Bug 41938
| Summary: | Dynalink L100C16 pccard.conf. | ||
|---|---|---|---|
| Product: | Base System | Reporter: | marcov <marcov> |
| Component: | conf | Assignee: | Warner Losh <imp> |
| Status: | Closed FIXED | ||
| Severity: | Affects Only Me | ||
| Priority: | Normal | ||
| Version: | 4.6-RELEASE | ||
| Hardware: | Any | ||
| OS: | Any | ||
Responsible Changed From-To: freebsd-bugs->imp Warner is Mr. pccard.conf. State Changed From-To: open->closed Committed. State Changed From-To: open->closed committed. State Changed From-To: open->closed committed. |
Vendor: Dynalink (Tulip.com all over the box??!?) card lc100c16 (16 bit 10/100 UTP) This card isn't autodetected (not in pccard database) Fix: Add to pccard.conf database: card "Dynalink" "L100C16" config auto "ed0" ? 0x9 insert /etc/pccard_ether ed0 link0 -link1 remove /sbin/ifconfig ed0 delete ---------- dumpcis data : (for people that know what to look for, and want to improve the above working config) Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x15 (Version 1 info), length = 26 000: 04 01 44 79 6e 61 6c 69 6e 6b 00 4c 31 30 30 43 010: 31 36 00 56 00 31 2e 30 00 ff Version = 4.1, Manuf = [Dynalink], card vers = [L100C16] Addit. info = [V],[1.0] Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: ff ff 90 10 PCMCIA ID = 0xffff, OEM ID = 0x1090 Tuple #4, code = 0x1a (Configuration map), length = 5 000: 01 01 c0 03 63 Reg len = 2, config register addr = 0x3c0, last config = 0x1 Registers: XX---XX- Tuple #5, code = 0x1b (Configuration entry), length = 11 000: c7 81 19 07 55 4d 5d 65 30 ff ff Config index = 0x7(default) Interface byte = 0x81 (I/O) wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Card decodes 5 address lines, full 8/16 Bit I/O IRQ modes: Level IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Tuple #6, code = 0x1b (Configuration entry), length = 7 000: 07 08 ca 60 00 03 1f Config index = 0x7 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x300 block length = 0x20 Tuple #7, code = 0x1b (Configuration entry), length = 7 000: 07 08 ca 60 20 03 1f Config index = 0x7 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x320 block length = 0x20 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 07 08 ca 60 40 03 1f Config index = 0x7 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x340 block length = 0x20 Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 07 08 ca 60 60 03 1f Config index = 0x7 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x360 block length = 0x20 Tuple #10, code = 0x1b (Configuration entry), length = 7 000: 07 08 ca 60 00 02 1f Config index = 0x7 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x200 block length = 0x20 Tuple #11, code = 0x1b (Configuration entry), length = 7 000: 07 08 ca 60 20 02 1f Config index = 0x7 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x220 block length = 0x20 Tuple #12, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #13, code = 0x22 (Functional EXT), length = 2 000: 01 02 Network technology: Ethernet Tuple #14, code = 0x22 (Functional EXT), length = 2 000: 02 64 Wrong length for network extension tuple Tuple #15, code = 0x22 (Functional EXT), length = 2 000: 03 01 Network media: UTP Tuple #16, code = 0xff (Terminator), length = 0 2 slots found How-To-Repeat: insert card, nothing happens.