Bug 29465
| Summary: | [sound] Can't probe NeoMagic 256AX audio chip. | ||
|---|---|---|---|
| Product: | Base System | Reporter: | Tomohiro Ishihara <sho> |
| Component: | kern | Assignee: | freebsd-multimedia (Nobody) <multimedia> |
| Status: | Closed FIXED | ||
| Severity: | Affects Only Me | ||
| Priority: | Normal | ||
| Version: | 4.4-PRERELEASE | ||
| Hardware: | Any | ||
| OS: | Any | ||
|
Description
Tomohiro Ishihara
2001-08-05 07:30:00 UTC
Responsible Changed From-To: freebsd-bugs->sound Sound issue Please re-add the block you commented out and send the full dmesg output of a verbose boot (``boot -v''). -- +-------------------+---------------------+ | George Reid | FreeBSD Committer | | +44 7740 197460 | greid@FreeBSD.org | +-------------------+---------------------+ > Please re-add the block you commented out and send the full dmesg output > of a verbose boot (``boot -v''). I commented out the following parts. --- /* Try to catch other non-ac97 cards */ if (i == NUM_BADCARDS) { if (!(sc = malloc(sizeof(*sc), M_DEVBUF, M_NOWAIT | M_ZERO))) { device_printf(dev, "cannot allocate softc\n"); return ENXIO; } data = pci_read_config(dev, PCIR_COMMAND, 2); pci_write_config(dev, PCIR_COMMAND, data | PCIM_CMD_PORTEN | PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN, 2); sc->regid = PCIR_MAPS + 4; sc->reg = bus_alloc_resource(dev, SYS_RES_MEMORY, &sc->regid, 0, ~0, 1, RF_ACTIVE); if (!sc->reg) { device_printf(dev, "unable to map register space\n"); pci_write_config(dev, PCIR_COMMAND, data, 2); free(sc, M_DEVBUF); return ENXIO; } if ((nm_rd(sc, NM_MIXER_PRESENCE, 2) & NM_PRESENCE_MASK) != NM_PRESENCE_VALUE) { i = 0; /* non-ac97 card, but not listed */ DEB(device_printf(dev, "subdev = 0x%x - badcard?\n", subdev)); } pci_write_config(dev, PCIR_COMMAND, data, 2); bus_release_resource(dev, SYS_RES_MEMORY, sc->regid, sc->reg); free(sc, M_DEVBUF); } --- This is output of dmesg when I didn't comment out the above. --- Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-PRERELEASE #28: Sun Aug 5 14:19:12 JST 2001 sho@LED:/usr/src/sys/compile/NewKern Calibrating clock(s) ... TSC clock: 645220357 Hz, i8254 clock: 1193217 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon/Celeron (645.20-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 201261056 (196544K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x004eb000 - 0x0bfe7fff, 196071424 bytes (47869 pages) avail memory = 190947328 (186472K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f6cf0 bios32: Entry = 0xfd890 (c00fd890) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x13d pnpbios: Found PnP BIOS data at 0xc00f6d20 pnpbios: Entry = f0000:a5f3 Rev = 1.0 Other BIOS signatures found: ACPI: 000f6cb0 Preloaded elf kernel "kernel" at 0xc04c5000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x80003904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base dd800000, size 22 found-> vendor=0x8086, dev=0x7191, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x10f7, dev=0x8317, revid=0x02 class=07-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base 00001080, size 7 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 00001050, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=10 map[20]: type 1, range 32, base 0000fc20, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x03 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 00001040, size 4 found-> vendor=0x134d, dev=0x7890, revid=0x02 class=07-03-01, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base 00001400, size 6 found-> vendor=0x1180, dev=0x0476, revid=0x80 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=2 secondarybus=2 intpin=a, irq=10 found-> vendor=0x1180, dev=0x0476, revid=0x80 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=3 secondarybus=3 intpin=b, irq=10 found-> vendor=0x8086, dev=0x1229, revid=0x08 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base dd100000, size 12 map[14]: type 1, range 32, base 00001440, size 6 map[18]: type 1, range 32, base dd000000, size 20 pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 found-> vendor=0x10c8, dev=0x0005, revid=0x20 class=03-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base de000000, size 24 map[14]: type 1, range 32, base dd400000, size 22 map[18]: type 1, range 32, base dd200000, size 20 found-> vendor=0x10c8, dev=0x8005, revid=0x20 class=04-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=10 map[10]: type 1, range 32, base ddc00000, size 22 map[14]: type 1, range 32, base dd300000, size 20 pci1: <PCI bus> on pcib1 pci1: <NeoMagic MagicMedia 256AV SVGA controller> (vendor=0x10c8, dev=0x0005) at 0.0 irq 10 chip1: <NeoMagic MagicMedia 256AX Audio controller> mem 0xdd300000-0xdd3fffff,0xddc00000-0xddffffff irq 10 at device 0.1 on pci1 pci0: <unknown card> (vendor=0x10f7, dev=0x8317) at 4.0 irq 9 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1050 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1058 ata1: mask=03 status0=50 status1=01 ata1: mask=03 ostat0=50 ostat2=01 ata1-master: ATAPI probe a=14 b=eb ata1-slave: ATAPI probe a=ff b=ff ata1: mask=03 status0=00 status1=01 ata1-slave: ATA probe a=00 b=ff ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfc20-0xfc3f irq 10 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip2: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0 pci0: <unknown card> (vendor=0x134d, dev=0x7890) at 9.0 irq 9 pcic-pci0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 10 at device 10.0 on pci0 pcic-pci0: Legacy address set to 0x3e0 PCI Config space: 00: 04761180 02100007 06070080 00824000 10: 00000000 020000dc 40020200 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 0780010a 40: 832e10f7 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00000001 00000000 04630463 00000000 90: 00000000 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ff53: f000ff53: f000e2c3: f000ff53: 10: f000ff53: f000ff54: f000924a: f000ff53: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 pcic-pci1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 10 at device 10.1 on pci0 PCI Config space: 00: 04761180 02100007 06070080 00824000 10: 00000000 020000dc 40030300 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 0780020a 40: 832e10f7 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00000001 00000000 04630463 00000000 90: 00000000 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ff53: f000ff53: f000e2c3: f000ff53: 10: f000ff53: f000ff54: f000924a: f000ff53: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1440-0x147f mem 0xdd000000-0xdd0fffff,0xdd100000-0xdd100fff irq 9 at device 11.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:80:45:10:f7:a1 fxp0: PCI IDs: 8086 1229 10f7 832e 0008 fxp0: Chip Type: 0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xdc000-0xdffff,0xe0000-0xeffff on isa0 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 adv0 failed to probe on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) pcm0 failed to probe at port 0x530-0x537,0xf8c-0xf94,0xe0e irq 10 drq 1 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0: <Intel i82365SL-A/B> at port 0x3e0 iomem 0xd0000 irq 11 on isa0 pcic0: management irq 11 pccard0: <PC Card bus (classic)> on pcic0 pccard1: <PC Card bus (classic)> on pcic0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c400, tty 631092, net 671292 bpf: sl0 attached bpf: faith0 attached ata0-master: success setting UDMA2 on Intel chip Creating DISK ad0 ad0: <TOSHIBA MK2016GAP/U0.22 A> ATA-5 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 ad0: 19077MB <TOSHIBA MK2016GAP> [38760/16/63] at ata0-master UDMA33 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <UJDA310/3.53> CD-RW drive at ata1 as master acd0: read 3445KB/s (3445KB/s) write 689KB/s (689KB/s), 2048KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: CD-R, CD-RW, test write acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad0s2a ad0s1: type 0xc, start 63, end = 10249469, size 10249407 : OK ad0s2: type 0xa5, start 10249470, end = 39070079, size 28820610 : OK start_init: trying /sbin/init IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled Linux-ELF exec handler installed --- And this is output of dmesg when I commented out the above. --- Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-PRERELEASE #31: Mon Aug 6 07:56:10 JST 2001 sho@LED:/usr/src/sys/compile/NewKern Calibrating clock(s) ... TSC clock: 645236128 Hz, i8254 clock: 1193247 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon/Celeron (645.20-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 201261056 (196544K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x004eb000 - 0x0bfe7fff, 196071424 bytes (47869 pages) avail memory = 190947328 (186472K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f6cf0 bios32: Entry = 0xfd890 (c00fd890) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x13d pnpbios: Found PnP BIOS data at 0xc00f6d20 pnpbios: Entry = f0000:a5f3 Rev = 1.0 Other BIOS signatures found: ACPI: 000f6cb0 Preloaded elf kernel "kernel" at 0xc04c5000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x80003904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base dd800000, size 22 found-> vendor=0x8086, dev=0x7191, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x10f7, dev=0x8317, revid=0x02 class=07-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base 00001080, size 7 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 00001050, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=10 map[20]: type 1, range 32, base 0000fc20, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x03 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 00001040, size 4 found-> vendor=0x134d, dev=0x7890, revid=0x02 class=07-03-01, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base 00001400, size 6 found-> vendor=0x1180, dev=0x0476, revid=0x80 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=2 secondarybus=2 intpin=a, irq=10 found-> vendor=0x1180, dev=0x0476, revid=0x80 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=3 secondarybus=3 intpin=b, irq=10 found-> vendor=0x8086, dev=0x1229, revid=0x08 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base dd100000, size 12 map[14]: type 1, range 32, base 00001440, size 6 map[18]: type 1, range 32, base dd000000, size 20 pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 found-> vendor=0x10c8, dev=0x0005, revid=0x20 class=03-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base de000000, size 24 map[14]: type 1, range 32, base dd400000, size 22 map[18]: type 1, range 32, base dd200000, size 20 found-> vendor=0x10c8, dev=0x8005, revid=0x20 class=04-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=10 map[10]: type 1, range 32, base ddc00000, size 22 map[14]: type 1, range 32, base dd300000, size 20 pci1: <PCI bus> on pcib1 pci1: <NeoMagic MagicMedia 256AV SVGA controller> (vendor=0x10c8, dev=0x0005) at 0.0 irq 10 pcm0: <NeoMagic 256AV> mem 0xdd300000-0xdd3fffff,0xddc00000-0xddffffff irq 10 at device 0.1 on pci1 pcm0: ac97 codec id 0x83847609 (SigmaTel STAC9721/9723) pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: ac97 primary codec extended features AMAP pcm0: rec buf 0xc9b7e800 pcm0: play buf 0xc9b7a800 pci0: <unknown card> (vendor=0x10f7, dev=0x8317) at 4.0 irq 9 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1050 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1058 ata1: mask=03 status0=50 status1=01 ata1: mask=03 ostat0=50 ostat2=01 ata1-master: ATAPI probe a=14 b=eb ata1-slave: ATAPI probe a=ff b=ff ata1: mask=03 status0=00 status1=01 ata1-slave: ATA probe a=00 b=ff ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfc20-0xfc3f irq 10 at device 7.2 on pci0 using shared irq10. usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0 pci0: <unknown card> (vendor=0x134d, dev=0x7890) at 9.0 irq 9 pcic-pci0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 10 at device 10.0 on pci0 pcic-pci0: Legacy address set to 0x3e0 PCI Config space: 00: 04761180 02100007 06070080 00824000 10: 00000000 020000dc 40020200 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 0780010a 40: 832e10f7 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00000001 00000000 04630463 00000000 90: 00000000 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ff53: f000ff53: f000e2c3: f000ff53: 10: f000ff53: f000ff54: f000924a: f000ff53: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 pcic-pci1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 10 at device 10.1 on pci0 PCI Config space: 00: 04761180 02100007 06070080 00824000 10: 00000000 020000dc 40030300 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 0780020a 40: 832e10f7 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00000001 00000000 04630463 00000000 90: 00000000 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ff53: f000ff53: f000e2c3: f000ff53: 10: f000ff53: f000ff54: f000924a: f000ff53: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1440-0x147f mem 0xdd000000-0xdd0fffff,0xdd100000-0xdd100fff irq 9 at device 11.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:80:45:10:f7:a1 fxp0: PCI IDs: 8086 1229 10f7 832e 0008 fxp0: Chip Type: 0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xdc000-0xdffff,0xe0000-0xeffff on isa0 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 adv0 failed to probe on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0: <Intel i82365SL-A/B> at port 0x3e0 iomem 0xd0000 irq 11 on isa0 pcic0: management irq 11 pccard0: <PC Card bus (classic)> on pcic0 pccard1: <PC Card bus (classic)> on pcic0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c400, tty 631492, net 671692 bpf: sl0 attached bpf: faith0 attached ata0-master: success setting UDMA2 on Intel chip Creating DISK ad0 ad0: <TOSHIBA MK2016GAP/U0.22 A> ATA-5 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 ad0: 19077MB <TOSHIBA MK2016GAP> [38760/16/63] at ata0-master UDMA33 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <UJDA310/3.53> CD-RW drive at ata1 as master acd0: read 3445KB/s (3445KB/s) write 689KB/s (689KB/s), 2048KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: CD-R, CD-RW, test write acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad0s2a ad0s1: type 0xc, start 63, end = 10249469, size 10249407 : OK ad0s2: type 0xa5, start 10249470, end = 39070079, size 28820610 : OK start_init: trying /sbin/init IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled Linux-ELF exec handler installed pcm0: play interrupt timeout, channel dead --- -- Tomohiro Ishihara(sho) mail:sho-red@ff.iij4u.or.jp PGP Fingerprint:D627 90C5 549E D15A 06E8 A39B CBE3 9D3 State Changed From-To: open->feedback Does this still apply to 5.[34] or -current? State Changed From-To: feedback->closed Fixed in -current. |
