Bug 250338
| Summary: | External USB disk becomes inaccessible after a reboot | ||
|---|---|---|---|
| Product: | Base System | Reporter: | martin |
| Component: | usb | Assignee: | freebsd-usb (Nobody) <usb> |
| Status: | Open --- | ||
| Severity: | Affects Only Me | CC: | lwhsu |
| Priority: | --- | ||
| Version: | 11.4-RELEASE | ||
| Hardware: | amd64 | ||
| OS: | Any | ||
Can you check if this is still happening on 12.2? Yes, it fails with the same CAM status 0x44 when booting from the 12.2-RELEASE live CD. |
I have an external USB disk that works perfectly when connected to a running system, but becomes inaccessible (no /dev nodes) after rebooting while it is connected. Disconnecting and reconnecting the USB cable makes it work again. Here is the dmesg output, which ends in some USB error messages that are probably related. The messages from "ugen0.3: <Seagate Basic> at usbus0" to "umass0: detached" are then repeated every 20 seconds until the cable is disconnected. Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.4-RELEASE-p3 #0: Tue Sep 1 08:22:33 UTC 2020 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 10.0.0 (git@github.com:llvm/llvm-project.git llvmorg-10.0.0-0-gd32170dbd5b) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E5-2670 v2 @ 2.50GHz (2494.04-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 137438953472 (131072 MB) avail memory = 133533343744 (127347 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL S2600CP> FreeBSD/SMP: Multiprocessor System Detected: 40 CPUs FreeBSD/SMP: 2 package(s) x 10 core(s) x 2 hardware threads Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20171214/tbfadt-850) ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard SMP: AP CPU #36 Launched! SMP: AP CPU #28 Launched! SMP: AP CPU #10 Launched! SMP: AP CPU #17 Launched! SMP: AP CPU #38 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #12 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #27 Launched! SMP: AP CPU #9 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #23 Launched! SMP: AP CPU #35 Launched! SMP: AP CPU #19 Launched! SMP: AP CPU #37 Launched! SMP: AP CPU #18 Launched! SMP: AP CPU #13 Launched! SMP: AP CPU #33 Launched! SMP: AP CPU #15 Launched! SMP: AP CPU #26 Launched! SMP: AP CPU #30 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #8 Launched! SMP: AP CPU #24 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #22 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #21 Launched! SMP: AP CPU #34 Launched! SMP: AP CPU #16 Launched! SMP: AP CPU #32 Launched! SMP: AP CPU #14 Launched! SMP: AP CPU #20 Launched! SMP: AP CPU #25 Launched! SMP: AP CPU #11 Launched! SMP: AP CPU #31 Launched! SMP: AP CPU #39 Launched! SMP: AP CPU #29 Launched! Timecounter "TSC-low" frequency 1247019914 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 000.000029 [4213] netmap_init netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff80ff20a0, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <INTEL S2600CP> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> numa-domain 0 on acpi0 cpu1: <ACPI CPU> numa-domain 0 on acpi0 cpu2: <ACPI CPU> numa-domain 0 on acpi0 cpu3: <ACPI CPU> numa-domain 0 on acpi0 cpu4: <ACPI CPU> numa-domain 0 on acpi0 cpu5: <ACPI CPU> numa-domain 0 on acpi0 cpu6: <ACPI CPU> numa-domain 0 on acpi0 cpu7: <ACPI CPU> numa-domain 0 on acpi0 cpu8: <ACPI CPU> numa-domain 0 on acpi0 cpu9: <ACPI CPU> numa-domain 0 on acpi0 cpu10: <ACPI CPU> numa-domain 0 on acpi0 cpu11: <ACPI CPU> numa-domain 0 on acpi0 cpu12: <ACPI CPU> numa-domain 0 on acpi0 cpu13: <ACPI CPU> numa-domain 0 on acpi0 cpu14: <ACPI CPU> numa-domain 0 on acpi0 cpu15: <ACPI CPU> numa-domain 0 on acpi0 cpu16: <ACPI CPU> numa-domain 0 on acpi0 cpu17: <ACPI CPU> numa-domain 0 on acpi0 cpu18: <ACPI CPU> numa-domain 0 on acpi0 cpu19: <ACPI CPU> numa-domain 0 on acpi0 cpu20: <ACPI CPU> numa-domain 1 on acpi0 cpu21: <ACPI CPU> numa-domain 1 on acpi0 cpu22: <ACPI CPU> numa-domain 1 on acpi0 cpu23: <ACPI CPU> numa-domain 1 on acpi0 cpu24: <ACPI CPU> numa-domain 1 on acpi0 cpu25: <ACPI CPU> numa-domain 1 on acpi0 cpu26: <ACPI CPU> numa-domain 1 on acpi0 cpu27: <ACPI CPU> numa-domain 1 on acpi0 cpu28: <ACPI CPU> numa-domain 1 on acpi0 cpu29: <ACPI CPU> numa-domain 1 on acpi0 cpu30: <ACPI CPU> numa-domain 1 on acpi0 cpu31: <ACPI CPU> numa-domain 1 on acpi0 cpu32: <ACPI CPU> numa-domain 1 on acpi0 cpu33: <ACPI CPU> numa-domain 1 on acpi0 cpu34: <ACPI CPU> numa-domain 1 on acpi0 cpu35: <ACPI CPU> numa-domain 1 on acpi0 cpu36: <ACPI CPU> numa-domain 1 on acpi0 cpu37: <ACPI CPU> numa-domain 1 on acpi0 cpu38: <ACPI CPU> numa-domain 1 on acpi0 cpu39: <ACPI CPU> numa-domain 1 on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 Event timer "HPET4" frequency 14318180 Hz quality 340 Event timer "HPET5" frequency 14318180 Hz quality 340 Event timer "HPET6" frequency 14318180 Hz quality 340 Event timer "HPET7" frequency 14318180 Hz quality 340 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 pcib0: _OSC returned error 0x10 pci0: <ACPI PCI bus> numa-domain 0 on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci0 pci1: <ACPI PCI bus> numa-domain 0 on pcib1 pcib2: <ACPI PCI-PCI bridge> mem 0xd0c00000-0xd0c03fff irq 26 at device 0.0 numa-domain 0 on pci1 pci2: <ACPI PCI bus> numa-domain 0 on pcib2 pcib3: <PCI-PCI bridge> irq 26 at device 8.0 numa-domain 0 on pci2 pci3: <PCI bus> numa-domain 0 on pcib3 isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0x2100-0x21ff,0x2000-0x20ff mem 0x38007f800000-0x38007f807fff,0x38007f000000-0x38007f7fffff irq 26 at device 0.0 numa-domain 0 on pci3 pcib4: <ACPI PCI-PCI bridge> irq 47 at device 1.1 numa-domain 0 on pci0 pci4: <ACPI PCI bus> numa-domain 0 on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 47 at device 2.0 numa-domain 0 on pci0 pci5: <ACPI PCI bus> numa-domain 0 on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 47 at device 2.2 numa-domain 0 on pci0 pci6: <ACPI PCI bus> numa-domain 0 on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 47 at device 3.0 numa-domain 0 on pci0 pci7: <ACPI PCI bus> numa-domain 0 on pcib7 pcib8: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci0 pci8: <ACPI PCI bus> numa-domain 0 on pcib8 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Patsburg USB 2.0 controller> mem 0xd0d20000-0xd0d203ff irq 22 at device 26.0 numa-domain 0 on pci0 usbus0: EHCI version 1.0 usbus0 numa-domain 0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib9: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci0 pci9: <ACPI PCI bus> numa-domain 0 on pcib9 igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x1060-0x107f mem 0xd0960000-0xd097ffff,0xd09b0000-0xd09b3fff irq 16 at device 0.0 numa-domain 0 on pci9 igb0: Using MSIX interrupts with 9 vectors igb0: Ethernet address: 00:1e:67:a2:78:6e igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 igb0: Bound queue 4 to cpu 4 igb0: Bound queue 5 to cpu 5 igb0: Bound queue 6 to cpu 6 igb0: Bound queue 7 to cpu 7 igb0: netmap queues/slots: TX 8/1024, RX 8/1024 igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x1040-0x105f mem 0xd0940000-0xd095ffff,0xd09a0000-0xd09a3fff irq 17 at device 0.1 numa-domain 0 on pci9 igb1: Using MSIX interrupts with 9 vectors igb1: Ethernet address: 00:1e:67:a2:78:6f igb1: Bound queue 0 to cpu 8 igb1: Bound queue 1 to cpu 9 igb1: Bound queue 2 to cpu 10 igb1: Bound queue 3 to cpu 11 igb1: Bound queue 4 to cpu 12 igb1: Bound queue 5 to cpu 13 igb1: Bound queue 6 to cpu 14 igb1: Bound queue 7 to cpu 15 igb1: netmap queues/slots: TX 8/1024, RX 8/1024 igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x1020-0x103f mem 0xd0920000-0xd093ffff,0xd0990000-0xd0993fff irq 18 at device 0.2 numa-domain 0 on pci9 igb2: Using MSIX interrupts with 9 vectors igb2: Ethernet address: 00:1e:67:a2:78:70 igb2: Bound queue 0 to cpu 16 igb2: Bound queue 1 to cpu 17 igb2: Bound queue 2 to cpu 18 igb2: Bound queue 3 to cpu 19 igb2: Bound queue 4 to cpu 20 igb2: Bound queue 5 to cpu 21 igb2: Bound queue 6 to cpu 22 igb2: Bound queue 7 to cpu 23 igb2: netmap queues/slots: TX 8/1024, RX 8/1024 igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x1000-0x101f mem 0xd0900000-0xd091ffff,0xd0980000-0xd0983fff irq 19 at device 0.3 numa-domain 0 on pci9 igb3: Using MSIX interrupts with 9 vectors igb3: Ethernet address: 00:1e:67:a2:78:71 igb3: Bound queue 0 to cpu 24 igb3: Bound queue 1 to cpu 25 igb3: Bound queue 2 to cpu 26 igb3: Bound queue 3 to cpu 27 igb3: Bound queue 4 to cpu 28 igb3: Bound queue 5 to cpu 29 igb3: Bound queue 6 to cpu 30 igb3: Bound queue 7 to cpu 31 igb3: netmap queues/slots: TX 8/1024, RX 8/1024 pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0 pci10: <ACPI PCI bus> numa-domain 0 on pcib10 vgapci0: <VGA-compatible display> mem 0xea000000-0xeaffffff,0xd0810000-0xd0813fff,0xd0000000-0xd07fffff irq 19 at device 0.0 numa-domain 0 on pci10 vgapci0: Boot video device ehci1: <Intel Patsburg USB 2.0 controller> mem 0xd0d10000-0xd0d103ff irq 20 at device 29.0 numa-domain 0 on pci0 usbus1: EHCI version 1.0 usbus1 numa-domain 0 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib11: <ACPI PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0 pci11: <ACPI PCI bus> numa-domain 0 on pcib11 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 isa0: <ISA bus> numa-domain 0 on isab0 ahci0: <Intel Patsburg AHCI SATA controller> port 0x3070-0x3077,0x3060-0x3063,0x3050-0x3057,0x3040-0x3043,0x3020-0x303f mem 0xd0d00000-0xd0d007ff irq 21 at device 31.2 numa-domain 0 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib12: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 pcib12: _OSC returned error 0x10 pci12: <ACPI PCI bus> numa-domain 1 on pcib12 pcib13: <ACPI PCI-PCI bridge> irq 71 at device 2.0 numa-domain 1 on pci12 pci13: <ACPI PCI bus> numa-domain 1 on pcib13 acpi_button0: <Sleep Button> on acpi0 acpi_syscontainer0: <System Container> on acpi0 acpi_syscontainer1: <System Container> on acpi0 pcib14: <ACPI Host-PCI bridge> on acpi0 pci14: <ACPI PCI bus> on pcib14 pci14: <dasp, performance counters> at device 14.1 (no driver attached) pci14: <dasp, performance counters> at device 19.1 (no driver attached) pci14: <dasp, performance counters> at device 19.5 (no driver attached) pci14: <dasp, performance counters> at device 19.6 (no driver attached) pcib15: <ACPI Host-PCI bridge> on acpi0 pci15: <ACPI PCI bus> on pcib15 pci15: <dasp, performance counters> at device 14.1 (no driver attached) pci15: <dasp, performance counters> at device 19.1 (no driver attached) pci15: <dasp, performance counters> at device 19.5 (no driver attached) pci15: <dasp, performance counters> at device 19.6 (no driver attached) uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 est1: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu1 est2: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu2 est3: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu3 est4: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu4 est5: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu5 est6: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu6 est7: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu7 est8: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu8 est9: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu9 est10: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu10 est11: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu11 est12: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu12 est13: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu13 est14: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu14 est15: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu15 est16: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu16 est17: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu17 est18: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu18 est19: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu19 est20: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu20 est21: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu21 est22: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu22 est23: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu23 est24: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu24 est25: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu25 est26: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu26 est27: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu27 est28: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu28 est29: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu29 est30: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu30 est31: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu31 est32: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu32 est33: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu33 est34: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu34 est35: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu35 est36: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu36 est37: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu37 est38: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu38 est39: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu39 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec random: unblocking device. ipmi0: IPMI device rev. 1, firmware rev. 1.21, version 2.0 ipmi0: Number of channels 4 ipmi0: Attached watchdog ugen0.1: <Intel EHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub2 numa-domain 0 on uhub0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub3 numa-domain 0 on uhub1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 da1 at isci0 bus 0 scbus0 target 1 lun 0 da0 at isci0 bus 0 scbus0 target 0 lun 0 da2 at isci0 bus 0 scbus0 target 2 lun 0 da3 at isci0 bus 0 scbus0 target 3 lun 0 cd0 at ahcich3 bus 0 scbus5 target 0 lun 0 da1: <ATA ST2000NM0033-9ZM 0001> Fixed Direct Access SPC-3 SCSI device da1: Serial Number Z1X03AD2 da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 1907729MB (3907029168 512 byte sectors) cd0: <TSSTcorp CDDVDW SH-224DB SB01> Removable CD-ROM SCSI device cd0: Serial Number R93E6YBDC04JHR cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed da0: da2: da3: <ATA ST4000NM0033-9ZM SN03> Fixed Direct Access SPC-3 SCSI device da3: Serial Number Z1Z30HMD da3: 300.000MB/s transfers<ATA ST4000NM0033-9ZM SN03> Fixed Direct Access SPC-3 SCSI device da2: Serial Number Z1Z341YS da2: 300.000MB/s transfers da2: Command Queueing enabled da2: 3815447MB (7814037168 512 byte sectors) da3: Command Queueing enabled da3: 3815447MB (7814037168 512 byte sectors) <ATA ST2000NM0033-9ZM 0001> Fixed Direct Access SPC-3 SCSI device da0: Serial Number Z1X03HQM da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 1907729MB (3907029168 512 byte sectors) ses0 at ahciem0 bus 0 scbus8 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: pass4,cd0 in 'Slot 03', SATA Slot: scbus5 target 0 Trying to mount root from zfs:syspool/freebsd_11_4 []... uhub2: 6 ports with 6 removable, self powered Root mount waiting for: usbus1 usbus0 uhub3: 8 ports with 8 removable, self powered ugen1.3: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus1 ukbd0 numa-domain 0 on uhub3 ukbd0: <Keyboard Interface> on usbus1 kbd2 at ukbd0 Root mount waiting for: usbus1 usbus0 ugen1.4: <Rextron USB> at usbus1 ukbd1 numa-domain 0 on uhub3 ukbd1: <USB> on usbus1 kbd3 at ukbd1 Root mount waiting for: usbus0 Root mount waiting for: usbus0 ugen0.3: <Seagate Basic> at usbus0 umass0 numa-domain 0 on uhub2 umass0: <Seagate Basic, class 0/0, rev 2.10/0.00, addr 3> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0xc101 umass0:9:0: Attached to scbus9 ugen0.3: <Seagate Basic> at usbus0 (disconnected) umass0: at uhub2, port 6, addr 3 (disconnected) (da4:umass-sim0:0:0:0): got CAM status 0x44 (da4:umass-sim0:0:0:0): fatal error, failed to attach to device g_access(952): provider da4 has error 6 set g_access(952): provider da4 has error 6 set g_access(952): provider da4 has error 6 set g_access(952): provider da4 has error 6 set umass0: detached