Summary: | cxgb(4): Driver doesn't work with latest (7.12) Chelsio firmware: found newer FW version(7.12), driver compiled for version 7.11 | ||||||
---|---|---|---|---|---|---|---|
Product: | Base System | Reporter: | gnoma <gnoma_86> | ||||
Component: | kern | Assignee: | Navdeep Parhar <np> | ||||
Status: | Closed Unable to Reproduce | ||||||
Severity: | Affects Some People | CC: | mmacy, np | ||||
Priority: | --- | Keywords: | needs-qa | ||||
Version: | 12.0-RELEASE | Flags: | koobs:
mfc-stable12?
koobs: mfc-stable11? |
||||
Hardware: | amd64 | ||||||
OS: | Any | ||||||
Attachments: |
|
Description
gnoma
2019-05-19 12:21:17 UTC
Created attachment 204468 [details]
Patched the file with the latest 7.12 firmware
Patched the file with the latest firmware 7.12.
Link is now changing to up, haven't tasted it further.
Can this be closed based on comment 1? It is not clear what the original problem was. The "found newer FW ..." message is purely informational and the driver carries on normally with attach after logging that message. Changing the firmware bundled with the driver to match the card should not have made a difference. (In reply to Navdeep Parhar from comment #2) Yes but please check the last line of the initial description: "NICs are being loaded as interfaces. However when I plug the cable it's shown as no carrier." And the last sentence: "when I plug the cable it's shown as no carrier." This is the original problem. (In reply to gnoma from comment #3) I get that the link did not come up originally. My point is that adding the 7.12 firmware to the driver should not have made any difference. It just suppressed the informational message about there being a new firmware on the card. The rest of driver attach should be identical in both cases. And yet the link came up the second time but not the first? That's hard to explain. I think this can be closed as "unable to reproduce" given that the driver was using the same firmware in both the scenarios but link didn't come up the first time, for reasons unknown. |