Bug 61303

Summary:	5.2-REL hangs during boot with 3-port pyramid.de NIC (worked on 4.7-4.9)
Product:	Base System	Reporter:	pi <pi>
Component:	i386	Assignee:	Remko Lodder <remko>
Status:	Closed FIXED
Severity:	Affects Only Me	CC:	pi
Priority:	Normal
Version:	5.2-RELEASE
Hardware:	Any
OS:	Any

Description pi 2004-01-13 09:20:17 UTC

There is a vendor in Germany for 3-port NICs based on the
Intel 82559ER Embedded 10/100 Ethernet chip:

http://www.pyramid.de/d/builttosuit/3nic.shtml?id=4

When this board is installed, the 5.2 REL iso does not boot.
It hungs right after the PCI bridge is detected.

Here's the output of pciconv -l -v on a freebsd 4.9 system:

pcib3@pci2:12:0:        class=0x060400 card=0x000000dc chip=0xb1528086 rev=0x00 
hdr=0x01
    vendor   = 'Intel Corporation'
    device   = 'S21152BB PCI to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
fxp0@pci3:0:0:  class=0x020000 card=0x00000000 chip=0x12098086 rev=0x09 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82559ER Fast Ethernet Controller'
    class    = network
    subclass = ethernet
fxp1@pci3:1:0:  class=0x020000 card=0x00000000 chip=0x12098086 rev=0x09 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82559ER Fast Ethernet Controller'
    class    = network
    subclass = ethernet
fxp2@pci3:2:0:  class=0x020000 card=0x00000000 chip=0x12098086 rev=0x09 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82559ER Fast Ethernet Controller'
    class    = network
    subclass = ethernet
none6@pci3:3:0: class=0x070103 card=0x00001415 chip=0x84031415 rev=0x00 hdr=0x00
    vendor   = 'Oxford Semiconductor Ltd'
    device   = 'OX12PCI840 PCI Parallel Port'
    class    = simple comms
    subclass = parallel port

On a 4.9, it is detected during bootup as

pcib3: <PCI to PCI bridge (vendor=8086 device=b152)> at device 12.0 on pci2
pci3: <PCI bus> on pcib3
fxp0: <Intel 82559ER Embedded 10/100 Ethernet> port 0xb800-0xb83f mem 0xe8800000
-0xe881ffff,0xe9000000-0xe9000fff irq 10 at device 0.0 on pci3
fxp0: Ethernet address 00:50:c2:01:fc:0c
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82559ER Embedded 10/100 Ethernet> port 0xb400-0xb43f mem 0xe7800000
-0xe781ffff,0xe8000000-0xe8000fff irq 9 at device 1.0 on pci3
fxp1: Ethernet address 00:50:c2:01:fc:0d
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2: <Intel 82559ER Embedded 10/100 Ethernet> port 0xb000-0xb03f mem 0xe6800000
-0xe681ffff,0xe7000000-0xe7000fff irq 9 at device 2.0 on pci3
fxp2: Ethernet address 00:50:c2:01:fc:0e
inphy2: <i82555 10/100 media interface> on miibus2
inphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci3: <unknown card> (vendor=0x1415, dev=0x8403) at 3.0 irq 11

On a 5.2, it hungs after the

pci3: <PCI bus> on pcib3

Fix: 

No idea right now.
How-To-Repeat: 
Boot 5.2 ISO, wait for system hang.

Comment 1 pi 2004-01-22 05:08:28 UTC

> On a 5.2, it hungs after the
> 
> pci3: <PCI bus> on pcib3
> 
> 
> >How-To-Repeat:
> 
> Boot 5.2 ISO, wait for system hang.
> 
> >Fix:
> 
> No idea right now.

Tried the following approaches:
- BIOS-update (Board: P4PE) from 1002 to 1007, no change.
- Installed 5.2 on a different system, compiled kernel without fxp. No change.

-- 
MfG/Best regards, Kurt Jaeger                                  16 years to go !
LF.net GmbH        fon +49 711 90074-23  pi@LF.net  
Ruppmannstr. 27    fax +49 711 90074-33
D-70565 Stuttgart  mob +49 171 3101372

Comment 2 pi 2004-01-23 21:30:06 UTC

Hi!

> > On a 5.2, it hungs after the
> > 
> > pci3: <PCI bus> on pcib3
> > 
> > 
> > >How-To-Repeat:
> > 
> > Boot 5.2 ISO, wait for system hang.
> > 
> > >Fix:
> > 
> > No idea right now.
> 
> Tried the following approaches:
> - BIOS-update (Board: P4PE) from 1002 to 1007, no change.
> - Installed 5.2 on a different system, compiled kernel without fxp. No change.

After some card juggling:

There was an Level1 PCMCIA adapter card installed as well, which
in combination with the 3port fxp ethernet board caused the hung system.

The Level1 PCMCIA and the 3port fxp ethernet played well together
inside a downstripped MicroStar (MSI) MS-6714 GEM-L board,
http://www.msicomputer.com/product/detail_spec/product_detail.asp?model=845GEM-L

Problem avoided for now by removing the PCMCIA adapter.

-- 
MfG/Best regards, Kurt Jaeger                                  16 years to go !
LF.net GmbH        fon +49 711 90074-23  pi@LF.net  
Ruppmannstr. 27    fax +49 711 90074-33
D-70565 Stuttgart  mob +49 171 3101372

Comment 3 Remko Lodder freebsd_committer

2006-09-04 00:58:20 UTC

State Changed
From-To: open->feedback

Were you able to solve this at all? I noticed a workaround 
but wondered whether the problem is still current..

Comment 4 Remko Lodder freebsd_committer

2006-09-04 00:58:20 UTC

Responsible Changed
From-To: freebsd-i386->remko

Grab the PR

Comment 5 Remko Lodder freebsd_committer

2006-09-11 11:06:10 UTC

State Changed
From-To: feedback->closed

feedback timeout