC: cd0 at ahc0 bus 1 target 2 lun 0
Nov 19 10:56:44 fnu /kernel.GENERIC: cd0: <TEXEL CD-ROM DM-XX28 3.05> Removable CD-ROM SCSI-2 device 
Nov 19 10:56:44 fnu /kernel.GENERIC: cd0: 3.300MB/s transfers
Nov 19 10:56:44 fnu /kernel.GENERIC: cd0: Attempt to query device size failed: NOT READY, Medium not present
Nov 19 10:56:44 fnu /kernel.GENERIC: da0 at ahc0 bus 1 target 1 lun 0
Nov 19 10:56:44 fnu /kernel.GENERIC: da0: <WDIGTL WDE9100 1.50> Fixed Direct Access SCSI-2 device 
Nov 19 10:56:44 fnu /kernel.GENERIC: da0: Serial Number WS7020328292
Nov 19 10:56:44 fnu /kernel.GENERIC: da0: 10.000MB/s transfers (10.000MHz, offset 15)
Nov 19 10:56:44 fnu /kernel.GENERIC: da0: 8683MB (17783204 512 byte sectors: 255H 63S/T 1106C)
Nov 19 10:56:44 fnu /kernel.GENERIC: da0s1: type 0x6, start 63, end = 80324, size 80262 : OK
Nov 19 10:56:44 fnu /kernel.GENERIC: da0s2: type 0xa5, start 80325, end = 17767889, size 17687565 : OK
Nov 19 10:56:44 fnu /kernel.GENERIC: start_init: trying /sbin/init
Nov 19 10:56:44 fnu ntpd[86]: ntpd 4.0.99b Sat Nov 11 04:57:21 MST 2000 (1)
Nov 19 10:56:44 fnu ntpd[86]: using kernel phase-lock loop 2040
Nov 19 10:56:44 fnu ntpd[86]: using kernel phase-lock loop 2041
Nov 19 10:56:47 fnu /kernel.GENERIC: Linux-ELF exec handler installed
Nov 19 10:56:58 fnu login: ROOT LOGIN (root) ON ttyv0
Nov 19 10:57:05 fnu reboot: rebooted by root
Nov 19 10:57:05 fnu syslogd: exiting on signal 15
Nov 19 10:58:22 fnu /kernel: Copyright (c) 1992-2000 The FreeBSD Project.
Nov 19 10:58:22 fnu /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Nov 19 10:58:22 fnu /kernel: The Regents of the University of California. All rights reserved.
Nov 19 10:58:22 fnu /kernel: FreeBSD 4.2-BETA #0: Sun Nov 19 00:53:58 MST 2000
Nov 19 10:58:22 fnu /kernel: root@fnu.iranger.com:/usr/src/sys/compile/IRANGER
Nov 19 10:58:22 fnu /kernel: Calibrating clock(s) ... TSC clock: 166455269 Hz, i8254 clock: 1193228 Hz
Nov 19 10:58:22 fnu /kernel: CLK_USE_I8254_CALIBRATION not specified - using default frequency
Nov 19 10:58:22 fnu /kernel: Timecounter "i8254"  frequency 1193182 Hz
Nov 19 10:58:22 fnu /kernel: CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Nov 19 10:58:22 fnu /kernel: Timecounter "TSC"  frequency 166449765 Hz
Nov 19 10:58:22 fnu /kernel: CPU: Pentium/P54C (166.45-MHz 586-class CPU)
Nov 19 10:58:22 fnu /kernel: Origin = "GenuineIntel"  Id = 0x52c  Stepping = 12
Nov 19 10:58:22 fnu /kernel: Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
Nov 19 10:58:22 fnu /kernel: real memory  = 75497472 (73728K bytes)
Nov 19 10:58:22 fnu /kernel: Physical memory chunk(s):
Nov 19 10:58:22 fnu /kernel: 0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
Nov 19 10:58:22 fnu /kernel: 0x00306000 - 0x047f7fff, 72294400 bytes (17650 pages)
Nov 19 10:58:22 fnu /kernel: avail memory = 70483968 (68832K bytes)
Nov 19 10:58:22 fnu /kernel: bios32: Found BIOS32 Service Directory header at 0xc00fa570
Nov 19 10:58:22 fnu /kernel: bios32: Entry = 0xfa8a0 (c00fa8a0)  Rev = 0  Len = 1
Nov 19 10:58:22 fnu /kernel: pcibios: PCI BIOS entry at 0xa8d0
Nov 19 10:58:22 fnu /kernel: Other BIOS signatures found:
Nov 19 10:58:22 fnu /kernel: ACPI: 00000000
Nov 19 10:58:22 fnu /kernel: Preloaded elf kernel "kernel" at 0xc02ed000.
Nov 19 10:58:22 fnu /kernel: Intel Pentium detected, installing workaround for F00F bug
Nov 19 10:58:22 fnu /kernel: pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
Nov 19 10:58:22 fnu /kernel: pci_open(1a):	mode1res=0x00000000 (0x80000000)
Nov 19 10:58:22 fnu /kernel: pci_open(1b):	mode1res=0x80000000 (0xff000001)
Nov 19 10:58:22 fnu /kernel: pci_cfgcheck:	device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -- nothing found
Nov 19 10:58:22 fnu /kernel: pci_open(2):	mode 2 enable port (0x0cf8) is 0x00
Nov 19 10:58:22 fnu /kernel: pci_open(2a):	mode2res=0x0e (0x0e)
Nov 19 10:58:22 fnu /kernel: pci_open(2a):	now trying mechanism 2
Nov 19 10:58:22 fnu /kernel: pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=04a38086)
Nov 19 10:58:22 fnu /kernel: npx0: <math processor> on motherboard
Nov 19 10:58:22 fnu /kernel: npx0: INT 16 interface
Nov 19 10:58:22 fnu /kernel: i586_bzero() bandwidth = 74482347 bytes/sec
Nov 19 10:58:22 fnu /kernel: bzero() bandwidth = 37275878 bytes/sec
Nov 19 10:58:22 fnu /kernel: pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
Nov 19 10:58:22 fnu /kernel: pci_open(1a):	mode1res=0x00000000 (0x80000000)
Nov 19 10:58:22 fnu /kernel: pci_open(1b):	mode1res=0x80000000 (0xff000001)
Nov 19 10:58:22 fnu /kernel: pci_cfgcheck:	device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -- nothing found
Nov 19 10:58:22 fnu /kernel: pci_open(2):	mode 2 enable port (0x0cf8) is 0x00
Nov 19 10:58:22 fnu /kernel: pci_open(2a):	mode2res=0x0e (0x0e)
Nov 19 10:58:22 fnu /kernel: pci_open(2a):	now trying mechanism 2
Nov 19 10:58:22 fnu /kernel: pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=04a38086)
Nov 19 10:58:22 fnu /kernel: pcib0: <Host to PCI bridge> on motherboard
Nov 19 10:58:22 fnu /kernel: found->	vendor=0x8086, dev=0x04a3, revid=0x11
Nov 19 10:58:22 fnu /kernel: class=06-00-00, hdrtype=0x00, mfdev=0
Nov 19 10:58:22 fnu /kernel: subordinatebus=0 	secondarybus=0
Nov 19 10:58:22 fnu /kernel: found->	vendor=0x8086, dev=0x0482, revid=0x05
Nov 19 10:58:22 fnu /kernel: class=00-00-00, hdrtype=0x00, mfdev=0
Nov 19 10:58:22 fnu /kernel: subordinatebus=0 	secondarybus=0
Nov 19 10:58:22 fnu /kernel: found->	vendor=0x10ee, dev=0x3fc1, revid=0x00
Nov 19 10:58:22 fnu /kernel: class=04-01-00, hdrtype=0x00, mfdev=0
Nov 19 10:58:23 fnu /kernel: subordinatebus=0 	secondarybus=0
Nov 19 10:58:23 fnu /kernel: intpin=a, irq=5
Nov 19 10:58:23 fnu /kernel: map[10]: type 1, range 32, base f4000000, size 24
Nov 19 10:58:23 fnu /kernel: found->	vendor=0x1106, dev=0x3043, revid=0x06
Nov 19 10:58:23 fnu /kernel: class=02-00-00, hdrtype=0x00, mfdev=0
Nov 19 10:58:23 fnu /kernel: subordinatebus=0 	secondarybus=0
Nov 19 10:58:23 fnu /kernel: intpin=a, irq=9
Nov 19 10:58:23 fnu /kernel: map[10]: type 1, range 32, base 00006000, size  7
Nov 19 10:58:23 fnu /kernel: map[14]: type 1, range 32, base f5000000, size  7
Nov 19 10:58:23 fnu /kernel: found->	vendor=0x5333, dev=0x5631, revid=0x06
Nov 19 10:58:23 fnu /kernel: class=03-00-00, hdrtype=0x00, mfdev=0
Nov 19 10:58:23 fnu /kernel: subordinatebus=0 	secondarybus=0
Nov 19 10:58:23 fnu /kernel: intpin=a, irq=10
Nov 19 10:58:23 fnu /kernel: map[10]: type 1, range 32, base f0000000, size 26
Nov 19 10:58:23 fnu /kernel: pci0: <PCI bus> on pcib0
Nov 19 10:58:23 fnu /kernel: CPU: Pentium, 100MHz, CPU->Memory posting ON
Nov 19 10:58:23 fnu /kernel: Warning: Cache parity disabled!
Nov 19 10:58:23 fnu /kernel: Warning: DRAM parity mask!
Nov 19 10:58:23 fnu /kernel: Cache: 512KB writeback, cache clocks=3-2-2-2/4-2-2-2
Nov 19 10:58:23 fnu /kernel: Cache flags:  byte-control
Nov 19 10:58:23 fnu /kernel: DRAM: page mode memory clocks=X-4-4-4 (70ns)
Nov 19 10:58:23 fnu /kernel: CPU->PCI: posting ON, burst mode OFF, PCI clocks=2-1-1-1
Nov 19 10:58:23 fnu /kernel: PCI->Memory: posting OFF
Nov 19 10:58:23 fnu /kernel: Refresh: RAS#Only
Nov 19 10:58:23 fnu /kernel: isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0
Nov 19 10:58:23 fnu /kernel: eisa0: <EISA bus> on isab0
Nov 19 10:58:23 fnu /kernel: mainboard0: <TYN0003 (System Board)> on eisa0 slot 0
Nov 19 10:58:23 fnu /kernel: ahc0: <Adaptec 274X SCSI adapter> at 0x4c00-0x4cff, irq 11 (level)
Nov 19 10:58:23 fnu /kernel: ahc0: on eisa0 slot 4
Nov 19 10:58:23 fnu /kernel: ahc0: Downloading Sequencer Program... 405 instructions downloaded
Nov 19 10:58:23 fnu /kernel: aic7770: Twin Channel, A SCSI Id=7, B SCSI Id=7, primary A, 4/255 SCBs
Nov 19 10:58:23 fnu /kernel: isa0: <ISA bus> on isab0
Nov 19 10:58:23 fnu /kernel: pci0: <unknown card> (vendor=0x10ee, dev=0x3fc1) at 13.0 irq 5
Nov 19 10:58:23 fnu /kernel: vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0x6000-0x607f mem 0xf5000000-0xf500007f irq 9 at device 14.0 on pci0
Nov 19 10:58:23 fnu /kernel: vr0: Ethernet address: 00:80:c8:e1:1d:85
Nov 19 10:58:23 fnu /kernel: miibus0: <MII bus> on vr0
Nov 19 10:58:23 fnu /kernel: amphy0: <DM9101 10/100 media interface> on miibus0
Nov 19 10:58:23 fnu /kernel: amphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Nov 19 10:58:23 fnu /kernel: bpf: vr0 attached
Nov 19 10:58:23 fnu /kernel: pci0: <S3 ViRGE graphics accelerator> (vendor=0x5333, dev=0x5631) at 15.0 irq 10
Nov 19 10:58:23 fnu /kernel: Trying Read_Port at 203
Nov 19 10:58:23 fnu /kernel: Trying Read_Port at 243
Nov 19 10:58:23 fnu /kernel: Trying Read_Port at 283
Nov 19 10:58:23 fnu /kernel: Trying Read_Port at 2c3
Nov 19 10:58:23 fnu /kernel: Trying Read_Port at 303
Nov 19 10:58:23 fnu /kernel: Trying Read_Port at 343
Nov 19 10:58:23 fnu /kernel: Trying Read_Port at 383
Nov 19 10:58:23 fnu /kernel: Trying Read_Port at 3c3
Nov 19 10:58:23 fnu /kernel: isa_probe_children: disabling PnP devices
Nov 19 10:58:23 fnu /kernel: isa_probe_children: probing non-PnP devices
Nov 19 10:58:23 fnu /kernel: fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
Nov 19 10:58:23 fnu /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Nov 19 10:58:23 fnu /kernel: ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
Nov 19 10:58:23 fnu /kernel: ata0: mask=00 status0=ff status1=ff
Nov 19 10:58:23 fnu /kernel: ata0: probe allocation failed
Nov 19 10:58:23 fnu /kernel: ata0 failed to probe at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
Nov 19 10:58:23 fnu /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
Nov 19 10:58:24 fnu /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Nov 19 10:58:24 fnu /kernel: fb0: vga0, vga, type:VGA (5), flags:0x7007f
Nov 19 10:58:24 fnu /kernel: fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
Nov 19 10:58:24 fnu /kernel: fb0: init mode:24, bios mode:3, current mode:24
Nov 19 10:58:24 fnu /kernel: fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
Nov 19 10:58:24 fnu /kernel: VGA parameters upon power-up
Nov 19 10:58:24 fnu /kernel: 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
Nov 19 10:58:24 fnu /kernel: bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
Nov 19 10:58:24 fnu /kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
Nov 19 10:58:24 fnu /kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
Nov 19 10:58:24 fnu /kernel: VGA parameters in BIOS for mode 24
Nov 19 10:58:24 fnu /kernel: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
Nov 19 10:58:24 fnu /kernel: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
Nov 19 10:58:24 fnu /kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
Nov 19 10:58:24 fnu /kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
Nov 19 10:58:24 fnu /kernel: EGA/VGA parameters to be used for mode 24
Nov 19 10:58:24 fnu /kernel: 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
Nov 19 10:58:24 fnu /kernel: bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
Nov 19 10:58:24 fnu /kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
Nov 19 10:58:24 fnu /kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
Nov 19 10:58:24 fnu /kernel: atkbd: the current kbd controller command byte 0065
Nov 19 10:58:24 fnu /kernel: atkbd: keyboard ID 0x41ab (2)
Nov 19 10:58:24 fnu /kernel: kbdc: RESET_KBD return code:00fa
Nov 19 10:58:24 fnu /kernel: kbdc: RESET_KBD status:00aa
Nov 19 10:58:24 fnu /kernel: sc0: <System console> at flags 0x100 on isa0
Nov 19 10:58:24 fnu /kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Nov 19 10:58:24 fnu /kernel: sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
Nov 19 10:58:24 fnu /kernel: sio0: irq maps: 0x41 0x51 0x41 0x41
Nov 19 10:58:24 fnu /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Nov 19 10:58:24 fnu /kernel: sio0: type 16450
Nov 19 10:58:24 fnu /kernel: sio1: irq maps: 0x41 0x49 0x41 0x41
Nov 19 10:58:24 fnu /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Nov 19 10:58:24 fnu /kernel: sio1: type 16450
Nov 19 10:58:24 fnu /kernel: ppc0: parallel port found at 0x378
Nov 19 10:58:24 fnu /kernel: ppc0: using extended I/O port range
Nov 19 10:58:24 fnu /kernel: ppc0: SPP
Nov 19 10:58:24 fnu /kernel: ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
Nov 19 10:58:24 fnu /kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
Nov 19 10:58:24 fnu /kernel: lpt0: <Printer> on ppbus0
Nov 19 10:58:24 fnu /kernel: lpt0: Interrupt-driven port
Nov 19 10:58:24 fnu /kernel: ppi0: <Parallel I/O> on ppbus0
Nov 19 10:58:24 fnu /kernel: isa_probe_children: probing PnP devices
Nov 19 10:58:24 fnu /kernel: BIOS Geometries:
Nov 19 10:58:24 fnu /kernel: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
Nov 19 10:58:24 fnu /kernel: 0 accounted for
Nov 19 10:58:24 fnu /kernel: Device configuration finished.
Nov 19 10:58:25 fnu /kernel: bpf: lo0 attached
Nov 19 10:58:25 fnu /kernel: Waiting 5 seconds for SCSI devices to settle
Nov 19 10:58:25 fnu /kernel: (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
Nov 19 10:58:25 fnu /kernel: (noperiph:ahc0:1:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
Nov 19 10:58:25 fnu /kernel: (ahc0:B:1:0): Received SDTR period c, offset f
Nov 19 10:58:25 fnu /kernel: Filtered to period 0, offset 0
Nov 19 10:58:25 fnu /kernel: (ahc0:B:1:0): Target Initiated SDTR
Nov 19 10:58:25 fnu /kernel: (ahc0:B:1:0): Sending SDTR period 0, offset 0
Nov 19 10:58:25 fnu /kernel: (probe9:ahc0:1:2:0): INQUIRY. CDB: 12 1 80 0 ff 0 
Nov 19 10:58:25 fnu /kernel: (probe9:ahc0:1:2:0): ILLEGAL REQUEST asc:24,0
Nov 19 10:58:25 fnu /kernel: (probe9:ahc0:1:2:0): Invalid field in CDB
Nov 19 10:58:25 fnu /kernel: (probe3:ahc0:0:3:0): INQUIRY. CDB: 12 1 80 0 ff 0 
Nov 19 10:58:25 fnu /kernel: (probe3:ahc0:0:3:0): ILLEGAL REQUEST asc:24,0
Nov 19 10:58:25 fnu /kernel: (probe3:ahc0:0:3:0): Invalid field in CDB sks:cf,2
Nov 19 10:58:25 fnu /kernel: (ahc0:A:3:0): Sending SDTR period 19, offset f
Nov 19 10:58:25 fnu /kernel: (ahc0:A:3:0): Received SDTR period 19, offset f
Nov 19 10:58:25 fnu /kernel: Filtered to period 19, offset f
Nov 19 10:58:25 fnu /kernel: ahc0: target 3 synchronous at 10.0MHz, offset = 0xf
Nov 19 10:58:25 fnu /kernel: (ahc0:A:3:0): Sending SDTR period 19, offset f
Nov 19 10:58:25 fnu /kernel: (ahc0:A:3:0): Received SDTR period 19, offset f
Nov 19 10:58:25 fnu /kernel: Filtered to period 19, offset f
Nov 19 10:58:25 fnu /kernel: (ahc0:B:1:0): Sending SDTR period 19, offset f
Nov 19 10:58:25 fnu /kernel: (ahc0:B:1:0): Received SDTR period 19, offset f
Nov 19 10:58:25 fnu /kernel: Filtered to period 19, offset f
Nov 19 10:58:25 fnu /kernel: ahc0: target 1 synchronous at 10.0MHz, offset = 0xf
Nov 19 10:58:25 fnu /kernel: Creating DISK da0
Nov 19 10:58:25 fnu /kernel: sa0 at ahc0 bus 0 target 3 lun 0
Nov 19 10:58:25 fnu /kernel: sa0: <HP C5683A C908> Removable Sequential Access SCSI-2 device 
Nov 19 10:58:25 fnu /kernel: sa0: 10.000MB/s transfers (10.000MHz, offset 15)
Nov 19 10:58:25 fnu /kernel: Creating DISK cd0
Nov 19 10:58:25 fnu /kernel: pass0 at ahc0 bus 0 target 3 lun 0
Nov 19 10:58:25 fnu /kernel: pass0: <HP C5683A C908> Removable Sequential Access SCSI-2 device 
Nov 19 10:58:25 fnu /kernel: pass0: 10.000MB/s transfers (10.000MHz, offset 15)
Nov 19 10:58:25 fnu /kernel: pass1 at ahc0 bus 1 target 1 lun 0
Nov 19 10:58:25 fnu /kernel: pass1: <WDIGTL WDE9100 1.50> Fixed Direct Access SCSI-2 device 
Nov 19 10:58:25 fnu /kernel: pass1: Serial Number WS7020328292
Nov 19 10:58:25 fnu /kernel: pass1: 10.000MB/s transfers (10.000MHz, offset 15)
Nov 19 10:58:25 fnu /kernel: pass2 at ahc0 bus 1 target 2 lun 0
Nov 19 10:58:25 fnu /kernel: pass2: <TEXEL CD-ROM DM-XX28 3.05> Removable CD-ROM SCSI-2 device 
Nov 19 10:58:25 fnu /kernel: pass2: 3.300MB/s transfers
Nov 19 10:58:25 fnu /kernel: Mounting root from ufs:/dev/da0s2a
Nov 19 10:58:25 fnu /kernel: (cd0:ahc0:1:2:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
Nov 19 10:58:25 fnu /kernel: (cd0:ahc0:1:2:0): NOT READY asc:3a,0
Nov 19 10:58:25 fnu /kernel: (cd0:ahc0:1:2:0): Medium not present
Nov 19 10:58:25 fnu /kernel: cd0 at ahc0 bus 1 target 2 lun 0
Nov 19 10:58:25 fnu /kernel: cd0: <TEXEL CD-ROM DM-XX28 3.05> Removable CD-ROM SCSI-2 device 
Nov 19 10:58:25 fnu /kernel: cd0: 3.300MB/s transfers
Nov 19 10:58:25 fnu /kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present
Nov 19 10:58:25 fnu /kernel: da0 at ahc0 bus 1 target 1 lun 0
Nov 19 10:58:25 fnu /kernel: da0: <WDIGTL WDE9100 1.50> Fixed Direct Access SCSI-2 device 
Nov 19 10:58:26 fnu /kernel: da0: Serial Number WS7020328292
Nov 19 10:58:26 fnu /kernel: da0: 10.000MB/s transfers (10.000MHz, offset 15)
Nov 19 10:58:26 fnu /kernel: da0: 8683MB (17783204 512 byte sectors: 255H 63S/T 1106C)
Nov 19 10:58:26 fnu /kernel: da0s1: type 0x6, start 63, end = 80324, size 80262 : OK
Nov 19 10:58:26 fnu /kernel: da0s2: type 0xa5, start 80325, end = 17767889, size 17687565 : OK
Nov 19 10:58:26 fnu /kernel: start_init: trying /sbin/init
Nov 19 10:58:26 fnu ntpd[87]: ntpd 4.0.99b Sat Nov 11 04:57:21 MST 2000 (1)
Nov 19 10:58:26 fnu ntpd[87]: using kernel phase-lock loop 2040
Nov 19 10:58:26 fnu ntpd[87]: using kernel phase-lock loop 2041
Nov 19 10:58:29 fnu /kernel: Linux-ELF exec handler installed

Fix: 

None. Tried including different devices from GENERIC kernel to see if it made a difference but I couldn't figure out a work-around.
How-To-Repeat: Make a kernel using this config and attempt to boot on a tyan tempest II motherboard.
Comment 1 Bruce A. Mah freebsd_committer freebsd_triage 2001-11-17 18:47:46 UTC 
State Changed
From-To: open->feedback

Is this still a problem on more recent versions of FreeBSD?
Comment 2 Kris Kennaway freebsd_committer freebsd_triage 2002-01-06 08:45:24 UTC 
State Changed
From-To: feedback->closed

Feedback timeout